Why do permissions always need repair?

Whenever I go to disk utility and ask it to verify my computer's permissions, it always identifies a series of files where permissions need repair.  Why is this?

http://www.thexlab.com/faqs/durepairfns.html#Anchor-The-11481
Repair Disk Permissions often produces messages while it is running. These messages are generally of an informational nature and can usually be ignored. Some of these messages may be repeated every time Repair Disk Permissions is run as the receipt for the object in question is forcing the setting of specific permissions, even if no correction is required. Again, these can also be ignored. Only messages indicating the failure of the Repair Disk Permissions process, or the inability to correct permissions on a specific file or folder, should be of concern.

Similar Messages

  • Permissions always need repair

    My model identifier is iMac12,2 and my OS version is 10.6.8
    When I do a permissions repair, one minute later I can do another repair with the same permissions repaired. In other words, it doesn't seem as though the repair actually works. Is there anything I can do about this? Should I do another clean install of the OS?

    No, and it is working. Any remaining messages are due to having the current software installed; repeated runs of repair permissions won't fix anything which the first run didn't and are a waste of time.
    (62208)

  • Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair.  I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the v

    Yesterday I ran Disk Utility and came up with hundreds of permissions that needed repair.  I hit the "repair permissions" button and waited until it said they were repaired, but just for fun I hit the "verify permissions" button again, and they all came back!  I did this several more times and every time I would hit "verify permissions" I would get the same list.  What's up?  I've always suspected diagnostic programs, but this is Apple's own!

    Ignore them. They aren't errors. You will keep seeing the same ones. As long as you get the message "Permissions repair complete," you're OK.
    http://support.apple.com/kb/TS1448?viewlocale=en_US

  • Why is  my DiskUtility no longer finding any permissions which need repair?

    In the past 4-6 weeks Disk Utility, both on my iMac and my MacBook always gives me a clean bill of health when I use it to verify/repair permissions.
    In the past, I alwyas have had something which had to be repaired.
    Bothers me that Disk Utility finds nothing. I install,uninstall lots of software and would expect permissions need tweaks after installing Security patches and such
    IS it possible that a recent OS patch (security or other) has affected Disk Utility?
    It just does not seem right that suddenly no permission needs repair.
    Any one else finding that they , too, now always have clean bill of health with permissions, using Disk Utility?

    I think some of the gurus to whom you refer need an education.
    We all recommend repairing the hard drive and permissions before installing new software not because it's a requirement but because it's a precaution against poorly maintained systems. Doing so will help prevent problems for users who simply don't know what they are doing or never maintain their computer properly. Even toasters need to be cleaned once in a while, if you get my meaning.
    Recently Mac World ran a couple of pieces on the subject that you should find interesting reading:
    Repairing permissions- What you need to know
    Take Control of Permissions in OS X
    Also, Permission Repair- The Full Story and Repair Permissions- A false panacea.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • I constantly need to repair permissions, hundreds need repairing weekly

    Hi, this is not a new problem with my MacBook Pro, and I have recently encounter the same problem whilst trying to fix a friends MacBook Pro after she approached me with the same issue. I have had a mac in new form or another since 1994 so without being a certified Mac technician, I know my way around pretty well. I use my mac all day every day and am always on grand to help my friends with theirs so I'm totally baffled by this issue.
    Each week I have to repair my permissions, in fact if I use it more that usual then it will be a disk utility fix in 2 or 3 days, the permissions that need to be fixd vary depending on what programmes I have been using, itunes comes up more than most.  After a few months of this I decided that the hard drive must bat fault so, having the old one still in warranty, brought a new one, backed it up and returned the old one to the store hoping to get a refund, they tested it and found no fault with the drive... So I reformatted it and cleaned it and have had no problems with it since it's in a hard case and used as an external.  Again after a few weeks I have the same permissions problem back again on the new drive... So I diced to update the operating system, now running 10.8.5, it's made no difference. I still have fix my permissions every couple of days as it get he dreaded rainbow wheel and my work flow becomes impossible. So my fiend came to me with her MacBook Pro, I much newer model than men and told me of the dreaded spinning wheel . I fixed her permissions and then again in  a few days time the spinning wheel was back. I changed her hard drive too and the problem persisted the same as my own.
    Please can someone help me figure this out ... Why am I getting these constant permission issues
    I have downloaded disk warrior and put both macs through the software,
    Is anyone else having these problems...
    Sorry for the long winded explanation. Thanks for taking the time to read it.

