Why do we create message types (we81)?
Hi Guys,
Could u plz explain me for wht purpose message types r created?
thanking u...
regards..
hi
good
A message type comprises a data type that describes the structure of a message. At the following points in SAP Exchange Infrastructure you can refer to the message to be exchanged at runtime by using the message type:
· More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
· When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
http://help.sap.com/saphelp_nw04/helpdata/en/2d/c0633c3a892251e10000000a114084/content.htm
hope this will help you.
Thanks
mrutyun^
Similar Messages
-
What is the Technical Reason for Creating Message Type
Hi,
Is there any particular reason to use Message Type. Already we are defining Data Type. Please give me some detailed explanations.
Thanks in Advance.
Thanks & Regards,
Giridhar.CHi Giri,
SAP telling below reason why we are creating message type
"A message type comprises a data type that describes the structure of a message. For technical reasons, a data type alone is not sufficient to describe the instance of a message: Data types are defined in XML Schema as abstract types that are not yet tied to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message"
Regards,
Raj -
Why should we create data type
Hi all,
I have a basic question!
why do we create data type and then wrap it as message type?
why dont we directly create a message type and use that ?
please give the answers. Thanks in Advance.Hi Seshu,
Please go through below links, you get answer
message type and datatype
Difference between Data type and Message type - Process Integration - SCN Wiki
Regards,
Krupa -
Bapi for creating message type in a sales order
Hi, I am involved in a IS-MAM project for an italian company.
I need to create or add a message output type in a sales order in a complex batch program. I thought to use a bapi technicality; in particular BAPI_ADMGMTSO_CHANGE in order to change the document.
How can I create message type in the order? Can I use the same bapi or I need of an other one?
thanks in advance for your help
LuciaCan you please provide more information...
-
what are the possible way to create message type and how you link the message type with idoc type.
Thanks in Advance....Hi Senthil,
There is a transaction code for link the message type to the idoc type using the T.code we82.
There we can assign the our own message type and Idoctype (basic type) we can assign. If u want to extension the basic type we have the option and we must release it.
********rewords some points if it is helpful.
Rgds,
P.Naganjana Reddy -
Creating message type in XI with imported objects
Hi,
I have imported an Idoc Structure into XI.
Now I need to create a message type with structure from imported Idoc + some additional fields.
Can some one tell me how to go about this. Because once I drag and drop the imported Idoc structure, I doesn't allow me to add any more fields during message type creation.
Is there a different to way to achieve this.
Best Regards,
KiranHi Kiran,
the Integration Builder supports two ways of modelling an interface. The first way is to build the required datatypes from scratch (with the datatype editor) then define (fault) message types using these datatypes and finally define the message interface.
The second way is to use an externally defined structure by importing an IDoc or RFC from an R/3 or an external DTD/XSD/WSDL from filesystem. Then define your Message Interface using the messages from the imported objects.
Currently there is nearly no support for mixing these two approaches as you have in mind (taking an externally defined structure as starting point, then enhance this structure within the Integration Builder).
The best workaround I can suggest to you, is import the IDoc, take the XSD which is displayed for it, download it to your local file system, edit it there (with notepad when you are an XSD expert, with some other tool like XML Spy otherwise) and upload the modified file as External Definition.
BTW: For this procedure you do not necessarily need to upload the IDoc to the Repository. As far as I know the R/3 also offers the possibility to generate an XSD representation for an IDoc (do not remember the exact way to go there).
Greetings Stephan -
Ale with user created message type
Hello,
I have a created a segment ,idoc and message type and done the assignment of Idoc with message type also.
i have to send the material 800 to 810 client through ALE.
By using the Standard Message type MATMAS i m getting the material on 810 client.
But when i am using my message type ie ZMAT_MSG in tcode BD10 on client 800 to send the material it is saying error that message type does not exist.
I am not getting the problem
Or it is not possible to use your message type to send the material through Tcode BD10.You have to always use the standard message type MATMAS.
If yes then how to use our own message type to transfer the data from client 800 to 810.
Please reply .
ManishHi Vasu,
Please try this.
