Why do the "Ok", "No Data" and "N/A" all show as "N/A" in the report?

Well, I guess the title of this post says it all.
I'm right now preparing the customer report, but I need to manually change all "N/A" tp their original meaning, which might be "Ok", "No Data" or "N/A".
Is this a bug, or what is the train of thought here?
/Anders

Short answer is that this is the way it was designed.
You're seeing "N/A" in the Priority column which, in the design of the health check service, only had meaning for the P1,P2 or P3 grades. That was the basic idea behind the output you're seeing. Another goal in the design of the service was to keep the report focused on the results that were important for the customer to see. And so it was decided that by default, only P1, P2, or P3 grades would be included in the report. We allow overrides, but since the overrides were the exception rather than the rule, there shouldn't be too many "no priority" entries in the report.
That being said, we're always looking for ways to improve the service, and I can see how it would make sense to display "Ok", "No Data", etc... in the priority column. I will talk to the team to see if it makes sense to change this in a future release.
In the mean time, I'm afraid you're going to have to continue to change it manually if you would like the non-priority grade names to appear in the report.
Best,
Tobin

Similar Messages

I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and i was using it just fine yesterday.

I have Creative Cloud installed and Photoshop installed, but I can not open the program itself. No idea why, everything is up to date and I was using it just fine yesterday.
2015-02-24_1129 - DavidIpromote's library

Try resetting Photoshop Preferences. Use your Photoshop start icon to launch Photoshop and immediately press and hole Shift+Ctrl|CMD+Alt|Option keys Photoshop should Prompt you with Do you want your Preferences deleted. Reply yes. Photoshop should then delete your user ID preferences and then create a default set of preferences for your ID and start successfully.

Why date and time do not show as links in some email message in 4s?

why date and time do not show as links in some email message in 4s?

To add it back, tap the Edit button at the top of the list of mailboxes and select the missing email account so that it has a tick against it (you can also change their order in the list by dragging the parallel line icon to an account's right), tapping Done should then get it to show in the list

I have iphone 4s and i did by mistake a restore with different id so i lost all my data and i got all the other id data , contacts .....etc , please how can i fix that mistake

I have iphone 4s and i did by mistake a restore with different id so i lost all my data and i got all the other id data , contacts .....etc , please how can i fix that mistake

How to Restore from a backup: http://support.apple.com/kb/ht1766

Report the date and time of all the systems reporting to sccm

Hi,
We have a requirement to report the date and time of all the systems reporting to SCCMnot sure if this is possible.
Appreciate any help regarding this.
Thanks

Not sure I understand what you are asking. Do you want to get the date/time for the last hardware inventory, heartbeat discovery etc?
Kent Agerlund | My blogs: blog.coretech.dk/kea and
SCUG.dk/ | Twitter:
@Agerlund | Linkedin: Kent Agerlund |
Mastering ConfigMgr 2012 The Fundamentals

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing.

I sent in my iPhone 6 for repair. I used restore on the loaner phone I was given, and the contacts, texts, reminders, and Safari pages all showed up. My phone is back, and when I used the restore function again, those items are missing. I do not use iCloud because I have no wifi at home, limited data available for regularly backing up, and I have a 64GB phone and don't wish to pay to upgrade from the 5GB iCloud storage. Am I doing something wrong? It worked so seamlessly on my loaner phone that I am completely stumped as to why it will not restore those items to my original phone again.

The iphone is designed to be synced to your computer or cloud service. Your contacts should be in whatever program/service you have chosen to sync.
If you have failed to do this, then they are likely gone.

Adjust Date and time for all Photos in an event?

Would some one tell me how to adjust the date and time for all photos in an event. For some reason when I change the date, it only changes the first photo in the event and I am left with a range of dates in the event, but I would rather they all have the same date in the event. Any thoughts or ideas?

How are you selecting the photos and changing them? How much of a change are you trying to make? A total change of date and time or just a delta change either plus or minus?
Using the Photos->Adjust Date and Time... menu option will apply the time/date difference to all of the photos in the Event if you click on the Event icon in the Photos mode or the Event mode.

