Why does 3Dmark05 give me this error?

This is a version I got off Limewire and its not full retail. Its only a demo. Got this error:
IDirect #DDevice9:Present failed:Device lost(D3DERR_Divice Lost)
I have the latest drivers off the Nvidia website. What gives? Never used 3d05 before, but I was just testing my new ASUS hybrid card with various benchmarks to make sure things seem to be running right. I do get a posted score in 3dmark05, even though it kicks me out and zaps my screen temporarily to 800X600. 3dmark05, after clicking the ok buttun after the error message posts my score 3,106 which seems about right seeing that I have a slower system.
So far I have only benched this card, havent played any games for more then ten minutes. graphics seem better.Im not seeing the improvements in Far Cry that I though I would get from a 6800GT on full settings. I know this is a DDR128, but I just though things would be a smoother. Clarity is much better then the 9800pro and this card runs suppringly cool that 6600GT I tested was dangerously hot and I didnt want anything that hot in my case.
I dont think there is anything wrong with the card. I tested a 6600GT the other week and the this 6800GT hybrid did get me from 43K to 46K on Aquamark3. My 9800pro was at 41K with a slight overclock.....maybe I try some Farcrytests to see if that shows anything...
BTW I just was going to tell you have the latest drivers and was going to post the version, because after I got the card up and running I downloaded the latest from Nvidia.  Why does my Display Adapter when I click on properties say "7/9/2004" version "6.2.1.1"?....Now when I ran the driver update, it said it was updating the drivers and the drivers name they were version 9/13/05?

Quote
>It sounds like the version you got may be damaged. I would try getting the download directly from futuremark. The link >to download it is http://www.futuremark.com/download/?3dmark05.shtmlQuote
I tried it with another version of 3Dmark05 and got the same error. I also noticed it does it during the CPU test where it tries to make the CPU think its a GPU. I found this:
http://msdn.microsoft.com/archive/default.asp?url=/archive/en-us/directx9_c/directx/graphics/programmingguide/gettingstarted/devices/lostdevices.asp
I also checked around the net. Seems like there are two reasons for this "lost" error. A resident program pissing 3dmark05 or a voltage issue....I havent had any problems with my system and only have then with 3dmark05. This is with a new version of 3dmark05 and newest drivers installed after Driver Cleaner. SO I still dont know whats up....Again it only does it durring the CPU test for 3Dmark05 and in particular always errors out right when the monster is emerging from the water During the zepplin test.
Quote
>As far as the jump is scores, that does not seem like enough going from the 9800 to the 6800. I was able to play >FarCry on my machine will ultra settings with my 9800 (but no anti-aliasing or ansiotropic filtering). And only going from >41k to 46k with aquamark also seems low. Did you use a drivercleaner to fully remove your ATI drivers? If not I would >remove both the NVidia drivers and get the cleaner and clean both ATI and NVidia drivers off of the system and >reinstall your NVidia drivers.Quote
In my previous post I noted that I was only using the ASUS drivers dated 4/05. Well I went back and used Driver Cleaner then tested. The scores were about the same, but gameplay and visuals were much smoother as I would expect from a card like this. I though that was odd given I had  pretty much the same scores(meaning Aquamark stayed the same and 3dmark went up about 300 points). I then went back to Nvidias site and got the newest drivers and they loaded right this time
Aquamark: increased 1,000 overal to a solid 47,000-47,500  (I was getting 41K with 9800pro,XTbios OC)
3dmark03: 9608 (from 9137)
3dmark05: same score no changes (as noted above still errors out at CPU test)
Thanks for the input I am VERY happy to be running solid 47000-47500 Aquamarks where as before I was runnign 45500-46000 with driver issues. I not as familiar with 3dmark scores and how the differences pan out when playing games. But you mentioned that My scored seemed low. Is this 47,500 more like what you thought? Also remember the card that I have is a 16,6 6800 GT but has 1ddr128. In this review this guy only gets for 3Dmark03 10,290(vs my 9,608) but he has a 64 bit system. In another review using 3Dmark05 the guy gets 3,838 vs my 4,060 Here the card with some scores:
http://www.digit-life.com/articles2/gffx/nv40-11.html
http://www.ap0calypse.com/showthread.php?t=1287
Things of note:
1.) Graphics seemed less chopy by just using driver cleaner, but scored stayed about the same.
2.) After gettting the latest drivers too. Aquamark showed a significant change, yet 3d05 stay the same
3.) Question Driver Cleaner said to "empty the recycle bin" while in safe mode. I couldnt do this. How do I do that?
4.) All this with the 1.3 Far Cry patch makes the game much nicer. I can do Full Blast settings, but there is some screen rippple every 15 seconds or so. Not to bad, But not flawlwss like a 64 bit system.

Similar Messages

  • Why does iPhoto give me this error when opening it " Your photo library is either in use by another application or has become unreadable"

    Good Day. I have been trying to open my iPhoto and i keeps giving me the following error message " Your photo library is either in use by another application or has become unreadable " Then it suggests I push the Option and Command button at time of opening iPhoto and the 4 options given do not work as well. My operating system is OS X Vers 10.8.5. Not sure the iPhoto application as it won't open for me to tell.
    Pls help . Im afraid of losing all my pics.

