Why do the strokes around my frames load slowly online?

I have a website: www.libusedesign.com that I built in iWeb. A few questions:
1. Why do the strokes around my little boxes take forever to draw online? (see website to see what I mean). The photos in the boxes are that size, lo-res JPGs (they are not too big). So, why is this? Is there a way to fix it?
also...
2. If I put a "shadow" on something in iWeb, it does not show when online. (and I am using the latest browers...firefox, safari)
3. In this particular website, in my navigation bar, I have to make the text off center vertically to make it appear online correctly. If I have it set right where I want the text to be in iWeb, it appears off when online, therefore, I have to make it look bad in the iWeb program, just to make it look correctly online. Why is this?
Thanks

Try both and then download and run GraphicConverter in the demo mode to see what reduced file size it can create with both formats that will look good.
Another method is to use the jpg format and use the freeware Resize! to resize it with the following settings:
*JPEG Quality* = experiment with several to see which will give the smallest file size and acceptable quality
*Proportional Resizing* = 100 Percent - this will keep the image size the same.
I've seen some background images resized with the quality set at 20 (low) that looked as good as the original. However these were patterned images and might be too low for your use. That's why you can experiment with the quality level and see what size is acceptable.
OT

Similar Messages

  • TS1702 ?Some of my applications have been saying I need the latest version of Adoebe Flash Player.  When I try to download it I get the following error message:  'Frame Load interrupted' and the installation stops.  Any suggestions

    Some of my applications have been saying I need the latest version of Adoebe Flash Player.  When I try to download it I get the following error message:  'Frame Load interrupted' and the installation stops.  Any suggestions?

    You can only use apps downloaded from the App store, not via a browser. There is no Flash for any iOS device including the iPod.

  • Why is the position of key frame BEFORE scene changes not after?

    Why is the position of I frame BEFORE scene changes not after?
    And, why doesn't MovieVideoChart show any I frames other than those that correspond to periodic "key frames every X frames"? Is it reading meta data and not really showing where the real existing I frames are located? I.e. WYSIAL (what you see is a lie)? If so, where can I get an affordable tool that will let me examine my files in this regard?
    I have put compression and chapter marks at scene changes in FCP and have exported with markers for DVDSP (both chapter and compression).
    I have read on this forum (somewhere) that when insert key frames every X frames is selected, Compressor is still going to insert key frames automatically at key frames.
    When I last encoded with H.264 in Compressor, I selected option to insert I key frame every 90 frames (fps=29.97).
    When I jump to chapter in my encoded video, where I had place a key frame at a cut, I end up with a chapter at the frame BEFORE the cut.
    I will try moving my chapter/compression marks a frame ahead and see if that helps.
    Certainly, others must have been plagued by this problem.
    When encoding with MPEG2 for DVD, the same thing happens.
    It is a real problem. I get one frame appearing before the cut in chapter skips.
    Hope someone can illuminate this problem.

    Hi there
    As you have seen, RoboHelp doesn't understand how to create the layers you are wanting to achieve the effect in Word. It simply brings the images in as separate objects.
    Basically there are two approaches you might consider.
    You could insert Positioned Text Boxes and configure them to present the images as you want. If you take this approach, you will likely find yourself struggling to maintain the positioning consistently as well as noticing text flow issues. Personally, I'd avoid that approach.
    The other approach involves displaying the images in your Word document so that you see them as intended, then screen capture so you grab the combined image. Then save that combined image and use it instead of the separate images in RoboHelp. This is the approach I'd suggest and that I use myself.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Why is the stroke causing a blob during the animation of my text?

    Hi,
    I have a simple text layer that I have applied a stroke to and then added the text animation preset "blur by word".  During the anmiation, the stroke causes this ugly blob of black. See attached image.
    How do I fix this?
    Thanks,
    Scott

    Don't use layer styles to produce a stroke. This works based on a threshold and naturally using a blur and introducing semi-transparent areas will wreak havoc with this. Use the text's native outline or use duplicate layers and pre-composing to get the look you want without making a mess.
    Mylenium

  • Why do the circles around the numbers on the lock screen only sometimes light up?

    I don't know why, but sometimes, they light up as white circles, but other times, only the ones near to the centre of the wallpaper light up, and only the parts nearest to the centre of the screen. That'll be to do with the wallpaper itself, as it's got a bit of a white bit in the centre and black everywhere else - but why do the circles only sometimes light up? And is there a way to make it so the circles are always lit up?

    Hello DanteAllege,
    Thank you for using Apple Support Communities!
    It sounds like the keys on the passcode lock screen dont light up consistently.
    I want to recommend a couple of things here. First close all the apps that are running on the phone:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    Then restart the phone:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Take care,
    Sterling

  • Why are the stroke effects on my vector shapes in PS5.5 not showing?

    They were there earlier...
    Layer effects are enabled for the affected layers and the layers show the stroke effect active on the shapes, in a colour and size that would be very visible.
    Is there some other overall setting I may have accidentally triggered?
    I've tried restarting a couple times.
    Thanks,
    Joe

    Thanks Mylenium, I just checked that and that's not the problem...
    Other files are fine, so it must be something specific to this file...
    Strokes on single lines (unenclosed shapes) are fine in the this problem file too.

  • Why does the creative cloud application not load?

    I am trying to upgrade lightroom 4 to 5, and i can't access it through the creative cloud app because it won't load. I even bought lightroom and photoshop creative cloud again, but it has to download through the cc app.

    Link for Download & Install & Setup & Activation problems may help
    -Chat http://www.adobe.com/support/download-install/supportinfo/
    OR
    Some download & install troubleshooting links
    -Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    -http://forums.adobe.com/community/download_install_setup
    -http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    -http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
    -http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
    -Server won't connect https://forums.adobe.com/thread/1233088
    -AND JUST FOR MAC USERS - Some 10.9.3 links
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Why is the website tutorial no longer loading?

