Why do we use SALV_WD_TABLE in ALV?

why do we use SALV_WD_TABLE in ALV? I was using this in Used Web Dynpro Components.

The web dynpro component SALV_WD_TABLE is used for incorporating ALV into a web dynpro (screen). You would declare it as a used component and then embed it into the container of the view that should use ALV. I hope this helps.
- April King

Similar Messages

Why do we use cl_gui_cfw= flush method in Object Oriented ALV programming

Dear Friends,
Please solve my query regarding control framework. Why do we use cl_gui_cfw=>flush method in Object Oriented ALV programming. I studied and found that this method transfers automation queue to Front end. But I could not find any further update on this.
Thanks & Regards
Amit Sharma

Generally this is to restrict the traffic b/w frontend and backend. This means that every operation in Control Framework should be first buffered in the backend and synchronized with the frontend at certain points (one of this point is calling synchronization method cl_gui_cfw=>flush ). This explicit order of synchronization is due to RFC call needed for every communication b/w front/back end. So to avoid to many RFC calls we do it only at certain time.
Please refer [Automation Queue|http://help.sap.com/saphelp_wp/helpdata/en/9b/d080ba9fc111d2bd68080009b4534c/frameset.htm]. I think it explains the concept quite well.
Regards
Marcin

Hi guru's how we can use oops in ALV & why can u explain to me plz

hi guru's how we can use oops in ALV & why can u explain to me plz

hi, chk these links and also the sample programs below for clear idea on ALV_OOPS:
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://www.sap-img.com/abap/what-is-alv-programming.htm
http://www.sap-img.com/abap-function.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
http://www.sap-img.com/abap-function.htm
Classical ALV:
http://www.geocities.com/mpioud/Abap_programs.html
OOPS ALV:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
Also,
REPORT YMS_HIERSEQLISTDISPLAY .
Program with FM REUSE_ALV_HIERSEQ_LIST_DISPLAY *
Author : Michel PIOUD *
Email : [email protected] HomePage : http://www.geocities.com/mpioud *
TYPE-POOLS: slis. " ALV Global types
CONSTANTS :
c_x VALUE 'X',
c_gt_vbap TYPE SLIS_TABNAME VALUE 'GT_VBAP',
c_gt_vbak TYPE SLIS_TABNAME VALUE 'GT_VBAK'.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max. "#EC NEEDED
PARAMETERS p_max(02) TYPE n DEFAULT '10' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_2 FOR FIELD p_expand. "#EC NEEDED
PARAMETERS p_expand AS CHECKBOX DEFAULT c_x.
SELECTION-SCREEN END OF LINE.
TYPES :
1st Table
BEGIN OF ty_vbak,
vbeln TYPE vbak-vbeln, " Sales document
kunnr TYPE vbak-kunnr, " Sold-to party
netwr TYPE vbak-netwr, " Net Value of the Sales Order
erdat TYPE vbak-erdat, " Creation date
waerk TYPE vbak-waerk, " SD document currency
expand TYPE xfeld,
END OF ty_vbak,
2nd Table
BEGIN OF ty_vbap,
vbeln TYPE vbap-vbeln, " Sales document
posnr TYPE vbap-posnr, " Sales document
matnr TYPE vbap-matnr, " Material number
netwr TYPE vbap-netwr, " Net Value of the Sales Order
waerk TYPE vbap-waerk, " SD document currency
END OF ty_vbap.
DATA :
1st Table
gt_vbak TYPE TABLE OF ty_vbak,
2nd Table
gt_vbap TYPE TABLE OF ty_vbap.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
v_2 = 'With ''EXPAND'' field'.
START-OF-SELECTION.
Read Sales Document: Header Data
SELECT vbeln kunnr netwr waerk erdat
FROM vbak
UP TO p_max ROWS
INTO CORRESPONDING FIELDS OF TABLE gt_vbak.
IF NOT gt_vbak[] IS INITIAL.
Read Sales Document: Item Data
SELECT vbeln posnr matnr netwr waerk
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE gt_vbap
FOR ALL ENTRIES IN gt_vbak
WHERE vbeln = gt_vbak-vbeln.
ENDIF.
PERFORM f_display.
Form F_DISPLAY
FORM f_display.
Macro definition
DEFINE m_fieldcat.
ls_fieldcat-tabname = &1.
ls_fieldcat-fieldname = &2.
ls_fieldcat-ref_tabname = &3.
ls_fieldcat-cfieldname = &4. " Field with currency unit
append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
ls_sort-tabname = &1.
ls_sort-fieldname = &2.
ls_sort-up = c_x.
append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
ls_layout TYPE slis_layout_alv,
ls_keyinfo TYPE slis_keyinfo_alv,
ls_sort TYPE slis_sortinfo_alv,
lt_sort TYPE slis_t_sortinfo_alv," Sort table
ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat TYPE slis_t_fieldcat_alv." Field catalog
ls_layout-group_change_edit = c_x.
ls_layout-colwidth_optimize = c_x.
ls_layout-zebra = c_x.
ls_layout-detail_popup = c_x.
ls_layout-get_selinfos = c_x.
IF p_expand = c_x.
ls_layout-expand_fieldname = 'EXPAND'.
ENDIF.
Build field catalog and sort table
m_fieldcat c_gt_vbak 'VBELN' 'VBAK' ''.
m_fieldcat c_gt_vbak 'KUNNR' 'VBAK' ''.
m_fieldcat c_gt_vbak 'NETWR' 'VBAK' 'WAERK'.
m_fieldcat c_gt_vbak 'WAERK' 'VBAK' ''.
m_fieldcat c_gt_vbak 'ERDAT' 'VBAK' ''.
m_fieldcat c_gt_vbap 'POSNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'MATNR' 'VBAP' ''.
m_fieldcat c_gt_vbap 'NETWR' 'VBAP' 'WAERK'.
m_fieldcat c_gt_vbap 'WAERK' 'VBAP' ''.
m_sort c_gt_vbak 'KUNNR'.
m_sort c_gt_vbap 'NETWR'.
ls_keyinfo-header01 = 'VBELN'.
ls_keyinfo-item01 = 'VBELN'.
ls_keyinfo-item02 = 'POSNR'.
Dipslay Hierarchical list
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-cprog
i_callback_user_command = 'USER_COMMAND'
is_layout = ls_layout
it_fieldcat = lt_fieldcat
it_sort = lt_sort
i_tabname_header = c_gt_vbak
i_tabname_item = c_gt_vbap
is_keyinfo = ls_keyinfo
TABLES
t_outtab_header = gt_vbak
t_outtab_item = gt_vbap
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_LIST_DISPLAY
Form USER_COMMAND *
FORM user_command USING i_ucomm TYPE sy-ucomm
is_selfield TYPE slis_selfield. "#EC CALLED
DATA ls_vbak TYPE ty_vbak.
CASE i_ucomm.
WHEN '&IC1'. " Pick
CASE is_selfield-tabname.
WHEN c_gt_vbap.
WHEN c_gt_vbak.
READ TABLE gt_vbak INDEX is_selfield-tabindex INTO ls_vbak.
IF sy-subrc EQ 0.
Sales order number
SET PARAMETER ID 'AUN' FIELD ls_vbak-vbeln.
Display Sales Order
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDCASE.
ENDFORM. " USER_COMMAND
END OF PROGRAM Z_ALV_HIERSEQ_LIST ******************
hope this helps.
cheers,
Hema.

