Why do my themes not work even when enabled?

I installed a theme and enabled it. There was a message to restart FF4, so I did, but when it started, it was still the default theme. I changed it back to default, restarted, changed it again to my preferred them, restarted again, and yet it was still default.

I had this & I think the reason was that I had just gotten a blue tooth headset which was turned on but I had taken it off. So I  think the sounds were going there.
Yes, after I figured that out, I turned the blue tooth headset off when I took it off. Now when I just checked the sounds, they are sounding on the phone.
I guess the same woud be true if you have any other blue tooth or other device like head set or speaker set up for sounds.

Similar Messages

  • Adobe Flash does not work, even when enabled.

    The Adobe Flash plugin doesn't seem to work. Well, it's there but doesn't show any Flash content. In other words, it just shows the background of the site (or blank). Sites are able to detect Flash if it's disabled. No other addons or plugins are interfering with it. I can't update Firefox or Flash.

    Hi,
    In summary
    * check IE works with Flash content at present
    * download and install Firefox 14+
    * uninstall Flash 11.3 and install Flash 10.3
    * post back with how you get on
    * note these are temporary workarounds until developers fix the problems.<br> Whilst these problems exist upgrading FlashPlayer as advised by Adobe Flash, or by Firefox's pluginchecker may not be a good idea.
    First of all I note you seem to be using the old Firefox 5. That is no longer supported and is not secure. I would suggest you update to Firefox 14 either by using the menu option
    * Help -> About Firefox ->Upgrade
    * or by visiting http://www.mozilla.org/en-US/firefox/all.html
    Secondly note there may be some problems with use of the current Flash 11.3 versions. Some Firefox users are needing to uninstall tht and downgrade to Flash Player 10.3 (older but secure) or Flash Player 11.2
    This problem has had developer attention for a few weeks but there is no sign of a proper solution yet. Note at least some of the problems relate to a new security feature ''protected mode'' used by FlashPlayer on windows systems above Windows XP.
    As a Windows user you may wir=sh to check if FlashPlayer works ok on Internet Explorer ? It should do. (But you may have problems if you follow the official advice to use an Adobe uninstaller, you may need to review the IE installation of FlashPlayer afterwards.)
    Note the fact that your problem relates to FlashPlayer 11.3 is at the moment no more than a guess, based on the number of known issues at present (and the sytsem information aside that indicates you are using flash 11.3).
    The current standard official advice is :
    Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox 13 are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
    In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
    [[Flash Plugin - Keep it up to date and troubleshoot problems]]
    [[Flash 11.3 crashes]]
    [[Flash 11.3 doesn't load video in Firefox]]
    Other, more technical information about these issues can be found under these Links:
    http://forums.adobe.com/thread/1018071?tstart=0
    http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
    --------------------------

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

  • My notification tone when set to 'Silent" is not working even when setup on lolipop

    my notification tone when set to 'Silent" is not working even when setup .
     My notification tone when set to  'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

    Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
    - Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
    - Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
    1) Browse to www.BBM.com/support/blackberry
    2) Locate the Need more help section is the bottom right of the page
    3) Select Contact us for additional assistance
    4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
    5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
    KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
    Daniel

  • Why is my microphone not working only when making calls ?

    Hello all,
    I have a problem with my Lenovo S930 Smartphone to fix urgently.
    (MTK6582 Quad Core 1.3GHz Android 4.2)
    The microphone is not working when making calls (so people don't hear me talking.)
    But strangely the microphone is working perfectly when recording videos.
    It seems to me like a application problem but I am no android specialist
    Where can I get help ? What can I do ?
    thanks in advance for your support
    Jean-Francois

    Go to settings>backup & reset...there should be a factory reset option.
    *Note: Settings names and location are firmware build number dependent.
    **Backup anything important first.
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Keyboard not working even when trying to go to BIOS

    Hi,
    I have IBM Thinkpad R60 9458 A13 laptop having Windows 7 ,today its keyboard is not working but in Windows its function keys like brightness or sound is responding without pressing Fn key.
    And no other letter or numeric key is responding.
    I tried to boot the laptop and trying to press Thinkvantage button, its not responding.
    I then inserted Windows 7 OS DVD and when prompt comes to press any key ..i tried all key but no help.
    I then clicked on Compatibility option to have keyboard on screen which is working fine.
    Pls advise what would have gone wrong
    Regards
    Sandeep

