Why do OTA updates place iPhone in DFU Mode

All current iOS updates have place my iPhone 6 into DFU mode during the update process.  I am sick of having to spend hours restoring my phone to factory condition, then updating the phone, and then restoring a backup.
I wish to know why this is repeatedly happening.
It is not my network, I have a 5 GHZ 50 GB service.
I am becoming increasingly frustrated with this repeated failure.
Eric

Did you try top use the 2.4GHz mode instead?
Check also the recommended settings for configuring your Wi-Fi router for use with iOS devices.

Similar Messages

  • HT201210 why i cant update my iphone 4s?

    why i cant update my iphone 4s? i tryed to updated by it saying they cant back up my phone please disconnect and reconnect again? i've done that many times but keep coming up same message again and again? please help!

    No way to know as you have provided no info at all about your issue.

  • Why after I updated my iPhone 4S to the new software it goes dim on its on? I have to hit the sleep button or go to setting to fix it.

    Why after I updated my iPhone 4S to the new software it goes dim on its on? I have to hit the sleep button or go to setting to fix it. This has to be a bug.

    Hello 6underwood,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
    Best of luck,
    Mario

  • Iphone in DFU Mode Ios 7 (not working)

    Hey guys, I was able to figure out how to fix the activation issue, however, I already put my iphone in dfu mode and on itunes it is not showing any devices. My computer makes a noise recognizing my iphone, but i am not getting any options in Itunes

    .

  • Hi All, I'm using an Iphone 4. Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes Home button   power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugg

    Hi All,
    I'm using an iphone 4.Last friday my iphone dead and not able to turn it on. I have tried to connect to itunes +Home button +  power button  it say's Iphone in DFU mode and asking to recover but when i click on restore it gives 1644 error. plz sugguest.
    my os version: 4.2
    Firmware: 02.10.04

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT4623 why cant i update my iphone to ios 6?

    I have an Iphone 3GS and I'm trying to update it to IOS 6 but its not letting me upgrade it. Until I upgrade it I cannot add any apps onto my phone. Someone please help.

    Hello Hana-Morris,
    I would be be concerned too if I was not able to update my iPhone.  If you have not resolved the issue, I recommend following the steps in the article below for an issue like this:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    As always, it is a good idea to create a backup before hand:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • [win 8] itunes not detecting iphone in DFU mode for restore/recovery

    Here is the story:
    Had my iphone 6 plus for about a month now. Today I hooked it up to my windows 8 machine and itunes (both fully updated to latest versions).
    Phone was detected fine, so I ran a full sync and backup to my local machine with itunes. No problem its all good.
    Then went to the updates section and it said I had a new one (8.1.2 or whatever I cant remember)
    I ran it, in itunes while the device was connected.
    It downloaded and was going through the install process... then the screen on my phone went to the "connecting to itunes" graphic (with the cord and the itunes app icon). Thats where it sat.
    So now it no longer appeared as a device in itunes either.
    OK... went to the forums.
    1) Tried all the reboots and uninstalls/reinstalls
    2) Tried booting and connecting in "Recovery mode" (default now as all I see is that connecting screen)
    3) Tried booting and connecting in DFU mode
    Neither mode was detecting the device with itunes but I am getting the chimes of connection for windows itself.
    I do see the device in my windows system hardware under "unspecified" as "Apple Mobile Device USB Driver" (and when i view details its model shows either Recovery or DFU mode depending on how I booted the device)
    So here I am... stuck with a phone in either DFU mode OR recovery mode on a botched ios update and itunes wont detect it on windows 8.x
    What can I do ?
    Looking for some creative or outside the box ideas here. I just want a reset and restore of the backup I made on local itunes today.
    If I can get the device back to even a factory reset, I am hoping itunes will detect it properly and can run a restore from it local storage.
    Really stuck and been on this for hours now.

    Hello joeldevil,
    I know you have tried uninstalling and a reinstall of iTunes, but have you checked out the additional troubleshooting steps to check the drivers to make sure that they are installed. There is also a section for what to do when your iPhone is in recovery mode and not seen in iTunes. One more thing you can try is to try your restore in another user. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    http://support.apple.com/en-us/TS1538
    Regards,
    -Norm G. 

  • Update Sent iPhone into Recovery Mode

    A friend told me about the update so I connected my iPhone to my computer and chose "Update." I got an error that ended with my phone in "Recovery Mode." iTunes recognizes it as an iPhone in recovery mode and I choose "Restore" but what seems to be most of the way through the restore I get an error saying (direct quote) "The iPhone "iPhone" could not be restored. An unknown error occurred (6)." After I first had problems I updated iTunes, but that didn't help. I'm on hold with phone support. I've yet to talk to anyone.

    I also experienced the "recovery mode" issue. After distilling some of the recent posts here and related topics, here's what I found worked for me. (1) Delete iTunes 7.6 update, download and install iTunes 7.6 from Apple's website. (Good idea to back up your iTunes library just in case). (2) If you have tried several restores of the iPhone without success, navigate to //user/library and delete the several backup files there. (3) Reset your iPhone (simultaneously press home and power key until Apple logo appears). Turn iPhone off (press power key until screen blanks). (4) Plug in your iPhone and you'll hopefully see that the software and firmware is being restored. (This takes a while). After that, you'll see the message that your iPhone files are being restored, however you have them set in iTunes. One note -- though I'm not sure why, having your iPhone plugged directly into your machine's USB port rather than through a hub may prevent device polling from corrupting the iPhone restore process. This worked for me -- not sure if similar process would work on Windows boxes or not. After about an hour of messing with it, now have updated iPhone fully functional (again) with new features.

  • Help!! Ipod couldn't update, so tried to DFU mode and it still wont update or even turn on!!

