Why do we need to need Desktop Experience to get Disk Cleanup?

Why do we need to need Desktop Experience to get Disk Cleanup? What other options do we have?

Hi,
Disk Cleanup cannot be installed separately. This is part of desktop experience.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/2af659cb-51b2-4ca6-ba56-0a507979fe7d/disk-cleanup-cleanmgrexe-in-windows-2008-server-without-desktop-experience?forum=winserverManagement
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Similar Messages

I am going to buy a macbook pro for grade 12, and I need to know wheather I should get a macbook pro or a macbook pro retina. If someone could tell me (in a very simple way) which one is,better for me and why, I would be ever so apprreciative.

I am going to buy a macbook pro for grade 12, and I need to know wheather I should get a macbook pro or a macbook pro retina. If someone could tell me (in a very simple way) which one is,better for me and why, I would be ever so apprreciative.

Why do you need a expensive MacBook Pro?
Your attending high school and unless everyone else is rich also your likely going to be a target by the more poorer students for theft or damage to the machine.
You could keep it home, but if you need it for class then your exposed again.
Also at that age your not very careful yet, a MacBook Pro is a expensive and easily damaged machine.
Unless your made of money and so are others at your school, I would recommned a low profile, just does the job cheap Windows PC.
If it dies, gets lost, stolen or damaged because of your inexperince handling senstivie electronics then it's no big deal.
You can buy a Mac later on when your sure you have a need for it, currently there isn't much advantage of owning a Mac compared to a PC, they do just about the same things now, one just looks prettier than the other.
Since 95% of the world uses Windows PC's your going to have to install Windows on the Mac in order to keep your skills up there or be unemployed, so it's a extra headache and expense.
good luck

Why did so many permissions need to be repaired after Mavericks?

Here's my story regarding Repairng Permissions; its seems a repair is the only thing keeping my Mac running.
I've a Mac Book Pro 15" Spring 2011, been doing the upgrades etc ever since, but after Mavericks upgrade I was having issues never seen before with my Apple upgrades. In short after upgrade I was getting gray screen, blue screen etc. Random screen splits with horizontal lines.
Took many tries to reboot, safe reboot, clear pram, etc. I ran EtreCheck got rid of lots of things. I broke out disk and ran full hardware test - all good. I have reinstalled OS X, as well as done two clean reinstalls of everything. Even after that, I would still crash from time to time, with gray and blue screen either after re-awakening or simply opening iPhoto.
Nothing in panic or crash logs except this: 12/29/13 1:49:17.286 PM com.apple.launchd.peruser.501[294]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Once I finally got in, I went to disk utiloity and ran verify permissions and saw many issues, then ran repair disk permissions. I wanted to keep the log of all the changes and went to print and save as PDF - it was over 521 pages of permissions fixed! I didn't bother saving that file, I wish I did now.
I've been runing about 2 days without blue, gray crash so I am hoping that fixed it - but if this was a plane, no way would I fly it.
My question: After the both reinstalls and clean installs, why would so many permissions need to be repaired?

For some reason, after I run repair permissions in Disk Utility, I can run it again, and the same problems are "corrected."
That's a waste of time.
Is Disk Utility actually doing anything?
Basically, nothing on second or subsequent runs when the function is used repeatedly.
It seems like every time I run repair permissions the same problems are present. Has this happened to anyone else?
Click here for information.
(56609)

I have flash professional cc and I need air for desktop application with .exe or .air that should contain all swf's and captive air runtime in one Installer only . I don't want to install separate adobe air runtime .

I need Air for desktop application either in .exe or in .air with embedded captive runtime just like .apk . I don't want to install adobe air separate . everything should come in installer
I have adobe flash professional cc development tool , let me know whether I have to go with other development tool???
your reply will increase my confidential level
please anyone can help me to solve this problem
Thanks&regards
Niranjan

Adobe Flash Professional CC manual
1) Create new project
2) Configure your Project properties
3) Embed runtime, so you users can use Adobe AIR without pre-installed Adobe AIR runtime
4) After publishing you will receive %APP_NAME%.app folder that contain your project files

I need information about personal experience with DFS-R: shortcomings and limitaions of DFS-R

Hello,
We plan to install DFS-R in our organization.
I need information about personal experience with DFS-R: shortcomings and limitations of DFS-R.
Thank you for any info.

Hi,
You could refer to the articles below to see some limits about DFSR and some DFSR configuration mistakes which will cause DFSR problems:
Understanding DFS Replication "limits"
http://blogs.technet.com/b/filecab/archive/2005/12/12/understanding-dfs-replication-_2200_limits_2200_.aspx
Common DFSR Configuration Mistakes and Oversights
http://blogs.technet.com/b/askds/archive/2010/11/01/common-dfsr-configuration-mistakes-and-oversights.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C

Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C++?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
littlered1382 wrote:
I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose.

Do you need to add a router to get wi fi, on an imac desktop?

do you need to add a router to get wi fi, on an imac desktop?

Depends. How do you get your Internet connection and does your provider install a gateway modem a gateway/router modem?