    I have installed the software recently and made a start on the tutorial but 2 days later the website will not load, I have no problem with the internet connection. 

    Sometimes, sites divide their content and login logic over multiple servers. In that case, the sites may not recognize that you have logged in if you block third party cookies. Can you check your cookie settings, as described in this article: [[Websites say cookies are blocked - Unblock them]].
    During your earlier troubleshooting, did you try the site in Firefox's Safe Mode to rule out an extension as the potential culprit? More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • Why is the new tabs page not loading?

    My firefox is supposedly up to date but the new tabs page isn't loading nor is the icon in the corner coming up so I can turn it on.

    then please try running firefox in safemode once and see if this is working as intended - maybe one of your extensions is interfering...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Why is the new Orkut version not loaded in Firefox Aurora?

    The new version of Orkut was normally loaded on Firefox Aurora, then only the old version is available. =

    Lr 3 is ancient in software terms - you can't expect a software company to update old software for new cameras ad infinitum.
    Two options: upgrade to Lr 5 (which is a bargain, and well worth the price of upgrade), or download the free DNG converter, convert the NEFs to DNG, and convert them in Lr 3.

  • Why wont the latest version of iTunes load omn to my windows operated PC

    I keep getting error messages for version 11.1.4.  Help.

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Why did the new version didn't load my library?

    I had 100's of song that I imported from cd's over 15 years, and all the upgrade till now, my library came with it. The new version took it all away.
    The other issue with the new version is that you can no longer get track names.
    This has been the most frustrated version. I can't get all those somgs back, and iTunes doesn't seem to care.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.

  • Why does the iPhoto library file copy so slowly?

    Every few months I back up all the important stuff on my MacBook Pro (Mid 2012, 13", 750GB) to my 3TB external hard drive.
    This has worked well for as long as I can remember. I used to have a proper backup program but due to the nature of my work and files, recently I prefer to just manually copy over each individual folder in my parent home folder, so I can have control of what is replaced and what is merged, etc.
    However this time backing up, I had to copy every folder and file in 'Pictures' separately. This is because after trying to copy the parent folder in one transfer it didn't seem to be working well. I noticed that around the 11.22GB mark, the transfer would always slow right down from ~35MB/s to ~0.5MB/s. As you can imagine, with a Pictures folder totalling almost 300GB, this isn't something I wanted to put up with.
    In the end, I figured out what was causing the issue. I tried copying just the iPhoto library file and discovered the problem occurred again.
    Why? Is this a Yosemite bug or is it to do with the way that the file is structured?
    It works fine otherwise and does not seem damaged.

    no idea
    maybe if you provided some information someone could help
    What version of iPhoto? Of the OS? Why do you think it is getting larger? what exactly are you doing?
    Could it be downloading photos from Your PhotoStream?
    LN

  • Why is the "Quick Selection Tool" working so slowly? - Photoshop CC in Windows 7

    Every time I try to use the Quick selection tool, it takes a REALLY long time to select. I had CS5 and it was super fast, even with large RAW files. Now with CC, it takes at least 20 minutes to select a person out of a photo.
    I already tried "resetting" the tool - that did not work at all.
    Please help!

    I mentioned working on my laptop without GPU acceleration, and how much it slowed everything down, but Quick Select was still laggy after the driver updated and GPU acceleration restored.  This is a reasonable laptop with i7, 16Gb and GTX680. Thankfully, I got my main system back yesterday, and Quick select is pretty much instant.
    But there shouldn't be that much difference.  The big box has six core running at 4.2Ghz (under load) 32GB and GTX570, so while it is certainly more powerful, the difference in performance in respect to Quick Select is not proportional.   I've just tried reducing cache levels on the big box from the '6' it usually runs at right down to 2, but it still responds instantly even with large files.  I have GPU set to Advanced, and tile size to 128 on both systems.
    Another odd thing is that I only have 1GB vRAM with the GTX570, where the GTX680 has 4Gb of faster vRAM.  But maybe Quick select is not a big user of GPU acceleration. 
    So no real help I am afraid.  I have looked through the GPU FAQ, but nothing helpful there. OK,  I have just found a more detailed article on GPU acceleration, and it mentions a lot of features, but not Quick Select, so it could be that GPU is irrelevant.   The laptop is Windows 8.1 as opposed win 7 for the big box, if that makes a difference.  Can you correlate anything between our systems?  I hate to post this without any suggestions, but I'm stumped. 
    There are tricks to aid Quick select. 
    Make a copy of the layer, and apply Curves and/or Levels directly to the layer, and try to increase contrast between the subject and background.  Use this layer to make the selection, then switch back to the normal layer to use the selection.
    I don’t know if this will work as I have just thought of it.  Copy the layer, and Free Transform it to a smaller size.  It will be image dependant, but Quick Select is much faster with images below about 1500 pixels wide. Use Quick select on the smaller image layer, and copy the selection to a new layer. FT it back up to size, and it should fit.  This would only be useful if you are going to use Refine Edge right after, and will have obvious limitations.
    Make sure you report back if you find a solution.

  • Does the problem with Firefox 36 loading slowly with Norton need a proper fix or will this sort itself out automatically?

    The suggested solution of excluding Firefox etc from Auto-Protect, SONAR scans speeds the loading up as a temporary measure but surely leaves the system exposed to any corruption of Firefox elements at a later time?
    (The loading time already seems to have reduced significantly over the last couple of days without this exclusion)

    I think maybe they need to talk to each other. It was only when Firefox upgraded to the new version (36) that this problem occurred, so there must be something about this that is causing a problem.

Maybe you are looking for