WHY do we set up a RFC connection for workflows

Guys please tell me why do we setup a RFC connection for workflows.
I am getting few dumps for function module IDOC_ERROR_WORKFLOW_START_R in transsactional RFC connection.
Looks like it is because of temporary disconnection.
i want to know what is the relationship of RFC with wirkflows.
Thanks in advance

Quoting text in automatic WF customizing transaction (SWU3):
Function
The workflow runtime system always executes its tRFC (transactional RFC) calls on the logical destination WORKFLOW_LOCAL_xxx (xxx stands for the three-digit number of the client).
The workflow runtime system only operates within one client. The naming for the logical destination guarantees that these names are unique across the system.
If you carry out this activity automatically, the logical RFC destination WORKFLOW_LOCAL_xxx is created (if it does not already exist). The user WF-BATCH (system user) is assigned to this destination.
If you belong to the SUPER user group, and the WF-BATCH user does not exist, it is created and automatically gets the maximum authorization of the current user (SY-UNAME). This function is to be performed once by a user who belongs to the SUPER user group.
If you perform this activity manually, you can maintain another system user and another password.
In SWU3 you can configure RFC destination.

Similar Messages

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Mac OS X 10.6 Help: Sharing your Internet connection

No trusted/login RFC connection for system BCP in TA SMSY

Hi,
i got this error Early Watch Report for only production System.
No trusted/login RFC connection for system BCP in TA SMSY
Amit

HI,
I hope the error message is straight forward.
Please Check whether you have established RFC connections to the BPC system and the same is avaiable under the RFC connections in TRXn SMSY-Your system -.Test the connections in SM59-BPCs-> READ and Trusted RFCs.
If its not present, Generate the RFCs again manually.
Hope this helps.
Revert for any issues.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Oct 9, 2009 3:24 PM

How to setup RFC Connection for SAPOSS?

Dear Experts,
I tried to setup the RFC connection for SAPOSS based on the following settings, but when I test connection, it failed.
Target system : OSS
Msg. Server : ... ( this where I stuck which I'm not sure what to fill in)
Group : EWA
Client : 001
User : OSS_RFC
Password : CPIC
Does anyone know the right settings?
Regards,
Abraham

Hi all,
Do I really need to setup our own SAProuter if our firewall doesn't block any outbound IP address?
I've tried the following settings in OSS1 but still failed to connect.
SAProuter at SAP :-
Name : sapserv3 ( or sapserv7 or sapserv2)
IP address : 147.204.2.5 (or 194.39.134.35 or 194.39.131.34)
Instance no : 99
SAPNet Message Server
Name : oss001
DB Name : 001
Instance No : 01
I left the SAProuter1 and SAProuter2 (at customer site) blank.
Did I miss out anything?

Clarification on RFC connections for MM-SUS set up in SRM

Hi All,
I am stuck with replication of vendor from R/3 to SUS. I have made the RFC connections as mentioned below
R/3 Side: R/3 to XI - Type 3
SUS Side: SUS to R/3 - Type 3
                SUS to XI (LCRSAPRFC) - Type T
                SUS to XI (SAPSLDAPI) - Type T
                SUS to XI - Type H
XI Side: XI to R/3 - Type 3
            XI to SUS (LCRSAPRFC) - Type T
            XI to SUS (SAPSLDAPI) - Type T
Can you please confirm whether these connections are sufficient for MM-SUS set up.
Thanks in advance!
Regards,
Ram
Edited by: Ram K on Sep 21, 2008 10:16 AM

Hi Ram,
Vendor Master data R/3 to SRM
1.Find the vendor group in  SRM
TC= PPOMV_BBP
Ex:- VG Id= 50000041
2.TC= BBPGETVD     in  SRM
Give the following parameters
System(R/3), Vendor no in R/3, Pur. Org, Object ID:50000041
Then click on start transfer.
3.TC= SLG1   Check the Q if have strucked
4.Check the vendor no in SRM System use TC= PPOMV_BBP
Note:-
R/3 & SRM number range shoul be same
R/3 internal/External No. range equal to SRM External number, Then only replicated
If u need more details pls contact to my Id bvnvrao yahoo.com.
I will forward screen shot document.
I think it will help.
WR
Rao

Configuring RFC connections for load balancing.