Why not Deprecate java.util.Date and java.util.Calendar

With the introduction of java.time, why did you not flag java.util.Date and java.util.Calendar. These classes have been a bane to every Java developer and should never be used again with the introduction of Java 1.8.

Adding the @Deprecated annotation would only just provide a warning about an old API and recommendation to the developer(s) to no longer use it. Doing so would not break any existing library out there; in fact quite a number of constructors and methods on the Date class have already been flagged deprecated.
The new java.time package is far superior to Date/Calendar.

I select a page for printing and the print page shows only the frame data and this is all that it prints.

when I click on print the page to print shows only the frame and that is all that is printed. Why isn't the page data shown on the print page and also printed?

This is how you do it:
http://i1224.photobucket.com/albums/ee374/Diavonex/c7db8382.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/5e4aadae.jpg

SG-300 28P switches problem with VLAN Data and Voice, working all the time as Voice VLAN

Hi Everyone,
Thank you very much for your help in advance. I’m pulling my hair to fix the problem.
I just got the new SG-300 28P switches. My Bios ordered for me. I did not know how it runs until now... not an IOS based. I really do not know how to configure it.
I have 2 VLAN are Data and Voice.
-          Data VLAN ID is 2 IP 192.168.2.X/255.255.255.0
-          Voice VLAN ID is 200 IP 192.168.22.X/255.255.255.0
-          I created two vlans, in switch, Data and Voice.
-          On the port number 28, it is trunk by default, so I add Data vlan ID 2 tagged.
-          On the port number 26, it is trunk by default, so I add Voice vlan ID 200 tagged.
-          On the port number 27, I add Data vlan ID 2 tagged for Data vlan out.
-          Port settings No.1
I set it up as Trunk with Data vlan 2 untagged, and 200 Tagged (voice vlan). I plugged in a phone with a pc attached. But the PC will get to the vlan 200 to get the DHCP address, but no from vlan 2. The Phone works with correct vlan ip.
-          Port settings No.2
Trunk with vlan 1UP, 2T, and 200T. The phone is even worse. Would never pick up any IP from DHCP.
-          Port settings No.3
Access with 200U...of course the phone will work... and the PC could not get to its own vlan. Instead, the PC got an ip from the voice vlan. Not from VLAN 2.
I have Linksys phone I’m not sure if this help.
For more information I setup in switch,
            - enable voice vlan
- set the port on auto voice vlan
- enable LLDP-MED globally
- create a network policy to assign VLAN 200
- assign this network policy to the port the phone is connected to.
I hope this information help to help me to setup Data and Voice vlans, to plug the phone to work with vlan Voice 200 (IP rang 192.168.22.X), from phone to Pc and pc work as Data vlan 2 (IP rang 192.168.2.X).