    Make a back up now. If you have any vaule in Your photos always have a back up.
    Most Simple Back Up
    Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
    Slightly more complex:
    Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
    In Library Manager the Rebuild command is under the File menu. There's also an excellent Help available.
    Regards
    TD

  • HT5937 why does xcode give me an error than says "exited unexpectedly lost connection" when i put in a cin input in c++

    .

    First have you tried the program from the terminal? It works there correct?
    What kind of keyboard do you have, a wireless or a full keyboard with numeric keypad?  After doing a search I hove found that the problem seems to be with using the Enter key in Xcode rater then the Return key.
    The full keyboard with the numeric keypad has both an Enter and Return key. The Enter key is part of the Numeric keypad the Return key is part of the alpha kneeboard. Try using the Return key.
    On the wireless keyboard (which I have)  normal function of the key is Return but if you hold the function it sends Enter. If I run this code in Xcode and press the function to send a Enter I get the error.
    In the terminal either key works fine so it is some weirdness in Xcode. Just use the Return key and you should be ok.
    regards

  • Why does PSE4 give me an error message when trying to download

    I used to have this installed on my older mac mini 10.6.8 and it worked fine, then my computer was getting slow, so I had it wiped and everything reinstalled so it works again, but now I can't put photoshop elements 4 back on it. Also, when I try to install it on my newer mac mini 10.9.3, it says the same thing. I have 2 different copies of my elements, so I know it's some sort of setting on my computer. I changed the proxies and unchecked everything, but it still didn't work. I'm at a total loss, please help. I can't afford to get any new software.
    thanks!
    by the way, this is the error message that I get every time!

    I have absolutely no idea how you ever got it to run in 10.6 at all. PSE 4 stopped being able to be installed back around 10.4 and stopped working altogether in 10.5. It was never compatible with 10.6 unless you were also running something like sheepsaver. It cannot possibly be installed in 10.9. You need a newer version. PSE is up to PSE 12, but versions 6 and up are compatible with 10.9, at least so far. The more recent the version you upgrade to, the longer it will work.

  • Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50). Everytime I try to sync my phone?

    Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.

    What operating system do you have on your computer?

  • Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

    Question
    why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

    See also "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    *https://support.mozilla.com/kb/Firefox+hangs

  • Web-Disk on OSX 10.9 Give me this error: "Finder got an error: Network file permission error."

    Previously I was using OSX 10.8 and Web Disk was working great.
    Since I upgraded to OSX 10.9 Web Disk Dont Attach to my compputer and give me this ERROR:
    FInder got an error: Network file permission error.
    When I got this ERROR first time I searched GOOGLE and found this link: http://cammodude.blogspot.no/
    And I did:
    To force all connections to be SMB1:
    Open A terminal window
    paste in the following line followed by the return key(should be all on one line): 
    echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
    What the command does:
    Creates a file called nsmb.conf  in your  home directory at the path ~/Library/Preferences/nsmb.conf.
    Adds directives to force SMB connections to use the SMB1 protocol.  This is slower but stable.
    Then I could use Web Disk on OSX 10.9 after executing this command in Terminal.
    But now I restarted my Macbook and now Im NOT able to connect to Web Disk and get the same ERROR.
    FInder got an error: Network file permission error
    After trying 100 times it attaches 1 time but then show this ERROR:
    Can't get <<class cdis>> "my.server.com/2078" of application "Finder".
    If this happen then I can see the files in Finder and see the Contents and Size of files but if I open a PHP file in BBEdit then it shows BLANK.. But actually it is NOT blank.
    Now Im stuck How can I solve this? All help is highly appericated..
    Thank you so much...

    Hi,
    Make sure to chmod the app, something like this :
    chmod -Rf 777  secure_site_WebDisk.app
    (in my case the CPanel provided the app for my OSx version.)

  • I have a local LAN DNS server. My preferences point to that server. Why does dig give me 8.8.8.8 as my DNS server?

    I have a local LAN DNS server. My preferences point to that server. Why does dig give me 8.8.8.8 as my DNS server?
    Something is/was modifying my DNS preferences to 8.8.8.8 It seems to be pointed correctly now (at my local LAN DNS server), but why was it pointed at 8.8.8.8 before? I never want it pointed to 8.8.8.8

    You've hit the nail on the head Ben.  For point to point communications, the IP addresses should be fixed, therefore there is no need for DNS.  If a DNS is configured, the NIC (Network Interface Card) drivers will try to contact it.
    In my test system, I need DNS for the test computer, but I am communicating with a dedicated Spectrum Analyzer over TCP/IP.  So I added a second NIC.  The main NIC is configured for DNS and all that jazz.  The second NIC (plugged into PCI slot) is configured with a hard coded address, no DNS, no Gateway, nothing else.  I connect that NIC to the spectrum analyzer using a crossover cable.  The analyzer is configured with a hard coded address also.  Now my computer can get on our company network, and the spectrum analyzer is isolated from the network, so it can't catch any viruses, etc., and it still talks to the computer.  When using a configuration such as this, it is best to use a dedicated address for the 2nd NIC and spectrum analyzer in the range of 192.168.100.0 to 254
    - tbob
    Inventor of the WORM Global

  • HT201250 My Time Machine is not backing up and gives me this error report, 'The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use.  Time machine could not complete backup.    Can anyone help me?