Hi ,
We have the following landscape for our systems.
The database is installed on z/os , db2 (mainframe). The central services( SCS and ASCS) are also on the mainframe. So the message server is on mainframe.
The CI is on AIX and The DI is on AIX.
We have Logon groups configured and load balancing Configured and is RFC enabled.
1) When we connect to SAP using the SAPGUI and the portal connection is made to either CI or DI depending upon the best response times. Now recently we are running the mercury load testing, all the users are connecting to DI. Why are the users connecting to DI even though we have load balancing?
2) I have a system with SID BP0, with one CI and one DI. The logon group is BP0 and the message server name is cyrix. Now I have other another system EP0. I have created a RFC connection from EP0 to BP0. In SM59 I have selected the load balancing option, and provide the message server name, SID and logon group name. The connection does not work. If I connect directly to the CI or DI the connection works. Please tell me how can I configure load balancing for RFC connections.
Thanks
Manmath.

Dear 917996,
There are two types of load balancing:
- Client-side load balancing (setting up the tnsnames.ora on client side). More information here (http://ggsig.blogspot.co.uk/2012/04/client-side-
load-balancing-in-oracle.html). Very good video produced my friend Igor Melnikov is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/client/clientloadbalance_viewlet_swf.html)
-Server-side load balancing (remote_listener and setting service parameter clb_goal). Very good Igor Melnikov's video is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html).
I have read about client side and server side load balancing. By editing tnsnames.ora I have enabled client side load balancing which is suppose to select listeners at random. then why does it only go to second node?Could you please show your tnsnames.ora on client?
Please can anyone help me to configure server side load balancing with SCAN. I have read many many post but couldn't find a clear answer.Based on your output (remote_listener string cmbtrnrac-scan:1521) you have already configured the server side load balancing.
SQL> show parameter listener
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=10.1
7.67.214)(PORT=1521))))
remote_listener string cmbtrnrac-scan:1521How many SCANs do you use? Do you use DNS?
regards,
Gennady

RFC Connection for HR

Hi,
I'm trying to create a rfc connection between hr client and custimizing client for other modules. but is SALE when I'm trying to distribute my distribution model I always face this error:
"name or password is incorrect".
I changed the RFC password and my communication user many times but it didn't work. would you please tell me what is the problem?

Create an 8 character long password which is all in UPPER CASE letters and change the user type to SYSTEM.
Does that work?
Cheers,
Julius
ps: see RZ11 param: login/password_downwards_compatibility for background to why I am asking.
Edited by: Julius Bussche on May 31, 2011 5:02 PM

RFC connection for nonSAP system

Hi all
i want to send and receive data from b/w SAP and NON-SAP systems. plz tell me which type of RFC connection i will use.
Regard
Imran Khan

Imran,
Check the attached link.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a]
Manoj

Test RFC connection for Logical port

Hi,
I've created a new Proxy class in my development by consuming the WSDL file and attached it to a package.
Also i have created Logical port based on the WSDL file in SOAMANAGER. But when I test the RFC connection which gets automatically created
I get message u2018Create failed: Argument not foundu2019, If any one has experienced this problem please guide me.
Thanks,
Ganesh

Hi Bhaskar
Kindly refer the SAP Note with RFC error
1906868 - Transaction program not registered error happened during connection test of Java Idoc adapter
1989478 - IDoc_AAE 'Program XI_IDOC_DEFAULT_PID not registered'
Regards
Sriram

No of RFC connections for a period of time

Dear all,
Is there any possibility to find the number of RFC connections hit to a server over a certain period of time?
I could not find any more details using AL08 since it gives the cumulative users rather than specific user type.
Regards,
Kumar
Edited by: Anees Qureshy on Jun 16, 2010 1:43 PM

Ya i have checked under that location.
But It will give the total no of calls that have been made.So if we assume 20 calls made,then im sure it does not imply that 20 connections have been made.
We have enabled a max of 2000 connections at any time.
But the number it is showing is in lakhs..I guess that is no of cumulative rfc calls made.
I still wait for a suitable reply.