    Hi. Yes I know of the ones I can safely ignore, but I'm talking about hundreds of permissions that need to be repaired every few days and the reason why I run disk utility is because my programmes won't run properly and every action is greeted by a minutes worth of rainbow wheel. That is when I rerun disk utility to find yet again a hundred or more permissions that have to be repaired and continue to have to be repaired.
    Desperate for some help with this.
    Thanks

  • Disk Permissions constantly need Repair

    Hi,
    I've just upgraded to 10.6.5 and noticed that each time I log in, my disk permissions need repair. I've updated everything, but still seem to have permissions problems. Any help would be appreciated. These are the errors.
    Many thanks!
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/jconsole.ja r".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Classes/management- agent.jar".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/dt.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/jce.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/management -agent.jar".
    Permissions differ on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/lib/security/b lacklist".
    User differs on "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries", should be 0, user is 95.
    Repaired "System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Libraries".
    Permissions differ on "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
    Repaired "System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPluginCocoa.b undle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0/libprofilerinterface.sl".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk15/hpux-pa_risc2.0w/libprofilerinterface.sl".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0/libprofilerinterface.sl".
    Permissions differ on "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl", should be -rw-r--r-- , they are -rwxr-xr-x .
    Repaired "System/Library/Java/Support/VisualVM.bundle/Contents/Home/profiler3/lib/deploy ed/jdk16/hpux-pa_risc2.0w/libprofilerinterface.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/jconsole.jar ".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Classes/management-a gent.jar".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/dt.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/jce.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar", should be lrwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/management- agent.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/lib/security/bl acklist".
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries", should be 95, user is 0.
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Libraries".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle", should be drwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0/libprofilerinterfac e.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk15/hpux-pa_risc2.0w/libprofilerinterfa ce.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0/libprofilerinterfac e.sl".
    Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl", should be -rwxr-xr-x , they are -rw-r--r-- .
    Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/VisualVM.bundl e/Contents/Home/profiler3/lib/deployed/jdk16/hpux-pa_risc2.0w/libprofilerinterfa ce.sl".

    Yeah, that advice is all over the place. It certainly won't hurt. But the benefits of doing it are, IMO, greatly exaggerated.
    Repairing permissions can be a useful task if you are having a problem that can be traced to incorrect permissions on an application, folder, or file that is installed with the Mac OS X installer. Because those are the only things (and only a subset of those at that) that repairing permissions fixes.
    But somewhere along the line, people starting using Repair Permissions as some sort of magic pill that can fix any ailment. Computer slow? Repair permissions. Screen flickering? Repair permissions. E-mail message won't go on the trash? Repair permissions. That advice is handed out (ill-advisedly IMO) on a daily basis on these forums. And, of course, there are those who advocate repairing permissions both before and after any system update. IMO that advice too is based on urban legend. I never do it.
    If you do repair permissions, and it finishes with "Permissions repair complete", then it's done and you don't need to worry. The "errors" it returns are not errors at all and nothing needs to be fixed. They're just "messages", not errors. If you don't want to see them, simply uncheck the "show details" box.
    If Repair Permissions finishes with "permissions repair failed", or "the "underlying task reported failure on exit", then worry.

  • Repair permissions still needs repair

    I have repaired permissions three times with a restart between each repair. Am I to asume they have been repaired or is there still 45 or so things still wrong?

    If your permissions have been repaired, it will say at the bottom,"permissions have been repaired".  There will almost be some permissions that will ned repair, that does not mean there is a problem.  Using the same procedure>Go utilities>disk utilities>select your user disk (usually Mac HD), highlight that, then click verify disk, if there are errors there they will be displayed at the end. If repair disk is not grayed out click that, if it is you will need to use the install disk, and select repair disk.    ATB

  • Why do I always need to enlarge my web pages "Home Page" included to be able to read them??

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [[/questions/861312]]</blockquote>
    I have Windows 7 "Home Premium". I.E.9 came as the browser. I had to hit Ctrl+ 3 times to read this page. This happens with all my web pages. What settings do I need to change In which programs? I am using "my.yahoo.com" as my home page but it happens on all pages. Please Advise, Many Thanks, greg.

    I still don't understand why the Airport express isn't a option in system preferences/sound.  Maybe iTunes is the only one to be able to "package" the music properly to send over AE
    To best help you understand, it may be helpful to step back a moment to see how audio is streamed to an AirPort Express.
    The following is the basic path the stream takes:
    iTunes first uses the QuickTime CODEC to convert an audio file from the iTunes Library to the Apple Lossless format. As you can imagine QuickTime is an integral part of iTunes.
    iTunes then "locates" an AirPlay "speaker" (AirPort Express, Apple TV, etc.); negotiates a connection to that speaker, and then, sends the Apple Lossless file (as a digital stream) to the speaker using the AirPlay transport protocol (previously this was called AirTunes). Note: This stream can travel over either a wired or wireless connection.
    The AirPlay speaker then decodes the stream, and then, either sends it directly to the optical digital port "untouched," or converts it to an analog stream via a built-in DAC out the analog portion of the same audio port.