HT3702 apps store said that the game is free but why the bill says it need money? please reply me!!!!!

apps store said that the game is free but why the bill says it needs money?
please reply me soon!!!!
chan family
<Email Edited By Host>

Did you add or change your credit card details when downloading the app ? If so then you've probably received a temporary store holding charge, which should disappear within a few days : holding charges. Or have you made any in-app purchases within the app (what app is it) ? If you log into your account on your computer's iTunes (Store > View My Account), what shows under your purchase history ?
As these are user-to-user forums, you are not talking to Apple here, I've asked the hosts to remove your email address from the post's title.

Why redeeming a code is so complicated? We need valid reason and explanation to get and satisfied on what we paid for. Make things easy, not messy.

Why redeeming a code is so complicated? We need valid reason and explanation to get and satisfied on what we paid for. Be user-friendly to make it easy not messy.

I did that link you refer to me (manually and using camera). But still nothing happens, always prompted "not properly activated" or "invalid code". And i did follow the instructions how to send an issue/problems/case regarding itunes card code query.
My apology dude.
I did change country/region, itunes store country, apple id, but still prompting FAILURE "The Gift Certificate or Prepaid Card you entered has not been properly activated." Does it mean it needs to activate by Apple Inc. before i can use it? If that's the case, everytime i buy an itunes card, i need to go Apple Support? Is that so?
Please help me dude regarding this matter, i know you're well knowledgeable about apple systems.
Thanks in advance.

Why the underlined code is needed?

import java.io.*;
import java.util.*;
public class TestCoding{
     public static void main(String[] args)throws IOException{
DataInputStream sysin = new DataInputStream(System.in);
          String strout = null;
          String enc = System.getProperty("file.encoding");
          System.out.println("file.encoding is " + enc);
          while ((strout = sysin.readLine()).length() != 0) {
               System.out.println(strout);
               byte[] ad=strout.getBytes("ISO-8859-1");
String sendToServer = new String(ad);
System.out.println(sendToServer);
when I input chinese chars ,such as "��",then the direct output of "System.out.println(strout);" will be "????",but the second output is correct!
and the system setting is : jre1.5.0_06, windows server 2003
My doubt is : since the default coding is GBK, why the underlined statement is needed for correct displaying?
Any help is appreciated!
Message was edited by:
mik

The real mystery is why people continue using
DataInputStream to read text despite the depracation
of the readLine method with the following warning:
Deprecated. This method does not properly convertbytes to characters. As of JDK 1.1,
the preferred way to read lines of text is via theBufferedReader.readLine()I don't think people will get the messages if they are working on plain text editor. That's why.
:D

When I export my photos, I am not getting the full mb's, why? What do I need to do differently? Frustrated.

When I export my photos, I am not getting the full mb's, why? What do I need to do differently? Frustrated.

What's the end user going to do with the File? If it's for screen use - Internet, Web Galleries, then 72 dpi is fine. If printing, then 300 dpi is often quoted as a rule of thumb.
In the Export dialogue you can create your own presets or edit the existing one. If you edit you'll see the quality slider. Higher quality means less jpeg compression.
Regards
TD

HT3477 Why would a Guest network need an Access Control List?

I have an Airport Extreme running software 7.6.4 and I have figured out today, to my dismay, that because I have an Access Control List active on my main network (with MAC addresses of my devices), the Guest Network feature, as implemented, becomes simply useless.
Essentially any friend coming at my place, to whom I want to share my internet connection for a while (say, a couple of hours) with an easy password, either provides me with the MAC address of his device, or has no access at all. And if he has to give me the MAC, then I could just simply add him to the main network in the first place and, BTW, I need to give him also the (complicated) password of my main network.
What is the purpose of a Guest Network then, if it is subject to the same access restrictions of the main one? I need to remove the access list on my main one, to offer quick and easy access to friends and family defeating the purpose of protecting my main network with MAC addresses and a separate guest network?
I don't get it. This is a bug. It has to be. I see no logic in it, in the way it is implemented. Or it should have 2 separate access lists, for flexibility. But a *Guest* network, should be by definition open, or easy access (with password, sure, if necessary) - and in case it should have restricted access, it should be by time maybe, not by MAC address....!

Why would a Guest Network need an Access Control List
The short answer would be that it would not need an Access Control listing......if you used the default settings in Timed Access.
Sorry, but I do not understand how you have constructed your Timed Access control list.
Normally, you would use the default settings and leave the "main" (and "guest") networks set for Unlimited Access.....and then only list the devices that you want to limit separately, establishing "rules" and timeframes for each device that you want to control.
When you do it the default way, a user would be able to connect to the Guest Network at any time, provided that he/she had the password for the guest network. No MAC Address needed at all.
If you wanted to limit the time that the "guest" could connect to the guest network, you would have to set up a "rule" for the guest. I would not normally think of limiting the time that a guest could connect.....(unless the guest were one of the grandkids).
It sounds to me as if you might have set the default network setting to No Access, and you have then set up each device with the times that they would be allowed to connect.
If you did it this way, then the default No Access would also apply to the Guest Network....and any guest would have to then be set up by MAC Address with a rule set for the times that they were allowed to connect.
Personally, I have changed the default rule for the "main" (and guest) networks from Unlimited Access to Everyday between 7:00 AM and 11:30 PM. So no one on either the main or guest network can connect before 7:00 AM or after 11:30 PM.
Then, there are a few rules that I have for devices that connect to the guest network to further limit them to certain times each day. You could do this as well for devices that you want to control on the "main" network.