I just got done setting up voice VLANs on an SF 300-24P and verified working. This was working with Cisco 7900 series phones connected to a Cisco UC setup.
Here's my sample config.
Note that I edited this by hand before posting, so doing a flat out tftp restore probably won't work. However, this should give you a clue. Also, don't take this as 100% accurate or correct. I've only been working with these things for about a week, though I've worked with the older Linksys SRW switches for a couple of years. I'm a CCNP/CCDP.
VLAN 199 is my management VLAN and is the native VLAN on 802.1q trunks.
VLAN 149 is the data/computer VLAN here.
VLAN 111 is the voice/phone VLAN here.
VLAN 107 does nothing.
interface range ethernet e(1-24)
port storm-control broadcast enable
exit
interface ethernet e1
port storm-control include-multicast
exit
interface ethernet e2
port storm-control include-multicast
exit
interface ethernet e3
port storm-control include-multicast
exit
interface ethernet e4
port storm-control include-multicast
exit
interface ethernet e5
port storm-control include-multicast
exit
interface ethernet e6
port storm-control include-multicast
exit
interface ethernet e7
port storm-control include-multicast
exit
interface ethernet e8
port storm-control include-multicast
exit
interface ethernet e9
port storm-control include-multicast
exit
interface ethernet e10
port storm-control include-multicast
exit
interface ethernet e11
port storm-control include-multicast
exit
interface ethernet e12
port storm-control include-multicast
exit
interface ethernet e13
port storm-control include-multicast
exit
interface ethernet e14
port storm-control include-multicast
exit
interface ethernet e15
port storm-control include-multicast
exit
interface ethernet e16
port storm-control include-multicast
exit
interface ethernet e17
port storm-control include-multicast
exit
interface ethernet e18
port storm-control include-multicast
exit
interface ethernet e19
port storm-control include-multicast
exit
interface ethernet e20
port storm-control include-multicast
exit
interface ethernet e21
port storm-control include-multicast
exit
interface ethernet e22
port storm-control include-multicast
exit
interface ethernet e23
port storm-control include-multicast
exit
interface ethernet e24
port storm-control include-multicast
exit
interface range ethernet g(1-4)
description "Uplink trunk"
exit
interface range ethernet g(1-4)
switchport default-vlan tagged
exit
interface range ethernet e(21-24)
switchport mode access
exit
vlan database
vlan 107,111,149,199
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 107
exit
interface range ethernet e(21-24)
switchport access vlan 111
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 111
exit
interface range ethernet e(1-20)
switchport trunk native vlan 149
exit
interface range ethernet g(1-4)
switchport trunk allowed vlan add 149
exit
interface range ethernet g(1-4)
switchport trunk native vlan 199
exit
voice vlan aging-timeout 5
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
voice vlan oui-table add 108ccf MyCiscoIPPhones1
voice vlan oui-table add 40f4ec MyCiscoIPPhones2
voice vlan oui-table add 8cb64f MyCiscoIPPhones3
voice vlan id 111
voice vlan cos 6 remark
interface ethernet e1
voice vlan enable
exit
interface ethernet e1
voice vlan cos mode all
exit
interface ethernet e2
voice vlan enable
exit
interface ethernet e2
voice vlan cos mode all
exit
interface ethernet e3
voice vlan enable
exit
interface ethernet e3
voice vlan cos mode all
exit
interface ethernet e4
voice vlan enable
exit
interface ethernet e4
voice vlan cos mode all
exit
interface ethernet e5
voice vlan enable
exit
interface ethernet e5
voice vlan cos mode all
exit
interface ethernet e6
voice vlan enable
exit
interface ethernet e6
voice vlan cos mode all
exit
interface ethernet e7
voice vlan enable
exit
interface ethernet e7
voice vlan cos mode all
exit
interface ethernet e8
voice vlan enable
exit
interface ethernet e8
voice vlan cos mode all
exit
interface ethernet e9
voice vlan enable
exit
interface ethernet e9
voice vlan cos mode all
exit
interface ethernet e10
voice vlan enable
exit
interface ethernet e10
voice vlan cos mode all
exit
interface ethernet e11
voice vlan enable
exit
interface ethernet e11
voice vlan cos mode all
exit
interface ethernet e12
voice vlan enable
exit
interface ethernet e12
voice vlan cos mode all
exit
interface ethernet e13
voice vlan enable
exit
interface ethernet e13
voice vlan cos mode all
exit
interface ethernet e14
voice vlan enable
exit
interface ethernet e14
voice vlan cos mode all
exit
interface ethernet e15
voice vlan enable
exit
interface ethernet e15
voice vlan cos mode all
exit
interface ethernet e16
voice vlan enable
exit
interface ethernet e16
voice vlan cos mode all
exit
interface ethernet e17
voice vlan enable
exit
interface ethernet e17
voice vlan cos mode all
exit
interface ethernet e18
voice vlan enable
exit
interface ethernet e18
voice vlan cos mode all
exit
interface ethernet e19
voice vlan enable
exit
interface ethernet e19
voice vlan cos mode all
exit
interface ethernet e20
voice vlan enable
exit
interface ethernet e20
voice vlan cos mode all
exit
interface ethernet e1
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e2
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e3
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e4
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e5
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e6
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e7
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e8
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e9
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e10
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e11
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e12
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e13
