Why do we see only values of key figures of a cube in SE11?

Hi all,
When we view the contents of a cube in SE11 why cant we view the characteristics also? Why are only the values of key figures visible to us? Is there any way wherein we can also view the whole contents of the cube i.e. both the characteristics and the key figures?
Please explain.
Thank you.
TR.

SE11 gives you the Table View.
A Infocube is a complex strructure where data is stored in mutiple Tables...
KEy Figure Values in Central Fact Table...Characteristic SIDs in the DIM Table and these SIDs linked to the Master data table values.
So, to be able to read the values , you would need to know how data is organised in an Infocube
Regards.

Similar Messages

Why can i see only one picture in the illustration windows with iTunes 10.5.1?

why can i see only one picture in the illustration windows since iTunes 10.5.1?

Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
I've developed a quick workaround, and am still hoping Apple will fix this!
Go To Get Info on the tune you want to see secondary artwork for.
Go To the Artwork tab
Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
you end up with a lot of jpgs on the desktop to discard!

Selection screen value to reflect only on one key figure.

Dear all,
I have a query in which there are 3 key figures - for example Complaint qty,production qty and the PPM, this query is to be executed for a range of months - hence i have added the variable calmonth/year in the column and also i have restricted using a selection variable so that a range of months can be provided when the query is executed.
My problem is when the query is executed with the above condition, the range of months affects all the key figures - but i want the range of month value only for the key figure PPM.
Is there any way in which my requirement can be met.
Your experts advice will be helpful.
Regards,
M.M

Hi Sam,
Thank you for your reply. I will be happy if you could provide me the step by step process - so that i can check whether my requirement gets fulfilled.
Expecting your Expert opinion.
Regards,
M.M

250 Key figures in one cube?

Hello,
we need to report on 250 key figures at the same time. I now there is a limitation in the cube of 233 KF, any ideas to solve this problem? What about using an ODS for the reporting, are there any performance issues or do you have experiences with this amount of KF in one infoprovider?
Many thx
René

I think you should reaccess your data model and see if the no of key figures can be reduced. 233 is the max allowed by SAP. You can partyly solve this problem by creating 2 cubes with the same characteristics and splitting the key figures. This solution will work only when you have mutually exclusive key figures requirement in the report.
Also you can use the Restricted key figures and calculated key figures in the reports thereby reducin the actual key figures in the cube to be within the limit.
Hope this helps.
Amit

To delete and insert a new key figure in the cube

Hi Experts...
How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ?
Thank you..
Manohar....

Hi
Are you using Bi2004s
yes you can delete,add,replace a key figure
have a look at this blog for step by step procedure
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
hope this helps

Value of Key figure in report

hellow gurus
i'm workin on Bw 3.5
i have created Generic DS and for that i have created Customised info objects also..
but i;m facing one problem with one KEy Figure ( COST of SALE )
IN PSA and Cube Content the calue remain the same as Source System
like
3078.40
2697.56
but in Query it is comin as 307.84 and 269.75
i have tried with Decimal properties but those r either r for Scalin or Adding dEcimal places after the Decimal
But my problem is that i'm getting one decimal before one place
kindly help me in solving this issue..
Regards

Hi,
The automatic multiplication and division happens with the amount associated with the currencies which are present in TCURX table. Here are the details.
The mechanism is intended to allow the use of currencies (exceptional currencies) that have different number of decimal places from the 2 that is common in many places.
SAP stores currency values in a data type that has a fixed interpretation of two decimal places. There are some currencies that do not work well with that setting. Usually that is because for some currencies , a fraction o the currency unit is meaningless. That is true of the Japanese Yen, the Turkish Lira, Korean Won and many other currencies whose value is often 10 US cents or less. In some cases, people want to store currencies with more than two decimal places of precision. So, if I want to store 3 decimal places, then I need to have an entry -1 against that currency in TCURX table.
So whenever we ran a report in bex/wad, it checks TCURX table for currency entry, if there is an entry what it does: Multiplies the value with 10(2-TCURX entry).
For INR, the TCURX table entry is 3, thats why while loading it into BW, it will be divided by 10 (In external tab of InfoPackage currency conversion should be ticked) while at the time of displaying it in the report it will multiply it by 10.
But in your case only converse thing is happening. That is at the time of reporting it is dividing the amount by 10.
Regards,
Yogesh.

How to calculate the value of key figure by considering other char or kf

Hi
My requirement is like this:
I have a key figure which gives me the planned issues and receipts but i know that if only from locaton is blank and to loc is filled then that are receipts and if both the from and to location values are filled then it is issues,
can you pls let me know how i 'll put this logic in th reporting bex and how i achieve this by user exit or any other way
thx
rubane

Create two RKF, restrict first with [ from = '#' ] to get the planned receipts, and restrict the second with [ from <> '#' and to <> '#' ] to get the issues.

How to avoid negative values of key figure

Dear all,
I have to create one query based on ODS, in which i will use one key figure, which has negative as well as positive values. In report, i want to avoid all negative values or make them zero. Is it possible? Please guide me for the same.
I cann't make any modification to the ODS.
Regards,
Pravin.