  • HT4628 Persistent problems installing Time capsule.  Is it a dumb product or what? Internal disk always needs repairs. its been changed I've talked to apple support and genius. No resolution in sight. HELP!!

    Real issue its been changed its been geniused  its dumb and I'm getting very upet at it.
    Questions  can I set up this thing as a wireless device and have it nnect to the internet wirelessly as well as have my computer connect to it wirelessly?
    Why  does it appear to retain all previous profiles  everytime  I try to restore the factory settings?
    Why  does  it  not work?  Is there a real Mac genius  out there  who  would kindly walk me  through this in a non-technical way?
    Thanks  for  assisting!!

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Why do I always need to sign in twice?

    When I begin the sign in the URL begisn with daw
         and my login name is entered [email protected] - and my password appears (as black circles);
    when I press enter, the URL begins with appleid
         I am then shown a 2nd window that sez I must confirm my login (text appears in red) and the login name is the same as before but without the @mac.com;
    all I do is press return and I'm now into the discussions forums.
    So why do I have to do this double sign-in every single time?
    Annoyance, only, I can always login, but I'm terrified if I ever do anything to screw it up, I'll be hard pressed to make it right agagin.
    Thanks for any explanation.

    Hello All,
    Maybe you have had this issue with other OS X upgrades, but I'm being prompted to log in twice to my MacBook Pro OS X Yosemite (2014 model).
    I've upgraded to Yosemite, from Mavericks, without any issues, until I noticed that after turning my computer on and logging in the first time, I see a progress bar load.....then the screen goes black, I hear the restart sound, then the same login screen appears for a second time.
    I then enter my credentials a second time, see the progress bar load (a little faster this time), them my desktop appears like normal.
    I've read some other, older, posts for older OS X builds but none of them addressed the issue completely.
    I've turned OFF filevault, to decrypt my HD, restarted and things seemed okay (1 log in request only). So I turned filevault back on, and the first time I logged in, it worked fine (1 log in request only). However, now, after powering off the computer, I'm back to where I started....2 log in requests before my desktop loads properly.
    I don't have the time out setting on "to request password after 60min". I don't have auto login enabled nor parental controls
    Filevault is on and my drive is encrypted. No special software loads, just the factory basics...
    Any insights or suggestions?

  • Permissions problems - need repair after crash

    Using Logic 8 with a lot of different plug ins. If Logic, or any of the standalones, freeze up for whatever reason, I run disk utility and there appears to be ongoing related issues. Is anyone familiar with the below and what could be causing this? Ive cut and pasted the Disk Utility report. It is then able to fix the permissions, but its a real time waster to have to do it each time. Thx
    Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/CoreServices/AirPort Base Station Agent.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/Utilities/AirPort Utility.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/AVC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/IIDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGAudioDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/MPEGLayer2AudioEncoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/Tundra.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaIOServicesPrivate.framework/Versions /A/Resources/VDC.plugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AnnotationInspector.propPane/Contents/CodeResources ", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/AudioSettingsInspector.propPane/Contents/CodeResour ces", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/DataRefInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/HintTrackInspector.propPane/Contents/CodeResources" , should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/NetworkInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/SettingsInspector.propPane/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Applications/QuickTime Player.app/Contents/PlugIns/VisualTrackInspector.propPane/Contents/CodeResource s", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeComponents.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTimeJava/QuickTimeJava.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTime3GPP.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeFireWireDV.component/Contents/CodeResources" , should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeH264.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeIIDCDigitizer.component/Contents/CodeResourc es", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeImporters.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeMPEG.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeMPEG4.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeStreaming.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/QuickTime/QuickTimeVR.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "Library/Internet Plug-Ins/QuickTime Plugin.webplugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/Frameworks/QTKit.framework/Versions/A/Resources/QTKitIBPlugin.i bplugin/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/Spotlight/QuickTime.mdimporter/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "Library/Audio/Plug-Ins/HAL/iSightAudio.plugin/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
    Permissions differ on "System/Library/Frameworks/QuickTime.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
    Permissions verification complete

    I have the same issue. Do you recall when the messages first appeared. I noticed mine when Itunesd became 8.2?

