Why do some devices show up as wireless clients and not DHCP clients

When looking at the 'Logs and Statistics' section it shows me the MAC addresses of 3 wireless devices I have on my W/LAN (Macbook and 2 wireless PVR's) in the 'wireless clients' section but no info on the 2 wireless PVR's in the DHCP clients section. Only the Macbook appears there with its ip address shown. Can anyone tell me how to find out the ip addresses of these 2 other devices. I tried connecting one of the PVR's via a cat 5 but that one still doesn't show up in the DHCP clients section.

Esterhazyinoz wrote:
Can anyone tell me how to find out the ip addresses of these 2 other devices. I tried connecting one of the PVR's via a cat 5 but that one still doesn't show up in the DHCP clients section.
Try scanning with WakeOnLan to get a list of all devices and their IP addresses. If the devices got fixed IP addresses at the factory, they won't show up under DHCP.

Similar Messages

Some tables show up in Internet Explorer and not on Modzilla

I just noticed that some of the cats on the Our Cats page of my website,
www.freedomfarm.net, show up on Internet Explorer, but not on Modzilla FireFox. They are actually listed as a table on the page with a picture and text.   I will confess that I cheated. I copied the table code from another website that I liked. But since it works on IE and some of them work on Modzilla, I don't think that is the problem...could be wrong though.   If anyone has any ideas what might be causing this, I sure would appreciate the help. Thanks!

Raine770 wrote:
I just noticed that some of the cats on the Our Cats page of my website,
www.freedomfarm.net, show up on Internet Explorer, but not on Modzilla FireFox. They are actually listed as a table on the page with a picture and text.   I will confess that I cheated. I copied the table code from another website that I liked. But since it works on IE and some of them work on Modzilla, I don't think that is the problem...could be wrong though.   If anyone has any ideas what might be causing this, I sure would appreciate the help. Thanks!
There is obviously an inbalance with your 'comment' tags . Go into your pages code and delete everyone before and after the <hr> tags and the missing cats will appear. I don' t have time to figure out exactly which are casuing the issue, anyway other than mark the end and beginning of a section which the <hr> tag already does for you they are'nt required.

    <hr align="center" size="5" color="#336699"/>
    <p> </p>

How do I get my texts to only go to my iPhone - some are showing up on my MacBook and not on me phone. Some show on both. Some only on my phone.

I

Hello Tuesday117,
Thanks for using Apple Support Communities.
To help troubleshoot this issue where you are not receiving all iMessages on your iPhone please follow the steps outlined below.
If you aren't receiving iMessages across all iOS devices
Go to Settings > Messages > Send & Receive on each iOS device and make sure that you signed in with your Apple ID. You must use the same Apple ID on each device.
Go to Settings > Messages > Send & Receive > You Can Be Reached By iMessage At and make sure that you selected each phone number and email address you want to use with iMessage.
If you linked a phone number to your Apple ID with iMessage and the phone number hasn't appeared, follow these steps.
Sign out of your Apple ID in Settings > Messages > Send & Receive and Settings > FaceTime on all devices.
If you're linking a phone number to an Apple ID, sign in to iMessage on your iPhone first. Then sign in to the rest of your device one by one with iMessage and FaceTime.
iOS: Troubleshooting Messages - Apple Support
Take care,
Alex H.a

HT201974 why are some devices connection to the new extreme and others cannot?

I just bought a new extreme after reading some great reviews. But I am experiencing something that makes no sense. I have iPads, iPhones, Roku, Directv and others all usinging WiFi and all but one of the ipads (may be defected as I am bringing it in to apple today) and the directv will connect to my network.
I even tested my already connected devices by "forgetting" the network and restablishing them and they work without fail.
I bought 3 new iPad Air's and 2 connected no problem. The Roku... no problem. Playstation too.
The Direct Tv wifi was connected to the old extreme and worked but now it says, "security code not accepted" yet Iit's the correct code. Also 1 of the 3 iPad air's will not connect either. I did a reboot in recovery mode and reinstalled the IOS and still nothing. I reset the network and still nothing.
Can anyone help? Thanks!

You should manually set the the IP address and address mask in each device/system on your network.
WiFi hotspots will randomly change IP address on everything when you use DHCP inside your NAT network, which is the default.
All of your devices normally use DHCP on your AirPort network to lease an IP address which will expire, and the IP address can change each time a new lease is created. This happens automatically unless you do something to override this feature.
Network gaming systems and Internet phones often stores the addresses from inside your network at the remote end, which will be wrong after DHCP in your AirPort changes the IP address of all of your equipment at your end. You need to sign out/in from each service or re-install to establish a connection after the address changes. The DHCP lease duration default is 7 days.
You can prevent that problem by assigning fixed IP addresses to the equipment inside your network.
You use the AirPort utility to examine the DHCP address range, then select addresses just above the ones DHCP is using. DHCP in AirPort equipment usually uses 10.0.1.1 to 10.0.1.199.
The addresses you need will probably be 10.0.1.201, 10.0.1.202, 10.0.1.203, ... (use a different address for each different device). The address mask will probably be 255.255.255.0 (this is the same for everything).
Best of luck.

On the iPhone, why do some texts show up in blue and some in green?

Dumb question.. Why do some texts show up in blue and some in green on the iPhone?

