Why do we have Single Hop between Ipsec Peers?

Why do we have Single Hop between Ipsec Peers?
What is the concept behind this?
Physically the data is transmitted through various routers or hop reaching the destination peer
But while tracing we can see only 1 hop
Why it so?
Regards,
Kesavamurthy Palani

Thanks !! Jon
I got it!
Other Question :
Still the packets leaving VPN1 after IPsec encapsulation will pass through R1->R2-->R3
here.
So basically if we use tunnel - virtually the data is transmitting with single hop but IPsec Packets will go Physically to all routers-with fragmentation and Reassembly due to MTU of the medium along the path,
But trace doesn't show this - as it is encapsulated inside the IPsec Packet
Am i right?
Regards,
Kesavamurthy Palani

Similar Messages

Why can I have a difference between Transferred Records and Added Records

Hello gurus,
What could be the reason for the difference between the Transferred records and the added records in the request for an InfoObjects?
I have in RSA3 6452 Records and in the Manage-InfoObject 1002 Records.
thanks for your help

- already existing master data (changed but not new)
- start routine with deletion
- duplicate records (with error handling activated)
- end routine

Why do we have to choose between wifi calling and continuity?

I live in a low spot, so signal doesn't make it into my house great from my current provider. I'm looking to buy an iPhone 6 switch to T-Mobile because WiFi calling was touted in the iPhone 6 release as this great new feature. But I have also been looking forward to being able to answer calls on my iPad Air, and my wife on her Macbook Air. In fact, we bought the Macbook Air and my wife's iPhone 5S partially because this feature was touted at the announcement of the new features in iOS 8 and Yosemite this summer. Now I'm finding out that we are being forced to choose one of these great features; we cannot have both active. So in my home where signal strength is a problem, I can use WiFi calling, but not continuity. Is this something that will be allowed in a future update? It's extremely frustrating to find out that you can't take advantage of all the features you were told would work on your new $800 device.

When I first joined att I got a brand new $500 phone for $200 just for signing a 2 year agreement. This was a pretty good deal in my opinion. Then t mobile started their cheaper bills but you have to pay full price for a phone thing. They decided to let people make payments to help out a bit. This was also a pretty good deal seeing as how your bill would be that much lower. Now att has the same expensive plans but decided to add t mobiles idea of making us pay the full price of the phone. Oh but we get to make payments so I guess it's okay.
So instead of paying $200 now, we get to pay $600 over 30 months. The worst part is that people seem to love this idea. I haven't heard one person complain about it. Are people that dumb that they actually think this is a better deal? If you wanted to make payments, you'd be better off putting $200 on a credit card and paying the interest for 30 months then paying the full price of the phone.

Why do I have to wait between calls?

I'll try to explain myself.
After making or receiving a call and hanging up I have to wait a minute or so before making another call. If I try to make the call immediately after I hang up the previous call, the call does not go through (the screen does back to the home screen showing 'call ended'). This problem sometimes goes away after restarting the iPhone. Has anyone else had this problem? Is this a hardware issue?
My phone is an iPhone 5 32GB with less than one month of use.

It goes away after a reset, but unfortunately the problem comes back. Have not tried a Restore... What would be the proper way to restore? Should I restore from backup or do I have to add all apps one by one, add email accounts, etc.?

How can I keep every single photo from saving to "collections""my photo stream""camera role" and just use one folder? And why do I have to delete the same pictures 4 times? In "collections""myphotostream"camera role""deleted photos" I need ONE FOLDER

im sick of deleting the same picture 4 separate times, I want to limit everything to one folder and only have to delete one time, how? Why does this have to be so complicated

