Why do videos stop before reaching the end

Videos on You Tube have suddenly started to freeze after playing for 10-12 seconds. Is there a particular setting I should alter to correct this?
Peter

It takes time to download a video - more time if you're using 3g, somewhat less time if you're using a faster WiFi connection. When you push the play button, the player doesn't wait until the video has completely downloaded before it starts playing. It plays faster than it downloads, so eventually it catches up and runs out of content to play until more has downloaded. When this happens, it stops. Next time this happens, just wait (and wait...) and eventually it will start on its own. The longer you wait, the more you have in the 'buffer" and the fewer stops.

Similar Messages

Video goes back to menu before reaching the end of the timeline.

Hi.
I´m having a problem with a Double Layer DVD project in Encore CS3: a 1 hour 30 minutes video goes back to menu before reaching the end for no apparent reason.
I don´t know if this is related to the layer break point of the DVD-DL. I just leave this setting in auto and burn the disc with Nero.
Any input would be appreciated.
Thanks.

Well, I forgot to mention that I was burning the DVD disk with Nero, as I´ve read that Encore puts the layer break point in a weird way.
But after burning the disc with other aplication, the problem disappeared, don´t know why.
Sadly, now I have another different problems. I´ll open a different thread for them.

Media encoder stops encoding at the end of the video (Premiere CC 2014)

I've finished editing a video (just under 4 minutes). When I try to export it to a windows media file (HD 1080p) it always stops encoding at around the 50% mark.
I have tried exporting to a shared network drive as well as the local hard drive with the same results.
I have it set to: Mercury Playback Engine Software Only
I have tried to export directly from Premiere and from Media Encoder.
I looked at where it stops when exporting from Encoder through the preview window. It seems to reach the end of the video and stops right where I fade out to white and the music ends. The interesting part it that the timer shows 50% left to complete
It doesn't crash... it just sits there with the timer increasing and never continues
I'm not using any plugins.
At the point where it stops, I have a "Dip to White" transition on the one video clip and no audio transitions applied to the soundtrack since it ends nicely with the video.
Please let me know if there's anything else I can/should explain to get some help. Thank you so much for your help.
System details:
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Z230 Tower Workstation
BIOS: Default System BIOS
Processor: Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz (8 CPUs), ~3.6GHz
Memory: 16384MB RAM
Available OS Memory: 16070MB RAM
Card name: Intel(R) HD Graphics 4600
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Display Memory: 1696 MB
Dedicated Memory: 64 MB
Shared Memory: 1632 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)

Peferling... I have a positive update! I went to the area that typically made things die. I noticed it was at the tail end of where I inserted a sequence into another sequence. I also noticed I had three tracks in that section with graphics. So I copied all the tracks from the inserted sequence... then removed the inserted sequence and re-inserted the actual tracks. At this point I no longer had an inserted sequence. I then simplified the three tracks of graphics into one. Re-applied my transitions and did last tweaking. I once again tried exporting as H.264 HD... et voila! It worked! Something must have been breaking it.
For now I'm okay and have been able to export into other formats. I want to thank you so much for your input. Regards, Nelson

Before reaching the high unit, 'End of file reached' error pops up.

Following is the <distributed-scheme> of my cache server.
<distributed-scheme>
<scheme-name>dom-dist</scheme-name>
<service-name>DOM-CACHE</service-name>
<backup-count>1</backup-count>
<backing-map-scheme>
<overflow-scheme>
<scheme-name>dom-overflow</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>LocalSizeLimited-dom</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<external-scheme>
<eviction-policy>LFU</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
*<high-units>8192</high-units>*
<unit-factor>1048576</unit-factor>
<lh-file-manager>
<directory>/home/coherence/cachedata</directory>
<file-name>{cache-name}.store</file-name>
</lh-file-manager>
</external-scheme>
</back-scheme>
</overflow-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<local-scheme>
<scheme-name>LocalSizeLimited-dom</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>350</high-units>
<unit-calculator>BINARY</unit-calculator>
<unit-factor>1048576</unit-factor>
</local-scheme>
</distributed-scheme>
+I could see the file {cache-name}.store is saved but before reaching the high unit (8192) following error pops up and then the node shutsdown.+
Error:
2009-07-28 08:41:42.253/52233.963 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=2):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)2009-07-28 08:41:42.254/52267.134 Oracle Coherence GE 3.6.1.0 <D5> (thread=Cluster, member=1): Member 2 joined Service DOM-CACHE with senior member 3
2009-07-28 08:41:50.228/52275.108 Oracle Coherence GE 3.6.1.0 <Error> (thread=DistributedCache:DOM-CACHE, member=1):
(Wrapped) com.tangosol.io.lh.LHIOException: /home/coherence/cachedata/BIZ-DOM.store, Primary file, Reading, Group 886, Frame 886: End of file reached.
at com.tangosol.io.lh.LHBinaryStore.load(LHBinaryStore.java:109)
Edited by: online247 on Jul 19, 2011 3:07 PM

