Why do we get "Failure to initialize dynamic link library nipalu.dll"?

We have two laptops connected by Ethernet. Each sees the other as a normal drive.
Laptop A has the NI DAQ drivers and Visual C++ installed. It is our development environment. Laptop B has the PCMCIA DAQCard 6533 installed in the PCMCIA port.
The DAQ application is stored on Laptop A, but launched, via shortcut, on laptop B. The application launches fine on laptop A (but this is of no use, obviously).
I have tried installing the NI-DAQ drivers on Laptop B, but I get the same problem...
Failure to initialize dynamic link library nipalu.dll
THANKS!

Azucena,
Thank you for your comments. Three questions come to mind:
1)If I must install NI-DAQ (do you mean just the dll or the entire environment?) on both machines, what are the licensing issues? Note that I only use one for development.
2)Why do you say NI-DAQ needs to be installed on both machines? I launch my application on my remote machine using a shortcut pointing to the application where it resides on the _development_ machine. My app should therefore be able to see all required files (dlls, etc.) on the development machine even though it is running on the remote machine. To the remote machine the development machine merely looks like a normal drive.
3) I don't see how the patch can help; Since I'm running my app on the remote
machine (which doesn't have Visual C++ installed) it won't see any Visuall C++ modules in memory because they reside in memory (when they're there) on the development machine. Plus, when I do run this app on the development machine, it runs fine!
Thanks very much!
Les

Similar Messages

Dynamic Link Library NIPALU.dll

I am trying to load a VI developed test a circuit board i get the following error:
The dynamic likn library NIPALU.dll could not
be found in the specified path...
I have not been able to find the file anywhere online. How do resolve this problem.

I am not sure what you are trying to do, but it sounds like you are trying to acquire data. If you are using one of National Instruments examples in LabVIEW and you are getting this error, I would recommend reinstalling your NI-DAQ driver. After reinstalling the driver, check in MAX to make sure the device is working correctly and that it passes the Test Resources in the device properties.
I hope this helps out,
Joshua

The procedure entry point _palLogEvent could not be located in the dynamic link library NIPALU.dll

Good Day to all,
I have recently tried to do a emergency repair for my workstation.
It was running on Windows 2000 and I have to replace the system within C:\WINNT\System32\Config\
After that whenever I tried to run my program, it will give me an error message 'THe procedure entry point _palLogEvent could not be located in the dynamic link lbrary NIPALU.DLL'
Can anyone help?
I have re-installed my program and the drivers for my PCI-6023E.
I am running out of ideas.
Thank you in advance.

Hi,
Thanks for your posting.
According to my search, you can't install VS2012 on the Windows 2003 machine.
Meanwhile, for this issue, i think you should ask in VS forums:
http://forums.asp.net/1213.aspx/1?Visual+Studio+and+Visual+Web+Developer+Express
Regards.
Vivian Wang

Why is it that every udate of my iPhone software do I get the error message on my laptop: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll

Each time I update the software on my iPhone4 I get the following error message on my lap top: AppleSyncNotifier.exe - Entry Point Not Found The procedure enrty point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll
I go on line to find a solution, but it must be a common problem, why has apple not corrected yet?

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

Getting Error-- "The procedure entry point _UP_GetActiveTreeCell could not be located in the dynamic link library cvirte.dll" on host machine.

I am trying to build an executible program that will be portable to machines which do not have CVI installed. It works fine on my CVI v9.1 system. However, whether or not I include "Full run-time support" in the build options, I get the error "The procedure entry point _UP_GetActiveTreeCell could not be located in the dynamic link library cvirte.dll" when I try to run it on a machine without CVI. Please help.

To run a CVI application on a system were the CVI IDE is not installed you need to have the CVI RunTime Engine installed. According to the error message at the bottom of this page you may have an older RTE installed in the target system.
To obtain it you can either download the RTE and install in the target system or better let the IDE build a distribution disk that installs all necessary software in it: this guide drives you in creating the appropriate installer for your application: you can find it also in CVI help function.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Tried to update iTunes, after downloading I get the message: procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ??

Tried to update iTunes. After downloading I get this message: Procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQLite3.dll ?? What does that mean?!

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

HT203175 Why won't iTunes install properly? It gives the start up error "The procedure entry point JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll"

I can't get iTunes to install/start on my HP laptop. When I start/install the current version, I get the following error "The procedure entry point "JSStringGetUTF8String could not be located in the dynamic link library WebKit.dll". Why isn't this dll included in the distribution? What do I do to get iTunes to install on my 64-bit AMD HP laptop.

