Why do phones boot/register twice in CME 4.0?

Does somebody know why all the phones (tried it with 7960, 7940 and 7905) register a first time, and the go through the whole boot cycle again?

Have you made sure you have create cnf-files command configured ?

Similar Messages

My cisco conference phone cannot register with my CME router

Hi,
I am trying to configure my conference phone cp8831 on CME 3945 but the phone cannot register.
The status of the phone "phone not registered"
CME version
#sh telephony-service
CONFIG (Version=10.0)
=====================
Version 10.0
Max phoneload sccp version 17
Max dspfarm sccp version 18
Cisco Unified Communications Manager Express
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
IOS version
#sh version
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.4(2)T1, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 10:22 by prod_rel_team
Someone can help me with this issue?

Hello,
Is your conference phone getting an ip address? If yes, it is on the correct subnet?
Thanks,

CME SIP issue - Cisco 7821 phone not registering

Hi
I am having issues with getting a Cisco 7821 phone to register.
Current deployment is with Cisco 6921 phones SCCP registration
SIP integration with CUE
SIP integration with Mitel system
c2951-universalk9-mz.SPA.154-3.M1.bin (CME 10.5)
In flash:
rootfs78xx.10-1-1SR1-4.sbn
kern78xx.10-1-1SR1-4.sbn
sboot78xx.10-1-1SR1-4.sbn
sip78xx.10-1-1SR1-4.loads
The 7821 phone gets IP address but fails to register. Please could somebody let me know why phone is not registering.
Configuration below (10.245.226.132 is CME address) .
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol pass-through g711ulaw
modem passthrough nse codec g711ulaw redundancy maximum-sessions 5
h323
sip
registrar server expires max 600 min 60
options-ping 90
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
voice register global
mode cme
source-address 10.245.226.132 port 5060
max-dn 30
max-pool 10
load 7821 sip78xx.10-1-1SR1-4
authenticate register
authenticate realm all
timezone 22
date-format D/M/Y
voicemail 590
tftp-path flash:
create profile sync 0061443538560005
network-locale GB
voice register dn 1
number 1010
name user1
label user1
mwi
voice register pool 1
busy-trigger-per-button 2
id mac F09E.636E.63F2
type 7821
number 1 dn 1
presence call-list
dtmf-relay rtp-nte
username 1010 password 123
codec g711ulaw
no vad
dial-peer voice 391 voip
description *** Auto Attendant ***
destination-pattern 399
session protocol sipv2
session target ipv4:10.245.226.131
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 392 voip
description *** Administration Via Telephone ***
destination-pattern 392
session protocol sipv2
session target ipv4:10.245.226.131
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 393 voip
description *** Extension Assigner ***
service ea out-bound
destination-pattern 393
session target ipv4:10.245.226.132
dial-peer voice 590 voip
description *** Voice Mail Pilot ***
destination-pattern 590
b2bua
session protocol sipv2
session target ipv4:10.245.226.131
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 1 pots
description ** Match all incoming POTS calls **
translation-profile incoming IncomingPSTNcalls
incoming called-number .
direct-inward-dial
dial-peer voice 899 voip
description Call to Mitel
translation-profile incoming Prefix9
translation-profile outgoing rem44
destination-pattern [23]..
session protocol sipv2
session target ipv4:192.168.114.2
voice-class codec 1
dtmf-relay rtp-nte
no vad
interface GigabitEthernet0/0
description *** Connection to Mitel Phone System ***
ip address 192.168.114.5 255.255.255.248
duplex auto
speed auto
interface ISM0/0
description *** Connection to Cisco Unity Express ***
ip unnumbered GigabitEthernet0/1
service-module ip address 10.245.226.131 255.255.255.128
!Application: CUE Running on ISM
service-module ip default-gateway 10.245.226.132
interface GigabitEthernet0/1
description *** Connection to IP Phone LAN ***
ip address 10.245.226.132 255.255.255.128
duplex auto
speed auto
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip http path flash:
ip route 0.0.0.0 0.0.0.0 10.245.226.129
ip route 10.245.226.131 255.255.2
tftp-server flash:apps37sccp.1-4-4-0.bin
tftp-server flash:sip78xx.10-1-1SR1-4.loads
tftp-server flash:rootfs78xx.10-1-1SR1-4.sbn
tftp-server flash:sboot78xx.10-1-1SR1-4.sbn
sip-ua
mwi-server ipv4:10.245.226.131 expires 3600 port 5060 transport udp
registrar ipv4:10.245.226.132 expires 600
gatekeeper
shutdown
telephony-service
authentication credential cmeadmin c4p1ta2012
xml user xmladmin password xmladmin 15
extension-assigner tag-type provision-tag
max-ephones 104
max-dn 299
ip source-address 10.245.226.132 port 2000
auto assign 101 to 105
no service directed-pickup
timeouts interdigit 5
system message CFGS
url services http://10.245.226.131/voiceview/common/login.do
url authentication http://10.245.226.132/CCMCIP/authenticate.asp
cnf-file location flash:
cnf-file perphone
load 7931 SCCP31.9-2-1S
load 6921 SCCP69xx.9-2-1-0
time-zone 22
date-format dd-mm-yy
voicemail 590
max-conferences 8 gain -6
call-forward pattern .T
moh enable-g711 "music-on-hold.au"
web admin system name cmeadmin secret 5 $1$QmIK$46fDKVSudMxzI2bRp/Ef7/
time-webedit
transfer-system full-consult
transfer-pattern .T
secondary-dialtone 9
create cnf-files version-stamp Jan 01 2002 00:00:00
ephone-dn 298
number 598...
mwi on
ephone-dn 299
number 599...
mwi off

