Why do we cant get the full amount of storage capacity?
for example 340TB capacity but when i click on the volume, it only less than 340TB?
To answer the question without more details, one would probably need a crystal ball.
Please provides more details, like the number of hosts, raw capacity, formatted capacity, screenshots, ...
Also keep in mind that HDD capacities are usually provided as Base-10 values (marketing size), rather than Base-2 (real size), so with 340TB (Base-10) you may see ~310-320TiB (Base-2).
André
Similar Messages
-
Why can't I get the full amount of hard disk space when I reformat?
I have a 750 GB external Western Digital. I reformatted it using extended journaled setting. When it's all ready to go why do I only get 700 GB available as free space and not the full 750 GB? What is occupying the remaining 50 GB? I guess I could understand a gig or two that I couldn't use, but 50 GB, that's 15% of the disk!!!!
Thank youGets asked frequently....
500GB = 465GB too. Or 1000GB = 933GB.
Then, you will find the last inner tracks are drastically slower than the outer 1/3, too. So chop some off for performance.
699GB is 'normal.' The new WD 640GB Caviar = 599GB, great drive and seems slightly faster than the 750GB due to higher density recording.
You can build your own and choose the drive and case that meets your needs, and avoid the vendor 'tax' or WD "features" and go with a Oxford based FW/USB/eSATA cases. -
Why don't you get the full amount of memory in iPad?
I was wondering why a 64 gb wifi iPad 2, only have 59 gb free space. How and where does the 5 gb being used?
First, it's storage space not memory.
Computers see a gigabyte of data as 1024 Bytes.
Marketing departments call 1000 Bytes as a gigabyte.
All storage makers use 1000 Bytes as a gigabyte.
Also, the firmware takes up space that cannot be used.
This is also reflected in the available space.
Hence my 64gb iPad shows 59.1 gigabytes total available. -
Why can't I get the full resolution on my Ultrawide monitor when connected to my MBP?
I just purchased an LG Ultrawide 29" monitor to hook up to my Macbook Pro (Mid-2010 model). The full resolution should be 2560x1080. The only cable that came with the monitor was an HDMI to HDMI cable, so I used a miniDisplayport to HDMI cable that I had. The screen popped up on the monitor, but it was stretched out, and there was a message saying it wasn't configured to the full resolution (and that I need to change it in the Display settings). The problem is there's no option in the Display settings for anything larger than the 1920x1080 standard resolution for this monitor.
I checked the manual that came with the monitor and it mentions that using an HDMI cable with a mac won't allow me to use the full resolution (or sound for that matter). It says instead I need to use a DVI-D dual link cable to get the monitor to work properly with a mac. Only problem is, this particular monitor doesn't have a DVI port on it (I think the manual was referring to a similar but possibly older version that had HDMI, Displayport and DVI ports on it). This one only has two HDMI ports and one Displayport port on it. I browse around online for people that had a similar problem, and I see a comment saying I just need to get a miniDisplayport to Displayport cable and then everything will work fine. I finally bought said cable (which a lot of places apparently don't carry), plugged everything in, and still no dice. The only resolution options for the monitor are still 1920x1080 and less.
Is this a problem with my Macbook? From everything I've looked up, my graphics card (NVIDIA GeForce GT 330M) should support it, and it says right on the packaging for the Displayport cable that it should support up to a 2560x1440 resolution.Yeah, that's what I ended up doing. It just wasn't worth the hassle. I got a good (standard size) monitor for about half the price of the old one, so I'm not too disappointed. Thanks for your help though
-
Hi Experts,
Please help me to solve this two issues
I will give you clearly about my client requirement
in the current system (existing) already configured for shift allowance.
shift allowance for executive
Shift Allowance Rates
2 shift
3 shift
RM 240
RM 330
shift allowance for non executive
Shift Allowance Rates
Category 1
Category 2
2 shift
3 shift
2 shift
3 shift
RM 180
RM 280
RM 95
RM 130
they are not maintained (there is no any key) in info type 0014 or info type 0015 they earliest hr consultant copied to the Shift Allowance wage types :- 5533, 5534,5535,5536,5537,5538and 5559
Note : 5533 & 5536 are for Payment.