1. Create distribution model (BD64) for message type MATMAS_BAPI.
2. Create inbound partner profile (WE20) for message type MATMAS_BAPI and IDoc type MATMAS_BAPI01 and process code BAPI.
3. Create IDoc ports (WE21)
4. Setup RFC destination (SM59).
Hope this will help to start with.
Regards,
Ferry Lianto
Please reward points if helpful. -
Transaction/Program to create message type LIP076 Idocs
Hi Idoc Experts,
Can you please let me know the T-code/program to send MD61(weekly forecast) data thru the idocs.
FYI- I am planning to use message type LIP076 with basic type SOPGEN01
Example: BD14 T-code to send the Vendor master details thru idoc.
I am looking for a similiar transaction/program, so that it will create LIP076 idocs with MD61 details.
Thankyou,
RaviHello Ravindran
You can also check the documentation in the below path and when you execute it it takes you to transaction SXDA. I am not authorized in my system, may be you can check more detailed in your system about the transaction..
SPRO -- > IMG --> Production --> Production planning --> Demand management --> tools --> Data transfer workbench: planned independent requirements.
Regards,
Thanga -
Http 403 when creating message type
Hi,
I have a bpel process that invokes a secure web service (https://....?wsdl). To be able to create the partner link and execute the process, I had to copy the certificate in two directories and import the certificate in jdeveloper and soa suite.
So, now I'm able to invoke the secure web service. The problem appears when I want to create a new Message Type using the secure web service. I try to choose the ws types and this error appears: "Error reading message parts! HTTP connection error code is 403"
I tried creating my own schema but when using xpath expression there are problems with the namespaces. So I would need to create the variable using the original wsdl.
Does anybody know what is happening? How can I solve this issue?
Thanks in advance,
ZaloaInstalled tamper data and from what I can tell, the requests go back and forth between AM server and protected resource. Here's the Request Graph output.
http://iamsys06.iamtest.com:8080/ 302 103
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 16
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 200 16
http://iamsys05:9080/favicon.ico 404 50
http://iamsys05:9080/.../Login?AMAuthCookie=AQIC5wM2LY4Sfcz... 302 183
http://iamsys06.iamtest.com:8080/ 302 30
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10711
http://iamsys06.iamtest.com:8080/ 302 23
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 15
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 16
http://iamsys06.iamtest.com:8080/ 302 18
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 13
http://iamsys06.iamtest.com:8080/ 302 13
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10
http://iamsys06.iamtest.com:8080/ 302 16
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 11
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
http://iamsys06.iamtest.com:8080/ 302 12
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
http://iamsys06.iamtest.com:8080/ 302 12
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
| | | | |
URI Status Duration 20:59:52.542 20:59:56.512 21:00:00.482 21:00:04.451 21:00:08.421 -
PLZ TELL ME THE USE OF CREATING THE MESSAGE TYPES AND MESSAGE INTERFACERS?
Hi DHANUNJAY,
Message type: message type is the structure which holds our message at runtime. you declare the data type first for which you create a message type.
Message Interface: It can be of Outbound/Inbound/Abstract type and of Synchronous/Asynchronous mode.
message interface holds the message type. in the message interface level you can define the interface for source side(outbound) or target side(inbound).
The communication in XI is done in the Message Interface level(which is the Outer most level of communication).
Please reward.
Regards
Sankar -
How I can identify the various message types that are been plugged in an IDOC Type? What will be the Transaction Used to identify that? I used the Transaction WE30, but I see the various segments that are been attached to the IDOC type and Not at the Message Type level. I used the IDOC type ORDERS02.
SAP uses a single IDOC type for several logically related messages. For example, the Orders IDOC type (ORDERS02) is used for several messages, such as Order (ORDERS), Order Response (ORDRSP), and Order Change (ORDCHG).
Create Message Type WE81
Create IDOC Type WE30
Assign Message Type to IDOC Type WE82
Can some one please help me? Appreciated.
,JYou can check this in the table EDIMSG.
Alternatively you can check this in WE82 as well:
WE82 --> Menu func. 'Selection' --> By Contents --> Select "By Contents" --> I/P your basic type & select "choose"
This will give you the list of the basic types associated with the message types.