Hi Online247,
Despite LH has been deprecated and overflow-scheme is not used by many people, using disk based overflow as shown at the URL below could be useful for what you are trying to achieve:
http://hi.baidu.com/chenjf79/blog/item/42be1a2adf6d059c033bf691.html
Hope it helps.
-Cris

Why is my project freezing at the end of each video demo?

I've created a project with three different video demos. I've done all the editing and have the video slides in the right order, however, each video demo freezes at the end instead of continuing on to the next video demo.
Please help.
Thanks,
Jaimie

Are you positive that it's not just downloading the next video in the background and that's why it just looks like it's stalled? What happens if you just let it sit there for a minute or two? Does the next slide then start playing?

Is there a way to link text fields, so when you reach the end of one line it moves to the next?

I often use Acrobat Pro to create forms, whether it be from an existing document or from scratch, and this has always irritated me. I know you can create a text field and select the Multi-line option; however, this is not what I am looking to do. I have a form that has a Yes or No Radio Button, then below it says "If yes, please explain:" followed by 3 lines to respond. When I run it through the Form Creator, it places three text fields on the response lines - as it should. The first line is shorter because of the text, which is why I cannot use the Multi-line option. So is there a way to link these three text fields, so that when I reach the end of the first line it stops and automatically moves to the next?
Here is a picture of what I am looking at:

These types of lines are a left-over from printed forms. There's no reason
to keep using them if your form is digital.
The best approach is to combine the fields to a single multiline field, and
get rid of the first line. Trying to link text fields together is very
tricky. I haven't yet to see it done properly.

I have an ipod touch 32gb. Model: MC008BT Version: 5.1.1. 3rd ed.   Recently when clicking play on any song the ipod will shuffle through as many songs as there are in the album or playlist until it reaches the end without playing any songs. It also does

I have an ipod touch 32gb. Model: MC008BT Version: 5.1.1. 3rd ed.
Recently when clicking play on any song the ipod will shuffle through as many songs as there are in the album or playlist until it reaches the end without playing any songs. It also does not go through each song. For example:
a 62 song playlist. I start on song 16. Immediatly the song will shuffle: 16-26-54-62 and then back to the main screen. Also when the songs are shuffling the play button in the top right corner is on.
Music will play if i start from track one with shuffle turned off and repeat turned on. But then i am limited each time to 1-5 songs.
Ipod has been in excellent working order since this has happened.
any suggestions on how to fix?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Im trying to install iTunes on my friend's Dell XPS, running windows vista ultimate (32-bit), but whenever I reach the end of the install, it pops up with an error telling me: "Service 'Apple Mobile Device' (Apple Mobile Device) could not be instal

Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Current Time code field and "Capture Now has reached the end of tape......"

Hi I just got my new iMac and I have lots of space. When I open up the Final Cut Pro and press the capture now it gives me the notice that it had reached the end of tape, but I haven't reached the end. I have vhs in the VCR machine and it is connected through the digital device. Not only that but my current timecode field is always running and I can't stop it. Also I used the uncontrollable device and when the tape has reached the end I tried to escape but it seizes up and I lost my capture. what shall I do?

Yeah, I was just thinking about that. I'm doing this on an iMac.
What's going on with Capture Now? I know staying digital would be best. But I'm kinda doing this project to give myself some hands-on time with FCP to get familiar with it. I'd like to capture this stuff through the Log And Capture GUI if I can. Sooner or later, I'll need to do it with something else (possibly an old VHS tape) where I won't have the option of staying digital.
Anybody?

