Why do screen updates fail when MacOSX changes location?

With Firefox 4.0, when I change MacOSX system location (host name and IP), the Firefox screen no longer updates. It does appear that link selections are followed. My current work-around is to quit and restart Firefox losing all session state. Changing MacOSX location did not appear to effect Firefox 3.

The issue appears to have been resolved in the production release. Perhaps it was in some way related to the beta feedback plugin.

Similar Messages

Why are application updates failing to install from application manager

Why are application updates failing to install from application manager?

Usually some update from another app is blocking any subsequent patches. The general cure is to run the Creative Suite Cleaner Tool, let the application manager reinstall and then let it try to update each application at the same time to prevent those version conflicts...
Mylenium

When using 2 printers at 2 locations. Rather than make sure the correct printer is shown when I print is there a way to make one change when I change locations?s there a way to

I have 2 residences each with a printer. When I move from one place to another and try to print I always have to make sure the correct printer is shown in the print window. What can I do to make one change on my MacBook Pro when I change locations so I am not bothered with this nuisance problem?

There was a way from OS9 location manager to set a default printer for any given location. This is not the case in OSX.
You can however, easily change the default printer in Terminal.app with lpoptions -d PRINTERNAME. To view all the printers type lpstat -p. Keep in mind that the name in lpstat -p may be a little different than the name in Printer Setup Utility. You must use the lpstat -p, PRINTERNAME when changing it in Terminal.app. Of course, if the names are the same, you don't need to worry about it.
PowerBook G4 Mac OS X (10.4.9) MacBook Pro

Update failed when adding email

Hi please can someone help me. I have a curve 9320 and had my work emails and hot mail on my phone. My work emails stopped coming through and after attempting to fix the issue, I deleted my work emails from my phone. When I try to add the work email again it keeps saying update failed. The IT dept said I need to change the mail server settings. Does anyone know how to do this or even if this is what the issue is? Thanks

Hi and Welcome to the Community!
Is your work email account a BES/Enterprise account? Were you able to, with that, synchronize wirelessly calendar, contacts, tasks, and memos? If so, then your IT folks must resolve this BES activation issue.
If you only had email, then it likely was not BES, and instead acted just like any other "personal/internet" email account. But, I cannot quite tell what you are doing and what your IT department is recommending.
If you are using the on-device email wizard and providing only the email address and password yet it is still failing, then that could be what they are referring to. If the server does not respond with the proper server settings (e.g., port, server address, etc.), then the wizard will indeed fail.
To bypass the wizard and force the ability for you to provide those additional details, you need to provide a correct email address, but an intentionally incorrect password. When the screen repaints, the same fields will be visible, but an additional "tic box" for "I will provide these settings myself" (or something similar) will be added...tic that box and proceed, and you will be presented with a screen on which you can manually enter all of the necessary details.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why Module level trigger contains "WHEN-CHECKBOX-CHANGED" trigger in Forms 6i?

Hi,
Why Module level trigger contains triggers like "WHEN-CHECKBOX-CHANGED", "WHEN-BUTTON-PRESSED" etc.? "WHEN-CHECKBOX-CHANGED" trigger is present in CheckBox & "WHEN-BUTTON-PRESSED" trigger in Button. Then why these triggers are also presnt in Module?
Can anyone please clarify my doubt?