    Help! My Ipod touch won't update! When I try to update it gives me a "network timed out" error message. I have tried everything. Disabling my antivirus, turning off my firewall, changing the time sync. So I tried to restore it in DFU mode, but it still is givng me a "network timed out" message. Now my ipod is blank and won't restore or update. What can I do? Have gone both to the apple store and geek sqaud for help and both blame it on each other. Any ideas?

    Disabling the computer's security software (firewall and antivirus) usually resolves that error.

  • IPhone 3GS DFU mode won't show up in iTunes

    What am I doing wrong that my iPhone 3GS in DFU mode won't show up in iTunes?  If it will not show up in DFU mode in ITunes, then I am unable to jailbreak it with redsnow because it can not see it.  ITunes sees my phone when I am not in DFU mode but as soon as I go into DFU, it disappears and then the sound on the computer sounds like it is going to see it again but it never shows up in ITunes.  I am running Itunes 10.6 and Iphone 3GS 5.1.

    We Don't Talk about jailbreaking here.
    Sorry
    I Hope I Was Able To Help You Or Solve Your Question.
    Simmm
    If Someone Helped You, Click
    "This Helped Me"
    If Someone Solved Your Question, Click
    "This Solved My Question"

  • IPhone on DFU mode and NO POWER.

    Okay so I was syncing my iPhone 4 to my PC and it restarted with black screen and went into recovery mode, however, when I tried to restore it the screen went white and so I pressed the HOME + POWER at the same time and it went all the way to black screen. Now, it says the iPhone is on DFU mode and whenever I try to restore it, I am getting an error on iTunes.
    I would like to know what are my other options to power ON my iPhone so I can go to recovery mode?

    Any error number given?
    Connecting in recovery mode is the only way to restore, but you can try if you can connect to another computer.
    iOS: Recovery mode

  • Iphone 3G- DFU mode Help

    Hello,
    I have a Iphone 3g, I bought it about a year ago and have been very pleased with it until now. I was sitting in the car on my way to a hotel and noticed my iphone restarted, I let it do its thing and saw the apple logo, so I assumed that it was turning back on, so i went back to messing around on my new mabook. About 1 hour later I looked down and it was STILL on the loading screen with the apple logo. I have put it into recovery mode after about 2 hours of failing to restart it and make it work correctly.
    Now like many of us, I have ALOT of important things on my phone: Contacts, My music( which i did backup but the computer that it was backed up on broke..), Applications, notes, and just everything in general. I would really like to avoid restoring it but I guess I am going to have to. Although I would just like to know if I can back up my iphone while its in restore mode, before restoring and erasing it..
    Thank you in advance,
    Jacob

    Your iTunes library on your computer should be included with your computer's backup along with all other important data - documents, photos, contact info, etc., which should be stored on an external drive or some other external media used for backup purposes only. If your computer's hard drive fails, you''ll have a backup to restore your most important data from, or it can be restored from the backup with a new computer.
    There is no way to back up your iPhone while in recovery or DFU mode.

  • How to put iphone in DFU mode ?

    Hello,
    how i can put my iphone4 in DFU mode ?

    Step 1. Turn off your iPhone.
    Step 2. Hold down the power and home button.
    Step 3. When you see the Apple logo, release the power button but continue holding the home button down.
    Step 4. Open iTunes and wait for it to tell you that its in restore mode.
    Alternative Method:
    Step 1. Connect iphone to USB then listen to the sound when it connect and disconnect.
    Step 2. Hold the home and power buttons until hear the disconnect sound then release power button.
    Step 3. Wait until you hear another sound then release home button.

  • HT4972 Why cant I update my iphone 3G from iOS 4.2 to newer version

    Can't load any apps to my phone, not even ones I've had on before. tried restoring to factory settings etc.

    If you have the apps you downloaded before in your computer, you could sync your iPhone 3G and get the working apps back in your iPhone.  Since the 3G's hardware does not support the latest iOS and many app developers have updated their apps to use the new features of newer iPhones and newer iOS, those updated apps will not work on the 3G, but the older versions will and you can still sync them to your phone if you have those olders versions in your computer.

  • HT4972 why cant i update my iphone 2g

    I brought an iphone 2 a few weeks back and i want to update it to ios 5, is it possible?

    no it is no. that is as high as the iphone software can go

Maybe you are looking for

  • [SOLVED] Cannot boot custom ZEN-kernel (misconfigured .config)

    Last week I tried to build a custom ZEN kernel for my computer, using GCC 4.5 and Intel Atom optimization (setting CONFIG_MATOM=y) and as few kernel modules and options as possible. I based my settings on the Gentoo Wiki for Asus Eee Box B202 and the

  • Will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?

    hi there guys, will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ? I'm not sure if my machine is 64 bit - it is the current model base mac mini. Many thanks for any help you can offer ! Simon

  • Nested AGO function in OBIEE

    Hi , I am not able to understand the reason behind using Nested AGO functions. In one of the logical columns (Sales LastYear LastWeek) the mapping was in the following fashion: Ago(Ago("Core"."Fact - Retail Inventory Receipts"."Receipts Retail" , "Co

  • How do I monitor audio while importing?

    While importing from my cable TV, I Can see the incoming video but caan't hear the audio. I would be helpful if I could here the audio so I could go about my work and keep an ear on the feed. Then I would know when the feed is over without having to

  • APPLET tag missing CODE parameter

    We are planning to use WebStart for our swing_apps deployment. At the moment we use applets with Plug-In 1.3.1_04 I changed the html as follows: <OBJECT CODEBASE="http://java.sun.com/update/1.3.1/jinstall-1_3_1_04-win.cab" classid="clsid:8AD9C840-044