Photos you take on your camera are in the Camera Roll and are like the film in a camera.
Photo Stream is an independent stream of photos from all devices that are logged onto the same iCloud account and that have Photo Stream turned on. Photo Stream photos are kept in the cloud for 30 days or up to 1000 photos, whichever comes first, so unless you have a particular photo you just don't want to stay out there for 30 days, you don't really need to delete Photo Stream Photos. They are temporary. Your device will continue to keep your Photo Stream photos from prior to the 30 day limit, but if you switch Photo Stream off in iCloud and then right back on, the only photos that will re-display in Photo Stream on that device are the ones that remain within the 30 Day/1000 photo parameter.
Collections is simply a single place which shows all of the photos that you have on your device. You do not need to delete photos from Collections. It is just a single place where you can see the contents of all of your albums.
Photos in albums that you have created on the device itself are tied to the photos in your Camera Roll, so if you delete them from the Camera Roll, it will tell you that it will also be deleted from an album.
Albums that you have sync'd from your computer should be removed the same way you got them there - by hooking the device up to a the computer you did the sync with, and un-selecting the album from the Photo profile screen.
So, really, there are only two places that you need to delete photos - Camera Roll and Photo Stream.
Cheers,
GB

Please Help! I have been writing using - Pages - app for years. I still can not figure out how to make single spaces between paragraphs. Pages automatically double spaces between paragraphs.

I have been writing on - Pages- app for several years. Pages automatically uses double space between paragraphs. I can not figure out how to make single space between paragraphs. Tried everything. Please help!

Pages User Guide > http://manuals.info.apple.com/en_US/Pages_UserGuide.pdf
Open the user guide then press Command + F on your keyboard.
Type line spacing in the search field top right corner of that window.

Okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

okay so i have been trying to contact apple for days now but i was just thinking why do we have to only choose between white or black for the digitizer? would i be able to send my ipod into apple to get it customized to a different color besides that?

Apple does not offer custom colors. I'd suggest you get a skin for your iPod. Those are available in hundreds of colors and patterns and since they're not permanent, they don't affect the iPod's warranty and you can change if you ever get tired of the skin you chose.
Regards.

Why did I have to enable Windows File Sharing to share files between two Mavericks iMacs?

File Sharing failed between my Mavericks iMacs. The console logs showed that the target iMac saw the ntlmv2 protocol as unknown to the kdc. I fixed it by enabling Windows File Sharing on the target Mavericks iMac. I had tried disabling SMB on both iMacs and leaving AFP on, but then nothing happened when I tried to connect. Why did I have to enable Windows File Sharing to share files between two Mavericks iMacs?

When you enable file sharing you need to have either SMB (Windows) or AFP (historically Apple-native) file sharing checked. The default in Mavericks is SMB, and not AFP.
If you uncheck both, then the system will turn off file sharing. Apple supports the use of both SMB and AFP connections in Mavericks, so with only AFP enabled you should have been able to establish a connection, but there could be a small bug or configuration-specific snafu that you're encountering.
With AFP enabled only, try pressing Command-K in the Finder to open the Connect To Server dialogue, and in here enter the address to the system using afp:// as the protocol, such as the following (the name can be looked up in the Sharing system preferences):
afp://my_imac.local

I'm trying to find out why my phone isn't here yet, 30+days, and I can't find a single contact number on this website. Why do I have to sign up with this stupid forum? I have better things to do, like find a new carrier!!

I'm trying to find out why my phone isn't here yet, 30+days, and I can't find a single contact number on this website. Why do I have to sign up with this stupid forum? I have better things to do, like find a new carrier!!

800-922-0204 option 4, say agent, ask.

Why do I have to keep restarting my MacBook when I'm switching between searches?

why do I have to keep restarting my MacBook when I'm switching between searches?

Sorry bear with me it's my first time using or posting to the community. I need to know if you are able to forward call to another iphone and use your Apple ID for facetime on a different phone. is this the reason for it being logged in call list as, " call answered by another device."

Why is it every single time i download something, it disapppears off of the download tool bar, and I have to maunally search for it?

Why is it every single time i download something, it disappears off of the download tool bar, and I have to manually search for it? And sometimes I still cant find it, even doing a detailed search.
== This happened ==
Every time Firefox opened
== Every since I have had it.

Tools > Options > Privacy > History: "Remember download history"
To see all the History and Cookie options, select: Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
See [[Options window - Privacy panel]]

Why do I have to remove VI from SubPanel?

