Why do we deactivate the extract structure while doing extraction

Hi experts please let me know
why do u deactivate the extract structure while doing extraction

Hi,
We will never deactivate the extract structure while doing extraction.
When we try to appends some new fields to the extract structure, then automatically it gets deactivated. After we append the fields, we have to activate extract structure and data source.
Finally, the DS has to be replicated in BW.
Regards,
Suman

Similar Messages

  • Why do I get the colored pinwheel while working on yahoo and I cannot log off normal?

    Why do I get the colored pinwheel while working on yahoo and I cannot log off normal?

    Don't know. 
    What type of "work" are you doing on Yahoo?  Please describe in detail all you have attempted to do in order to resolve the issue.
    Troubleshoot the spinning beach ball

  • What is the source file structure while doing the BDC of mm01

    What is the source file structure while doing the BDC of mm01

    Hi,
    first u create a meterial note the data u enterd in the screens.
    if u have created the material successfully then that data structure will be the source structure of the
    file.
    regards.
    Jagadeesh.

  • Is there any limitation in xtract structure,while doing enhancement.

    is there any limitation in xtract structure, while doing enhancement.

    Hello Satish
    There is no limitation as such defined by SAP but let me teel you one thing, if your extract structure contains a lot of enhancement than it s better you go for using two extractor and then use Multiprovider for viewing all the data....basically when you enhance structure you customer exits which slower down the performence....
    For example you have 0FI_GL_4 extructure and want to see the payment detail by some SD attributes like sales office divisoion..bla bla bla...if small enhancement is there you can include these field in 0FI_GL_4 extract structure but if it is significant than you should create another extractor for getting SD related data and merge them in BW side in Multiprovider
    Thanks
    Tripple k

  • How to Hide/show the columns data while doing Drill down or drill up

    Hi ,
    How to Hide/show the columns data while doing Drill down or drill up in webi report .
    Does it possible BO 3.1 version ?
    Please suggest me on this.
    Thanks & Regards
    Venkat

    While that is not there yet, you can make use of the show when empty yes/no in combination with alerters.
    So I have an alerter applied to every cell of the table.
    When a condition is true (say I drilled down) I just put = "" in every cell, emptying the table,
    because its now empty and doesn't need to show, it wont.
    For the detail table I use the opposite, so when you drilled down it becomes visible...
    Hope this helps all that do not have 40 yet
    Good luck,
    Marianne

  • Difference between the different structures while dealing with User-Exits

    While dealing with User-Exits, we come across the different structures/Tables like XVBAP,YVBAP,TVBAP,IVBAP,*VBAP....
    What is the difference between them ?

    Usually X<tablename> and Y<tablename> are used in change document management to determine records updated (Y is old values and X new ones).  (Look at transaction SCDO)
    T<tablename is an internal table read from database and I<tablename> is an import table parameter of the same structure. <tablename> is an equivalent of <tablename> declared with statement TABLES and contains usually the "old" value.
    Look at exit documentation. start at [User Exits In Sales Document Processing|http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm]
    Regards

  • Error : complete allocation structure while doing Ko88 settlement.

    Message no. KD503
    Diagnosis
    During settlement, the system puts the sender debits into groups (assignments), which are settled using the same settlement cost element. The settlement assignment is made in the allocation structure, which is stored in the settlement rule for the sender (under settlement parameters).
    Cost element S10100 cannot be assigned to a settlement cost assignment in allocation structure A2, and therefore it cannot be assigned to a settlement cost element.
    Procedure
    Possible solutions are as follows:
    If the posting under cost element S10100 was made to the sender because of an incorrect entry, and you can reverse the posting, and do not need to update the allocation structure. You only need to reverse the incorrectly assigned posting before repeating the settlement. Exception: For an investment measure with a line item settlement, you need to extend the allocation structure, even after the reversal.
    If the posting was made correctly, you can do the following:
    a) You can assign a different allocation structure to the sender: In the master data maintenance for the sender, choose "Settlement rule -> Goto -> Settlement parameters" and then enter a different allocation structure.
    If necessary, also check whether the correct allocation structure is entered in the settlement profile. The allocation structure is defaulted in the settlement profile when you create sender master data or when you maintain the settlement rule.
    You can update allocation structure A2

    Dear,
    Please refer my reply in this thread,
    Error in Rework order settlement
    Regards,
    R.Brahmankar

  • What is the functionality for while doing MIRO

    Helllo sap guru
    Please give me idea about while doing in miro .what  is the functionanality for SUB SEQUENT DEBIT & SUBSEQUENT CREDIT .
    PLEASE ITS VERY URGENT FOR THE ABOVE QUESTION.
    THANKS & REGRDS
    TEJA

    Subsequent Credit:
    If vendor charges more in an invoice we can subsequently recover the same through a credit memo in MIRO
    Subsequent Debit:
    If we need to pay extra we can do through subsequent debit through a debit memo in MIRO.
    Revert for queries.
    Assign points if useful
    Rgds,
    Harmees

  • Why do we change the user group when doing LSMW?