Hi,
To make negative values as possitive you can use the formula abs().
ie: abs(key figure)
You can also create a condition in the query to show only values greater than or euqal to 0. Make it active, then you will get all values greater than or equal to 0.
Now if your intention is to show the negative values as 0 then use the formula as stated above.
Regards
Govind.

Removing Drill Down is not summing up the values for key figure

Hi ,
While analysing the data in BW report , I have encounter the problem in getting the correct data.
BW report is showing two records for material , having different customer ie. customer1 & customer 2 .
If i remove the customer from the Drill down , then values is not summed up , rather it is showing the values only for customer1
Scenario:
With customer drill Down:
Material    Customer   Key Figure1   Key Figure 2
Mat1       Customer1     1000          2000
MAt1       Customer2     3000          4000
Without customer Drill Down
Material Key figure1 Key Figure2
Mat1          3000          4000
In the query designer there is restriction of customer on two characteristic in default value pane.
The issue is happening for particular material , for other material , BW report is working fine.
Please suggest , to resolve the issue.
Regards,
Sudheer

Hi Sudheer,
What properties are set on your key figures 1 & 2. Could they be set to Min or Max.
There may be an aggregation level set if they are calculated key figures that is worth checking.
With regards
Gill

Fixed value Statistical key Figures based on Profit Centers - 9KE5

Hi all,
We have a Statistical Key Figure that is of Fixed Value category, based on Profit Centers. We are manually entering it in 9KE5.
Since it is of fixed value category, am I right to say that: once we enter in one period, it will automatically be updated in subsequent periods? But the current situation is, it does not update in subsequent periods, only the period which we enter.
Does anyone know how to correct this? So that once it is updated in 1 period, it will be automatically be updated in subsequent periods.
Thanks in advance!

Hi,
Yes, I saw the field and chose 1- Equal distribution.
I then select period 1, enter the quantities and save. Go back to 9KE5 and choose period 2, I expect the quantities entered in period 1 to be reflected in period 2. But this is not the case- there is no value for period 2.
I also managed to change the selection screen to have Period as select-options. If I choose Periods 1 to 12, the quantity I entered in 1 period is divided into 12, and it will only show that divided quantity. However, if I choose another Period, Period 3 for example, no value is shown.
Is this the correct behaviour? I am expecting the quantity entered in period 1 will also be shown in any other period.
Thanks!

Negative values of key figures to be displayed seperately

Hi,
I have a requirement where , the postive sales figures are to be displayed in one column and Negative sales figures are to be displayed in another column ina BEX report.... There is only one key figure ( sales )
how to get this please ?
PVC

Hi Pravendar ,
Thanks for your reply..
The key figure infoobject is only one called Sales..
If the value is negative , then it should display in seperate column in teh report..
I could not understand (KF < 0) * KF -
If the slaes figure is -1233 does this mean i should created a CalKeyfig
with (Sales < 0) * Sales ??
Can you please elaborate ?
PVC

Passing Char Values to Key figure

Hi All,
I have one issue for Inventory cube.
Every thing is fine with the cube, every thing is fine. since i wanted Last usage date i have enhanced the data source and the date is coming to cube well.
Since i dont want to put the Date as charecter , i wanted to pass the values of dats(char) to dats(kfg).
For example : 0APO_DAT this is char date since i need to pass the values to 0GIDATE(kfg). i mapped directly in the transformation level.
Now the problem is i am getting some dates very well, where ever some cancelled documents(dont know exactly) There the dates are coming as 05/17/4017 instead of 03/09/2009.
can any one Help me out
Regards
Ram
Edited by: Ram on Mar 10, 2009 10:34 PM

Ram,
Could you please check key figure to check what aggregation level it has. It should have Max and make sure that same aggregation level exist in your transformations.
Regards,
Pravin

How to see all structure and key figures

HI friends,
I can not to see in query designer all structure, all calculated and restricted key figure than I have create.
How can I do??
Thanks
bye bye

May be something wrong with authorisations... Trace it in SU53.
Or this is one of numerous bugs of BEx. Try relogon...
Foolish question: Are you sure that you are using the same infoprovider?

Convert characteristic values in key figures in a query

Hello all,
i have a query which provides some key figures and also some probabilties (defined as characteristics). I want to multiplicate the probabilities with the key figures and therefore I need to convert the characteristic values for the different probabilities in key figures.
What is the best wys to do this.
Any help would be great.
Best Regards,
Stefan from Munich/Germany

Stefan,
You need to create a formula variable of your characteristic.
In the Create Formula screen right mouse click on Formula Variable and go through the create process.
The characteristic needs to stay in your query (you can change it's display to No Display) to pass it's value to the formula.
Once you have done this you can use the formula Variable in any other formula.
Regards
Gill

How to get round off values in key figures

Hi,
My report has key figure which is showing as 6.64033 and I want it to be 6.64.
If it is showing 6.64677 I would like to be shown as 6.65.
Please suggest.
Thanks...

Why don't you try this. In the Query Designer, set your key figure properties as follow:
Display Tab > Number of Decimal Places > 0.00

Why do we see only values of key figures of a cube in SE11?

Similar Messages

Maybe you are looking for