Page 7 of the following link recommends that you use option 150 with the Cisco 7800 series phones and use option 66 if you cannot use option 150
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/7821_7841_7861/10_1/english/admin_guide/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0/PA2D_BK_AB3F74DA_00_admin-7821-7841-7861-10_0_chapter_01.pdf
Dynamic Host Configuration Protocol (DHCP)
DHCP dynamically allocates and assigns an IP address to network devices.
DHCP enables you to connect an IP phone into the network and have the phone become operational without your needing to manually assign an IP address or to configure additional network parameters.
DHCP is enabled by default. If disabled, you must manually configure the IP address, subnet mask, gateway, and a TFTP server on each phone locally.
Cisco recommends that you use DHCP custom option 150. With this method, you configure the TFTP server IP address as the option value. For additional supported DHCP configurations, go to the "Dynamic Host Configuration Protocol" chapter and the "Cisco TFTP" chapter in the Cisco Unified Communications Manager System Guide.
Note
If you cannot use option 150, you may try using DHCP option 66.

Cisco sip ip phone CP-7841 couldn't registered in cisco CME SRST 2951

Hello,
My IP phone CP-7841 couldn't registered in my call manager. Can you help me please?
See the configuration below:
yourname#sh run
Building configuration...
Current configuration : 7013 bytes
! Last configuration change at 17:52:57 UTC Mon May 4 2015
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname yourname
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
aaa new-model
aaa session-id common
ip dhcp excluded-address 192.168.2.1
ip dhcp excluded-address 158.113.41.1
ip dhcp excluded-address 10.10.10.1
ip dhcp pool voice
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
option 150 ip 192.168.2.1
lease 0 2
ip dhcp pool data
network 158.113.41.0 255.255.255.128
default-router 158.113.41.1
lease 0 2
voice service voip
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
registrar server expires max 1200 min 300
voice register pool-type 1
description Cisco IP phone 7841
reference-pooltype 6941
voice register global
mode cme
source-address 192.168.2.1 port 5060
max-dn 400
max-pool 150
load 7841 sip78xx.10-1-1SR1-4.loads
load 7861 sip78xx.10-1-1SR1-4.loads
authenticate register
authenticate realm all
tftp-path flash:
file text
create profile sync 0002065003436039
voice register dn 1
number 101
name phone 1
voice register dn 2
number 102
voice register pool 1
busy-trigger-per-button 2
id mac E0D1.73E4.0C58
type 7841
number 1 dn 1
voice register pool 2
busy-trigger-per-button 2
id mac E0D1.73E4.A54C
type 7861
number 1 dn 2
license udi pid CISCO2951/K9 sn FCZ185070TS
hw-module pvdm 0/0
username unicef privilege 15 secret 5 $1$pCbf$7NtwVixNLu1vbwJJLRTN5.
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 10.10.10.1 255.255.255.248
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
interface GigabitEthernet0/1.10
description router interface for voice vlan
encapsulation dot1Q 10
ip address 192.168.2.1 255.255.255.0
interface GigabitEthernet0/1.50
description router interface for data vlan
encapsulation dot1Q 50
ip address 158.113.41.1 255.255.255.0
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
nls resp-timeout 1
cpd cr-id 1
tftp-server flash:rootfs78xx.10-1-1SR1-4.sbn
tftp-server flash:sboot78xx.10-1-1SR1-4.sbn
tftp-server flash:sip78xx.10-1-1SR1-4.loads
