WHY do these discussions not

Why do these discussions not show # of views and replies anymore? I mean, why remove that info from the page?
And why make the discussions overall less functional and rather icky..?
WHY WHY WHY?

I can't even EDIT my question which i just posted above.
And the discussions are MUCH slower now on my computer. Very difficult to use. (Is this by design perhaps..?)
And when I try to "Reply"--i get an error message in a pink box saying
  "An error occurred while trying to submit your post. Please try again."
That would be an error by the Apple programmers, i guess. At least i can go to the "advanced editor" (a small, grey link in the corner) and submit the reply, but that in itself is absurd. And the "Advanced" editor forces a text box width of nearly 1024, meaning it MUST go off my screen on one side. Pathetic. This is stuff that programmers figured out how to avoid in the 1970s. Hello, Apple.

Similar Messages

  • Why are these Webservices not supported in VC ?

    Hi all,
    I am using NW04s SP9, and I plan to make MDM-Application with VC.
    Therefore I introduced MDM-WebService into NW and defined it on VC.
    but "searchRecords" of "MDMSearchRecords" was displayed with "Not supported"
    in the right frame .
    Mmm...
    So I decided to think from a beginning.
    [http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl|http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl]
    I defined above it on VC and I used "Getholidaydate" .
    Good! .
    However,,, "Getholidaysforyear" was also "Not supported".
    Why are these methods "Not supported" ? .
    and how will come to be usable these methods in VC? .
    Thanx in advance.
    Regards,
    k.sugimoto.

    Hi
    Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
    Best regards
    Vincenzo

  • Why are these words not acceptable?

    Following up from another question regarding the frustrating password validation, you answered back that these following words were not acceptable in one's password:
    1234
    4321
    qwert
    test
    skype
    myspace
    password
    abc123
    123abc
    abcdef
    iloveyou
    letmein
    ebay
    paypal
    I understand that it'd be a problem if someone used one of those alone without any prefix or suffix with it, but WHY are you blocking it altogether? Why not allow it at least in middle of a cryptic word, like !@#$skype**&& , or ()()skype<><> ?
    It seems your password validation rules just check for an occurance of those words (some of which are questionable as to why it's blocked in the first place) anywhere in the string.
    Why are you making it hard for your users to come up with a password they can remember?Pretty much every other services (gmail, facebook, twitter, etc.) are equally as important and used (if not more important/used than Skype, on a daily basis) and don't enforce as much password rules and blocked words.
    It would be nice to see Skype go in the direction of 2-step verification like Gmail has.
    Use a simple password, bind a Cell-Phone number to it, get your temporary code via txt-message (if it's your first time on that computer / non-cached in browser), Simple!

    Hi
    Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
    Best regards
    Vincenzo

  • Why do these people not have a phone number to contact them. I have been email them for 3 days to correct a problem

    I installed the latest software on my IPhone, and when I received messages to update my apps it sent me a message stating "your ITune ID is disabled".After sending 3 request for help to support I finally got an answer. Now that I have talked to them and that problem is clear, now my credit card on file has been disable and I can no longer use it. They are telling me since I report an unauthorize purchase the card can not be used. It's the only credidt card I have. I said nothing to them about any purchases, it was their software that caused my orginal problem. ITunes solution I have to buy a $50.00 gift card. I will not down load $50.00 worth of apps to my phone. 

    Why are you posting this on a user-to-user forum? 
    What do you expect us to be able to do for you?

  • There a lot of accounts of apple,where are many games,these accounts are sold every day,i know that only 5 person can download one app,i want to know why this accounts are not blocked

    There a lot of accounts of apple,where are many games,these accounts are sold every day,i know that only 5 person can download one app,i want to know why this accounts are not blocked

    This is not a technical question, and discussions of Apple's policies are not appropriate here. If you have some sort of problem with your own iTunes Store account, by all means let us know and we may be able to help you, but otherwise this question is not one we can discuss in these forums.
    Regards.

  • HT3231 why do all these pages not tell you where migration assistant is on a mac pro. they all say what to do when you have it however this is of no use if you are unable to find.

    why do all these pages not tell you where migration assistant is on a mac pro.  They all say what to do when it is on however this is of no use if you are unable to find it in the first place.

    In the Utilities folder, which is in Applications. You could also use Spotlight to search for it.
    Matt

  • Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?

    There are also iSwifter, Photon, Skyfire, etc., some only support Flash some support Java and Flash.
    Adobe never made a version of Flash for iOS and closed their mobile flash division a couple of years ago. You can get Flash on other personal devices but you will be using a 2 year old version that has not been patched for security vulnerabilities.
    When the original iPhone was released Mr. Jobs said it would never run Java as it was old technology and a security risk. Nothing has changed since.

  • Why is my server not working?  What am I doing wrong?  settings are posted.

