Why do video fx turn my clip into audio only?

I only need to add lightning to one of my clips, but when i apply the setting, the clip goes black and only he audio comes up. The clip still shows up on the timeline viewer

never mind i had to reset imovie

Similar Messages

I have imovie and my files (movies) open. Why can't I drag the clips into iMovies?

I have imovie and my files (movies) open.
Why can't I drag my clips into imovie?

Drag and drop doesn't work - instead do a File -> import -> movies and select from there.

Editing: How to turn a clip into slow motion

Is it possible to turn a clip into slow motion?
Message was edited by: jthfour

Yes.
Use Modify>Speed. (Command-J)
Set the % to less than 100. eg 50% is half speed, 25% quarter and so on.
Check the Frame Blending box.
Al

When using ipad4, why do videos not play on Google? Audio works fine

WWhen using ipad,why do videos not play on Google? Audio still plays. I have reset the Google app and it will be ok for short time but then reverts back to not playing videos.

Hi Vernon70,
Welcome to the Apple Support Communities!
I understand that an application you downloaded from the App Store, Google, is not functioning as you would expect. In this situation, I would recommend following the troubleshooting steps outlined in the attached article.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best regards,
Joe

Why can't I drag a clip into the timeline?

I just loaded PP CD5 onto my Win 7 laptop. I can import movie clips into my project, but I can't drag any of those clips into the timeline. When I try to drag them, I get a hand with a "do not enter" symbol. No error messages of any kind.
I vaguely remember having this same issue when I loaded PP CS5 on my Win 7 desktop several months ago, and I thought I found something on the forums that told me how to fix it, but I can't find it now. Perhaps a change in the preferences?
Any assistance is greatly appreciated.

Did you actually create a sequence? If not, go to File > New > Sequence, or drag one of your clips to the New Item icon at the bottom of the Project Panel. You can also click that to get the New Sequence option.

Why is video twice as fast as my audio and how do I fix it?

When I log and transfer my clips, the audio is fine, but the video is twice as fast. Help?

Not really. What's the camera? That might help.
No idea what HE180i60 means. Is that some manufacturer's code?

Anyway to turn all tracks into audio all at once without bouncing

I have old sessions using midi samples from old hard drive. I would like to make all tracks audio before retiring the Hard drive

You could use the Export function "all tracks to Audio data" (to be found at the bottom of Save menue). This will transform your Midi Instruments into Audio (it ignores the Automation though).

How does exactly AMS sync a video stream with another stream of audio only ?

I have the following situation: 2 instances of FMLE on one machine and another machine with AMS Starter.
The instances of the FMLE are:
1. Video H.264 + audio MP3
2. Audio only MP3 - track 1
The application on AMS is a livepkgr/_definst_ and i am using HDS with a live event
I have an OSMF based player to consume the streams and to do audio switch using late binding audio.
When I consume the Video with the Default audio everything works just fine. The problem is that when I try to consume the Video with the other audio track, the audio tack has a 1 second delay compared to the video.
I have tried to fix this by changing the configurations on the FMLE, but it doesnt seem to work. So I really want to know how does exactly AMS syncronize differents streams, in this case a video stream with a different audio stream.

First, what is the file format, and its specs. for the remote recorder?
Though the rates of modern cameras and digital recorders SHOULD match 100%, in the real-world, they seldom do. This make perfect syncing a labor intensive process.
One should do tests between the cameras and the recorders, to find out the % or error. Then, adjust their Audio to match first. As an example, one user in the PrPro Forum tested his Panasonic cameras, and his Zoom recorders, and found that the Zooms were off by 0.04% constantly. To correct this, he used the Time Remapping (with Maintain Pitch checked), and would apply that adjustment to all of the Zooms' files - perfect sync.
As for the Waveform not displaying for your remote recorder, did you allow those files to completely Conform (creation of the CFA and PEK files, the latter is the Waveform Display)? See this article: http://forums.adobe.com/thread/726693?tstart=30
Also, you should be able to increase the vertical zoom of your Audio Tracks, and hence any Clips on them, by hovering the Cursor over the junction between Tracks, in the Track Header, and when it turns into a = sign, with up/down arrows, click+drag. Then, you should be able to find commonality in the beginning, to sync up to. Tip: for this critical work, toggle the Snap feature OFF, with the S key.
Good luck,
Hunt

Video cable for the Iphone 3G - audio only, no video output to TV

I have been reading that with the iphone 3G you HAVE to buy apples video cables in order to play back video on your TV, is this true?
I just got a cable for christmas and it isn't officially licensed by apple and the video does not output to the TV, only the audio. I hope this isn't the case, but maybe it is true??
If my cable isn't working because of some need (forced on us by apple) to only use "apple" cables I will never purchase videos from itunes. It seems rather trivial to have to buy proprietary cables for more $$ in order to buy videos from itunes doesn't it??
In other words... Give us more money so you can keep buying things from us.
Sorry, I am a bit frustrated.
Message was edited by: zstevek
Message was edited by: zstevek
Message was edited by: zstevek

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

Why does adding a title turn the clip into square pixels in cc

I added a still Title to a multicam sequence, and the clip beneath it turned into square pixels.
If this is a problem with Adobe, how can I work around it?

