Why do we need to assign ip for the D channel ISDN-PRI
Why do we need to assign ip address to the D channel (signaling ) when we configure ISDN-PRI in the example below :
http://www.cisco.com/univercd/cc/td/doc/product/access/ap/ap_ts3/ap_ts3sw/apswisd.htm
<quote>
Step 1:Specify the D channel of the first Primary Rate Interface (PRI):
AS01(config)# interface Serial 0:23
AS01(config-if)#
Step 2: Assign an IP address and subnet mask to the interface:
AS01(config-if)# ip address 172.16.254.253
</quote>
Regards
You can assing one there, and / or on dialer interfaces. It depends on what you are doing.
These will be the address used by PPP when it runs on the B-channels.
Similar Messages
-
Why sender agreement need not to create for IDOC
Hi Experts,
why sender agreement need not to create for idocPlease check these related discussions:
Re: Question on sender agreement
Re: IDOC and HTTP Adapters - sender agreement ??
Re: ** Sender Agreement is required for RFC but not IDoc, XI, & HTTP.. Why ?
Many threads with the same Q are answered on SDN....so if you search you can find the correct answer that you need!
Regards,
Abhishek. -
Why do u need a custom structure for creating a custom bapi
Hi ,
why do u need a custom structure for creating a custom bapi.Hi,
Once any Bapi realeased the structures it is using freezed to this bapi, the structure becomes specific to this Bapi, we can not make any changes over there. That is why we need custom structure for creating a custom bapi. -
why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook
These are user-to-user forums, you are not talking to Apple here.
If it was an audiobook then they are one-time only downloads, to get it on your other devices you need to sync it to them and not re-download it oneach. You can try contacting iTunes support and see if they will refund or credit you for the second and third downloads : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Assign access for the database to None with maxl?
I need to assign access to the database to none with maxl. Any help will be appreciated. <img src="i/expressions/beer.gif" border="0">
Do you mean setting the minimum access permission on the database?<BR>For that the command is 'alter database 'Sample'.'Basic' set minimum permission no_access;'<BR><BR>If you want to prevent users from logging on to the database then use something like<BR>'alter application 'Sample' disable connects;'<BR><BR>HTH<BR>
-
Why does it sometimes take 30 seconds for the dock to come up after bringing the curser to the bottom of the page?
Try doing a Dock restart using the following Terminal command:
killall Dock
Log out/in and test. If that doesn't work.
You need to look in your user Library/Applications Support/Dock for the .db. Use the Finder “Go To Folder” command. Enter ~/ Library/Applications Support/Dock. Move the .db to your desktop.
Then try a dock reset.
Applications/Utilities/Terminal enter the command
killall Dock
Log out/in test. If it works okay, delete the .db from the desktop.
If the Dock is the same, return the .db to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible. -
I need a new Bios for the MSI k7n2 L!!!!!!!!
I need a new bios for the MSI k7n2 L, because i need more voltage for the MIcroprocesor and more voltage for the DDR.
Anybody know if exist some bios BETA or something,
And when MSI will release the New bios for this mother?
Thank for respond
Sory for my english
N7.net | SebaSI hope you find one...(doubtlfully tho)....alot of people would like to have what you asked for......
One question why do you feel you need more voltages?
Is the system unstable?..........or do you just want to overclock more? -
iTunes always quit with the error message "
itunes has encountered a problem and needs to close, sorry for the inconvience. " Uninstalled and re-installed many times, but the issue still persists.Generate another of those error messages and click the "Click here" link in the error message box. What modname and modver are showing for the error? (Precise spelling please.)
If the error is a BEX and thus doesn't show an modname or modver, let us know what P1 through P9 items are showing for you instead. -
I have an ipad3, iPhone3gs and iPhone5, my problem is my apple ID works all 3 devices but I need a second ID for the iPhone 5. How do I delete my ID and set up a new one for the iPhone5 but keeping my own apple ID for the iPad and iPhone 3GS.
http://support.apple.com/kb/he37
-
I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?
Of course You can also add your iPhone telephone # as a trusted device.
This way when you insert your SIM card into any phone, Apple will automatically recognize your cell phone # as a
trusted device (may be handy if iphone breaks but you insert SIM card into another phone).
HOWEVER:
Having also your iPhone as a trusted device, is convenient if you travel and use a different SIM card
at destination. This way you can still use the iphone for verification, even though you are using a different
phone #.
Regards -
Need best Architecture design for the following scenario
Hi Experts,
I need best architecture design for the following scenario:
Sender: Mail
Receiver: if sender body contain u201DApproveu201D, then call SOAP adapter, If SOAP adapter execute successfully, then send Mail(SOAP adapter executed successfully) and SMS . So receiver is SOAP, Mail and SMS.
My current approach issue:
Three message mapping:
Mapping1: mail to SOAP
Mapping2: mail to Mail
Mapping3: mail to SMS
In interface determinant>u201DSelect all three operation mappingu201D> u201Cselect order at runtimeu201D.