    Hi Sandeep,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that a few keys in the keypad of your Lenovo ThinkPad R60 is not working properly.
    Check if the keys are working in different applications. Some keys such as the function keys F1 through F12 will not work with every program. An easy way to test this is to open notepad or other word processing program and trying the key. Try getting into safe mode and see if the keys work. Remove the key from the keyboard and clean it. In some situations dirt, hair, dust, etc. can obstruct keys causing them not to work.
    Please try to get into BIOS mode and see if the keyboard is working there. Tap F1 key while system shows the Lenovo logo to get into BIOS.
    1. If you are able to use the keyboard in BIOS, it could be a software issue. I would recommend in that case to do a System Restore which will revert the settings in your system to a previous time.
    2. If keyboard doesn’t respond in BIOS as well, I strongly suggest you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Why does my ipad not work properly when charging

    when my ipad is plugged to charger it does not work properly  goes crazy

    Not sure what 'goes crazy' means but it most likely should not do that.  Try a reset... press the home and sleep/lock buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Also try it plugged into another outlet (on another circuit) and/or try another charger.

  • Homesharing not working even when activated on all my devices

    Hi everyone,
    I have not tried Homesharing in a long time, but everything I can remind is that it worked perfectly. So, I have not changed my setting, since yesterday I have uploaded itunes 11 and Remotes 3.0 (but it is the same in Music) Homesharing is not working : on my iPhone and iPad I get a message asking to activate the system on my computer using my Apple ID.
    Obviously I tried to re-activate it, but it was already in place.
    I tried to de-activate it, to re-activated it, same on all my idevices, but no changes.
    Does someone have a clue of what's happening to me ?
    I'm using OS X 10.8.2, iTunes 11, iOS 6.0.1 on both my iPhone and iPad.
    Thank you very much for your help.

    Exactly the same problem with the Remote App and Itunes 11 (and looking at this forum it is affecting a lot of people), tried a few different things with no joy.  Hopefully someone will find the solution soon.

  • Flash player not working even after enable it

    i have installed flash player last version but still not working , and i did enable it

    Hello,
    Please provide more details so that we may be able to assist you.
    What does 'not working' mean? What happens when you try to view Flash content?
    What is the OS version, browser type and version.
    Do you have Flash Player currently installed, if so what version?
    What steps did you take to install Flash Player
    Maria

  • Why expdp table mode not work even with EXP_FULL_DATABASE

    Hi All,
    i want to move several tables from schema A to schema B using expdp/impdp at database KTBDB.
    ktbdba is the db admin account of KTBDB.
    here is the expdb command:
    C:\Windows\system32>expdp ktbdba/password@KTBDB_TNS directory=tmp_dir dumpfile
    *=tabledumptest.dmp logfile=tabledumptest.log tables=a.dept;*
    but i got the three errors:
    ORA-39165: Schema A was not found.
    ORA-39166: Object DEPT; was not found.
    ORA-31655: no data or metadata objects selected for job
    the schema name and table name are correct.
    i can do this
    select from a.dept;*
    ktbdbs has the following dba privileges: *(select * from DBA_ROLE_PRIVS where grantee = 'KTBDBA' ORDER BY GRANTED_ROLE;)*
    APEX_ADMINISTRATOR_ROLE
    CONNECT
    CTXAPP
    DBA
    EJBCLIENT
    EXECUTE_CATALOG_ROLE
    EXP_FULL_DATABASE
    GATHER_SYSTEM_STATISTICS
    IMP_FULL_DATABASE
    JAVADEBUGPRIV
    JAVAIDPRIV
    JAVASYSPRIV
    JAVAUSERPRIV
    JAVA_ADMIN
    JAVA_DEPLOY
    MGMT_USER
    OEM_ADVISOR
    OEM_MONITOR
    OLAP_DBA
    OLAP_USER
    RECOVERY_CATALOG_OWNER
    RESOURCE
    SCHEDULER_ADMIN
    SELECT_CATALOG_ROLE
    WM_ADMIN_ROLE
    XDBADMIN
    XDBWEBSERVICES
    Do you have any clues why the three error happened?
    Thanks
    Edited by: user10833860 on Nov 22, 2010 8:46 AM

    now the problem is fixed by placing tables clause right after the connection string like this:
    expdp ktbdba/password@KTBDB_TNS tables=a.tabl1, a.tabl2, a.tabl3, a.tabl4 directory=tmp_dir dumpfile
    =tabledumptest.dmp logfile=tabledumptest.log;
    but i when i import a.tabl1 2 3 4 into another schema B. I got another error
    ORA-39002: invalid operation
    ORA-39040: Schema expression " IN ('A')" must identify exactly one schema.
    here is the impdp command:
    impdp tbdba/password@KTBDB_TNS tables=b.tabl1,b.tabl2,b.tabl3,b.tabl4 directory=tmp_dir dumpfile=tisbnk_ktbv_tbls_export.dmp logfile=tisbnk_ktbv_tbls_import.log;
    why did this happen.
    thanks

  • Tried to download latest update, system not compatible, now browser does not work even when I tried to download it again. I have bookmarks I'd like back.