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

SAPJCo problem -- Could not initialize dynamic link library sapjcorfc

Hi there,
I have a J2EE application running on Websphere Application Server ND V6.1 (on MS Windows Server, Enterprise Edition with
SP2). J2EE application need to communicate to SAP on P560 z/OS via SAP Java Connector (SAP JCo). As per instructions given by
SAP JCo, I have created a folder and extracted SAPJCo zip to that, and also copied librfc32.dll & sapjcorfc.dll to
C:\Windows\system32 folder and created the shared libraries at the Application server level on Websphere to point to the
sapjco.jar file.
Now when I start my J2EE Application on Webpshere, I get hte error which is under the dashed line. The main complaint is.....
<b>java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer
'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [D:\Software\SAPJCo\sapjcorfc.dll (JVMPORT015E Unable
to resolve DLL references - a prerequisite DLL may be missing)].</b>
Please let me know if any one has experienced similar problems. As we have a milestone to present this in a very short time,
I appreciate if any one could help me out as soon as possible.
==========================================================================================================================
Cannot resolve reference to bean 'sapConnector' while setting bean property 'sapConnector'; nested exception is
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'sapConnector' defined in class path
resource [sapInterfaceContext.xml]: Instantiation of bean failed; nested exception is
org.springframework.beans.BeanInstantiationException: Could not instantiate bean class
[au.com.allianz.fsi.journal.sap.SapConnector]: Constructor threw exception; nested exception is
java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer
'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [D:\Software\SAPJCo\sapjcorfc.dll (JVMPORT015E Unable
to resolve DLL references - a prerequisite DLL may be missing)]. java.library.path
[D:\WebSphere61\AppServer\java\jre\bin;.;D:\WebSphere61\AppServer\bin;D:\WebSphere61\AppServer\java\bin;D:\WebSphere61\AppSer
ver\java\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\Software\SAPJCo;D:\WebSphere61\AppServer\lib\WMQ\
java\lib]
     at
org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
     at
org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.jav
a:109)
     at
org.springframework.beans.factory.support.ConstructorResolver.resolveConstructorArguments(ConstructorResolver.java:381)
     at org.springframework.beans.factory.support.ConstructorResolver.autowireConstructor(ConstructorResolver.java:120)
     at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.autowireConstructor(AbstractAutowireCapableBeanF
actory.java:781)
     at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFa
ctory.java:699)
     at
org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.ja
va:386)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:255)
     at
org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:156)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:252)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
     at
org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java
:287)
     at
org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.jav
a:689)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:358)
     at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:244)
     at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:187)
     at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:49)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.notifyServletContextCreated(WebApp.java:635)
     at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:279)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:283)
     at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:88)
     at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:655)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:608)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1312)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:1129)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:814)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:965)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.java:2131)
     at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.java:341)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Regards
Satish

Hi,
The following error is id due to the following cause :
Exception: Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' default_cpc_mode at com.sap.mw.jco.JCO.<clinit>(JCO.java:309)
Exception: Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [C:devcu rrjcosapjcorfc.dll]. Required version "2.1.5 (2005-02-15)". at com.sap.mw.jco.JCO.<clinit>(JCO.java:735)
Exception: Exception in thread "main" java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC' JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc. Found version "2.0.11 (2005-01-21)" but required version "2.1.5 (2005-02-15)". at com.sap.mw.jco.JCO.<clinit>(JCO.java:735)
Cause: These exceptions typically occur when different versions of sapjcorfc.dll and sapjco.jar have been installed. Anytime the JCo connector is upgraded to a new version, you need to ensure that all three libraries are updated (librfc32.dll, sapjcorfc.dll, and sapjco.jar). If any are left at the older version, one of the above exceptions is likely to occur.
Resolution: Extract sapjcorfc.dll and sapjco.jar from the original JCo archive. Copy these files to the appropriate locations, overwriting the originally installed versions. Ensure that the PATH statement is updated to reflect the directory location of the DLL files and the Java CLASSPATH points to sapjco.jar.
U can use the following link to solve any problem associating JCO :
http://searchsap.techtarget.com/general/0,295582,sid21_gci1096472,00.html
Please reward with points if the answer is helpful.
Thanks
ritu

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
Michelle

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

Please help

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

When I boot my computer i get a message that says The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll.

When I start up my laptop I get an error message that says 'The Procedure entry point_NSConcreteStackBlock could not be located in the dynamic link library CoreFoundation.dll. I have tried to uninstall itunes and all its files, I have tried to install safari, i have tried to repair Apple application support but still when I boot laptop, I get the message....I am at a loss as to what will cure this!

You should have one copy of CoreFoundation.dll in C:\Program Files\Common Files\Apple Application Support or C:\Program Files (x68)\Common Files\Apple Application Support if this is a 64-bit Windows.
The detailed file properties should be as shown.
If the file you have is correct check to see if there is another copy in the main iTunes folder. If so delete it and see if that helps.
Otherwise try uninstalling/deleting folders/reinstalling iTunes again. See Troubleshooting issues with iTunes for Windows updates for more details. Your issue looks a bit like it might be a variation of the issue in the first box.
Also worth checking that you have uninstalled the MobileMe control panel and any third party software that might try to talk to iTunes.
tt2

My problem is on my Windows PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help?

I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

Why do we get "Failure to initialize dynamic link library nipalu.dll"?

Similar Messages

Maybe you are looking for