LV 2013, Win7
I have a program where a menu item can open or close a particular window.
That window is large, contains 72 SubPanels, each SubPanel contains a single instance of a reentrant VI (called the BLOCK VI).
I have a LARGE memory leak (about 100 MBytes ) each time the window opens and closes. I'm using the Windows function WORKING SET SIZE to judge memory usage.
In chasing this, I have put a DIAGRAM DISABLE around the entite block diagram of the BLOCK VI. That means it cannot allocate anything in code.
The problem still exists.
I seem to have found the problem, but I don't understand why - it seems to contradict the HELP.
The HELP text for INSERT VI into a SubPanel says this:
I interpret that highlighted part as meaning when my Window VI stops, the VIs will be REMOVED automatically (They have been stopped before).
But that doesn't seem to be the case.
Here is the Memory usage before I discovered the removal angle. I Open and close the window 4 times:
If I REMOVE the VI myself, then here's what it looks like:
--- That's more like I would expect - whatever it uses when open, it gives back when closed.
I have verified it's a real problem - I have a stress test to cycle the open/close operation, and it eventually dies with a MEMORY FULL message.
So, here's the code:
There is a tab control with 12 pages on it. Each page has nothing but six SubPanels on it.
So, I collect those 72 SubPanel references.
For performance reasons, I pick out the page that is showing (set from the last time the user closed it), and launch the blocks for that page first.
I then bring up the window's front panel, and then launch the blocks that are not showing, so that they are ready to go if the user switches tabs.
Here is the LAUNCH BLOCKS code:
I convert the generic ref to a SubPanel Ref, open a CALL and COLLECT reference to the BLOCK VI, and insert the VI, then RUN the BLOCK VI instance.
No errors occur here.
When I CLOSE the window, here's what happens:
The instances of the BLOCK VI have already been told to quit (for this test, they are entirely disabled anyway, so do not run).
I WAIT ON ASYNCH CALL for each one (I don't really need to collect anything, but I need to wait on them quitting. I've been going back and forth between C&C and other methods of doing that.
It's that REMOVE VI part that I DISABLED and ENABLED to produce the mem usage graphs above. Originally I didn't have it, but I tried and it seems to solve the problem.
But why? The help says that I don't need it. After this code, the window VI quits, so they should be removed automatically.
But yet the memory piles up...
QUESTIONS:
1.. Why do I have to REMOVE the VI?
2... Does it matter if I RUN the VI before INSERTING, or INSERT before RUNNING?
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

CoastalMaineBird wrote:
The HELP text for INSERT VI into a SubPanel says this:
QUESTIONS:
1.. Why do I have to REMOVE the VI?
2... Does it matter if I RUN the VI before INSERTING, or INSERT before RUNNING?
I would say that the help is poorly phrased. It's quite easy to demonstrate that the when a VI stops running, the VIs in its subpanels are not removed automatically (see the example). I'm assuming that what was meant here is "until the VI that contains the SP goes idle or out of scope", which is not how most people would interpet "stop". As long as the VI stays in run mode, even if it's not actually running, the FP stays in the SP unless you remove it.
This is the behavior you're seeing and it explains the memory issues. Since you're not removing the FPs, they are apparently staying open, thus making your close ref a no-op, and since you then keep going, they're apparently staying open in the background. This is a guess. I haven't checked it, but it seems to match what you're describing.
And no, I don't think the order of the operations matters, but I would suggest running the VI before inserting, to avoid a case where you have a non-running VI visible.
Try to take over the world!
Attachments:
subpanel example.vit ‏33 KB

Why won't my emails update between my devices?

why won't my emails update between my devices?

That's not the issue though. I have all that already set up. It's just for my hotmail account. I have another account that works fine. It's just annoying to have to see all the same stupid emails on every single device, and then in my hotmail account as well. Aren't they supposed to be syncing with one another?

Why do I have "Unified Info" and plain "Info" categories in my iPhone Contacts?