access-list 23 permit 10.10.10.0 0.0.0.7
control-plane
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
mgcp profile default
gatekeeper
shutdown
telephony-service
max-conferences 8 gain -6
transfer-system full-consult
banner exec ^C
% Password expiration warning.
Cisco Configuration Professional (Cisco CP) is installed on this device
and it provides the default username "cisco" for one-time use. If you have
already used the username "cisco" to login to the router and your IOS image
supports the "one-time" user option, then this username has already expired.
You will not be able to login to the router with this username after you exit
this session.
It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.
username <myuser> privilege 15 secret 0 <mypassword>
Replace <myuser> and <mypassword> with the username and password you want to
use.
^C
banner login ^C
Cisco Configuration Professional (Cisco CP) is installed on this device.
This feature requires the one-time use of the username "cisco" with the
password "cisco". These default credentials have a privilege level of 15.
YOU MUST USE CISCO CP or the CISCO IOS CLI TO CHANGE THESE PUBLICLY-KNOWN
CREDENTIALS
Here are the Cisco IOS commands.
username <myuser> privilege 15 secret 0 <mypassword>
no username cisco
Replace <myuser> and <mypassword> with the username and password you want
to use.
IF YOU DO NOT CHANGE THE PUBLICLY-KNOWN CREDENTIALS, YOU WILL NOT BE ABLE
TO LOG INTO THE DEVICE AGAIN AFTER YOU HAVE LOGGED OFF.
For more information about Cisco CP please follow the instructions in the
QUICK START GUIDE for your router or go to http://www.cisco.com/go/ciscocp
^C
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
access-class 23 in
privilege level 15
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
transport input telnet ssh
scheduler allocate 20000 1000
end

*****After looking at your config again, I see your "voice register pool-type 7841" had been added. I should have looked at the config a little closer.
Hello Akaffou Aristid,
The 7841 phone is a revision of the older 6941 phone and it needs to be referenced in the config.(Fast Track Configuration)
New SIP Phone models validated for CME using Fast-track configuration
voice register pool-type 7841
description Cisco IP Phone 7841
reference-pooltype 6941
"Once the new SIP phone model is configured using the fast-track configuration approach, the new phone model can be provisioned using the existing voice register pool configuration option as shown below."
Below is the link that references the above commands.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#pgfId-1295535
Hope this helps.
Please rate helpful posts.
Thanks.

HT4623 Why my phone number is not registered with iMessage?

Hi Mark, I have 2 iphone but about Why my phone number is not registered with iMessage? I try on/off my iphone but i didn't sucessfull

Turn imsg off/on.
If that doesn't work, I would than backup your data (considering the troubleshooting steps already listed) and "Erase all content and settings" on the device and setup as a new iphone and test imsg out in factory default. Try to activate your phone in factory default. If it shows your number / activates, there may be something in your current settings preventing imsg from operating / activating. If it does not activate, get in touch with carrier.
http://support.apple.com/kb/HT4137 <--- Follow this
Restore from backup after troubleshooting this.