Edited by: Suhas Saha on Jun 23, 2010 6:40 PM -
How to drop an IDOC and stop message type to trigger ?
Hey Guys,
I am creating oubound IDOC for sales order confirmation. Based on storage location values I have to restrict line items which should go in IDOC. I am using program ZXVEDU02 to write the code and achieve this.
The problem is that based on the logic and conditions when there are no line items are to be sent in sales order to particular partner, I have to drop IDOC itself. How to do this? please help.
If in the above program, I write delete int_edidd, the sales order is not getting created with update termination message coming in user inbox.
I wanted to stop the trigerring of message type also.
any inputs on this will be appricated.
Thanks and Regards,
Vishwanath Purohithi go to the tcode...
1) Create Segment ( WE31)
2) Create Idoc Type ( WE30)
3) Create Message Type ( WE81)
4) Assign Idoc Type to Message Type ( WE82)
Tcode- we19 is for testing idoc
in the we42 the message type and the idoc function module is ataached by the process code..
this is a best example to understand the creation of idocs(z)..
http://www.****************/Tutorials/ALE/CustomIDOC/Create.htm -
How to chang the idoc message type
Hi,
I want to change the idoc message type...because the idoc has the status 51...pls advice how to change
I have tried it from we81 .......but i cant open the msg type ...when i double click on it.
Regards,
SomenathHi,
This may help u
Steps To Create Custom IDOC
1.Create Segment Type (WE31)
Go to Transaction code WE31
Enter Segment type, click on Create
Give Description
Enter the Necessary Fields & Data Elements for those Fields.
Save the Changes.
2.Create Idoc Type (WE30)
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
3.Create Message Type (WE81)
Go to transaction code WE81
Change the details from Display mode to Change modenAfter selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press EnternClick New Entries to create new Message Type
Fill details
Save it and go back
4.Assign Idoc Type to Message Type (WE82)
Go to transaction code WE82
Change the details from Display mode to Change moden After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Regards
Seshagiri -
Hi, All
I need to create a message type, Enter the fields change pointers eligible for key changer in this message type. Extract program needs to be created and this program accesses the key changer fields status and the changed values on day to day basis for the message type using tables BDCPS & BDCPV.
Can any one tell me how to do this.
Many Thanks.Hello siri
I think if you talking with respect to ALE/IDOC or EDI/IDOC..........this posting has to be entered in data transfer.........................and you can create message type using trasaction we81.
Vj -
Hi Friends,
I am new to Xi . anybody pls help me
I want to know the Purpose of Message type in XI..cann't we directly use the data type in message Interface ? w/o message type what will happen ?
Thanks & Regards,
Laxmi.Hi,
In XI, we always create Data Type first and using Data type we create message type.
We can reuse this data type to create integrate into another data type also.
Using data type we cannot create any other object in XI except message type.
Whenever we need to create message interface, message mapping, interface mapping, we always use message type.
So Message type is need to be created from Data type. To transfer data XI uses message type.
Regards,
Manisha
Maybe you are looking for
-
How to get patch type (Security, Recommended, Generic) from a script?
All- If you run updatemanager on Solaris 10, it has a column for patch "Type", and includes Security, Recommended, Generic, etc. I would like to be able to have an automated process notify me whenever there are new patches released in either the Secu
-
HT1879 how to buy multiple songs for one person & pay for all at once
i want to purchase a bunch of singles for one person, & pay for all at once. is that possible?
-
Unwanted paths showing after cropping to make a repeat pattern tile.
I'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers below. This is what I did after creating the artwork: Used the rectangle tool to make a box
-
Problem triying to finding BAPIs in SAP CRM 2007
Hi Gurus, Does anybody knows how could I finf a BAPI at the new version of SAP CRM? I need to consume this data in a web,(via web service), but at the moment I can´t find it. It's seems that the BAPI Explorer at the new version doesn't work as the ol
-
Multiple downloads of same album.
Twice now, when I am downloading a album I bought off itunes it downloads 3 or more copies of the same album. This has happened twice now with music I ordered in advance of release. Anyone else have this problem? I don't really mind having to dele