Not dumb at all. The blue ones are iMessages, while the green ones are regular text messages.
Regards,
Leann

I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

I have lost my Airport Express Password.It is still connected to some devices. Can I recover it and if not how do I reset it?

If you can connect to your wireless network and you're using an Apple AirPort Base Station, then simply use AirPort Utility. From the Base Station menu, select Show Passwords...
Or, reset your wireless network password by momentarily depressing the reset button on your AirPort Extreme, Express, or Time Capsule. Press the button for one full second, no more. Then, configure a new password using AirPort Utility.
If you can't connect to your wireless network, or you are not using an Apple AirPort Base Station, you can use the procedure that follows below to retrieve it from your Mac's Keychain.
Your wireless network password is stored in your Mac's Keychain.
You must first have an Administrator account on a Mac that you use with that AirPort Base Station, one that is used to connect to your AirPort network.
On that Mac, open the Utilities folder. Find Keychain Access and launch it.
In the search field at the upper right, type Airport. All the Keychain entries for your base station will appear there, as well as other entries.
Look at the column "Kind". The entry you want to select will be labeled "AirPort network password" (not "AirPort base station password" or anything else).
If you are trying to recover the AirPort Base Station password then the entry you want to select will be labeled "AirPort base station password" not "AirPort network password".
Double-click that, and in the window that appears check the box for "Show password".
You will get the following window:
In the Password field type your Mac's Administrator password - the same one you used to log in to that Mac.
Then, click Allow, and your wireless network password will appear in the "Show password" field:
Make note of it.
Close the window, then quit Keychain Access.

I bought and downloaded a movie to my macair and it showed in my library yesterday. Today however i can not find it. Any idea why that would be? I did buy it and not rent FYI

I bought and downloaded a movie to my macair and it showed in my library yesterday. Today however i can not find it. Any idea why that would be? I did buy it and not rent FYI

OK, I think I understand what's happening.
Movies are now stored in iCloud: see http://www.apple.com/itunes/inside-itunes/2012/03/movies-now-available-on-icloud .html
So they may take a while to download to your Mac. Movies are big, after all.
I believe you can guarantee the movie stays on your Mac by going to Preferences (in the iTunes menu at the top), and going to the "Advanced" tab, and checking "Copy files to iTunes media folder when adding to library".
Hope that helps!

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

Why does the tab button in Safari close safari and not open a new tab?

Why does the tab button in Safari close Safari and not open a new tab?

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

How do I only show my inbox on email and not all the support folders

How do I only show my inbox on email and not all the support folders

There is a third-party program called Attachment Tamer that will do that for you. In the Terminal, you can type this:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
Also note that while Attachment Tamer does some things with the encoding that makes certain email clients display the item as an attachment, what shows up at the receiver's end is solely dependent on their email client and its settings.

Account Number In Bank Account Transfer CM It Show For My User Only and Not

Hi,
Cash Management / Bank Account Transfers
when make transfer From Bank Account Transfer and Enter Of All The Required Data
And Search Bank Account Number It Show For My User Only And Not Show For Some Other Users
With The Knowledge That The same responsibility For My User and All Users In Cash Resp.
How to solve this problem ??
Thanks,
Mohamed Gamal
Edited by: Mohamed Gamal on May 12, 2011 11:12 AM

I bought MLB.tv premium through Apple TV however I was not provided with a user ID and password to be able to log in on to the computer to watch as I would if I bought directly from MLB.tv. Is this a scam? Anyone else have this issue.

What would cause an IMAC to recognize one printer on a wireless network and not recognize another printer?

What would cause an IMAC to recognize one printer on a wireless network and not another printer? I have a smaller HP and a an HP 4600. The computer recognizes the smaller printer but not the bigger printer even though the printer in Settings and shows up on Settings, but I cannot print to it.

Do you have a printer driver installed for it? When you open the Print dialog have you selected it from the Printer dropdown menu at the top of the dialog?
Do you know that the printer is working and is properly installed (Added?)

8Gb Touch 2nd gen problem. Only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem

I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
Any idea what I can do to fix this?

you can connect the iPod to iTunes in recovery mode:
Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes)

My apple ID is showing someone elses email address and not mine so when i want to buy or update apps it brings this other email address up. please can someone help how do i put it back to my email address?

my apple ID is showing someone elses email address and not mine so when i want to buy or update apps it brings this other email address up. please can someone help how do i put it back to my email address?

First go here - https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and login under the manage tab. Check your information and be sure it is all correct.
An AppleID is nothing more than an email address, so if you see another email address in the store, then someone has logged in with a different AppleID than yours. Did you let someone else use your iPhone?

Why does my php export feature work in IE and not firefox?

Why does my php export feature work in IE and not Firefox? I've written a web application which contains a SigmaGrid. The grid controls reload, add update delete, print and export to csv all work in IE8. The export feature does not work in Firefox.

I'm not sure what's going on for you. I've had 4 other developers - two on Comcast and two on Fios review my work and they get the control and export action in the IE8 version but not the FF10 version.
Thanks for looking into this for me, though. I appreciate the effort. '' The operation was a success doctor, but the patient died.''

Why do some devices show up as wireless clients and not DHCP clients

Similar Messages

Maybe you are looking for