Why my new ipad need boot-strap twice for normally work

why my new ipad need boot-strap twice for normally work

why my new ipad need boot-strap twice for normally work

HT204053 why can my phone boot up,its always asking me to connect to itunes

why can my phone boot up,its always asking me to connect to itunes

In that case, you're going to have to put the phone into recovery mode and restore it as a new device. The only other option is to connect it to the PC it normally syncs with and restore it, but it sounds like that's not a possibility.

Cisco ip phone 9971 registration failed with CME 8.5

Good day!
I have voice bundle 2951 with 15.1.3(T) IOS version and a few 9971 ip phones. In addition to it I've downloaded current SIP firmware for these phones (sip9971.9-2-1) and configured my CME as follows:
voice register global mode cme source-address 192.168.2.254 port 5060 max-dn 10 max-pool 5 load 9971 sip9971.9-2-1 timezone 13 create profile sync 0069043299436028!voice register dn 1 number 104 name 9971 SIP Phone label 104 mwi!voice register pool 1 id mac 688D.ABA4.A88B type 9971 number 1 104 presence call-list dtmf-relay rtp-nte codec g711ulaw no vadvoice service voip sip
registrar server expires max 3600 min 120
All SIP firmware files were uploaded to tftp server on CME and shared then:
tftp-server flash:kern9971.9-2-1.sebn tftp-server flash:rootfs9971.9-2-1.sebn tftp-server flash:sboot9971.031610R1-9-2-1.sebn tftp-server flash:sip9971.9-2-1.loads tftp-server flash:skern9971.022809R2-9-2-1.sebn tftp-server flash:dkern9971.100609R2-9-2-1.sebn tftp-server system:cme/sipphone
During the boot process all ip settings including option 150 were successfully updated by the phone:
ip dhcp pool voip_pool   network 192.168.2.0 255.255.255.0   default-router 192.168.2.254   option 150 ip 192.168.2.254
But when the phone tries to get files on the CME it fails. The ouput of debug tftp events command shows that there is no such configuration file on tftp:
Jul 28 16:36:14.446: TFTP: read request from host 192.168.2.8(49158) via GigabitEthernet0/1Jul 28 16:36:14.446: TFTP: Looking for SEP68BDABA4A88B.cnf.xmlJul 28 16:36:14.446: TFTP: Sending error 1 No such fileJul 28 16:36:15.522: TFTP: Server request for port 49158, socket_id 0xA2EFEE4 for process 324Jul 28 16:36:15.522: TFTP: read request from host 192.168.2.8(49158) via GigabitEthernet0/1Jul 28 16:36:15.522: TFTP: Looking for XMLDefault.cnf.xmlJul 28 16:36:15.522: TFTP: Opened system:/its/vrf1/XMLDefault.cnf.xml, fd 14, size 3210 for process 324Jul 28 16:36:15.522: TFTP: Sending block 1 (retry 0), socket_id 0xA2EFEE4Jul 28 16:36:15.522: TFTP: Received ACK for block 1, socket_id 0xA2EFEE4Jul 28 16:36:15.522: TFTP: Sending block 2 (retry 0), socket_id 0xA2EFEE4Jul 28 16:36:15.522: TFTP: Received ACK for block 2, socket_id 0xA2EFEE4Jul 28 16:36:15.522: TFTP: Sending block 3 (retry 0), socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Received ACK for block 3, socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Sending block 4 (retry 0), socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Received ACK for block 4, socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Sending block 5 (retry 0), socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Received ACK for block 5, socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Sending block 6 (retry 0), socket_id 0xA2EFEE4Jul 28 16:36:15.526: TFTP: Received ACK for block 6, socket_id 0xA2EFE
So, i see this file on CME router in system/cme/sipphones direcotory:
Directory of system:cme/sipphone/ 747 -rw-         825 Jul 27 2011 16:10:04 +00:00 featurePolicyDefault.xml 744 -rw-           1 Jul 27 2011 15:59:49 +00:00 OS79XX.TXT 749 -rw-        3761 Jul 27 2011 16:10:04 +00:00 SEP688DABA4A88B.cnf.xml 742 -rw-        1948 Jul 27 2011 16:10:04 +00:00 SIPDefault.cnf 745 -rw-        4376 Jul 27 2011 16:10:04 +00:00 softkeyDefault.xml 746 -rw-        4342 Jul 27 2011 16:10:04 +00:00 softkeyDefault_kpml.xml 743 -rw-          69 Jul 27 2011 16:10:04 +00:00 syncinfo.xml
So, i dont quiet understand why the registration process was failed. Could anyone tell me if there are restrictions on the SIP firmware and IOS version in this case?
Thank you.

