Why do pages that initially load on an external server flash white?

Why do pages that initially load on an external server flash white? When the pages are loaded you can switch between without and page flash.
Example: http://www.capacitydartford.com - watch inital load then go back. No white flash. Tried on all general browsers.
Is there anything I can do to stop this?
Thanks, James

Why do pages that initially load on an external server flash white? When the pages are loaded you can switch between without and page flash.
Example: http://www.capacitydartford.com - watch inital load then go back. No white flash. Tried on all general browsers.
Is there anything I can do to stop this?
Thanks, James

Similar Messages

  • When attempting to access a specific web page on my iPad, the page seems to load then quickly disappears (resembling a white/black we page). Other sites seem fine. Note this is also occurring when I use Chrome (to access the same page).

    When attempting to access a specific web site on my iPad http://www.sggplastering.co.uk the page seems to load then quickly disappears (resembling a white web page). Other sites seem fine.

    Thanks so much for addressing my question. Note that the site (www.xula.edu) was working with Safari this morning, but not this afternoon. I also have now been able to access it with Chrome (remember I could not access the site with Chrome initially). Essentially one time while the site was loading on Chrome I clicked another link on the site and opened a new tab for the link- the original page then loaded and now continues to load. I've been trying to do the same with Safari but the page loads and "goes to white" to quickly.
    Other notes: I've powered off my iPad (did not help) and restarted my iPad (also did not help). I can also access all other links (to other www.xula.edu related pages on the site using Safari - I find them via a google search)- it's just the home page that loads then goes to "white screen" very quickly. Thanks again for your reply - any help/advice provided is greatly appreciated.

  • How can I set or reset the page that is loaded when I open a new tab using Ctrl t ?? by

    I recently downloaded a program that has, as an undesired additional action, apprently setup Yahoo as the page that opens by default when I open a new tab using <Ctrl> <t> (or the <+> symbol on the tab bar). This is aggravating to me, particularly as I have not been able to find a way to stop it occurring.
    I expect that it is buried somewhere in my profile, but I also have not found a way to explore or edit the contents of my profile.
    There is a JScript script file called "user" in ...\profiles\4g4vpust.default that I suspect is associated with the behaviour, but renaming it achieved nothing.
    Prior to this, my new tabs used to open as blank pages, i.e. did not load any URL and I was happy with that. How can I get back to that state?

    Did it add the freeze net assistant add-on? That add-on is known to do this. If you have that add-on you can uninstall it Firefox should revert to the default behavior.
    If you do not have that add-on, another add-on will be causing this, you can use the procedure in the following link to identify what one - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Why do pages that consist solely of a jpg or png result in the message that the image cannot be displayed because it contains errors?

    Whenever I click on URL links to pages that consist solely of a jpeg or png, I get a text-only message 'the image cannot be displayed because it contains errors'. Yet if I copy the same URL and try it in IE, the image displays just fine. This has been happening for some time, thru several upgrades of Firefox.

    That is the default text that Firefox displays on a tab.<br />
    As soon as the image has loaded then that text is replaced by the image.
    If you keep seeing that text then something is blocking images.
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Using javascript or HTML, When I click a link to a named page that already loaded in a tabbed page the tabbed page does not show, but you can see that the page relaoded. Using HTML or javascript what script will make this happen? The javascript focus() fu

    If a page is already loaded into a tab then using any of the following scripts will not cause the tabbed page to show when the link to it is clicked (created via PHP):
    "Continue Shopping".
    OR
    "Continue Shopping".
    OR
    "Continue Shopping".
    The first HTML works perfectly in the Safari browser.
    == This happened ==
    Every time Firefox opened
    == Always

    The scripts for this should have shown as:

  • Page formats off after uploading to external server

    I have finally successfully uploaded my organization's site created in iWeb to an external server. However, the page formats changed a little in the process. Small things, like graphics shifting position, font sizes changing ( I used "web-friendly" fonts throughout).
    I currently have the site open in Safari, as well as iWeb open, to compare. Things look fine in iWeb, but how can I make sure they upload without changing?

    There is no problem with having a shape with a text box dropped over it. This is preferable to typing your text in the shape itself as the text will then be converted to an image and increase your file size.
    When you have, say, a text box and an image overlapping they tend to push each other about.
    Try publishing your site to a folder on the desktop and double clicking the index.html file to launch your site in the browser direct from your hard disk. If its OK there then the problem is publishing.
    Make sure you use a good FTP application to upload your files.

  • How to Use another JSF page that I load by XMLHttpRequest?

    Hi everyone, I'm a newbie of JSF and curisous about how to load page content seperately by AJAX.
    I saw example of Java Blue Print. It's load some data to use in page. What I want is to load another JSF page when click a link or button, (Like include another page). And work with functions privoided by loaded JSF Page.
    My example is, In a main page. I request a JSF page and set it into a div layer.
    var requestURL = "/admin/customer/customer-list-body.faces";
    var content = postDataWithoutContent(requestURL);     divContent.innerHTML = content;     
    All JSF components are required under <f:view>, thus action of form is set as "action='"/admin/customer/customer-list-body.faces'"
    But my page is main.jsp. Each time I click command button in customer-list-body.faces, the url will change to customer-list-body.faces, I want to request and hold in main.jsp.
    What can I do then? Any advices?