I need Web Applications Desktop Integrator...for window xp

I need Web Applications Desktop Integrator...for window xp (window xp as client with oracle 11i)
please share any link or website for download/setup
thanks &regards,
A.A

893544 wrote:
I need Web Applications Desktop Integrator...for window xp (window xp as client with oracle 11i)
please share any link or website for download/setup
thanks &regards,
A.AAre you looking for client-based ADI or Web ADI ? If the former, see Helios' reply above.
For Web ADI in 11i, see these MOS Docs (and the docs that they link to)
FAQ: Certification Information For Client ADI And Webadi [ID 1251224.1]
Which Customers Need to Migrate From Client/Server ADI to WebADI and Report Manager? [ID 458589.1]
Web Applications Desktop Integrator (Web ADI) List of Patches [ID 726989.1]
HTH
Srini

Installed update to Muse CC 2014. It says it failed but App was installed and seems to run fine. Do I need to uninstall and reinstall to get my Creative Suite desktop App to show properly?

Installed update to Muse CC 2014. It says it failed but App was installed and seems to run fine. Do I need to uninstall and reinstall to get my Creative Suite desktop App to show properly?

no, follow solution 2 here, CC desktop lists applications as "Up to Date" when not installed

Why are ports 36000-36999 needed for iChat AV

I have a homegrown firewall on my network that allows me to do whatever I wish.
When testing this with a ichat AV 4 user, I had to open the following ports to make it work:
${fwcmd} add pass udp from any to any 36000-36999
${fwcmd} add pass udp from any 36000-36999 to any
Once that was done, the video/audio worked fine. I had already punched the other recommended holes:
${fwcmd} add pass tcp from any 5190 to any 1024-65535
${fwcmd} add pass tcp from any 5298 to any 1024-65535
${fwcmd} add pass tcp from any 1024-65535 to any 5190
${fwcmd} add pass tcp from any 1024-65535 to any 5298
${fwcmd} add pass udp from any 5060-5061 to any 1024-65535
${fwcmd} add pass udp from any 5190 to any 1024-65535
${fwcmd} add pass udp from any 5297-5298 to any 1024-65535
${fwcmd} add pass udp from any 5353 to any 1024-65535
${fwcmd} add pass udp from any 5678 to any 1024-65535
${fwcmd} add pass udp from any 16384-16403 to any 1024-65535
Why were the 36000 ports needed?
Also, when testing with an iChat 3 user, I couldn't initiate the call, but they could and it worked...
One more thing I should add is that I tested the ichat4 to the appleu3test02 aim user and it worked without punching the 36000 holes.
Any clues would be very helpful.
Thanks,
Micky

Ok,
I will tell you which ports iChat 4 uses.
You can then decide how to enter them into your set up.
5190 on TCP for AIM Login. An alternative we suggest is 443
This can be SSL on either port for iChat 4
5190 on UDP for File Sending, Pic in Text chats (Direct chats) and Group chats.
5222 and or 5223 on TCP for Jabber login depending on your Server
5220 for Jabber on TCP (rest of their port use)
5297, 5298, 5353 on UDP for Bonjour
5298 on TCP for Bonjour
5678 on UDP for sending and receiving Visible part of A/V invite
Ports 16393-16402 on UDP for the SIP connection phase with the SNATMAP server AND the A/V chat it self. Use one port at a time for all of this (Different from iChat 3) Starts at port 16402 and move down one port at a time for those 10 ports then tries random port.
5900 TCP for Screen Sharing (Unsecure connections) VNC.
See this Doc for some info
http://docs.info.apple.com/article.html?artnum=93208
This for some of the iChat 4 Changes
http://docs.info.apple.com/article.html?artnum=306688
This for the VNC bit and confirmation on Port Use and the use of Jabber on some server 5553 in Note 10
http://docs.info.apple.com/article.html?artnum=106439
What happens sometimes is that if the other end is doing Port Forwarding, DMZ or Port Triggering with NAT happening in two or more devices then the ports get changed.
You see this is some Error 8 logs. This in fact itself goes back to info that appeared in the Error log drop down in iChat 2 (And 3 before 10.4.7) that gave you some of the info about how the call was progressing when it failed.
Doing NAT behind tow or more routing devices can be the problem. It is even worse when people have two DHCP server further complicating the issue.
I am not sure why you have not pointed them port for port.
(I know the Apple Doc does says in it's table that this is an option.)
Most domestic devices via a web browser set up, work fine pointing 5190 at 5190 for example. iChat data is then expected on an iChat port and pointed to an iChat port on your computer.
Realistically a firewall should work the same way.
10:23 PM Wednesday; November 14, 2007

Why do we need to need Desktop Experience to get Disk Cleanup?

Similar Messages

Maybe you are looking for