  • Repair permissions - always the same ones need repairing (Shockwave)

    Each time I do a Repair Permissions after doing an installation (in this case Security 008 update for Intel on my MBP) the same permissions always are repaired and ONLY these. Here's the report I always get:
    Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
    Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
    Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
    Does this seem logical? correct?
    I know they are repaired since when I go to do the next installation and begin by Repairing Permissions, nothing needs repairing. Yet I know that after another installation the Shockwave permission differences will rear their heads again.
    I do know tht Shockwave is an Adobe thing and I believe it is needed for Quicktime. Could there be something wrong with my Shockwave - or is this typical of Adobe products?
    Thanks,
    Mrs H

    Mrs H wrote:
    Each time I do a Repair Permissions after doing an installation (in this case Security 008 update for Intel on my MBP) the same permissions always are repaired and ONLY these. Here's the report I always get:
    Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
    Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
    Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
    Does this seem logical? correct?
    I know they are repaired since when I go to do the next installation and begin by Repairing Permissions, nothing needs repairing. Yet I know that after another installation the Shockwave permission differences will rear their heads again.
    I do know tht Shockwave is an Adobe thing and I believe it is needed for Quicktime. Could there be something wrong with my Shockwave - or is this typical of Adobe products?
    Thanks,
    Mrs H
    So, I have now updated the Security Update 008 on the G4 and guess what, the same Shockwave Repair permission issue. It DID NOT appear when I repaired permissions before and after the other updates (Java, QuickTime, Migration DVDCD..., etc) But Shockwave repairs did appear after Security 008.
    I found this link to another thread here on Security 008 and Shockwave. http://discussions.apple.com/thread.jspa?messageID=8699716&#8699716
    ...but, I don't know if this is my problem.
    In any case, I just have to update iTunes (only on G4) and Safari (on all my Macs) and then I'm good to go - or at least good to go and figure out what is wrong with Shockwave!
    Oh one more update to do - a casual remark I made in reply to another poster has led me to learn that I can update my Appleworks 6 and get it to work in X. Hurrah!
    Mrs H

  • No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions in Disk Utility......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..it continues with 10.7

    No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
    Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
    Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
    Repaired “Library/Preferences/com.apple.alf.plist”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

    As described in this article, don't worry about it:
    http://support.apple.com/kb/TS1448?viewlocale=en_US

  • Secure.log always need permissions repaired?

    If I ever have any permissions to repair on both my iMac and Macbook pro its always this:
    Repairing permissions for “Macintosh HD”
    Determining correct file permissions.
    Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
    What is the secure.log and is there an action I can prevent this from re-occuring?
    Any help would be appreciated.

    What is the secure.log and is there an action I can prevent this from re-occuring?You won't always get this error, only after the weekly maintenance run. You can find details here: Spurious Permission errors in OS X 10.4

  • Why are Java files listed as needing repair in Disk Utility?

    Why are Java files always listed as needing repair in Disk Utility?

    FrenchToast wrote:
    Baltwo, bull's eye, as always!
    X423424X's question is pertinent too: you usually need to repair permissions after some major upgrade or update, not on a regular basis. Is there a particular reason why you'd often try to repair permissions? Here's more on the subject.
    Repairing permissions after an update or upgrade is harmless, but I would question the need to do it even there. The Apple update itself should set the correct Permissions. I still do this, really as a hangover from Tiger days -- not certain it was really ever needed there either -- and because it's a habit that's hard to kick, but it's never found anything to repair...but for one buggy exception, which was the 10.5.8 Combo update. Running it once and then repairing Permissions created a real error. It was discovered the Combo needed to be run twice back to back and then Permissions repair. In fact, one would have been better off not running Permissions for that update to begin with. There it wasn't harnless.
    https://discussions.apple.com/message/9968141#9968141
    BTW, even Flash updates, which always used to set incorrect Permissions, are coming in clean these days.
    Exercises in Futility: Permissions Repair

Maybe you are looking for

  • Recovery Windows 7 64 bit on laptop hp pavilion g6.

    Hi all! My laptop: HP pavilion g6-1b79dx. OS: Windows 7 64 bit home premium. In december i updated Windows and restart system automatically. Then i wait update Windows, But through 1 hour system not work and i switched off laptop. Then i switched on

  • Cant open attachments in my mail since ios7 on iphone 4

    Hi there, since I updated my Iphone 4 to IOS 7, my mail is not working properly. The problem is that I can't open any attachments that I recieve, JPG, JPEG, PNG, PDF etc. I can see the attachment and I can tap on it so it opens, but it keeps loading,

  • Which camera to buy

    Hi, I wanna buy a new camera and i'm thinking about one of these 3: Canon PowerShot SX260 http://www.amazon.com/Canon-PowerShot-Digital-Stabilized-Wide-Angle/dp/B0075SUK14/ref=cm_cr_pr_produ... Canon PowerShot SX500 http://www.amazon.com/Canon-PowerS

  • Purchase Order Processing Error

    Hi All, We just migrated to out Q&A environment and we are testing out config. While trying to create a purchase order and saving, we get this pop up: "user xxxxx already processing purchase order message" Then we when click the check we get the foll

  • Exposing/Publishing PL/SQL Stored Procs as Web Services

    Has anyone come up with a way to publish PL/SQL stored procedures as web services? Our team already has sufficient knowledge in deploying EJBs and exposing them as services but we're curious to see if we can create services without building and deplo