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e14
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e15
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e16
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e17
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e18
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e19
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e20
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e21
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e22
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e23
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e24
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g1
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g2
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g3
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet g4
lldp optional-tlv port-desc sys-name sys-desc sys-cap 802.3-mac-phy 802.3-lag 802.3-max-frame-size
exit
interface ethernet e1
lldp med notifications topology-change enable
exit
interface ethernet e2
lldp med notifications topology-change enable
exit
interface ethernet e3
lldp med notifications topology-change enable
exit
interface ethernet e4
lldp med notifications topology-change enable
exit
interface ethernet e5
lldp med notifications topology-change enable
exit
interface ethernet e6
lldp med notifications topology-change enable
exit
interface ethernet e7
lldp med notifications topology-change enable
exit
interface ethernet e8
lldp med notifications topology-change enable
exit
interface ethernet e9
lldp med notifications topology-change enable
exit
interface ethernet e10
lldp med notifications topology-change enable
exit
interface ethernet e11
lldp med notifications topology-change enable
exit
interface ethernet e12
lldp med notifications topology-change enable
exit
interface ethernet e13
lldp med notifications topology-change enable
exit
interface ethernet e14
lldp med notifications topology-change enable
exit
interface ethernet e15
lldp med notifications topology-change enable
exit
interface ethernet e16
lldp med notifications topology-change enable
exit
interface ethernet e17
lldp med notifications topology-change enable
exit
interface ethernet e18
lldp med notifications topology-change enable
exit
interface ethernet e19
lldp med notifications topology-change enable
exit
interface ethernet e20
lldp med notifications topology-change enable
exit
interface ethernet e21
lldp med notifications topology-change enable
exit
interface ethernet e22
lldp med notifications topology-change enable
exit
interface ethernet e1
lldp med enable network-policy poe-pse
exit
interface ethernet e2
lldp med enable network-policy poe-pse
exit
interface ethernet e3
lldp med enable network-policy poe-pse
exit
interface ethernet e4
lldp med enable network-policy poe-pse
exit
interface ethernet e5
lldp med enable network-policy poe-pse
exit
interface ethernet e6
lldp med enable network-policy poe-pse
exit
interface ethernet e7
lldp med enable network-policy poe-pse
exit
interface ethernet e8
lldp med enable network-policy poe-pse
exit
interface ethernet e9
lldp med enable network-policy poe-pse
exit
interface ethernet e10
lldp med enable network-policy poe-pse
exit
interface ethernet e11
lldp med enable network-policy poe-pse
exit
interface ethernet e12
lldp med enable network-policy poe-pse
exit
interface ethernet e13
lldp med enable network-policy poe-pse
exit
interface ethernet e14
lldp med enable network-policy poe-pse
exit
interface ethernet e15
lldp med enable network-policy poe-pse
exit
interface ethernet e16
lldp med enable network-policy poe-pse
exit
interface ethernet e17
lldp med enable network-policy poe-pse
exit
interface ethernet e18
lldp med enable network-policy poe-pse
exit
interface ethernet e19
lldp med enable network-policy poe-pse
exit
interface ethernet e20
lldp med enable network-policy poe-pse
exit
interface ethernet e21
lldp med enable network-policy poe-pse
exit
interface ethernet e22
lldp med enable network-policy poe-pse
exit
lldp med network-policy 1 voice vlan 111 vlan-type tagged
interface range ethernet e(1-22)
lldp med network-policy add 1
exit
interface vlan 199
ip address 199.16.30.77 255.255.255.0
exit
ip default-gateway 199.16.30.3
interface vlan 1
no ip address dhcp
exit
no bonjour enable
bonjour service enable csco-sb
bonjour service enable http
bonjour service enable https
bonjour service enable ssh
bonjour service enable telnet
hostname psw1
line console
exec-timeout 30
exit
line ssh
exec-timeout 30
exit
line telnet
exec-timeout 30
exit
management access-list Management1
permit ip-source 10.22.5.5 mask 255.255.255.0
exit
logging 199.16.31.33 severity debugging description mysysloghost
aaa authentication enable Console local
aaa authentication enable SSH tacacs local
aaa authentication enable Telnet local
ip http authentication tacacs local
ip https authentication tacacs local
aaa authentication login Console local
aaa authentication login SSH tacacs local
aaa authentication login Telnet local
line telnet
login authentication Telnet
enable authentication Telnet
password admin
exit
line ssh
login authentication SSH
enable authentication SSH
password admin
exit
line console
login authentication Console
enable authentication Console
password admin
exit
username admin password admin level 15
power inline usage-threshold 90
power inline traps enable
ip ssh server
snmp-server location in-the-closet
snmp-server contact [email protected]
ip http exec-timeout 30
ip https server
ip https exec-timeout 30
tacacs-server host 1.2.3.4 key spaceballz timeout 3 priority 10
clock timezone -7
clock source sntp
sntp unicast client enable
sntp unicast client poll
sntp server 199.16.30.1
sntp server 199.16.30.2
ip domain-name mydomain.com
ip name-server 199.16.5.12 199.16.5.13
ip telnet server