Issue in current approach: For me first SOAP adapter should complete successfully, after that only my Mail and SMS operation mapping should execute:
But problem is before success of SOAP adapter engine, Mail and SMS mapping completed or integration engine executed.
Note: There is possible to fail the SOAP request in adapter engine.
Kindly help me --> u201CAm I going correct way or want to change the architectureu201D?
Thanks for advance!!
Regards, KumarWhat do you mean by successful execution of soap call? Are you talking about Successful response (happy flow) from the soap call instead of application error ? Then based on the response you want to decide sending mail and sms. How big call is your soap ? If your soap interface is very simple I can give the other possible way.
Sender sends the message, use mapping to read the content and then do soap call in the mapping itself and after seeing the soap response decide about two receivers (mail and SMS). If your soap call is very simple one, you can go for it. Otherwise I would not recommend this. The reason is you loose some visibility regards to monitoring during soap call in the mapping.
Other option is go for CCBPM. Here you receive the message, use send step to soap interface which is sync step. Then after seeing the response create another block with fork steps each for two senders mail and sms. If response bad then dont proceed or execute the next block. Simply use exeception or control step to jump out from the block, -
Getting error log 'Customer' needs to be defined for the PA segment'
Hi guru,
i am posting automatic payment transaction (F110) ,but i am getting in display log that
I am unable to do the posting?
can somebody let me know any reason for this?
04/09/2010 12:57:54 Job started 00 516 S
04/09/2010 12:57:54 Step 001 started (program SAPF110S, variant &0000000089657, user ID X1SRAVKU) 00 550 S
04/09/2010 12:57:54 Log for payment run for payment on 01/22/2010, identification EIN5 FZ 401 S
04/09/2010 12:57:54 'Customer' needs to be defined for the PA segment ZF 019 S
04/09/2010 12:57:54 Information re. customer 1002215 / paying company code WG ... FZ 306 S
04/09/2010 12:57:54 ... payment not possible because of reported error FZ 311 S
04/09/2010 12:57:54 End of log FZ 398 S
04/09/2010 12:57:55 Job finished 00 517 SWe have user defined PA characteristics. If there is new characteristic we update the custom lists through KES1.
Lack of a match in this table, leads either to no description or the error you are describing.
good luck -
Do we need unique program ids for different SAP Channels
Hi All,
I am using different channels for receiving SalesOrder and Invoice idocs from SAP system. Wanted to confirm if we need unique program ids for each SAP channel or a single program id can be configured in SAP GUI to receive both idocs. I am using SOA 11g.
Regards
SubhankarUnique program id for each type of IDOC is preferred per each channel
IDOC Type 1->Programid1->Channel1
IDOC Type 2->Programid2->Channel2
Manoj -
I installed acrobat pro on my computer, and now I am unable to download items because I get a message that I need to open acrobat for the user agreement. opening acrobat pro does not help. What do i do?
I have not contacted Adobe. I am using acrobat pro CC, and haven't noticed any problem with the software itself. The only problem I have had so far is when I try to download.
-
Why do Orange and EE blame Apple for the delays in unlocking my iPhone. 10 months now. What is the exact process that these companies have to go through to unlock an iPhone and is Apple in any way to blame for the delays.
Indeed how long does Apple take to carry out its part of the process.
It seems to me that Orange are just trying to stall me despite the fact that I am out of contract with them now. I originally paid to have the phone unlocked back last November. This was never done.
I have phoned them numerous times over the last two months but still they haven't done it. Can anyone advise me and has anyone had similar problems with them.
ThanksI certainly understand that only Orange can unlock my phone. My annoyance is that they blame Apple so I am keen to know what exactly is Apple's involvement.
I presume that Orange have to tell Apple that the phone has been authorised for unlocking by Orange and that Apple then notes that in some way on iTunes so that the user can then complete the process on iTunes.
What I would like to know is how much time Apples part in this process takes.
I would also like to make contact with others who have had similar problems.
Many thanks
Maybe you are looking for
-
Looking for All-In-One Sudoku Game App for iPad?
Bare with me... I'm going to learn now if this is an appropriate question here and if not where to go that would be appropriate? I'm looking for a great iPad Sudoku game app that offers a variety of different format variations using numbers 1-9, dif
-
Post Author: lazarus CA Forum: Formula Just want to say that i'm glad this forum exists. Many a late night has been spend trawling the net for solutions to CR issues which ultimately never get resolved. Hopefully this lovely forum can get me and the
-
How does one set the option to pre-compile JSPs on deployment in WL 10.3?
Outside of manually creating and modifying weblogic.xml, that is. There used to be a tool Weblogic Builder that gave a graphical interface to modify weblogic.xml. Has this been replaced in 10.3 or just thrown away? Also, can I set the option at all i
-
A big problem about me and my cousin
i want to ask if my ipad is in IOS7.0.1 but my cousin is updata IOS7.1.1 already,so can we facetime eachother?
-
EAS stopped communication with Shared Services
All of a sudden my EAS seemed to have stoppped communicating with Shared Services. I can log into the EAS console, but cannot do the following: 1. I cannot open calculation scripts to edit them. 2. After I try to open one, it then logs me out complet