    Hi experts,
    I just wanted to know why do we change the user group Tcode SU3 when we are doing upload of data using LSMW?
    Thanks,
    JEss.

    As Rajesh suggested if you are uploading data for action in which infotype group is based on User Group then you need to change User group.
    Otherwise there is no need to change user group for using LSMW.
    Rgds,
    Lata

  • I activated the voice over and now can not deactivate the voice response, phone does not scroll down keeps reading

    i activated the voiceover feature and now i can not deactivate the feature.  from general it keeps going reading and does not scroll

    Turn it off using iTunes, as described here: http://support.apple.com/kb/HT3577.  If your colors are inverted, also go to Settings>General>Accessibility and turn Invert Colors to Off.

  • Why TEXT is not transfering from SD(while doing billing) to Fi ?

    Hi Experts,
    While doing billing of sales order in SD side,they are entering "text" manually?the same thing is not transfering to the accounting document which generated while billing?
    What may be the reason??plz guide.
    Regards,
    Sumeya.

    Dear Fernando,
    i dont think so,user exit is required to solve this problem.
    Actually the "TEXT" was transfering before 31.12.2008 .only the test is not transfering from 1st Jan 2009 to 30th jan 2009.
    While debuging the standard programme,the error massage shows,
    "Fiscal year varient not defined for the year 2009"
    How can it possible??i already defined the fiscal varient V3(april to march with 4 sp.periods) and assigned to co.code.
    If anybody have any idea,plz share with me.
    Regards,
    Sumeya
    Edited by: sumeya offrin on Feb 4, 2009 12:55 PM

  • Disabling the auto rotation while doing OCR

    how can i disable the auto rotation function while doing OCR?

    It does this to improve the OCR but if you can choose Searchable Image (Exact) under the PDF Output Style in the Recognize Text - General Settings dialog it won't deskew the image.

  • How to suppress the Warning messages while doing GR(MIGO)

    Hi ALL,
    I have a requirement while posting goods GR/GI using T-code MIGO.
    Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
    'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
    How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
    Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
    I do want to issue the goods by suppressing warning message in this case also.
    I know this could be solved by customization but we are dealing with batch managed materials.
    How to suppress the the above warning messages in MIGO through ABAP coding ...
    Looking forward the helpfull answer.
    Regards,
    venky

    Hi
    Answer is pure assumption.
    Pls check the following OSS notes
    Note 319094 - Warning message during batch classification in IM
    Note 122937 - UD: Error message M7207 when you save
    Note 399416 - Message M7207 not analyzed in background
    Note 786755 - You cannot suppress message M7 207
    Note 201196 - MIGO: Error M7207 for goods receipt for batch
    Pls take opinion from SAP / Basis before implementing the OSS note
    Regards
    Madhan D

  • System is not recording the Service details while doing recording of ML81N

    Dear PP experts,
    Please help me on this.I am doing the recording of transaction ML81N through SHDB but system is not capturing the fields of formula variables while maintaining the service details only. else everything it is capturing.. please suggest me what to do.
    Thanks & Regards
    Nitin Kapoor

    Expert please respond to the query.

  • Getting the Failed status while doing the Play Back in oats

    Hi,
    i have recorded the script using the oats load testing with web/http.The script recorded succesfully without any errors .. but playing back the scirpt the overall result is displaying as failed.
    the errors are ...
    Variable "web.jscript.httpwwwgooglecom_88" not found for string: {{web.jscript.httpwwwgooglecom_88,aA12TaixLsnIrQem_5TMBQ}}12995821717263
    Failed to solve JavaScript variable web.jscript.httpwwwgooglecom_61:1:25:0:0.

    It's trying to extract a dynamic value from a javascript block, but it cannot find it. You could try turning off javascript correlation and then re-recording. To turn off this correlation go to Tools -> OpenScript Preferences -> HTTP -> Web Dom Correlation -> Edit -> de-select JavaScript -> OK.
    Regards,
    Jamie

Maybe you are looking for

  • ISync syncs to wrong Address Book group

    When I sync my phone (Nokia 3230) with my MacBook, I designate the Address Book group titled "Contacts in 3230" to be synced. But contacts that I've added to the phone (my usual way of adding new contacts) are transferred to my "All" contacts in Addr

  • How can I delete the first page in a document?  It is blank and pagination is grayed out.

    A PDF form is opened in LiveCycle 8.2 and there is a blank page in the beginning of it, then the form data for the document I need. I have tried numerous ways to delete this page, with no luck.  I have read through these forums and google searched, n

  • How can I fix my iPod when Every time I watch a movie it pauses.

    When ever I try to watch Percy Jackson the lightning theft on my iPod that I bought from iTunes it always pauses every 10-30 seconds.

  • Airport outgoing ethernet cable

    Hi there, I'm thinking of buying the AirPort express, but there is one thing I would like to know. Is it possible to plug an ethernet cable in to get the AirPort connected, and then let another ethernet cable go out to still keep my MacBook connected

  • Update not commit in a function

    Hi, I created a function that does an update. The SQL statement works fine on its own. But when I put this SQL statement in a function and used a .NET application to call this function, it didn't update the record. I even put the commit statement aft