Tab canvas disappear when the main stacked canvas reach the end of column

Hi all,
I have 3 canvas ( 1 main canvas, 1 stacked canvas ) and this link to 1 tab canvas. All these are in the same window.
Whenever using the keyboard to press enter navigate from column to column and when it reach the end of the main canvas which is about to jump to the stack canvas, the two canvas ( stacked & tab ) was hide by itself. Even I have stated earlier to show all canvas in the pre-block trigger. when I keep on press the enter to jump to the next stacked canvas, this stacked canvas is being shown again. My tab canvas was not appear if I am press the enter key. However, if I press the arrow key down the tab canvas is appear. This I wasn't do any code to call the tab canvas.
When I keep on press enter and reach the end of the stacked canvas again the tab canvas is disappear, unless I have press the arrow key down to display the tab canvas.
Trying to use show_view( tab canvas ) in many trigger but still does not show the effect.
Anyone has this experience before ?
Thanks.
Lim

Hi Lim
Pls check this hope it helps u to recognize dealing with muti-canvas in 1 window...
how to use stack canvas in tab canvas in oracle forms
Regards,
Amatu Allah.
Edited by: Amatu Allah on Sep 22, 2011 2:23 AM

Can't tell when i have reached the end of the file

Hi i'm trying to read a character at a time from a file but i can't tell the program when to stop when it has reached the end of the file
THis is the code
BufferedReader br = new BufferedReader(new FileReader("input_dat.txt"));
while ((c =(char) br.read()) != .....what should go here...)
     System.out.print((char)c);

i got it to work
hear is the code if anyone is interested .
int i= 0;
char c;
BufferedReader br = new BufferedReader(new FileReader("input_dat.txt"));
     while((i=br.read()) !=-1)
     c =(char) i;
     System.out.print((char)c);

Why my video stops for sometime while playing on vlc player

Why my video stops for sometime while playing on vlc player?
It started from last week. Whenever I play a video it stops for about 5-10 seconds and then continue playing. I have played mp4 and avi format.
But unable to understand the reason behind it. If someone out here know the reason and also how to fix this issue, please lease let me know.

Nope,
But I just discovered that that it is actually not only the sound that stops working but rather the whole video that has a "hick-up" and then when it continues the sound is gone. If I fastforward/rewind then it seem like the player rocovers and play the stream correctly again.
What are the Mp4 clip prefs you have used when converting?
I am planning to try some other settings when converting to see if that makes any difference but I doubt it will help. I think we will have to wait for a "better" i.e. working Video Player for the iPod ...

Fcp crashed when it reaches the end of tape

When I 'capture now' HDV footage to FCP 6.0.3 using sony HDV firewire, FCP crashes when it reaches the end of the tape. Basically, I've been working around the problem by hitting 'esc' just before the end, but it sure is annoying. Anybody else? Any ideas?

Are you using Capture Now or are you logging your clips then Batch capturing?
-DH

How do i start a motion tween by clicking a button and stop it at the end of the tween.

Hi guys,
I am creating a website for a project and i am trying to activate a box bropping down from another box when i click on the enter here button i have created. I have set the motion tween and its working when i preview i just unsure of the correct actionscript to start this tween when i have clicked the entere here button or how to stop it at the end of the tween.
I am scared i may have made the layers in the wrong place, they are all currently in scene 1. does my second box that is dropping down need to be set inside the layers of the first box?
Bit of a newbie at this.
Thanks in advance!

Create the dropping box movieclip as an animation by itself with a stop() coomand in the first frame and a stop() command in the last frame. The click of the button should tell the movieclip to play(); at which point the animation should play and stop at the end.
Another option would be to use an actionscript Tween to make the box drop. Going that route the animation is what you code it to be and there is no need to have to stop it as it will end where you tell the Tween to end at.

Can You Get iPod To Stop/Pause At The End Of Each Track

I really need my iPod to stop/pause at the end of each track/song, but it insists on playing right through a playlist one song after another. Does anybody know if there is a way of achieving this, there doesn't seem to be anything in the manuals about this. My iPod is new and is the 60GB color screen model. Any help would be much appreciated.
Thanks, Peter.

Hi boaster, is this an apple accessory, or where else will I find one? When you say there will be some manual intervention, I presume you have to press the button to actually stop it at the end of each track??
Dave W. I've tried your suggestion and it works fine. Its also good because it keeps iPod within the correct playlist. The original suggestion of one track per playlist also works, but unfortuanatly iPod defaults to go back to the main menu at the end of every playlist so you then have to navigate back to where you need to be. Dave, it looks like your suggestion is the answer at the moment, many thanks, although would like to know more about this 'airclick' remote please. Cheers.

Why do videos stop before reaching the end

Similar Messages

Maybe you are looking for