    I currently have a Mac, version 10.5.8. My Firefox had been running slow so I tried to download the latest version. When it had downloaded, a message popped up saying that this version of Firefox is not compatible with my system. Well, 'no harm no foul' I figured and I tired to go back to my previous browser.
    But when I went to click on it, there was a large circle with a line through it. I couldn't open anything. Firefox had effectively been deleted from my computer.
    Now it's ok if I can't run Firefox anymore but I had thousands of bookmarks, compiled over years that I would really like back. And I have no idea how to do that.
    Any help would be greatly appreciated.

    The last version of Firefox available for OSX 10.5 was Firefox 16. Firefox versions 17-20 require OSX 10.6, 10.7 or 10.8 as well as an Intel processor (which you have).
    *System requirements Firefox 20 - https://www.mozilla.org/en-US/firefox/20.0/system-requirements/
    Running an old version of your OS is dangerous and makes your system vulnerable to attack by hackers. Visit the Apple site to see about upgrading to a newer major version of OSX.
    Using an old version of any internet-facing application on the internet makes your system vulnerable. You should always keep your system completely up to date.

  • My iphone 4 will not work even when it says connect to itunes and i do and the itunes says get ahold of serivce

    iphone 4 isn't letting go past the screen connect to itunes and i do and itunes says problem get ahold of servcie

    Then perhaps you should take it in for service...

  • Xfinity Toolbar will not show even when enabled and checked?

    The Xfinity Toolbar shows as if it should be seen in the "View Toolbars" area, and the space is there, but nothing shows in the space. I can't pinpoint when this started, but in previous versions of Firefox I'm sure I had use of this toolbar.

    orange Firefox button > Add-ons > Extensions = is that extension '''enabled'''?
    Beyond that it might be best to contact Comcast support. <br />
    http://forums.comcast.com/

  • Error Parser does not work, even in SSX3

    SunSudio Express (December 2006 release) introduces some interesting new features, but there are still problems. For the first time, I was able to debug Fortran 90 applications in Linux, but debugging is still very limited. Furthermore, the Fortran error parser does not work, even when compiling using Sun's f95 compiler. This is a heavy disadvantage. I assume that Fortran error parsing is not supported on Linux, although the tutorials don't make this point clear: In the Options window, there are settings concerning C/C++ (and its parser), but there are no similar options for the Fortran parser, even in "Advanced Setings" (which are similar to the old Options window). My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.
    I don't think that I'm doing something wrong, but I want to ask, just to be sure: has someone had seen the Fortran error parser working on Linux? What about Fortran word completion?

    SunSudio Express (December 2006 release) introduces some
    interesting new features, but there are still problems. For the first time,
    I was able to debug Fortran 90 applications in Linux, but debugging is
    still very limited. This is good to know that you were able to debug a f90 application
    on Linux. What problems do you see? Please, report them, and we
    will file them as bugs or RFEs (requests for enhancements).
    Furthermore, the Fortran error parser does not work, even when
    compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
    This is a heavy disadvantage. I assume that Fortran error parsing
    is not supported on Linux, although the tutorials don't make this
    point clear: Yes, it does not work yet on all platforms.
    In the Options window, there are settings concerning C/C++ (and
    its parser), but there are no similar options for the Fortran parser,
    even in "Advanced Settings" (which are similar to the old Options
    window). There will be similar options for Fortran.
    My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
    We do not target Debian system, but we assume everything
    should work there (we test on Red Hat and SUSE).
    Good to know that our assumption is correct :-)
    I don't think that I'm doing something wrong, but I want to ask, just
    to be sure: has someone had seen the Fortran error parser working
    on Linux? No. It does not work on Linux, and it does not work on other platforms.
    What about Fortran word completion? No, this feature is not implemented yet.
    Thanks you for trying Sun Studio 12 Express release and for your report.
    Nik

  • Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file bu

    Every time I open a pdf file which includes a javascript, a dialogue box pops up. I have a question why 'Do not show this message again' is not working even I checked on the checkbox. It should block the dialogue next time when I open the same pdf file but not working. What is the matter and how can I deal with it?

    I am trying it on Adobe Acrobat Reader 9.2.1. Tried to fix Hex code, and also tried 'edit-preference-trust manager'. I focusing on Adobe registries but still couldn't fix the problem.

Maybe you are looking for