linuxchild,
thank you. i checked this out, but i think it doesnt matter whether tftp-path statement is set or not in this case.
Configuration files for 9971 are located in system:cme/sipphone directory by default.
While I have this statement in tftp-server configuration, it should get this file from the server.
tftp-server system:cme/sipphone
i tried to configure it accordiing to this example.
Now i can see xml file in flash direcory:
30        1948 Aug 1 2011 09:48:52 +00:00 SIPDefault.cnf
31          69 Aug 1 2011 09:48:52 +00:00 syncinfo.xml
32        4342 Aug 1 2011 09:48:54 +00:00 softkeyDefault_kpml.xml
33        4376 Aug 1 2011 09:48:54 +00:00 softkeyDefault.xml
34        3787 Aug 1 2011 09:48:54 +00:00 SEP68BDABA4A88B.cnf.xml
35         825 Aug 1 2011 09:48:54 +00:00 featurePolicyDefault.xml
But i cant still get this file from tftp and have the same error:
*Aug 1 09:50:27.385: TFTP: read request from host 192.168.2.5(49157) via GigabitEthernet0/1
*Aug 1 09:50:27.385: TFTP: Looking for SEP68BDABA4A88B.cnf.xml
*Aug 1 09:50:27.385: TFTP: Sending error 1 No such file
Has anyone had such problem?