Why do I use my ipod as a camera when I lose precious photos even when I try to back up before an update! Selling my ipod at the first chance I get

Why do I use my Ipod tiuch as a camera when lose precious photos of my granddaughter every time there is an operating system update? Even when I try to back up the ipod, I can't find the pics etc on my pc. It is very annoying and I am seriously considering selling my ipod because of this. No warning is given that photos will be lost. So very disappointed in aple, lost all my music last time, as well as my pics.

Yes, using the windows photo capture application is how you get photos taken with the iPod onto your pc. You should store them there, and organize them in folders.
Create one main photo folder. Inside that folder create additional folders to hold photos. Each folder will become an album on an iPod, iPad, or iPhone. Do not next any other folders inside the first album folder.
Then start iTunes on your pc and connect your iPod. Select your iPod in itunes and select the Photos tab that will be ps enter. You will most likely have first find your main photos folder. Ten select to sync all photos from your pc or select only those albums you want to have on your iPod. The click on Apply or Sync. That will copy the photos to your iPod.
If you should do something later to cause these albums to disappear from your iPod you can quickly copy them back by doing another sync.

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

Why do we use open URL in default browser function? What are the uses of it?

Why do we use "open URL in default browser" function? What are the uses of it?

kdm7 wrote:
Okay.
So can we keep a web button to access the www.ni.com ? So that web site opens only when button pressed?
P.S I,m a newbie.
Yes, you can also, e.g. include a help file or manual as html and open that in the browser.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK

WHY CANT I USE FINAL CUT EXPRESS HD IN MY MACBOOK?

hey there DavoMrMac,
according to Apple's 'site:
System Requirements
Macintosh computer with 500MHz or faster PowerPC G4 or G5 (550MHz for PowerBook G4) or Intel Core Duo
512MB RAM
Display with 1024-by-768 (or higher) resolution
An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac Mini
Mac OS X 10.4.6 or later
QuickTime 7.0.4 or later
HDV features require 1GHz or faster processor and 1GB of RAM (2GB recommended)
500MB disk space required for applications; additional 16GB of additional storage space for Soundtrack and LiveType content (can be installed on separate disks)
DVD drive for software installation
i've been running FCE HD 3.5 on my MacBook since i got it in November '06. runs okay for the few short SD projects(15:00) or less i've put together.

I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!