Why does calendar keep changing dates and times on icloud

My calendar keeps randomly changing dates and times when using icloud and it is doing my head in.
Is there a simple way of rectifying this or do I have to get rid of icloud altogether (to save my sanity?)

If this is an iCloud calendar, you might want to check your time zone and time zone support settings. Go to icloud.com, sign into your iCloud account, click your name at the top and choose Account Settings, click Time Zone and be sure it shows the correct time zone and that you have selected a city near you. Then open your calendar on icloud.com, click the gear-shaped icon on the bottom left and choose Preferences, click the Advanced tab and make sure you have not checked time zone support at the top.
On your iOS devices, go to Settings>Mail,Contacts,Calendars>Time Zone Support (in the Calendars section) and make sure this is set to Off.

Why my ipod changes randomly date and time?

my ipod randomly changes time and date , i correct it and it changes in a few minutes into a random time

- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Printing date and time in all pages

hi frds
i wants to display or print system date and time in every pages can anyone give me coding .
by
Pari Vendhan.R

Hi Pari,
Please write the system date and time in TOP-OF-PAGE event so that it will be printed in each page of output.
Example:
report zdatetime
line-count 60.
START-OF-SELECTION.
*-- write your code here
TOP-OF-PAGE:
write: 'Date: ', sy-datum.
write: / ' Time: ', sy-uzeit.
In top of page write other details along with date and time. Here in the above declaration after each 60 lines a new page will be triggered and TOP-OF-PAGE will be called for each page before first write statement.
Regards,
Yellappa.

Date and Time Stamp not showing up on import?

I recorded with date and time stamp on my Sony Sr-11 and when I import it in iMovie 11 it's not displayed. Please help so when I import it shows up in iMovie 11.

Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
-DH

Date and Days for all year come in column

Dear all
I have 2 Column 1 is Date and 2nd is Day
And i have one Button i need when i enter button then its show all year date in date column and day in day column for example
Date---------Day+
*1-jan-2009-Thursday*
*2-jan-2009-Friday*
*3-jan-2009-Saturday*
And As on
I hope you guys understand
Regards
Shahzaib ismail

Hai,
That means, You need to fill the multi record block which has 2 columns ( 1 is date, and the other is day.).
For that Try this in the WHEN-BUTTON-PRESSED Trigger of the Button.
DECLARE
     Dt_Date DATE;
BEGIN
     GO_BLOCK ('<block_name>');
     CLEAR_BLOCK(NO_VALIDATE);
     FIRST_RECORD;
     Dt_Date := TO_DATE('01-JAN-2009');
     LOOP
          :<block_name>.TI_DATE := TO_CHAR(Dt_Date, 'DD-MON-YYYY');
          :<block_name>.TI_DAY := TO_CHAR(Dt_Date, 'DAY');
          EXIT WHEN TO_CHAR(Dt_Date, 'YYYY') <> TO_CHAR(Dt_Date + 1, 'YYYY');   -- If next year reaches, exit from the loop.
          Dt_Date := Dt_Date + 1;
          NEXT_RECORD;
     END LOOP;
END;          Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

Why do the "Ok", "No Data" and "N/A" all show as "N/A" in the report?

Similar Messages

Maybe you are looking for