There's a lot of triggers that are present at different "scopes". Like they exist at the item level, the block level,
the module level...
The idea is if you have an action that should only occur at that one single item it can do in the item trigger. If
it's for all of them on the block, in the block level trigger. If for all of them ever, at the module level.
For example suppose you wanted it to do a next_item after the trigger executed you can put that logic in the module
level trigger. A key thing to notice here is the trigger hierarchy. That is essential to know about.
Right click on one of these triggers in the object navigator. The execution hierarchy is override, before and after.
since each of these levels of the same trigger has this execution hierarchy this is, well, potentially not easy to
understand what is going to happen. I would typically have a per-item trigger be before and a higher level trigger
be after.
And this execution hierarchy thing is something I'd love to see enhanced in the gui. I wish it was a lot easier to see
what the execution hierarchy is when editing a trigger text. I wish one could see and modify the execution hierarchy on the
same screen as the trigger text and what would be really great is some way to tell how the trigger hierarchy will sort out
at run time. For example if one is looking at an item level trigger it would be fabulous to know that as is, that trigger will be
overridden by a higher level trigger and so on. Or vice versa if one is looking at a block level or form level trigger that it is
overridden by a lower level trigger, or it will execute before or after some other trigger. I don't know what is defined to happen
with various levels of triggers that have the same execution hierarchy. Like suppose they are all override,before,after.. then
what happens? It'd be good to know.

Why is my update failing for AFTER EFFECTS?

I downloaded After Effects 12.2 update after being told my version of AE CC won't work on 10.9.3. I downloaded the installer, but when I clicked on the PatchInstaller, the crappy Adobe Application Manager told me that the Update Failed. Updates could not be applied. Please contact your Administrator... I AM THE ADMINISTRATOR!
I clicked on the "customer support" link. And I use quotes because it shucked me to here, where they apparently don't have anyone answering questions.
Why will the doggone patcher not work? Its a PATCHER! To fix BROKEN SOFTWARE!! THAT WE HAVE LEASED! THIS SHOULD BE A NO BRAINER ADOBE!

Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

IPad originally synced with PC, updates fail when on Mac

I originally synced and stored my iPad info on a PC, then a few months later I got a MacBook Pro. I'm running OSX 10.6.8 on Mac, iTunes 10.4. The problem is that when I attempt to update the IOS on iPad (as I did today), the update fails, then I have to go back to the PC and do a full restore then update.
My question is, can I make the PC "forget," or unregister the iPad, then have sole updates/restore/sync associated to the MacBook? I rarely use the PC, and it's just a pain in the butt to have to keep restoring from a 6 month old back up.
Thanks for any help!!

The iPad is designed to only be used with one computer, and there is no 'forget' option - you can copy all your iTunes content from the PC over to the Mac and start syncing from it, but you may lose all your content when you first connect it and have to re-sync it all back onto the iPad

"Update failed" when opening Ap2 library with Ap3

One of my two Ap 2.14 libraries opened and upgraded in Ap3 with no trouble, but the other one gets an "Update failed" error message. I launched Ap3 while holding the option key and selected the library, and Ap3 produced the error message and quit. I tried running both "standard" and "admin" user accounts. Tried running Consistency Check and Rebuild Library with Ap2. Repaired permissions. No dice. Ap3 will not open the library.
Suggestions? Anyone else having similar troubles?

Ok, so I am(was) in the same boat as everyone. "Open the A3 Trial>want to update?>Upgrade....Update Failed"
So no success to enter the program,
so what I did was kinda like Trick Aperture, I went on my A2 Library clicked on (more info, Command+I) and opened the section Name and Extension and changed to a whatever named, but before I copied the original name, just in case... then it asks you to accept, the new extension...
so yes, and that Aperture Library becomes a Folder with ALL of you projects...
Now you are Able to enter A3 because is not causing that "Whatever" conflict it is with the new version, but then, on A3 I tried to import the projects and it would not appear on A3 Browser.
But I knew the projects were there...
so I closed A3... Deleted the New A3 Library (it creates automatically)
and pasted the original name on my A2 Library... and reopened A3 and it started the whole Importing process... and is on 4-5% as of now.
So if it is a little confusing here are the process I've done:
1.Changed the name and extension of A2's Library to whatever.(save the original name on a document or else)
2.Opened A3, closed.
3.Deleted A3 Library (1.3mb)
4.Renamed A2 Library (which is a folder now) with Original Name, then it became A2 Library again. Mine look like this (Aperture Library.aplibrary)
And then reopened A3, and pressed Upgrade, it started the importing.
Hope it works for everyone.