Setting Up the SLD Connection for WebDynpro Flight List

I have to set the "cim client generation settings" in the visual admin. But what host? J2EE Engine, R/3 backend, something else? An example would be helpfull.

HI to everyone,
I have the same problem...
...the configuration of SLD is really a pain...
My WAS 6.40 J2ee only java is named pedroxp an runs on 50000.
I have done these steps:
1)In Visual Admin I have set all the property of the famous SLD Data Supply with these values
HTTP Settings
host: pedroxp
port: 50000
user: Administrator
The same values are in the CIM Client generation Setting
and in the RFC Settings I have
Gateway Host: localhost
Gateway Port: sapgw00
When I test the Button CIMClient Test I have success !
2) I connect to my ... SLD
http://pedroxp:5000/sld
Here I have defined a Technical System Type --> Web as java
I have added a JCO Destination --> OK
I don't know what to do in order to add a Message Server
I have also added info in Data Supplier Bridge Administration...
3) I go to WebDynpro console
http://pedroxp:50000/webdynpro/dispatcher/sap.com/tcwdtools/Explorer
but when I try to create a new JCO Destination,
I go trugth all the 6 steps ... some doubt about the Message Server or Saprouter selection in step 4.2.
When I click finish I have an Error ...
An Error quit difficult to read because is just one row long a kilometer...
Who is so kind to bring the light in this mess ?
I have read a lot of documentation,
but I can't figure it out alone...
Thanks in advance

BW Authorization and setting issue to set up a BICS connection for Xcelsius

We are trying to create a BICS connection with Xcelsius on our BW production system and would like to know what the minimal settings should be to be able to publish and run an Xcelsius dashboard. We have been able to make a BICS connection with Xcelsius and publish and run/launch the dashboard on BW development. BW Development is completely open; there are no restrictions on the settings. But of course we cannot open our production like this. We have tried to open our BW test according to the SAP NetWeaver How to Guide: How to... Create Authorization Objects Required to Work with Xcelsius Dashboards in SAP BW. We have done the following:
First of all we get the following message when saving a Xcelsius file to BW, when all the settings are equal to the production settings (not modifiable):
! The specified technical name is not valid for the permitted namespace
!     R7     063     Namespace u2018/BICS/u2019 must be set to u2018changeableu2019 (transaction SE06)
After that we changed the settings on our BW test environment to modifiable by doing the following steps:
1.     SCC4 (System temporarely open; after changing the system change options by SE06; the system will be closed again)
2.     SE06 (Namespace /BIC/ to modifiable)
After that when trying to do the same thing as before, saving the Xcelsius file to BW, we get the following error message:
! The specified technical name is not valid for the permitted namespace
!     R7     017     Namespace u2018u2019 is not a valid BI namespace
And also this message:
Diagnosis
Namespace u2018u2019 must be entered in both the BI table RSNSPACE and the basis table TRSNSPACE or the view V_TRNSPACE. You also have to enter the relevant generation namespace u2018&V2u2019 in table TRNSPACE. This value is taken from RSNSPACE.
Both namespaces must be set to u2018Changeableu2019 u2013 providing they are not empty.
System Response
You cannot edit or create an object in this namespace.
Procedure
Use a different name.
Or contact your system administrator. He/she can switch the namespace to u2018Changeableu2019 using transaction SE06, or - if they do not already exist - enter them in the table named above using transaction SM30.
If the namespace u2018&V1u2019 is empty, then the problem is with the generation namespace u2018/BIC/u2019.
Procedure for the System Administrator
Following this error message:
X    System is not set to changeable u2013 objects are not changeable
When everything is set to modifiable and the BW test environment is fully open, we are able to publish the Xcelsius file to BW and the dashboard can be run on the BW data.
What we would like to know what the minimal settings should be to be able to publish and run/launch the Xcelsius dashboard without completely setting the production setting open. And what are the other consequences of adjusting the BW production settings; any drawbacks?