I have an iPhone 3GS (iOS 5.0.1), an iMac (OS X v10.7.3) and an iCloud account. All are set to sync several things, but the topic of this inquiry is my Contacts. I've noticed that when I open any given Contact listing on my iPhone, each is headed by one of two lines: "Unified Info" or plain "Info." At the bottom of a "Unified Info" contact listing are two lines showing me "Linked Cards," one being for iCloud and the other for iPhone. On the one headed plain "Info" there are no Linked Cards showing at the bottom of the contact listing. As noted above, my system is set so that the Contacts in my iPhone, my iCloud account and my iMac (which is further set to keep both my and my wife's contacts sync'd, as well) all read the same. So why do I have these two "types" of entries on my iPhone? I should note that all the important information in all three places (iPhone, iMac and iCloud) - name, numbers, addresses, etc. - IS THE SAME, but why do they have diffefent headings on my iPhone!?! Any explanation from someone knowledgeable about this would be appreciated, and is there any way I can get - or should want to get - all the Contact entries on my iPhone to be "Unified Info" entries? Thanks, in advance, for any help you can offer.

I've got the same problem. Showed up after trying they 'sync google contacts' feature in Address Book/iTunes. Suddenly I have duplicates of all my Contacts. Address Book doesn't see any duplicates using the 'Find Duplicates...' feature. In Address Book I can only tell the difference between the duplicates by comparing the information in them. The new ones (presumably from Google) are missing fields like URL and birthday. On the iPhone, however, the names have these squares after them. These squares don't show up in Address Book (if they did it would make it much easier to delete them all).

Why do I have to conform?

I hope someone here can shed some light on my problem. I'm putting together an assemble edit for CG short that I'm help out on. We're in the process of locking each shot down to the exact frame count - which is where my problem comes in.
The animatics that i'm being given are at 60fps encoded in Cinepak. The final delivery of the project is going to be 720p at 30fps. Whilst we edit the shots I've been putting the 60fps animatics straight into a 30fps sequence and all was going swimmingly until we came to lock down the frame count for each shot.
When I import these animatics in my Bin in Final Cut Pro (I'm using 4.5), FCP seems to think these animatics are at 59.94fps. This is obviously an issue when doing a frame count.
I have one clip that is eactly 66 frames long (I've counted them in QuickTime just to check) but when I bring them on to a sequence at 60fps in FCP, I seem to loose 2 frames as it's only 64 frames long. I tried converting the movie to 30fps and putting it into a 30fps sequence, but when I import that movie FCP seems to think it's at 30.97fps and instead of it being 33 frames long it's 31 frames long.
The only way I can get FCP to recognise the animatic at a correct frame rate is to convert it to 30fps and then use Cinema Tools to conform the frame to 30fps. Then when I import it into my FCP project, it's correctly detected as 30fps and the frames are there.
If I overlay a conformed and unconformed version of this movie in FCP the action doesn't seem to move, I just loose the frames from the end of the shot.
So the questions I have are this...
Why do I have to conform a clip to 30fps when it already is at 30fps for FCP to correctly recognise it's frame rate when QuickTime and Compressor seem to recognise the unconformed version as 30fps just fine?
If I wanted to do a 60fps version how to I conform the framerate when Cinema Tools only can conform upto 30fps?
And finally, why can't FCP just recognise the framerate of a QuickTime movie?
I'm doing this all on a PowerMac G5 Dual 2.7Ghz with 2GB or RAM running Mac OS X 10.4.6.
thanks in advance
Andrew
PowerMac 500GHz G4 DP & PowerBook 1.25GHz G4 Mac OS X (10.4.5)

Hey David,
Thanks for your response, I know the workflow is a little unusual but so is the project.
The reason the animatics are at 60fps is that they are motion captured and that was done at 60fps as they will be later used in a video game. The CG short is essentially a movie using the game assets and as it's 720p, it's 30fps.
I would have probably gone for image sequences too, but I was working with different shots coming from multiple artists and they are using Maya on Windows which doesn't give you much choice output for the PlayBlasts (Animatics), it seem to like AVIs the best.
Being that there was multiple revisions of each shot a day, to keep the files manageable we choose to do the PlayBlasts as Cinepak AVIs.
The edit I was putting together was only ever going to be an assemble edit, so the final frame count for each shot could be determined and then the Maya scenes would be sent to a post house for rendering. The final short would be all the shots in order back to back.
Hopefully that explains the strange workflow, if you have any tips on improving it if I have to do it again - please let me know.
I guess the framerate quirks will really be one of those mysteries!

Why do we have Single Hop between Ipsec Peers?

Similar Messages

Maybe you are looking for