Why do we need two windows in a webdynpro DC

Hi all,
         Can anybody help me in finding the reasons to create mor ethan one window in a DC.
thanks

I use other windows to show popups but I'm sure there are lots of other uses

Similar Messages

  • Service Registry: why do i need two bindings (wsdlDeployment and endPoint)

    based on the technical note of Clemens Utschig "Enabling a Dynamic, Reusable SOA with Oracle BPEL Process Manager and Oracle Service Registry" i have one question:
    why do i need two bindings (wsdlDeployment and endPoint) in my service in the service registry. if i only define the wsdlDeployment if get this messages:
    <2006-12-07 09:39:02,559> <FATAL> <default.collaxa.cube.ws> no endpoint found - nothing to adjust
    <2006-12-07 09:39:02,559> <WARN> <default.collaxa.cube.ws> Could not lookup base endpoint!
    the problem of defining two bindings is that the url to my partner is redundant.

    Hi Clemens,
    The UDDI Version 3.0.2 Specification (http://www.uddi.org/pubs/uddi_v3.htm) say this:
    B.1.2 Using the "wsdlDeployment" value
    Instead of directly providing the network address in the accessPoint, it is occasionally useful or necessary to provide this information through indirect means. One common scenario for such a behavior is when the accessPoint is embedded within a WSDL file. In such a scenario, the UDDI accessPoint contains the address of the WSDL file, and the client then must retrieve the WSDL file and extract the end point address from the WSDL file itself.
    In this case, decorating the UDDI accessPoint with a useType="wsdlDeployment" is appropriate. A sample of such behavior is as follows:
    <bindingTemplate bindingKey="uddi:example.org:catalog">
       <description xml:lang="en">
           Browse catalog Web service
       </description>
       <accessPoint useType="wsdlDeployment">
           http://www.example.org/CatalogWebService/catalog.wsdl
       </accessPoint>
       <categoryBag>
           <keyedReference keyName="uddi-org:types:wsdl"
           keyValue="wsdlDeployment"
           tModelKey="uddi:uddi.org:categorization:types"/>
       </categoryBag>
    </bindingTemplate>In the example above, a client would be able to parse the result of the bindingTemplate and determine the end point of the Web service within the WSDL file discovered in the accessPoint element. Note that the bindingTemplate has also been categorized with the "wsdlDeployment" value from the uddi.org:categorization:types scheme so that it can be discovered through a find_binding API call.
    1) This means for me that providing one binding with useType=wsdlDeployment should be enough.
    2) Sadly the "Business Service Control" of the Service Registry (Publish new WSDL service) does not create the correct structure needed by the bpel-engine. The "Publish new WSDL service" wizard just creates one service with one binding with useType=other (http). So if i want to reuse this published service from bpel (as a service consumer) i have to switch to the "Service Registry Admin Control" and create a second binding with useType=wsdlDeployment. But i don't want the developers to get inside the "Service Registry Admin Control"! They should only work with the "Business Service Control".
    All this makes the usage of the service-registry very unhandy and reduce the acceptance for developers because of unnecessary manual steps and broken security principles.
    My wish for this issue is that the "Publish new WSDL service" inside the "Business Service Control" of the Service Registry would additionlly create this needed binding with useType=wsdlDeployment.
    Best Regards,
    Harald Reinmueller

  • Why does EJB needs two interface???

    Hi All,
    This has been asked by many ppl and many of you might be having
    the correct answer for it. Please tell me....
    Why does EJB needs two interface (Home and Remote Interface)?. Why not one?
    Thanx to all...
    Regards
    GoodieGuy

    Hi Goodie ,
    Its good question and its a very valid one , one has to have doubt
    why two , why not one ..
    Here the answer goes ..
    First of all you need to understand that its a distributed computing technique ie I mean lot of people will be accessing the bean at the same time , right ? OK , you cann't access the bean directly.
    and lastly the stateless and entity beans do instance pooling.
    The very purpose of having two interfaces is
    1) To differnentiate the bussiness logic and life cycle methods .
    2) The home interface inititates life cycle methods like creation , destruction etc .
    3) There are lot of beans in the container , and through home you are
    creating the instance or accessing one of them .
    4) Once you have home object using it we get the remote object ie the instance of the bean that you want to access if stateless any bean can be called , if statefull depending upon the parameter in create method that respective bean is created and invoked .
    In ejb 1.0 and 1.1 even though the bean and the client are in same jvm its assumed that they are remote and in 2.0 Ver we have local this is to avoid network traffic .
    Hope you have got the answer , but if u still need clarification
    read EBRoman book first and second chapters thoroughly and then proceed
    a head.
    Bye
    Mahesh L.
    ============

  • IDVD- I need two windows opened at once...is that possible?