    Hi,
    the list doesn't seem to be your problem. You need to track down the illegal argument exception. Once you have that sorted out, expose the method on the AM so it gets shown as a method binding. The return values then could be picked up in a managed bean to create the select Item list
    Frank

  • Linking to a page that's not on my local server- need help!

    I am trying to set up an image with a hotspot that links to my blog for wordpress. I had issues getting it to work, until I figured out that in the href= section I have to type in just /blog/ but that only works on the home page. It won't work on any other page, because its not just the homepage followed by blog, it's got another directory in there, IE www.mowd-graphics.x10hosting.com/blog as opposed to www.mowd-graphics.x10hosting.com/folder/blog. I know it's not gonna work, but I have no idea how else to get it to link to this page because it's not in my local server like every single other page is. Any help on how to accomplish this?

    As I said before, you need to include the protocol in the link:
    http://www.mowd-graphics.x10hosting.com/blog

  • Why jsp page cause exceptions in J2EE App. Server

    I installed j2ee App Server on my Windows 2000, wrote a simple .jsp, moved the code to domains\domain1\docroot, ran the .jsp from the browser and saw the following exception. I could not find the directory common/lib for my Tomcat server. Please instruct.
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    org.apache.jasper.JasperException: Unable to compile class for JSP
    No Java compiler was found to compile the generated source for the JSP.
    This can usually be solved by copying manually $JAVA_HOME/lib/tools.jar from the JDK
    to the common/lib directory of the Tomcat server, followed by a Tomcat restart.
    If using an alternate Java compiler, please check its installation and access path.
         org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:132)
         org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:356)
         org.apache.jasper.compiler.Compiler.generateClass(Compiler.java:420)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:463)
         org.apache.jasper.compiler.Compiler.compile(Compiler.java:444)
         org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:557)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:305)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:306)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:253)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
         sun.reflect.GeneratedMethodAccessor71.invoke(Unknown Source)
         sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         java.lang.reflect.Method.invoke(Method.java:324)
         org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
         java.security.AccessController.doPrivileged(Native Method)
         javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
         org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
         org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
    ****************************************************************************************************************

    This is a known issue.
    The error message about the missing Java compiler is very misleading, and
    is being caused by a bug in the way compilation error messages are
    being propagated.
    Following is a detailed explanation of the behaviour you are seeing:
    The misleading error message is printed only in the case where a javac
    compilation error line number cannot be mapped back to a line number
    in the JSP source code.
    The internal representation of a JSP element ("JSP node") in the JSP compiler
    contains the following info:
    - The begin line number of the JSP element in the JSP page
    - The begin and end line numbers ("range") of the Java code that was
    generated for the JSP element
    When attempting to map a javac error line number back to the JSP
    source line, we determine the range into which the javac error line
    number falls, and retrieve the JSP source number of the JSP element
    associated with that range.
    However, in some cases, it is impossible to trace a javac error line
    number back to the JSP element that caused the error. For example,
    consider the following scriptlet:
    <%
    String query = request.getParameter("query");
    if(query != null) {
    out.println(query);
    } else {
    out.println("(null)");
    // } // <-- !Missing brace syntax error
    %>
    Since the JSP compiler wraps the generated code into a
    try-catch-finally block, the above syntax error in the scriptlet
    causes havoc with that try-catch-finally block, and results in 3 javac
    errors:
    <file>jsp.java:<line1>: 'catch' without 'try'
    } catch (Throwable t) {
    ^
    <file>jsp.java:<line2>: 'try' without 'catch' or 'finally'
    try {
    ^
    <file>jsp.java:<line3>: '}' expected
    Notice that all of the above javac error numbers are outside the range
    of the java line numbers corresponding to the scriptlet that caused the
    error, and therefore cannot be mapped back to any line numbers in the
    JSP page source.
    AS 8.0 PE does not handle this case correctly, and prints out the
    misleading error message (though the real error message can be found
    in the server log).
    Notice that this problem is going to be fixed in AS 8.1, so that if a
    javac error line number cannot be mapped back to a JSP page line
    number, the javac error is still returned to the client.
    As far as your particular JSP page is concerned, I don't see anything
    wrong with it, and it compiles just fine for me.
    Do you still have any problems with it?
    Jan

  • Xml pages won't load using latest Firefox 7, worked fine in earlier versions

    A web app that loads and displays xml files using javascript and xsl stylesheets is breaking since upgrading to Firefox 7.
    These pages load successfully using Firefox 3 and 4, and all versions of IE.
    I can't figure out why, bit it breaks when returning to pages that have already been successfully loaded.
    Error console shows:
    "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIDOMXMLDocument.load] ... data: no"
    but this is occurring for a file that had been successfully loaded previously.
    Additional info:
    I am getting the following warning for pages that do load successfully:
    Warning: Use of Document.load() is deprecated. To upgrade your code, use the DOM XMLHttpRequest object.
    I know I will need to deal with this issue sometime in the near future, but the structure of the data means that I need to load stylesheets from a directory above the directory containing the xml data being loaded, and the security features of XMLHttpRequest won't allow this. So a move to using XMLHttpRequest means restructuring the data, which is a major overhaul.