Other wage types are for calculation purposes only.
And they modified (standard LAP9) YAP9 (copied) schema written pcr for shift allowance
The pcrs are YSH1,YSH2,YSH3,YSH4,YSH5,YSH6,YSH7,YSH8,AND YSHF
1) So my actual my client requirement (Issue 1)
In my client current process shift amount is prorating. Now my client requirement employee change shift (SE20321D) to normal (NSO70012) in the mid of the month
employee will get shift full amount
2) client requirement (Issue 2) Shift Allowance become prorate if the Action (Info type 0000) in the same month have changes. (Depand the action type)
Actions are
WA,WB,WC,WD,WE,WF,WG,WH,WI,WJ,WK,WL,WM,WN,WO,WP
XO,X1,X2,X3,X4,X5,X6,X7,X8,X9.
XA,XB,XC,XD,XE,XF,XG,XH,XI,XJ,XK,XL,XM,XN,XP,XQ,XR,XS,XT,XW,XX,XY,XZ.
Y0,Y1,Y2,Y3,Y4,Y5,Y6,Y7
YA,YB,YC,YD,YE,YF,YG,YH,YI,YJ,YK,YL,YM,YN,YP,YQ,YU,YV,YW,YX,YY,YZ
Z9,ZY
Example
in same month employee changed action on 20.07.2014
Kindly help me to solve this issues feel very happy for your help.and if you need any information about issue please let me know i will share to you.
Thank you
RaamaraoTry this, it works very well for me.
import XMonad.Hooks.ManageHelpers (composeOne, isFullscreen, isDialog, doFullFloat, doCenterFloat)
myManageHook = composeAll. concat $
[ [ className =? c --> doCenterFloat| c <- floats]
, [ resource =? r --> doIgnore | r <- ignore]
, [ resource =? "gecko" --> doF (W.shift "net") ]
, [ isFullscreen --> doFullFloat]
, [ isDialog --> doCenterFloat]]
where floats = ["sdlpal", "MPlayer", "Gimp", "qemu-system-x86_64", "Gnome-typing-monitor", "Vlc", "Dia", "DDMS", "Audacious", "Wine"]
ignore = []
myLayout = tall ||| Mirror tall||| Full ||| tab ||| float
where
tall = named "Tall" $ limitWindows 4 $ minimize $ Tall 1 (3/100) (1/2)
tab = named "Tab" simpleTabbedBottom
float = named "Float" simpleFloat
main = do
myStatusBarPipe <- spawnPipe myBar
conkyBarProc <- spawnPipe conkyBar
trayproc <- spawnPipe myTrayer
xmonad $ ewmh $ withUrgencyHook NoUrgencyHook $ defaultConfig {
terminal = "urxvt"
, manageHook = manageDocks <+> myManageHook <+> manageHook defaultConfig
Last edited by helloworld1 (2012-08-14 05:20:56) -
I have bought a few episodes of a new season and would be intrested in getting a season pass. Will I be charged the full amount or an amount minus the episodes already purchased?
You will be charged the full amount.
-
When I export my photos, I am not getting the full mb's, why? What do I need to do differently? Frustrated.
What's the end user going to do with the File? If it's for screen use - Internet, Web Galleries, then 72 dpi is fine. If printing, then 300 dpi is often quoted as a rule of thumb.
In the Export dialogue you can create your own presets or edit the existing one. If you edit you'll see the quality slider. Higher quality means less jpeg compression.
Regards
TD -
i had purchased iphone 6 from the online store and i had peid the full amount by using my cc , i had noticed now that the order get cancelled as its out of quantity , could you please assist me to refund my money back to my cc !!
I am going through the same process! It is a nightmare doing anything with adobe. They make it as difficult as possible to get a refund and keep asking me if i want anothe program instead of a refund. They are making me jump through all kinds of hoops to get the refund and refuse to call me. They have ZERO customer service and the only reason they stay in business is because they have no real competitors. It's a shame, but I suggest you reprot them to the Better Business Bureau. I did.
-
Hi, please cancel my subscription and refund the full amount of $23.99 to my iTunes/apple I.d account. I didn't get a subscription code So I can't quote any.