''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Function module: why do we use FM and what is the purpose of using FM

hi,
   Can any please explain. Why do we use FM?
                                       What is the purpose of using FM ?
                                       Where we are using FM and for what tables in R/3 ?
I could be thankful to you if any one answer above questions.
Arun

Hi,
We go for creating FM when there is a chance of using the same code in different reports in R/3.
Suppose I have a requirement say, to display the Payer Name for every sale order.
This is most common requirement in any project.
You can create a FM say READ_CUSTOMER_NAME in SE37.
Write a select statement from the table VBAP to fetch the Payer Name based on the Sales Order.
Now you can activate the FM and it is ready to be used across all the reports in R/3.
Need : To avoid redundant coding and to modularize the code.
If you want to see the list of Standard FMs, got SE37 --> press F4 and you'll get all the SAP standard FMs.
For customized FMs (User defined), type Z* or Y* and press F4.
Hope this helps a bit !!!
Regards,
Balaji V

What is the significance of Marker interface? Why are we using, even though

What is the significance of Marker interface? Why are we using, even though it has no method?

Well, what's the significance of an interface? They can define a set of methods a class may implement but the class could equally well implement these methods without the interface so why having interfaces at all?
The answer is that the most important aspect of an interface is that it constitutes a type (you can declare variables of it). And it's a type regardless of how many methods it defines, including none. So the reason for having a marker interface is that you're interested solely in the type aspect of interfaces.

Why do we use dunning for vendors

Hi All...
We create dunning for customer to send them reminders for payment....But why do we use dunning for vendors (in Vendor Master Data)??
Txk,
Umesh

Hi,
If you dun customers who are also vendors and want to clear the items, the dunning program lists both the overdue customer items and the overdue vendor items in the dunning proposal, and determines a joint balance.When you dun a customer who is also a vendor, only the master record information of the customer is relevant.The items can only be cleared if the same dunning procedure has been defined in the standard dunning area for both customer and vendor.
Hope this helps you. let me know if you need anyother information.
Rgds
Manish
===========================================================================

Why do we use Allowed Operations in DML Process

Hello,
Why do we use Allowed Operations in DML Process ??
Can you please clear this confusion:
I am using apex 4.1. oracle 11g R2 SOE ...
Using the Wizard, I created a Form and IR on Dept Table...
In the form page:
- Create Button
The name is "CREATE"
NO Database Action
- DML Process
Allowed Operations: nothing is checked
This will insert a new row in the Dept table
In the form page:
- Create Button
The name is "CREATE2"
Database Action : insert
- DML Process
Allowed Operations: nothing is checked
This will insert a new row in the Dept table
So, What difference does it make if INSERT check box in Allowed Operations of DML Process is TICKED OR NOT ??
Regards,
Fateh

kdm7 wrote:
Okay.
So can we keep a web button to access the www.ni.com ? So that web site opens only when button pressed?
P.S I,m a newbie.
Yes, you can also, e.g. include a help file or manual as html and open that in the browser.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Why cannot I use hidden or display only item to store value for insert?

hi, Gurus:
I have a question:
I implemented a form with report region in a page, the update works OK, but the add function has a problem:
There is a column, offender_ID, which is a foreign key for another table, it should not be null during insert. However, even I pass the offender ID from master page when user click the create button, and it did shows in the form, it must be a text filed to insert successfully, why cannot I use hidden or display only item to store this value for insert? (If I use hidden or display only item, insert won't be successful, apex reports I tried to insert a null value to offender_ID column.)
Many Thanks in advance.
Sam

Hi,
There is a column, offender_ID, which is a foreign key for another table, it should not be null during insert. However, even I pass the offender ID from master page when user click the create button, and it did shows in the form, it must be a text filed to insert successfully, why cannot I use hidden or display only item to store this value for insert? (If I use hidden or display only item, insert won't be successful, apex reports I tried to insert a null value to offender_ID column.)I think both hidden and display items have attributes that can cause problems because of different ways these items function than non-hidden and non-display-only items function. Display Only items have a "Setting" of "Save Session State" Yes/No? That can be a problem.
Would you do this? Make these items regular items instead and see if you can get those working. Then, we will try to change the fields back to hidden or display only.
Howard
Congratulations. Glad you found the solution.
Edited by: Howard (... in Training) on Apr 11, 2013 10:26 AM

Why should I use Java

HI,
Someone asked me why are you using Java when you can use Visual Basic.
Well, I ask this question in this forum ?? why ...
please leave out the portablity part
--j

Well, here is my 2 cents, as it were. I tried learning VB, and found that while it is powerful, when it comes to designing specifically for Windows systems, I found it extremely hard to understand. When I first learned Java, it didn't take me long to understand the concept and relation of classes and objects, and I was writing Swing apps in no time. With VB, it wasn't that easy. Yes, it was mostly drag and drop and add a few lines of code, but I don't like that. I like to be able to get down into the code and see why it works the way it did, and with VB, I just couldn't grasp it. But with Java, it took me no time at all to be able to understand why it worked the way it did, and because of that, I will always choose Java over any other language, except maybe Miva Script, which is a server side language used for e-commerce websites. It was another language that was easy to learn. Does this mean I'm a lazy programmer, always taking the easy way out? Probably, but if it's easy for me to learn, it's easy for me to implement.
James

Why do we use SALV_WD_TABLE in ALV?

Similar Messages

Maybe you are looking for