    I am working on two separate IDVD projects. I would like to have two windows in IDVD opened at the same time. When I open the first project it shows in on my screen, then I go to file to open a new one and the first project is overridden. Is this not an option?

    You'd be better off posting this in the iDVD program forum where you'd get readers who have actually used iDVD rather than the Tiger OS forum.

  • Why does FF open two windows when I open it? Why can't I close the second window without closing FF altogether?

    After FF automatically updated it started opening two windows whenever I start FF. One window has the open tabs from my previous session and the other window has only the FF home page open in one tab, nothing else. I can't close either window without shutting FF down altogether. I have limited RAM (3GB), running Mac Lion, which eats up a lot of resources and now FF eats up the rest. It's a real pain in the ass.

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • Qosmio G30 - Need two Windows operating systems: Vista and XP

    Hello,
    can somebody help me about procedure for next request:
    I need both operating systems on my Qosmio: Vista and XP
    I have two RAID drives inside my Qosmio and I have installed Vista on first one.
    I tried to install XP on second hard drive and I did that (I inserted XP installation disk and sellected second drive for installation) but after installation I had just XP boot option.
    I can see all Vista files on the first disc, but boot sector enables XP only. XP Windows directory was intalled on second drive, but boot.ini and some system files were in the root of the first drive.
    I prefered Vista and I repeated the procedure (with my recovery Vista CD) and now I have Vista on first disk and all files of XP on second disk. I did not investigate how to obtain complete bootable XP system on second disk.
    What I need:
    Vista on first drive.
    XP on second drive
    I would like to have completely independent Windows system. That means I need boot selection by BIOS, not by Vista or XP.

    Thank you for your help,
    but I have solved my problem by the next way:
    Fistly I installed Vista by the recovery disk.
    After that I phisically removed the disk No. 1. (open the cover unscrew the hard disk and put out the hard disk).
    I started the Qosmio and I was informed that disk No.1 has problem but I continued with CD boot procedure with XP installation disk inside. I installed the XP on the disk No. 2, and after that I put the hard disk No.1. on its position again.
    Now, I can boot my Qosmio from the disk No.1 with Vista, or from the hard disk No.2 under XP operating system.
    That is all. The screw driver has solved all my problems with BIOS possibilites and hard disk enable/disable.
    Best regards,
    Dragan

  • Why do we need two tables before OBIEE answer will work ?

    I just imported a physiical table and dragged it to BMM layer and to presentation layer. I am getting these error messages after I save
    " nQsError 15001 could not load navigation space for subject area xxxx '
    15013 Logical table xxxx does not join to any other logical table
    Wondering why we need a join if there are no other tables
    thanks

    It's a conception of BI Tool. It will be at least one dimension and one fact with link between.

  • Why does the system need two average costs - 'Average' and 'Average Rates'?

    Hello Gurus!
    The documentation does give definitions for 'Average' and 'Average Rates' cost types, but at a very basic level.
    http://docs.oracle.com/cd/A60725_05/html/comnls/us/cst/settask.htm
    I would like to know why the system needs two costs? How are they calculated and how are they used?
    Thanks!

    Hello,
    I can suggest you a workaround that will help you keep only the 64-bit version of Photoshop.
    Visit "Uninstall a Program" in Windows 7 Control Panel and uninstall Photoshop completely.
    Visit this page and download trial version of Photoshop.
    Run the installer manually and choose the 64-bit version only (uncheck 32-bit version).
    Launch the product and specify your Adobe ID credentials.
    The product will switch to non-trial (i.e. full) mode when it recognizes your Adobe ID.
    Regards,
    Amit Batra
    Engineering Manager,
    Amit Batra

  • HT201236 I want to do something so simple that there are no instructions. I just need to have two windows open at the same time so I can transfer files from one to the other by drag

    I want to transfer files from one device (or page ) to another by drag and drop , so i need two windows ope   at the same time,
    I know this can be done but I have forgotten how

    Don't use any full screen options for any app that has them
    Mount your device and double click on it to open it. Drag this window to the upper right of your Desktop and resize it to a bit less than half of your Desktop.
    Open the next folder and position it on the lower left side and resize it so you can still see the previous window.

  • Why do I need a second java.exe when I alreayd have another in a JDK instal

    When I install JDK then there are two instances of java.exe
    (and other programs like javaws.exe). One instance in
    INSTALL_DIR\bin\
    and the other in
    INSTALL_DIR\jre\bin\
    So why do I need two exes instead of one?
    Peter

    Hello!
    So why do I need two exes instead of one?Don't know the reason myself, ask the developers..........
    One instance in INSTALL_DIR\bin\
    and the other in
    INSTALL_DIR\jre\bin\Yes, checked that, you are right.
    But , whats the problem, It hardly takes 2MB more space.
    Or, were you implying that ideally java.exe and javaws.exe should not be in "INSTALL_DIR\bin\" as they are involved in running the java programs.
    Thanks!