Hello,
goto transaction RSA1 – transport Connection – button « Object Changeability » - in the list please switch ligne XCLS as « Changeable ».
Hope that works
Best regards
Arno

Setting up Excel CI connect for FSCM 9.1 VM templates

I want to use the Excel to CI in the FSCM VM Demo system. I have set up VM templates and application designer but I cannot make my Excel to CI work, would anyone know what connect information, I tried the following and then try to connect as user VP1/VP1 and tried to open the VNDR_CI_EXCEL CI
     Web Server Machine Name:     10.44.11.18
     Protocol:
     HTTP Port:     8000
     Portal:     EMPLOYEE
     PeopleSoft Site Name:     TESTDB
     Node:     PT_LOCAL
     Language Code:     ENG
     Chunking Factor:     40
     Error Threshold:
     Action:

Naish wrote:
     PeopleSoft Site Name:     TESTDBAre you sure it is not ps ?
     Node:     PT_LOCALAre you sure ?
Nicolas.

Ask the Expert : Initial Set Up and LAN Connectivity for Cisco UCS Servers

Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about related to the initial setup of UCS C & B Series which include LAN connectivity from the UCS perspective with Cisco subject matter expert Kenny Perez.
In particularly, Kenny will cover topics such as: ESXi/Windows installations, RAID configurations (best practices for good performance and configuration), VLAN/Jumbo Frames configuration for B series and C series servers, Pools/Policies/Upgrades/Templates/Troubleshooting Tips for blade and rack servers, Fabric Interconnects configuration, general compatibility of Hardware/Software/drivers amongst other topics
Kenny Perez is a technical leader in Cisco Technical Assistance Center, where he works in Server Virtualization support team. His main job consists of supporting customers to implement and manage Cisco UCS B series and C series. He has background in computing, networking, and Vmware ESXi and has 3+ years of experience support UCS servers and is VCP certified.
Remember to use the rating system to let Kenny know if he has given you an adequate response.
This event lasts through October 10th, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi,
Actually we have UCS 6248 fabric interconnect - first twelve ports are enabled and same in Cisco UCS Manager.
But when more port will be active by expansion module then UCSM can manage that too or need any other licence for UCSM too?

I am purchasing a macBook Pro. I want to set up a wifi connection for it. However, I have an old Power PC machine that I would also like to keep connected to the internet. Is there any way to do this without a lot of hassle?

Can I link an old Power PC and a new macBook Pro on a network so that the PowerPC remains directly connected to the internet and the new macBook Pro can have wireless capabilities?

jrglr wrote:
... Will one of the ports on the router still allow the G4 to connect to the internet?
Yes. Ethernet is simple. OS X constantly and relentlessly searches for any network connection it can find. Plug it in and it will work.
Are you considering the Linksys EA3500 or something similar? Get what you want but be sure to read its reviews first. In my opinion Linksys consumer grade products suffered after Cisco's acquisition of them, and their customer support went from poor to abysmal.
A genuine Apple AirPort Extreme Base Station is more expensive, but not much more so. Its advantage is the ability to be configured with AirPort Utility whereas other routers either use dedicated Windows software or a browser interface. Read its reviews too then decide for yourself.
If you already have an Ethernet switch the additional port of the EA3500 is superfluous. You could just as easily use the less expensive AirPort Express, $99 before discounts. It has almost all the features of the Extreme including simultaneous dual band wireless, and in addition can also stream iTunes music to remote speakers through its audio port. The major difference between the Extreme and the Express is the latter's lack of additional LAN ports, so just use your switch.
All AirPort Base Stations support printing through their USB port, and all are guaranteed to be compatible with AirPrint should you ever need to.

WHY do we set up a RFC connection for workflows

Similar Messages

Maybe you are looking for