I thought Sony DSR - PD150P, The 'P' at the end signifies PAL?
If there is nothing to worry about, what about when I export the media to DVD PAL UK region? Is there no going to be a conversion from Interlaced to PAL? Would the conversion from interlaced to PAL no mess up the quality or introduce artifacts?

Just started happening: Can no longer drag clips into Audio 1

Hi- I just encountered a problem. When I drag a clip from the source monitor, the audio automatically splits to Audio7 & 8. Can someone explain why this is happening? Is this a problem and if so, how do I fix it?

Thanks for the quick reply...
Does it really matter if the audio is not in the Audio 1 line? I'm trying to get myself to stop worrying about the non important stuff and finish the project.
My ADD is horrible, things like this distract me! The final outcome is a video testimonial page for a client... so I'm not looking for 5.1 audio.
Is this a big deal?
Untitled from Chris Ratchford on Vimeo.

Ipod touch 4 freezes in middle of video and turns it black but audio still continues to play, how to fix this and what possibly caused it?

Help out? i was watching a 43 min episode and it works fine in the first like 20 minutes but later on in freezes, it turns the screen completely black afterwards, there's still sound, but theres no video, the screen is completely black while audio continues to play. How to fix this? and what were the possible causes for this?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Delete/unsunc he video and then resync/redownload
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Installing Yosemite failed, and it turned my disc into "read only"

Tried to upgrade my MacBook Pro (Early 2011) to 10.10 from 10.9.5 AppStore. It failed after reboot. Then the disaster began...
(Yes, unfortunately I didn't backup...)
My disc became "Read only":
I couldn't install 10.10, neither reinstall 10.9.5.
Tried to repair the disc and permissions with 10.10 Disk Utility, both failed.
Tried Disk Utility in 10.9.5 recovery, it says "unable to mount the disc".
Tried to use Disk Utility "Restore", to copy the entire volume to another disc, it gave me "Could not restore - Input/output error",
Tried to create a new image from that disc, still Input/output error.
Then I used a new disc, clean installed Yosemite on it. However, I couldn't migrate my data from the old disc. In Migration Assistant, it couldn't find any source. (Tried to connect to another disc with clean installed Yosemite, Migration Assistant could find it)
When I tried to simply copy "all files" (including all hidden files) to another empty disc, I always ended up with "The operation can’t be completed because you don’t have permission to access “some file”." ("some file" changes every time).
Thai disc had been working for over one year without any problem, until I hit "Upgrade to Yosemite"...
It's been a week now, and I have no idea what else I can try to repair my disc / make it writable again / migrate system information from that disc... Please help!

First, look at this article and see if your model can do an Internet Recovery: Computers that can be upgraded to use OS X Internet Recovery. If yours needs the firmware update, then do that before moving on.
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If for some reason your hard drive cannot be repartitioned or is not even visible in Disk Utility, then the drive has failed and needs to be replaced.

Video transfer to PC but got audio only, no video.????

hello,
I have a Curve, 8330. I took my first video, a one minute epic. It plays great on the BB. I was able to transfer it to my PC, but I only get audio, no video. I tried both an email transfer and a direct cable connect with ROXIO. It saved as a Quicktime file, but just won't play right. What am I doing wrong? I also tired opening it as a WMP player with the same results; audio but no video.
MDH

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

All video fomats import as pixelized or audio only

The video was recorded on a gopro camera and is an H 264 format with an extension of mp4
When I import the file as is, it comes in as just an audio file
I have also tried avi and mov (renamed the extension) - both of those import with the video but is pixelized
What do I need to do to bring the files in properly?
I am using PE version 12.0
Forgive me as I am a new user and don't know much about codecs
Thanks for your help

The camera is GoPro Hero3 Black Edition
recording in 4k CIN 12 fps
Computer OS is Win8
CPU - 2.4 ghz
Ram - 8 gb
UAC is on - I will turn it off to see if that helps
Also, I am log in as an admin but did not start program as admin - I will try that too
I have QT version 7.7.5
I pulled up on of the files and selected movie inspector -insterted a screen shot below.
I have tried various project settings and to be honest, the settings are over my head so I don't even rememeber what I selected. I know I selected DSLR 1080p24 and AVCHD 1080p60...both had the same resluts
Also I converted the file to an avi file using GoPro's Studio. The video still comes in pixelized.
I noticed the video is jumpy when played in GoPro's Studio when playback is set to Best (Full Res) but better when set to draft. Could it be I don't have enough memory?
Thanks again for your help

Why do video fx turn my clip into audio only?

Similar Messages

Maybe you are looking for