  • LabVIEW 8.2: Running VI as Application via Runtime creates two "windows" in taskbar

    Hello,
    I am running a VI as a compiled application in the runtime engine with windows xp. Why does it generate two "windows" in my taskbar (see attached picture) while both of them are the same?
    Thanks a lot and best regards.
    Michael
    Solved!
    Go to Solution.
    Attachments:
    Taskbar.pdf ‏23 KB

    Hi MichaGue_01,
    This is a LV7.1 Vi that does exactly what you want....  Just uncheck all "Allow user..." options under "VI Properties >> Customize..." and your .EXE will show only one window at the task bar.
    Hope this helps
    Attachments:
    Random.vi ‏14 KB

  • I have windows 7 and I can't sign into ITunes.  Message says to turn off compatibility mode to use.  How and why do I need to do this?

    I have Windows 7.  I was previously using Windows 98 when I set up ITunes and developed a library of music and movies.  When I try to log in I keep getting a message stating that am using an older version of Windows and that I need to turn off "compatability mode to use ITunes.  Where and why do I need to do this?

    Hi there skinguru,
    You may find the information in the article below helpful.
    iTunes for Windows: How to turn off Compatibility Mode
    http://support.apple.com/kb/ts1489
    -Griff W. 

  • How can I start two FF instances under two Windows accounts at once w/o -no-remote? I need to be able to send URLs to them.

    I have one FF (36.0) installation and two Windows user accounts: one for work (w/o internet access but with access to domain resources like JIRA) and one for internet access (w/o access to local resources). I need two instances of FF running at the same time with different resources.
    I've created profiles with different names under both accounts and specify profile names using -p parameter. However when I try to start both instances of FF (second one is started via RUNAS), second instance can't be started, new tab in already running instance is opened instead:
    firefox.exe -p profile
    runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i"
    When I start one of them with -no-profile, I can start both at once... but when I try to execute firefox.exe with an URL in order to open a tab with this URL in one of running instances (local URLs I open by starting firefox.exe under work account and remote URLs I open by starting FF via RUNAS), it can't sent URL to already running instance of same user, it always sends URLs to an instance that is runnung w/o -no-remote.
    firefox.exe -p profile -url "url"
    runas.exe /profile /savecred /user:user_i "\"firefox.exe\" -p profile_i -url \"url\""
    So, I need to have two instances under two different Windows user accounts, and when firefox.exe is started again, it should only communicate with instance that is running under same user account, it must not communicate with instance that is running under different Windows account.

    ''guigs2 [[#answer-699118|said]]''
    <blockquote>
    https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options#-no-remote
    This feature was removed and unfortunately I do not have any ETA or work around for this.
    </blockquote>
    It was the different '''-remote''' switch that was removed and not the '''-no-remote'''
    https://www.mozilla.org/en-US/firefox/36.0/releasenotes/

  • Windows Vista Ultimate on Dell XPS Notebook: Why do I need Boot  Camp?

    I use Windows Vista Ultimate on my Dell XPS Notebook, and application software includes iTunes and Apple Store. Is this why I received a message to download "Boot Camp"? Why do I need Boot Camp?

    Sounds really messed up to me. Bonjour? maybe.
    Apple AppStore? I think everyone has the right to their own appstore but I thought only an Apple deivce (mac, iphone, ipad, etc)
    Apple doesn't support or license use of Mac OS on other hardware, which they call "hackintoshes."
    Check the iTunes for Windows forums and support pages.
    iTunes for Windows
    Apple Support iTunes
    Apple Support Site Map
    App Store Boot Camp hanging

  • Why do we need cygwin for Apps R12 on windows ?

    Hi,
    Can someone throw some light on
    ---Why do we need cygwin for Apps R12 on windows ?
    Which kind of activites need cygwin for R12 Apps.
    -sasi

    Hi Sasi;
    You need to use mkstoolkit or cywgwin to work EBS on windows coz of to can run some perl and also can use some command as kill, ps, ls etc..Apps tier also need that program can compile something inside.
    Please see:
    The Cygwin tools are ports of the popular GNU development tools for Microsoft Windows. They run thanks to the Cygwin library which provides the POSIX system calls and environment these programs expect.
    With these tools installed, it is possible to write Windows console or GUI applications that make use of significant parts of the POSIX API. As a result, it is possible to easily port many Unix programs without the need for extensive changes to the source code. This includes configuring and building most of the available GNU software (including the packages included with the Cygwin development tools themselves) as well as lots of BSD tools and packages (including OpenSSH). Even if the development tools are of little to no use to you, you may have interest in the many standard POSIX utilities provided with the package. They can be used from one of the provided Unix shells like bash, tcsh or zsh, as well as from the standard Windows command shell if you have to for some sad reason.
    http://www.cygwin.com/
    Regard
    Helios

Maybe you are looking for