Why do some webpages not finish loading images when using cellular data instead of WiFi?

I'm using iPhone 6 64gb. The problem existed with iOS 8.0.0 and the iOS 8.0.2 update.
I have had trouble with webpages loading slowly over AT&T LTE. Sites with multiple images frequently have trouble loading all the images entirely. Instead, the unloaded portion of the image fills in with black or the image fails to load at all. If I switch to WiFi when available and refresh the page, the images will usually reload completely. I never had this problem with the iPhone 5s on the same websites.

I'm on AT&T with an iPhone 5 first gen. This problem is happening across iPhone4s al of the way to iPhone6+
Thought it was only affecting newer iPhones with new Graphic Processors but I later ruled that out.
Seems to only be happening on LTE / 4G. Is not affected on WIFI for me.
I clear cache, crash browser and even reset the phone but will still get unexpected results in LTE or 4G.
The images seem to be getting prematurely cached and are only partially rendering.
When I save the these half loaded images in photoshop I get a warning that they are damaged and/or truncated.
I have saved images out as PNG and JPGs renders poorly.
About the images-
These images are only 15k and there are 16 on the page so I can't see why they would get bottlenecked when loading.
also, there is no background-color of black anywhere in the CSS.
Note the TV-Like static on the bottom image similar to the comment ryzer08 above.
NEXT IMAGE.....

Similar Messages

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple store

I have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.

I have some web pages that loaded completely when using 3G but partially loaded using Wifi.

I have some web pages that loaded completely when using 3G but partially loaded (only text without any images ) using Wifi. Is it a site specific issue?

Can you rule out the NoScript extension as a cause of the issues on those sites? Even if you allow the main site to run scripts, often a website will spread its content over additional servers, so you may need to visit the "S" button menu a second or third time to get full functionality. (Over time, you'll recognize some the servers as being for ads, tracking, or sharing buttons and you can just let those parts of the page not work.)

Application not listed in iOS- Settings- "Use Cellular data for"

Hello,
When i install the IPA of my application, it is not listed in the "Use Cellular data for" list in Cellular data Settings. I would like to know how to add my application to this list.
Also, is it possible to get the Enabled/Disabled status of the my application if listed in the above list.

No, but you could turn off Updates under Automatic Downloads in Settings>iTunes & App Store, then update them manually when you're connected to wifi.

Why are some emails not displaying remote images

There have been a few threads on similar subjects but I haven't found a solution, or even a reason for the problem I'm seeing.
I've the display remote images option to "on" and in most of my emails images are shown. But for all the messages from one domain no images are ever displayed. The URLs are valid because the images show on my iMac in Thunderbird. On my iPhone I get a placeholder (box) with either a question mark or the "alt" text for the image.
Does anyone have any ideas about what might be causing the problem?

Sent messages moved to the account's Sent mailbox indicates the message was successfully sent by the SMTP server used to send the messages with the account but is no guarantee the message will be accepted by the recipient's incoming mail server.
The recipient's incoming mail server may be incorrectly flagging messages sent by this SMTP server as junk (messages sent via webmail access for the account does not use an SMTP server) and with the large amount of spam being circulated, a return email error message from the recipient's incoming mail server is no longer always provided if the message was not accepted by the recipient's incoming mail server or when flagged as junk by the incoming mail server.
This is not a problem with the Mail application. The recipients reporting this problem need to check with the email account provider for their account.

Why do some songs not play through entirely when they have in the past?

In both iTunes and on my iPhone and iTouch, certain songs that used to play completely now stop with just less than a minute left on them. I checked "Info" on the songs and nothing is set to stop the song before it reaches the end. Any thoughts?

It is from iTunes not the web. The link is a screenshot of what happens in iTunes.

Apple tv can not connect to library when wired to modem instead of wifi

My network consists of a Fios router, which I have shut off the wireless on. That is wired into a Nighthawk wireless router. So, there is only 1 wifi network.
The Fios router is wired directly into 3 Apple TVs. I am unable to airplay onto the AppleTVs nor is AppleTV able to find my Library (it finds the name and then can not connect). I presume the issue relates to the AppleTVs being wired into the modem - and even though that is wired directly into my wireless router, when I am on a wireless device in my house, it can not reach through the wifi router and to the modem, which connects to the AppleTVs. Similarly, the AppleTVs seem unable to reach back through the Fios router, through the wired connection to the wireless router, which is connected via wifi with my computer with iTunes running on it. Other than wiring the AppleTVs directly into the wireless router (instead of the Fios modem). I would have thought that the modem and wireless router would act as a single network if wired together, but that appears not to be the case. Thank you

PROBLEM SOLVED! holy crap i feel dumb.
Connect360 was running in the background on my Mac. I've noticed when I have my Mac streaming to my Apple TV, and when Connect360 is pulling from iTunes as well-they like to fight. I disabled Connect360 and my library popped right up.
Thanks for the help.

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work?

I have downloaded a trial version of Dreamweaver CS6 to my MacBook. Why do some features not work? I have OSX 10.6.8. I am using this trial version for a class I am taking on coding webpages using Dreamweaver. there are features I am using in class that will not open up or appear as options when I use the trial version. Are certain features locked out until I buy a copy or download a purchased copy?

Trial versions have no functional limitations, though your setup/situation might not be supportive of all functionality. You'll need to identify specific issues to get help with them. You should be posting in the DW forum instead of here if your issue does not have to do with downloading/installing.