    A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • IDM: AS ABAP - Initial Load

    Hi,
    I have installed IDM server and completed all the initial configuration steps.
    I have created repository which connects to the IDES server using the template SAP Netweaver AS ABAP (specific application server).
    Now i am running initial load for that repository but nothing is happening. I cant see any job log,system log for that initial load.
    I have created another blank test job , which i execute and running fine.I can see the log of that blank job.But nothing is there for the job Initial Load.
    schedule rule : on demand and i am executing it by clicking on RUN NOW. If i see the status of the job it shows idle.
    Can you please help me in this?
    Edited by: Abhilashak on May 5, 2011 9:13 AM

    First, make sure it is set to use the correct dispatcher.
    Second, go to the Status area for whatever folder that job is in. It should list all jobs for that folder, and any jobs that are "queued" will be bolded.
    If it is bolded (it probably will be), it means that the job is queued to run but the dispatcher isn't running it for some reason. In that case, it could be the dispatcher it is set to run on isn't configured properly... Not sure what else would cause that.
    I'm talking about this status area:
    http://min.us/mvjy3gm

  • SYSFAIL in Initial Load of BUPA_MAIN

    Hi Colleagues,
    We are performing an initial load from a IS-M solution, so we use BUPA_MAIN instead of CUSTOMER_MAIN.
    We have some BDocs that present problems in this load, but it has been preventing the queue R3AI_BUPA_MAIN from being processed. It stops with SYSFAIL with message "Error in Mapping: Detais trx. SMW01).
    We expected that initial load shouldn't stop at any BDoc with error. We expected that we could just solve those BDocs with trx SMW01.
    And there's something else. I've seen in other project that if Middleware detects an error in a BDoc block, it just split the entries with error and process the correct entries. In our case, if one entry is wrong, all entries keep in the BDoc, including those that has no error at all.
    Is there normal behaviour or is there a parameter that control its behaviour. In simple words what we need is:
    1) BDocs with error are dealt in SMW01 but don't stop the queue, preventing all other BDocs from being processed.
    2) A block of BDoc is split when some of its etries have an error, allowing the other entries to be processed.
    Best regards,
    Renato

    Here is the best answer I got:
    the u201EError in Mappingu201C issue happens at a very first moment of the data flow when the data is just coming into CRM Middleware and there is still no BDoc created. This happens often when there is a problem, i.e.  with the table definition, in transaction /nr3ac1.  When you have a single queue handling then this problem will only stop the queue related to this BP. If you have reduced queue names or mass queues it will stop the queues, indeed.
    The procedure you are describing regarding the handling of errors (processing the good ones, and keeping the bad ones) is available since CRM 4.0. I do not know a single parameter where you can switch on or off this behavior.
    Please have a look for parameter MAX_QUEUE_NUMBER_INITIAL. Hope you will find the correct note.

  • Flash plays before html page is completely loaded

    A flash intro for a website's homepage starts to play before
    the html page
    elements are completely loaded and visible. The html page is
    not
    complicated so it would seem the flash is even slowing down
    the loading of
    the html and it looks bad, but not terrible. Is there a way
    to, like,
    prioritize the loading of the page elements?

    Sorry, I didn't design the HTML page but I'm sure it was
    tested in a few
    different browsers. I'm not sure if it happened on all or
    some. The sites
    already live so the designer did not think it was a problem.
    Just thought
    there may be a stacking order or something that would load
    the background
    before the Flash starts playing. Thanks for your help.

  • Web page won't load

    after message that "all webpages must be reloaded", pages that were loaded will not show content anymore.

    Try emptying the Safari cache. Press Command + Option + E then quit and relaunch Safari to test.
    If that didn't help, open a Finder window. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.

  • A page that looked fine in the last version does not look correct at all in 3.6.3, although it looks fine in both IE6 and IE8

    This is a log-in page, which points to our email registration software's server (Tikit's Emerge Reaction Server). If you open in it in the last version of FF, it looks as expected. The page renders fine in IE6 and IE8, and all our other website pages (www.mofo.com) render fine in both ver. of FF - its just the pages that point to our emerge-reaction server site that won't render properly. Tikit says we are the only user having this problem, and they don't know what the problem is caused by. Help!?
    == URL of affected sites ==
    http://emerge-reaction.mofo.com/reaction/RSLogin.asp?eventId=TOPICS

    Looks like a problem with the [http://emerge-reaction.mofo.com/reaction/styles/RS.css CSS file]: missing quote in url and a trailing, extra, '}' in line 331
    See the Tools > Error Console.
    <code>.header }
    .header
    </code>

Maybe you are looking for