Why do tables not appear in portrait?

I'm currently working on a book project that involves a small table in iBooks Author. If I want to edit a table in landscape mode, no problem. However, when I turn the book into portrait mode, the table disappears. Could anybody help me on that?
Thanx a lot.
Bobi

try adding a tite or caption

Similar Messages

HT204406 I have subscribed to match on iTunes and organized my music on my Mac Book. Why does it not appear the same way on my iPad

I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?

The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about.

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
Is it because the backup on progress?

Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
Make sure you are using ipv6 in the computers..
See
http://support.apple.com/kb/TS4597
The 6.3 utility will not work without it.
Make sure all names are short, no spaces and pure alphanumeric.
Do a full reset and start over.
But there are no more controls.. you cannot set mode..
You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

Why my iphone notes appear on my iPad?

Why my iphone notes appear on my iPad?

It's becuase you are syncing both devices to the same account which has Notes enabled.

Withholding Tax all Condtion table not appearing in Rebate Credit memo

Hi
I am finding issue in rebate credit memo.
Issue: In Acces sequence I have table 397 and extended 397 with additional fields.
In normel credit memo I am able to find all these table in sales order Pricing Analysis tab.
But in rebate credit memo, I am not able to find all table. Credit memo is showing 397 table but not showing ztable.
Please check below screen shot for details
1. 397 and 988 are identical and its appearing in rebate credit memo.
I created 988 just to verify if any thing wrong in ztable generation or any thing missing to map.
987 is extended table with addtional field sales doc. Type, Item category and its not appearing in Rebate credit memo.
2. Rebate credit memo showing 988 and 397 table
3. Normel credit memo showing all three table
Question : How to get all three table in Rebate Credit memo?
If 988 is appearing than why 987 is not populating.
Both are Ztable and created together.
I tried many combination but extended ztable not coming in rebate credit memo
Regards
Neeraj

Hi JP,
Thanks
Routine 923 created as per SAP note 178824. And I am finding this issue only for rebate credit memo request.
This condtion type (withholding tax ) is not part of rebate condtion. It is part of standard pricing procedure same like MWST.
In Normel credit Memo (CR) all access assigned to this access sequnce is visible in sales order pricing analysis.
But rebate credit memo request (B3) not showing all access (as in above screen shot). It shows only 2 access out of 3 access.
One more addition
If I am maintaining condtion record for visible access in rebate Credt memo request i.e. country / Tax relevant classifcation.
SAP disble it in rebate credit memo request order.
But normel Tax (MWST) is appearing in rebate credim memo request.
I am not sure if this is due to standard sap.
For Thailand we require withholding tax for Rebate credit memo.
Please advice if any one can give some input on this.
Regads
Neeraj

Query Builder - Tables not Appearing

Hi, I am encountering a problem when trying to use Query Builder.
If I have a table that is joined to by more than one other object and wish to drag TWO instances of this table into Query Builder, it will not allow it to happen. It doesn't give any error message, just at the end of the drag operation, nothing appears.
I've now tried it with a blank canvas and just tried to drag two instances of any table there. It will just not allow the second one to appear.
I am using SQLDeveloper in the following environmeny
OS Name Windows XP (version 5.1)
java version 1.5.0_05
java.vm.version 1.5.0_05-b05
SQLDeveloper version 1.1.2.25
and am connecting to a local version of Oracle Database XE.
Am I doing something wrong or is this a known problem?
Chloe

Thanks. I've requested it as a missing feature, but it seems odd that this functionality is not already there. Using the ubiquitous EMPLOYEE table that all good examples seem to use, you would not even be able to join this table to itself to get the details of managers of employees.
That's why I wondered if it was a bug on my laptop first.
I have taken your advice and created views of the tables I need to have multiple joins to as a workround for now, but I may end up with multiple views of the same table which could get unwieldy.
Thanks again though. :-)
Chloe

Why do columns not appear in the same order as the fields on my imported form?

Hello All
I am an Acrobat X user and make numerous forms through Acrobat. However, when I import the file into FormsCentral, the order of the fields in the table do not correspond to the order in which they appear on my form. The fields on my form are in a calendar format so they appear from left-to-right. I'm wondering if when I do the import, it is read by FormsCentral from top-to-bottom instead or is it random. It's a real inconvenience and severely inhibits my workflow when I have to rearrange the columns to work with the data. Any suggestions or insight would be appreciated.
Thanks
Daryl

Files have no order. File management programs like the finder or windows explorer will display files according to your selected display sort. Typically alpha by file name, date created, size, date modified. So to view them in a selected order you need to sort on an attribute that accomplishes that. The easiest usually is to export photos using the sequential naming option then displaying in alpha order
LN

Heading in Table not appearing in Contents

I am working on a pages doc that has a table that runs 17 pages. The table is not numbers; but all text defining different characteristics from research. In a number of the cells in the table, there is text formatted as heading 2. I made sure to use that formatting in order that these items would appear in the table of contents. However, when I insert a table of contents, pages does not seem to recognize the headings within that table. Is there a fix for this or workaround?
Thanks for any help. I'd prefer not to go back to Word or Open Office for this.

Pages' TOC will only index the text in the default text layer in Word Processing documents.
This excludes all floating objects and inline objects which includes any text in tables.
Peter
Greetings from sunny Broome.