Updates fail when McAfee VirusScan is installed ( Prevent Common Standard Protection ) Prevent programs from running from the Temp directory.

When Access Protection is enabled under the category "Common Standard Protection", Rule: Prevent common programs from running files from the Temp Directory is enabled. the updates fail.
This rule provides some protection against possible malware execution. However when this rule is enabled FireFox updates fail. We have set exclusions for "updater.exe" but the problem seems to be when FF restarts and the update fails. Is there anyway of finding out what is happening at that point?? as in what FF is doing? The old FF closes and it seems to spawn a fresh "firefox.exe". But the OLD version is still current.
I would like to know if this update process can be identified and with the possibility of excluding what is being blocked so keep the extra security that this rule gives.
When the rule is disabled, FF updates without issue.

That's a comment in the file. It has no effect at all.

Why dose Premier (CS6) Crash when I change the Audio Hardware to System Default?

I am running a brand new Imac, i7 3.4ghz, 32gb ram and updated. Full Adobe Production suite installed and updated. My Audio interface is the Akai EIE Pro with the latest 2.8.18 drivers installed.
If a launch Audition, After effects, Logic, they all see the audio interface and work seemlessly. When I launch Premier it does not see the EIE Pro interface and when I change the Default Audio interface to System Default Input/output Premier crashes immediately. I have tried an earlier version of the EIE Pro drivers with the same results. It doesn't make sense to me that it would work fine in After Effects but not Premier.
Here is the following crash report.    Anybody else have this issue or have any ideas on what to do?
Cheers!!
Steve
Process:         Adobe Premiere Pro CS6 [195]
Path:            /Applications/Adobe Premiere Pro CS6/Adobe Premiere Pro CS6.app/Contents/MacOS/Adobe Premiere Pro CS6
Identifier:      com.adobe.AdobePremierePro
Version:         6.0.2 (6.0.2)
Code Type:       X86-64 (Native)
Parent Process: launchd [170]
User ID:         501
Date/Time:       2013-07-21 09:29:29.581 -0700
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report:          104446 sec
Per-App Interval Since Last Report: 81707 sec
Anonymous UUID:                      CA3E80BE-8989-2BAE-97EB-5E95F113889C
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGABRT)
Exception Codes: EXC_I386_GPFLT
[Crash log deleted.]

Steve, the partial crash log is an unofficial unwritten rule around here. The cause of the crash is usually near the top of the log anyway. The hardware profile is at the bottom. That can be helpful some times.
But, most of the contents only make sense to software engineers.
Search for the .plist without ".plist" in the search criteria.
Or, look in /System/Library/LaunchDaemons
Best of luck,
Jim
Look, I just edited my post after you replied to it, John.

Curve 9300 "Update failed" when adding second email address

Device info
Your carrier: Partner Israel
Model info and OS version (Go to Settings, then Options, then about): 9300 6.0.0.668
Add above to you profile if you dont wat to type it in all the time.
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 68.1 MB
Did a battery pull fix your issue? NO
Apps installed and their version if possible. (Go to Settings, then Options, then applications): Zello; Google talk; Email setup; Brickbreaker; Browser
BT device model/version (you will have to look at the BT device):
When writing your question
Any other details that would help us out with your issue: Reregistering with blackberry network did not work
Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
Trying to add three email addresses. The first one always works, the second one always fails with "Update failed" message. If I delete teh first one I can add the second, but I can never add an address when one is already set up. Talking to Orange (Partner) didn't work. Security wipe didn't work.

Contact again your service provider. Ask them how many email can you add to your BackBerry.
Thanks.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

How to get why the validation has failed.when using isSchemaValid() ?

Oracle 11.2
to validate xmlType I use a procedure within isSchemaValid - function,
But when it returns 0,
where from to get why the validation is failed ?
regards

Thats the reason why you should use SchemaValidate(), because its more informative
See for an example here: Re: catching error while validating an xml file

Still getting "Software Update Failed" when attempting to download iOS 7 on iPhone 4S.