Cisco CP-78XX SIP Phone Pickup Not Work on CME

Hi,
I configured some SIP phones (CP-7821, CP-7841) with pickup function. Is it the Pickup / GPickup soft keys not function as the SIP phone? If yes, then I can use the FAC to access that? And I tried the FAC std. / custom as the pickup / gpickup .. both not work ... I don't know how to use the FAC on CME? As the FAC std., if I pickup local, that I should press (**3) > call?
Ref.:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#45535
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefacs.html#30064
This is the configuration:
CME-SIP-Phone#sh run
Building configuration...
Current configuration : 5413 bytes
! Last configuration change at 11:06:12 UTC Fri Nov 28 2014 by mtlops
version 15.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname CME-SIP-Phone
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.154-2.T1.bin
boot-end-marker
! card type command needed for slot/vwic-slot 0/0
enable secret 5 $XXXXXXXXXXXXXXXXXXXXXXXX
aaa new-model
aaa authentication login default local
aaa authorization console
aaa authorization exec default local
aaa session-id common
ip cef
no ipv6 cef
multilink bundle-name authenticated
stcapp feature access-code
voice-card 0
dspfarm
dsp services dspfarm
voice service pots
voice service voip
ip address trusted list
ipv4 10.118.0.0 255.255.255.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service h225-notify cid-update
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
no h225 timeout keepalive
call preserve
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 600 min 60
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class h323 1
h225 timeout tcp establish 3
call preserve
voice class custom-cptone ABC-Company
dualtone disconnect
frequency 425
cadence 500 500
voice register pool-type 7821
description Cisco IP Phone 7821
reference-pooltype 6921
voice register pool-type 7841
description Cisco IP Phone 7841
reference-pooltype 6941
voice register global
mode cme
source-address 10.118.0.10 port 5060
timeouts interdigit 2
max-dn 200
max-pool 100
authenticate register
authenticate realm all
timezone 42
time-format 24
date-format D/M/Y
mwi stutter
mwi reg-e164
voicemail 5000
call-feature-uri pickup http://10.118.0.10/pickup
call-feature-uri gpickup http://10.118.0.10/gpickup
tftp-path flash:
file text
create profile sync 0001170446349417
ntp-server 10.118.0.10 mode unicast
ip qos dscp af11 media
ip qos dscp cs2 signal
ip qos dscp af43 video
ip qos dscp 25 service
camera
video
voice register dn 2
number 1000
pickup-call any-group
pickup-group 1
name BB Leung
label BB Leung
voice register dn 3
number 1001
pickup-call any-group
pickup-group 1
name CC Chan
label CC Chan
voice register dn 4
number 1002
pickup-call any-group
pickup-group 1
name DD Leung
label DD Leung
voice register dn 50
mwi
voice register template 1
softkeys hold Newcall Resume
softkeys idle Newcall Redial Gpickup Pickup Cfwdall DND
softkeys seized Cfwdall Endcall Redial
softkeys connected Confrn Endcall Hold Trnsfer
voice register pool 1
busy-trigger-per-button 1
id mac A8XX.XXXX.XXXX
type 7841
number 1 dn 2
template 1
dtmf-relay sip-notify
username 1001 password 112233
codec g711ulaw
no vad
voice register pool 2
busy-trigger-per-button 1
id mac 50XX.XXXX.XXXX
type 7841
number 1 dn 3
template 1
dtmf-relay sip-notify
username 1002 password 112233
codec g711ulaw
no vad
voice register pool 3
busy-trigger-per-button 1
id mac 00XX.XXXX.XXXX
type 7821
number 1 dn 4
template 1
dtmf-relay sip-notify
username 1003 password 112233
codec g711ulaw
no vad
license udi pid CISCO2921/K9 sn FHK1407F25D
license accept end user agreement
license boot c2900 technology-package uck9
hw-module pvdm 0/0
hw-module sm 1
username mtlops privilege 15 secret 5 $1$0qqx$1WGdfRW.flJrwmY7k8eUy0
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 10.118.0.10 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface SM1/0
no ip address
shutdown
service-module fail-open
interface SM1/1
no ip address
interface Vlan1
no ip address
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.118.0.1
control-plane
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
mgcp profile default
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 7
associate application SCCP
shutdown
gatekeeper
shutdown
telephony-service
max-conferences 8 gain -6
transfer-system full-consult
fac standard
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
transport input all
scheduler allocate 20000 1000
end
CME-SIP-Phone#sh telephony-service fac
telephony-service fac standard
callfwd all **1
callfwd cancel **2
pickup local **3
pickup group **4
pickup direct **5
park **6
dnd **7
redial **8
voicemail **9
ephone-hunt join *3
ephone-hunt cancel #3
ephone-hunt hlog *4
ephone-hunt hlog-phone *5
trnsfvm *6
dpark-retrieval *0
cancel call waiting *1

VPN is not Configured prints on all phones now with the built-in VPN client if VPN isn't configured. That's normal and is just cosmetic. That should not be causing your registration issues.

Cisco ip phone 9971 registration failed with CME 8.6 on WAN

Dear Sir
Subject: Cisco ip
phone 9971 registration failed
with CME 8.6 on WAN
I have a WAN simulation with one Cisco2811 router one Cisco1841 router (connected with fast Ethernet interface) plus one layer 2 switch.
I upgraded the 2811 IOS to 15.4M and installed CME8.6, when we tried to add 9971 sip phone If the traffic goes throw LAN (Same subnet- directly from switch to 2811) everything is fine and the SIP phone (9971) added with no problem but when I change the subnet and traffic goes throw WAN
( from 1841 routed to 2811 with default route) my phone didn't register.
It will be great if anybody could help!!
If you can solve my problem, I will be happy to compensate.

Try binding SIP to an interface on which Phone can reach (Use "voice service voip" "sip" and then bind)
Udit

Why do Apple not register the serial numbers of stolen Apple Products?