This is the receipt I got.
Billed To:
[email protected]
Ferragammo kuratti
Order ID: MGNGLN5G0Q
Receipt Date: 09/29/14
Order Total: $27.11
Billed To: Store Credit
Item Seller Type Unit Price
Adobe Reader, Adobe ExportPDF Subscription (Automatic Renewal)
Report a Problem Adobe Systems, Inc. Init. Subscription $23.99
Subtotal: $23.99
G.S.T./H.S.T.: $3.12
Order Total: $27.11
Please retain for your records
Please See Below For Terms And Conditions Pertaining To This Order.
Apple Canada, Inc.
You can find the iTunes Store Terms of Sale and Sales Policies by launching your iTunes application and clicking on Terms of Sale or Sales Policies
Tax Registration #R100236199
Answers to frequently asked questions regarding the iTunes Store can be found at http://www.apple.com/ca/support/itunes/
Apple ID Summary • Purchase History
Apple respects your privacy
Information regarding your personal information can be viewed at https://www.apple.com/ca/privacy/
Copyright © 2014 Apple Canada, Inc. All rights reserved
Mit freundlichen Grüßen/
Best Regards,
Femi Alawode -
I was charged the wrong amount on 3 albums I downloaded. I received an email about special pricing, I downloaded the albums I wanted and was billed for the full amount. How do I get a refund?
Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
why is it that i paid for photoshop for £8.57 a month but then i can only use photoshop as a trail and when i want to get the full version it charges me more money??
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Why dont the ipod touch 4th gen cant get the IOS7 software
why dont the ipod touch 4th gen cant get the IOS7 software update
Because it doesn't have enough RAM to use it.
(92457) -
Why do I keep getting the message "startup-disk is full"?
Why do I keep getting the message "startup-disk is full"?
I checked my memory and it says...
FREE- 2.64GB
WIRED-885.5MB
ACTIVE-237.0MB
INACTIVE-262.9MB
USED-1.35GB
Sorry I know nothing about computers.Ideally an external HD, but at a pinch you may be able to get enough on to USB thumb drives to free up enough space to carry out an orderly backup.
Just remember that you need to move the files, not just copy them; in other words, once the file is on the thumb drive, the original needs to be deleted and the trash emptied to free up the space on your internal. So for any really important stuff you may wish to copy it to more than one drive for safety.
also see;
Freeing space on your Mac OS X startup disk
http://www.thexlab.com/faqs/freeingspace.html
How to free up my disk space
http://www.macmaps.com/diskfull.html -
Why can I not get my full contact photo when recieving a call ???
Victoria Borthwick wrote:
I submitted my complaint on this site www.apple.com/feedback
Good idea. Now you can go about your day and do other things, and hopefully Apple will provide an option for full screen caller ID. -
Hello,
I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
Thanks,
Best WishesWhen did you buy it?
Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason. Return it and get your money back, then use that to purchase an unlocked phone.
Maybe you are looking for
-
How do I modify an arbitrary component value during a simulation?
I am a new Multisim user, beginner SPICE user, but with some undergrad and graduate EE coursework, and some "real world" experience, but I don't pretend to be an EE by long shot. I am moving to Multisim from a competitor. In the competition, I can o
-
I thought this would be an easy question to google but I can't find a simple Yes or No. My app uses some components that are not currently developed for windows phone 8.1 so I was going to build the app in the Windows Phone 8.0 SDK. But I know that
-
Flicker free page updates with JSF?
My JSF app is running but there's flicker when I click the update button to get my search results. I basically forward my page to its self in the faces config file, so I figured this would happen. <navigation-rule> <from-view-id>/Inputname.jsp</fr
-
DM 3.0.0.665: Disabled flag "Engineer To" is not saved
Hi, I disabled the flag "Engineer To" for a table in the logical model in the Entity Properties and saved the changes. When I now engineer the logical to the relational model, the table is not taken into the relational model. But after closing and op
-
Hi All, I have a SQL database. I am finding it hard to list the colums names of a particular table in my DB. can someone please tell me how i can see just the colum names in the table? using SELECT * FROM <TABLENAME> from the command line is not help