Tables not appearing in schema

Hey, im using the netbeans IDE 6.7, and have created a new Web application project, when I try to add a new "entity classes for database" connection, it doesn't display all the tables in the schema, it says a connection is established, and it reports an error when i entered in the wrong password (was just testing that it actually was connecting), I haven't added any items to the schema but I was told any new tables are automatically put into the users schema which would be "test" which is my username...
I do however get other tables in this list which Ive searched for and they appear under the owner "System", some of them are DEF$_TEMP$LOB(no primary key), HELP, OL$(no primary key), PRODUCT PRIVS(view). I have no idea where these are coming from and why they are appearing when I select the TEMP schema....
Is there a way I can create tables for a specific schema, or find out what scheme already existing tables belong to?
also im using the free oracle xe 10g Release 2 (10.2)

Hello,
find out what scheme already existing tables belong to?This query may help you:
select owner, table_name
from dba_tables
order by owner, table_name;You have to execute it logged on a Oracle User who has SELECT privilege on the View DBA_TABLES, for instance SYSTEM.
Is there a way I can create tables for a specific schemaYou can for instance connect to this User/Schema and execute this:
create table <table_name> ... ;Or you may connect to any User/Schema with the Privilege CREATE ANY TABLE (for instance SYSTEM) and execute this statement:
create table <schema>.<table_name> ... ;Where <schema> is the Schema on which you want to create the Table.
Hope this help.
Best regards,
Jean-Valentin

Why are iPad Notes appearing on my Mail Archive?

I entered a sensitive item in Notes on my iPad and nowhere else. Today that item has appeared on my iMac in a Gmail Archive folder on Mail. Why on earth should there be any connection between these two functions on different machines, and how much else goes from my iPad to Google without my knowledge ? iCloud is not (to the best of my knowledge) active.
Any explanation would be appreciated please -- this is rather worrying.

See http://kb.mozillazine.org/Preferences_not_saved

Why does firefox not appear in realtek sound mixer?

Hi,
I have recently had a virus on my laptop (windows security virus) on a relatively new dell laptop, however I believe I have managed to clear it using spybot and kaspersky. However the sound has disappeared from youtube & bbc etc, all trusted sites. The sound stopped working before I added Kaspersky. I use spotify and the sound works fine on this and so does windows media player therefore it seems only to be a problem with playing sound on the internet. Firefox doesn't appear in my realtek sound mixer and nor does internet explorer. All drivers are up to date, I have uninstalled firefox, I have disabled each plug in individually to see ifthere is a conflict and all sound levels in control panel are set normally (reset to factory default). I'm not sure what else to do; does anyone have any suggestions?
Thanks in advance,
Innes

Do you see the plugin-container process in the sound mixer if you visit a website that plays sound (e.g. YouTube or MySpace) ?
Make sure that the correct sound device is selected.
* https://support.mozilla.com/kb/Video+or+audio+does+not+play
* http://kb.mozillazine.org/Video_or_audio_does_not_play
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
You will only see the Firefox program in the Mixer if you are on a website that plays sound.<br />
Also check the volume setting for the plugin-container process.<br />

Why certain tables not supported in DBAdapter?

While creating a Database Adapter PartnerLink and selecting a list of required tables, I get the following error:
bq. *The following tables are not supported in the Database Adapter and were not imported {list of tables}*
What kind of tables are not supported? The tables that are so far not included are many-to-many link tables. Some of these tables have column values that I need. Must I use a custom SQL statement to acquire the information in them?

<b>a.</b> System acknowledgments used by the runtime environment to confirm that an asynchronous message has reached the receiver.
Application acknowledgments used to confirm that the asynchronous message has been successfully processed at the receiver.
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
<b>c.</b> No
Message was edited by:
Prabhu S

Why do tables not display within a cfform tag?

i have included the html/cfm for a page it will not dispay in
the center of the display nor will the descriptions in the table
defined within the cfform tag display. i defined the cfform format
= flash because i want to use the calendar to select the date.
what am i missing???
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Untitled Document</title>
</head>
<body>
<table width="50%" border="5" cellspacing="3"
cellpadding="3" bordercolor="#0066FF" align="center">
<tr>
<td align="center">

<cfform name="form1" id="form1" format="flash"
method="post" action="dates2.cfm">
<table width="50%" border="5" cellspacing="3"
cellpadding="3">
<tr>
<td> </td>
<td> </td>
</tr>
<tr>
<td>Enter the First Breeding Date</td>
<td ><cfinput type="datefield" name="sdt"
width="100"/> </td>
</tr>
<tr>
<td>Enter the actual date the puppies were born
</td>
<td> </td>
</tr>
<tr>
<td>Add or Subtract gestation days from start date
</td>
<td><table width="150">
<tr>
<td><cfinput type="radio" name="addsub" label="Add
Days" checked="true" value="A" /></td>
</tr>
<tr>
<td><cfinput type="radio" name="addsub" label="Sub
Days" value="S" /></td>
</tr>
</table>
</td>
</tr>
<tr>
<td>Enter the number of gestation days </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
</tr>
</table>
</cfform>
</td>
</tr>
</table>
</body>
</html>
thanks bob

when you use format=flash any html code you have inside
cfform is
totally ignored. you have to code your form fields very
differently with
format=flash...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Why are reminders not appearing as a banner?

1. I have set reminders to appear as a banner but they don't appear at all.
2. The camera doesn't appear on the lock screen.
Has anyone else encountered these glitches?

First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Why do presenter notes appear on both displays?

On previous presentations I have used presenter notes successfully, but this time they are appearing on both displays or neither. What am I doing wrong please?

Many thanks, Gary.
I do have Mac 10.6. I followed your link to Mirror Displays in Snow Leopard and then to Mac Help on "Displays".
The solution is that the "Arrangments" tab only appears when the projector or second display is actually connected to the computer. So now I have unselected Mirror setting and all works fine. (Its a mystery how it got set since last year, but that doesn't matter.)
Because of the layout here, when I am connected to (cable) internet I am out of reach of the projector, so did not discover the solution earlier. Thanks again.

Why do tables not appear in portrait?

Similar Messages

Maybe you are looking for