Why do some apps not work with the new ios update

i tried deleting andstarting over again(e.g : Hay day) but still ! I'm reallllllllly getting sick and tired of this ... Not even to mention how many times the browser(Safari) has stopped working and froze since i started typing this message ....

you may need to update the particular apps that are causing you crashes. Go to the app store and tap "updates".
You can also do this via itunes, click on "apps" on the left, then updates on the top and update all. then re-sync your phone.
Hope this helps!

Similar Messages

  • My mission control key does not work with the new Mac update

    The key on the keyboard doesnt work, neither does the button on my dock.  Any help?
    P.S. is anyone else having as much trouble as I am with the new update?

    The pre-2006 Mac models this forum covers cannot run a Mac OS high enough to have Mission Control. If you can identify your Mac to us we can get you moved to a more active forum.

  • Ibook is not working with the new ios 5.01 any ideas why?

    After updating to ios 5.01, Ibook is not working.
    When selecting Ibook, the software tries to open and then closes immediately.
    Any solutions?
    Thanks

    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Quit IBooks and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Why will Macfee Virus not work with the new version? How do I swich back to the previous version that did not have this issue?

    I selected to let Firefox install the update. After the update was done. A message came up and stated the new version of Firefox does not support the add-ons for Macfee virus software. How do I switch back to the previous version, that does support Macfee virus software add-ons? In the mean time I will have to switch back to IE until this is resolved.

    Your Anti-virus application is not disabled, just one silly little McAfee extension for Firefox.
    See McAfee for an updated version of their Firefox extension.

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

    fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

    I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

  • The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

    Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

  • My iMessage no longer works with the new is07 update how do I fix this

    My iMessage and some of my applications no longer work with the new software update. How do I fix this?

    I called Apple Support after trying many fixes suggested online. They directed me to the procedure on the following page:
    http://support.apple.com/kb/TS4268?viewlocale=en_US
    I did the erase and restore option they suggested since I had tried a pile of ther things suggested on posts and blogs and they did not work. I even waited the obligatory 24 hours, thus the restore from backup option was what they suggested. I have a 64gig iPhone 4S and it took about 1.5 hours to complete the entire operation seeing that I am using about 54 gigs of that capacity.
    Warning: I lost all of my emails and all of the data files from one of my map programs so be sure you have everything that you really need from your phone store elsewhere before wiping your phone. I thought that the backup on my computer would restore everything but obviously NOT.
    Hope this helps.

  • Did you tube app go away with the new iOS 6?

    Did you tube app go away with the new iOS 6?

    Yes. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • My safari will not open with the new iphone update

    my safari will not open with the new iphone update...help

    Hi Robin,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I would first suggest you restart your iPhone to see if the issue persists.
    iOS: Connecting to Wi-Fi
    http://support.apple.com/kb/HT5569?viewlocale=en_US
    Cheers,
    - Judy

  • Why does Apogee Jam not work with the Ipod Touch 4G

    Hi,
    I have a Apogge Jam an it works fine with my Mac Book, but it does not seem to be compatible with my Ipod Touch 4g.
    Only the Gibbson L&M app recognize the Apogee Jam, but no other App (Ampkit, ....) :-((
    With the IPhone 4 it shall work, can tell me anybody why Apogee Jam is not compatible with the Ipod Touch 4g (
    although the Gibson-App works)?
    Is there perhaps still other Apps which work with the Ipod Touch and Apogge Jam?
    Thanks
    Michael

    I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5.  If this app can do it, then one would presume the other apps could be updated to do it also.
    From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
    Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM.

  • My smart cover is not working with the new iPad

    The smart cover for my iPad 2 won't work with the new iPad.  I have verified the toggle is enabled in settings.  Does anyone have a solution or is experiencing the same issue?  Thanks :)

    It's the polarity of the magnet in the older Apple Smart Covers (and many third-party cases and covers) that is causing the problem.  All you need to know about this situation is detailed at my blog post:
    http://markshangout.com/blog/2012/3/17/ipad-3-smart-cover-sleepwake-feature-not- working.html
    Mark

  • A website that i use quite frequently will not work with the newer versions of firefox. Is there a compatability mode of some way to get the newer version to work?

    All the website says is this browser is not supported. Only version 3.5 is. I can list the url because it is a work url

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • I have upgraded to the new Firefox but removed it because my DAP premium will not work with the new version. Am I doing something wrong?

    DAP Premium seems not to be compatible with the new version

    Dear Old Bob..I enjoyed that! I and thanks so much ...I would have done it if I could have done it but I was blocked by Photoshop at every stage! Thankfully my own IT Guru and friend came to the rescue remotely last night and has down-loaded it. But it took him quite a bit of time.
    As XP is  faded out, there will be an awful lot of people like me complaining.
    But truth is my problems are only at a start! About 30 prints (some not yet on my 'blog' (juliamatcham.wordpress.com) all have varying settings which I have noted. Everything depends on these settings.
    All are Apple RGB (although my computer is a PC) and they were all set for my printer Epson Photo 1800. Also they were set at varying settings...Standard or Vivid 1.5, 2.5 whatever suited the design.
    These settings appear not to exist on CS2 which is a nightmare for me as each print was carefully proofed with a great deal patience and at some expense as in the end one has to use expensive paper even for proofing.
    If you have any hints for how to translate these old settings...I would kiss your feet!
    Just looking through how things work, I can't understand why I can't change my first printing option to landscape ...everything esle so far seems comprehensible.
    I do hate change!
    Meanwhile, thanks so much to Curt, Noel, Nahraka and Old Bob for cheering me on. I am obviously going to be back asking more questions about CS2!
    Julia

  • Before I downloaded the latest version of Firefox I could us the Norton Idnetity Safe. It will not work with the new version. What do I have to do to make it work?

    I am not sure if this is a plugin or extension. All I know is that it worked with the old version of Firefox. It is very important to me to be able to use this feature. Any help would be appreciated.

    THIS ISSUE IS RESOLVED FOR ME.
    When I opened this pop-up to view the settings (File > Page Setup > "Format & Options": Scale ), the Scale value was 40%. Changing it to 100% corrected the issue I observed.
    To my knowledge, I have not been inside this pop-up window before to set the Scale option. Could this value be affected by other actions within Firefox? I noticed this while using v12 which was installed 24Apr2012.I know it worked correctly since that installation, so why did the Scale value change?
    UPDATE: I just realized that the Scale option in print preview sets the Scale value in the settings. NOTE TO ALL: This is a sticky setting, not just a setting for a specific output request.

Maybe you are looking for

  • Syntax error in ECC 6.0

    Hi all, I have moved one of my program from 4.7 to Ecc 6.0 and when I tried to run it gives me this syntax error " " in include "RFKORI90                                                                "Field "SAVE_OUTPUTDONE" is unknown. It is neithe

  • MacBooks and closed lid mode

    Has Apple changed the OS yet for the MacBook so one can keep it operating when the lid is closed? For a machine that costs three times as much as your typical MS Windows laptop, this seems to be an expensive annoyance. I've read older posts of same t

  • Folio Builder Error: Source Files Not Found

    I'm having some weird issues with DPS that are preventing me from editing folios. Whenever I try to update, import or add an article to a folio (whether it's a new or existing folio), I get one of the below error messages saying that the source files

  • How can i import iphone photo to my computer

    how can i import my iphone photo to my computer

  • I had a iphone 4s, how do i get the photos that were on my iphone cloud onto my icloud thats on my pc?

    My photos that were once on my iphone were backup to the icloud but i can not seem to get the onto the pc of ipad icloud.  Why is this?