I've tried countless times now to download iOS 7 on my 4S which is currently running iOS 6.1.3. It downloads completely then in the "Preparing Update..." stage it gives me an error box saying "Software Update Failed. An error occurred downloading iOS 7.0." The same thing happens every time, I've rebooted and reset my pone several times as well as logging in an out of my Apple ID all with no success. It's not like it takes an unusual amount of time downloading or anything, and once it finishes downloading it shows less storage in the "About" section in "Settings" but goes back to where it was once it gives the error message. Just a note, I was able to download iOS 7 on my iPad 3 the day the software was released without a long waiting period or any hassle. I appreciate any input. Thank you.

Thanks for the response. I have 16.5 GB of available space at the moment. I've tried it connected to a wall charger and connected to my wifi, my schools wifi, and my gyms wifi all with no success. I have not tried it from iTunes but after posting this question a few suggestioned discussions came up, one of which recommended backing up to iCloud or iTune and then performing a complete restore. I'm in the process of doing that now, whether it works or doesn't work I will get back to either way. Thanks again.

Why doesnt a sound play when I change the path?

Hi. I am trying to play a background sound in my program and so far, after searching and reading lots of posts I finally have a "TaDa" sound playing once when the program starts. But what I want is a sound to be looped everytime I start a program. That sound will be in the same folder as the program.
This is the code that I put in public static void main() to play the sound:
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
java_testt b = new java_test();
b.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
b.startApp();
private void startApp()
{playStartupSound();}
private void endApp() {System.exit(0);}
private void playStartupSound() {
Runnable soundPlayer = new Runnable() {
public void run() {
try {
File tadaSound = new File(System.getenv("windir") + "/" + //This is the windows tada sound. All I want is
"media/tada.wav"); //to change the path to another sound
AudioInputStream audioInputStream = AudioSystem
.getAudioInputStream(new FileInputStream(tadaSound));
AudioFormat audioFormat = audioInputStream
.getFormat();
DataLine.Info dataLineInfo = new DataLine.Info(
Clip.class, audioFormat);
Clip clip = (Clip) AudioSystem
.getLine(dataLineInfo);
clip.open(audioInputStream);
clip.start();
} catch (Exception e) {
e.printStackTrace();
Thread soundPlayingThread = new Thread(soundPlayer);
soundPlayingThread.start();
Does anyone know how to choose another sound in the same folder as java_test and make it work with this code because when I change the ath it doesnt run.
Thanks.

Please put your code between the code tags. It's much better readable then.
public static void main(String[] args) {
SwingUtilities.invokeLater(new Runnable() {
public void run() {
java_testt b = new java_test();
b.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
b.startApp();
private void startApp()
{playStartupSound();}
private void endApp() {System.exit(0);}
private void playStartupSound() {
Runnable soundPlayer = new Runnable() {
public void run() {
try {
File tadaSound = new File(System.getenv("windir") "/" //This is the windows tada sound. All I want is
"media/tada.wav"); //to change the path to another sound
AudioInputStream audioInputStream = AudioSystem
.getAudioInputStream(new FileInputStream(tadaSound));
AudioFormat audioFormat = audioInputStream
.getFormat();
DataLine.Info dataLineInfo = new DataLine.Info(
Clip.class, audioFormat);
Clip clip = (Clip) AudioSystem
.getLine(dataLineInfo);
clip.open(audioInputStream);
clip.start();
} catch (Exception e) {
e.printStackTrace();
Thread soundPlayingThread = new Thread(soundPlayer);
soundPlayingThread.start();
}

IOS 7 update says update failed when finished. Help??

I am updating from the last 6ios to the latest 7 iOS through my phone not iTunes. Once it completes, I get a message saying update failed. I have enough room (or it wouldn't let me update to begin with. Any ideas??

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
You may also have to restore your phone using iTunes on your computer. Be sure you update iTunes on your computer to iTunes 11.1.

Why do screen updates fail when MacOSX changes location?

Similar Messages

Maybe you are looking for