Why do some apps never finish installing on my iPad?

Why do some apps never finish installing on my iPad?

Something could be clogging the download pipe.
If the downloads are stalled or "waiting" - try these suggestions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

Page Not Finishing Loading Sometimes

I'm using Firefox 7.0.1, which I'd been using for a while without these problems occurring until the last couple of weeks. Sometimes when going to a site, usually using a link that was in Google Search results, the browser hangs up while loading and will not finish. Also, sometimes when already at some site, which itself loaded fine, when I click on a link to go to another page within that site it will hang up. In MOST cases, stopping the load by clicking on the X at the right end of the Location Bar, then clicking on the Reload symbol will bring up the page immediately. Additionally, when going to some site which requires that I sign in (using one of my bookmarks), neither my Norton Identity Safe nor Firefox's own password fill in function fills in the username and password. (I have some sites where the data has been saved in both places, mainly ones I was already using before I got Norton Internet Security a few years ago - in those cases, when things are working correctly, Firefox will fill in first, then the ID Safe will overwrite it.) When the username and password do not fill in, clicking that X at the right end of the location bar will cause the info to fill in. This seems to indicate that although the page had appeared to be completed, it had not, and neither Firefox nor the ID Safe had gotten the signal to fill in the info.
I have looked for Malware, using Iobit's Advanced System Care 4, Malwarebytes' Anti-Malware, and SuperAntiSpyware. I have reset the maximum HTTP connections to 30. I still have the problems. I do not want to disable Java, because I do not think Java is the problem. For one thing, I'm not using a proxy filter. For another, this sometimes happens when going from one page to another at a site which I have already been navigating without a problem. Finally, in many cases this happens at sites I had been using without difficulty before, and if they were using an older version of Java I would have been having difficulties all along at those sites, at least from as soon as I started using Firefox 7.0.1. Besides, come to think of it, I'm pretty sure there have been cases where some site was working just fine, then one time it hung up, then the next time, later that day or the next day, it worked fine again. So I really doubt it's a Java problem.
I've thought of trying removing Firefox and downloading and installing it again, but if I do that I'm afraid I might lose all my bookmarks. And passwords, but nowadays they're all saved in the Norton ID Safe anyway. There's a way to save all the bookmarks in a separate file, then load them into a newly installed version of Firefox, but the last time I did that was about 2 years ago when I got a new computer, and I don't remember how to do it.
Does anyone know what is going on here? Also, how do I save my bookmarks and then put them back into a newly installed Firefox? Even if removing Firefox and starting over with a newly installed one isn't the answer here, I might have to do that for some reason in the future, and this time I'm going to save the procedure in case I ever need it again.
By the way, this happens several times every day now. But "Every Time Firefox Opens" doesn't seem really accurate, as it seems to imply that something happens on opening, or maybe keeps happening all the time one uses Firefox, and this does not happen every time I go to some site or every time I go from one location to another within a site. Nor does it seem to be specific to particular websites, although I haven't kept records to be sure of that.

Try this first......
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=25376
If that doesn't work, then try this.................
http://www.youtube.com/watch?v=0mQPsyObIz8
And use the youtube ipad app..............it's free
https://itunes.apple.com/us/app/youtube/id544007664?mt=8

After installing Firefox6 many sites will not finish loading. I click on "stop loading this page" and then click on "reload this page" and the page loads. Also if I disable javascript the page will load.

After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.

I see that you ave changed some network.http prefs. 
Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page. 
network.http.max-connections 48 
network.http.max-connections-per-server 16 
network.http.max-persistent-connections-per-proxy 16 
network.http.max-persistent-connections-per-server 8 
network.http.pipelining true 
network.http.pipelining.firstrequest true 
network.http.pipelining.maxrequests 8 
network.http.proxy.pipelining true 
network.http.request.max-start-delay 0 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Music in library, why are some songs not marked with cloud?

Music in library, why are some songs not marked with cloud icon?

Welcome to the Apple Community.
Where exactly are you looking and what do they look like, there are several iCloud icons used in iTunes.
Maybe a screenshot.

Mail Not Caching Loaded Images

Running Leopard and Mail 3.1 with multiple IMAP accounts:
So I like Mail's ability to NOT load images when I first view an email... it's a great way to avoid massive amounts of junk mail. My problem exists when I've told Mail that I DO want to load the images... they aren't being cached. So if I quickly view an email... load the images... jump to another email... then try to come back to the first one... none of the images are still there. Requiring me to reload them.
Is anyone else experiencing this? Am I missing a setting somewhere? It seems to me that these images should be cached by Mail somewhere on my machine so that I don't have to load them every time I view an email.

Bump again. I can't seem to get Mail to load inline images no matter what I do. Mayday.
-K

I have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY?

i have selected not to load images automatically in OPTION of firefox, and i want to keep this option as it is. now can i display images of particular page without changing DONT LOAD IMAGE AUTOMATICALLY? for example if i trust that image on particular page doesnot contain any adult material and safe to see that page from home, can i temparory view image on page?

-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to Tools Menu -> Options -> Content -> click '''Exceptions...''' button infront of '''Load images automatically''' -> type the address of the website on which you want to load images e.g. yahoo.com and click '''Allow''' button -> click Close
-> Click OK on Options window -> Restart Firefox
Check and tell if its working.

Why do some webpages not finish loading images when using cellular data instead of WiFi?

Similar Messages

Maybe you are looking for