My 3 month old 4gb iPod Nano was stolen today at the airport
As there is a small possibility of someone contacting Apple for support with a stolen product and according to http://www.stolenipods.com "Apple's iTunes software records the serial number of the last connected iPod",
so why do Apple not register the serial number of stolen products?
Powerbook G4 Mac OS X (10.4.6)

If Apple do not regsiter serial numbers why do
they ask for it in every form of support e.g. email,
phone calls etc. - to waste time or to enter it in
their customer records?
Read Chris' post again, please. They DO record
serial numbers when you register your iPod for
repair/service/warranty purposes.
They DO NOT release this information to anyone.
HP are not the Police either!!
HP is also not Apple. HP might have different
policies.
If you've filed your police report... then you've
done the best you can already.
We understand you are bitter... but please do not
take your anger out on Apple or anyone on these
forums. It is not Apple's responsibility to track
down lost or stolen goods.
Jeff Bryan :: Stolen iPods
I disagree. I feel that if the technology and systems are already in place and easily implemented, Apple have a responsiblility to their CUSTOMERS, many of whom are extremely loyal to the brand, to faciliate the locating of registered (and not inexpensive)products. Or, at the very least discouraging the theft of products that can be traced.

HT201359 Why am I getting billed twice for a song download

Why am I getting billed twice for a song download

If you are being charged double the listed price then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption (if you are downloading the song twice then in some countries you will be charged again as redownloading is not currently possible in all countries).
Or are adding or changing credit card details on your iTunes account ? If you are then each time that you do so a small temporary store holding charge ($1 or the approximate local equivalent) may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
Store holding charge : http://support.apple.com/kb/HT3702

TS1559 I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

I have done all of the steps that Apple have said to do, including completely restarting my phone and registering it as a new one, but still my wifi is greyed out, can anyone help me?

http://support.apple.com/kb/ht5621

Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?

Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?
I couldnt redeem w/o an apple ID so when i did it asked for a credit card. And I want to discontinue and remove my account from itunes but it wont let me, there is no account discontinue or removal of account

Because too much time has passed I can't edit this into the prior comment, but here is the info regarding reverting to iTunes 11.0.2 (assuming you do have a time machine backup) from https://discussions.apple.com/message/22057703#22057703
W. Raider wrote:
Repairing permissions doesn't fix it.
I reverted to the previous version, 11.0.2.
1. Quit the new crash-prone iTunes.
2. Delete the app.
3. Restore v. 11.0.2 with Time Machine.
4. In your iTunes folder look for a folder called "Previous iTunes Libraries", find the latest one.
5. In the iTunes folder itself you'll see "iTunes Library.itl", delete it (or compress it and save a copy for later just in case.
6. Copy the newest .itl file in Previous iTunes Libraries to the iTunes folder and rename it "iTunes Library.itl".
7. Launch the older version of iTunes.
My crashing has seemed to have ceased with a revert to an older version. I noticed today that the newer crashing iTunes had been launched for hours but not playing anything, when I played internet radio it crashed within 5mins, fed up I reverted to an older version.
Btw, a simpler way to do this is to revert to older iTunes app, then hold Option when it launches and choose an older library.

CUCM 8.6 - 8961 "Phone Not Registered"

Hi,
I can't get my 8961 to register to my CUCM 8.6. My 7941 registered without a problem. I verified that I correctly entered the MAC Address. My 8961 can reach the TFTP server and get its TFTP file.
Status Messages:
00:41:37 VPN Error :VPN is not configured.
00:41:36 SEPXXXXXXXXXXXX.cnf.xml.sgn (HTTP)
00:41:33 Trust List Updated
00:41:32 Updating Trust List
I verified the traces on CUCM and the phone really gets its tftp file. Those 4 messages loop and phone displays : "Phone Not Registered". In the CUCM Admin page, the registration status says : Unknown..
Does anyone have an idea?
Thank you

The usual issue when SIP phones do not register is when there is no line configured on the device. SIP phones require a line number to be configured if they are not auto registering because the phone has to learn of it's directory number from the TFTP config file so that it knows what to put in the SIP REGISTER message. Double check that there is a line set on the device in CUCM and if there's not add one and the phone should register.

Why do phones boot/register twice in CME 4.0?

Similar Messages

Maybe you are looking for