    Ok, I'm so overwhelmed, but not willing to give up! I would like to set up this server in my home through our Comcast Cabel modem on a mac mini. Our IP has not changed in 2 years with comcast. If I get this working, I plan to move this server, and go live in our company office, which DOES have a static IP address. But I need to set this up and start testing all the solutions like VPN, iCAL, ICHAT, and Address Book.
    VPN has been my main service to set up first and test! IF I can get that to work, I hope to get the others to work as well. It's also the first mission critical. I think my DNS settings are somehow off either at Network Solutions or something on my server...
    I've been using "help" from various responses to other problemshere in these discussions and other places, and now, I'm just overwhelmed and confused, so it's now my turn to post the problem and ask for help!
    I'll post this with REAL IP information, because I think it will help other people in the same situation. Also, once I get this to work, I plan to move it a new location, and then request a change of my home IP from comcast....
    I welcome and REALLY appreciate any help. I'm at wits end... normally, I can figure these kinds of tech puzzles, but I could use guidance here!
    Thanks!
    Ethan-
    I bought and installed OS X server 10.6. on a brand new Mac Mini.
    Here is the story. The domain I bought and own is bostonbecker.com
    Network Solutions is where I bought and manage the domain. It allows me to change the DNS from theirs to another one, so I have it pointing to a hosting company we use called PaeTec. I can't find a place that lets it point the domain to my home router IP address.
    so inside Network Solutions, the domain name servers are
    HDNS1.FAST.NET
    HDNS2.FAST.NET
    The above domain name servers are given to me from dedicated hosting company to point to their computers.
    To control that dedicated server from the hosting company, we login to that system via PLESK via Safari.
    So, using Plesk, I've logged into our dedicated server, opened the settings for bostonbecker.com and created the following under the control for DNS settings:
    In the picture above, the ip address 24.60.63.216 is my home comcast assigned IP address that never seems to change. the IP address 209.92.71.43, is something else, I don't really know, I think ti's from my dedicated server company. that record was there by default when I first set up bostonbecker.com with PLESK. I left it there.. I also left hdns1.fast.net as the value for bostonbecker.com because I did not know what to do with it.
    Ok... Now lets come to my new server inside my house with Mac OS X server
    Here are my settings:
    Below are some basic checks I did in Terminal:
    Here is the VPN settings panel:
    Below is the L2PT settings
    Below is the PTPP Setings:
    Below is the iChat server settings:
    Below is the router settings I'll change my IP address for security once I get this to work!
    Below is a snap shot of the port forwarding on the D-link gaming router:

    Hello,
    Why are you handing out 192.185.2.1 through 192.185.2.10 in your VPN Addresses
    Should this 192.168.0.XXX through 192.168.0.XXX and out of range on what the router is handing out?
    Why don't you try making your Server 192.168.0.2 using your router as the gateway of 192.168.0.1
    Set your router's DHCP scope 192.168.0.10 through 192.168.0.100
    Set your VPN addresses for L2TP 192.168.0.101 through 192.168.0.149
    Set your VPN addresses for PPTP 192.168.0.150 through 192.168.0.199
    Thanks,
    ebrind
    Message was edited by: ebrind

  • Why sender agreement need not to create for IDOC

    Hi Experts,
    why sender agreement need not to create for idoc

    Please check these related discussions:
    Re: Question on sender agreement
    Re: IDOC and HTTP Adapters - sender agreement ??
    Re: ** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?
    Many threads with the same Q are answered on SDN....so if you search you can find the correct answer that you need!
    Regards,
    Abhishek.

  • Why is Mountain Lion not available for Mac Pro 2007???

    Why is Mountain Lion not available for Macpro 2007 eventhough this computer is not having old generation hardware like of 15years ago's computers!! I am surprised to know about that. when this mac pro have 2 xeon processor, 8GB ram, OS 10.7.5 (Lion) etc etc. so why is this not compatible for mountain lion???
    Very Sad for us - the buyer of so costly Macpro ....
    so does the Apple want to say we should buy or upgrade our purchased costly apple products every 5 years ??!!

    This is a user forum. We are all users like yourself. Conjecture about Apple's products is not appropriate discussion in these forums.

  • HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIME

    HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....

    These are user to user forums.  You ARE NOT addressing Apple by posting here.
    Also, why are you YELLING at us??  Stop using ALL CAPS.
    What steps have you done to try and fix the problem?

  • Why are animated gifs not displaying animations in the preview?

    Why are animated gifs not displaying animations in the preview?
    My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
    I'm using Windows 7 32 bit
    My coworkers are using a mac.
    One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
    Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

    I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

  • Why is the text not the visible in the protected PDF opened on Mac?

    Long story short:
    I've created a document in Microsoft Word 2010 and saved it as PDF. With the .pdf open now in Acrobat Reader 9.4.1 I have enabled the protection over the .pdf file by only allowing Printing and saved the protected .pdf. All of these actions are made on Windows 7 machine. Now when trying to open the protected .pdf on Mac (with Snow Leopard 10.6.6 and Preview) the .pdf opened only shows the lines and bullets but not the text.
    Why is the text not visible in the protected PDF opened on Mac?
    (is this bug or a "feature"?)
    Note: the protected .pdf looks good on Windows 7 and it works on Mac if the .pdf has no protection.
    Thanks!

    A. What application are you using to add the protection? Reader cannot add any file security and I don't think the PDF feature of Word will either.
    B. Mac Preview has issues with PDF standards so there may be some features that you will experience issues with that have no workarounds.
    C. Have you checked the file after adding security to see if all fonts are embedded?

  • Why do my panels not work in CC 2014

    I made my own panels in CC but they don't work in CC 2014. I miss them.

    It's the latter. Thank you for answering my question.
    Op 21 jun. 2014, om 09:42 heeft Trevor Dennis <[email protected]> het volgende geschreven:
    Why do my panels not work in CC 2014
    created by Trevor Dennis in Photoshop General Discussion - View the full discussion
    Are you talking about a custom workspace, or actual panels made with Configurator?  If the former, then go Preferences > Sync settings.  If the latter, then those Flash panels no longer work in CC 2014.  Check out any of the multiple threads about Extensions being greyed out.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6481073#6481073
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Why does my iMessage not work even with my apple ID signed in?

    Why does my iMessage not work even with my apple ID signed in?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    Send an iMessage as a Text Message Instead with a Quick Tap & Hold
    http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom
    BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

Maybe you are looking for