    My Time Machine is not backing up and gives me this error report:
    The backup disk image "/Volumes/Data/Valarie'siMac.sparsbundle" is already in use
    Time Machine could not complete backup
    Can anyone help me?

    Look at the discussion on the following forum:
    https://discussions.apple.com/thread/3882138?start=0&tstart=0
    The responses given there may help.

  • Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

    Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • How use page Fragments(give me this error symbol  : class Hyperlink )

    hi master
    sir
    i am try to this link sample for page fragments
    http://developers.sun.com/jscreator/learning/tutorials/2/pagefragments.html
    every setp is right but when i use this code
    Hyperlink homeLink = navigationFragmentBean.getHomeLink();
    this line give me error
    see error
    symbol : class Hyperlink
    location: class fragmentexample.Page1
    Hyperlink homeLink = navigationFragmentBean.getHomeLink();
    1 error
    please give me idea how i remove this error
    thank's
    aamir

    hi master
    sir use mysql database
    I have three textfield in my page and one button.
    All texttfidld are bound with datasourceprovider or bound with mysql and I use normal code in button event
    getMfatableDataProvider().cursorNext();
    also I drop page fragment box tool and create new fragment in my application but when I run my page and click the button first record move to next record and again I press button then page give me this error
    when I run my project then in browser address show this
    http://localhost:29080/mfamove/
    first time when I press button record move to next record and browser show this address
    http://localhost:29080/mfamove/faces/Page1.jsp;jsessionid=12a66ea53657ffffffffcb77c9939bc5aa0
    second time I press button then browser show this address
    http://localhost:29080/mfamove/faces/Page1.jsp
    and page show this error
    Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
    Exception Details: javax.faces.el.MethodNotFoundException
    textField1_processValueChange: mfamove.Page1.textField1_processValueChange(javax.faces.event.ValueChangeEvent)
    Possible Source of Error:
    Class Name: com.sun.faces.el.MethodBindingImpl
    File Name: MethodBindingImpl.java
    Method Name: method
    Line Number: 206
    Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    com.sun.faces.el.MethodBindingImpl.method(MethodBindingImpl.java:206)
    com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:124)
    javax.faces.component.UIInput.broadcast(UIInput.java:492)
    javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
    javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:343)
    com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:585)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
    org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
    com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
    com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
    com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
    com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
    Please give me idea how I use record navigation
    Thank�s
    Aamir

  • Why does the Safari message "This is a non-secure form" pop up everytime I try to use yahoo mail?

    Why does the Safari message "This is a non-secure form" pop everytime I go into yahoo mail?  If I don't press the send option my whole computer freezes.

    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
    If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

  • I am installing Adobe Acrobat on a Mac with OSx Mountain Lion - gives me this error DW006 any ideas?

    I am installing Adobe Acrobat on a Mac with OSx Mountain Lion - gives me this error any ideas?
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Acrobat Professional: Install failed

    No there is not enough information in this snipped of your installation log.  Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review the installation log in it's entirety.

  • TS1424 Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

    Whenever i purchase or download an app on the app store , it always gives me this error message " unable to purchase at this time, please try again later"

    JUst experienced the exact  same problem after changing password.Getting same message. Hope someone has an answer for this.

  • I received error code (-50) when trying to restore my iPad. Does anyone know what this error code means?

    I received error code (-50) when restoring my iPad2. Does anyone know what this error code means and how to fix it?

    See the  More Like This  Section on the right...

Maybe you are looking for

  • Please support the Korean language

    hi. I'm using the photoshop touch 1.7.5 in android 4.4.2. but i can't see the Korean language in file explorer of ps touch and can't input  korean text.(Chinese and Japanese language is possible.) why? please support the Korean language.

  • Lightroom 4.3 problems, filmstrip and crop tool

    I am noticing some issues in Lightroom 4.3.  Can you please tell me how to have picks and ratings appear in the filmstrip.  I have this selected in Preferences and previously was able to see picks and ratings. Also, when I crop an image now, I am una

  • Connector params for ABAP Sneak peview

    Hi, I am trying to create a System in Portal ( Sneak Preview 7.0) to connect to NW ABAP Sneak Preview 2004 which is installed in the same machine. I created a 'SAP Dedicated application server' system and created an alias. When I do the Connection te

  • HT5503 Every time I try to download the iOS 6 update on my iPhone 4 it tells me there us an error ????

    Every time I try to download the iOS 6 upgrade it just tells me there is an error idk why I've tried almost everything I could think of

  • Error:while doing PGI in STO getting error

    Dear sir, while doing pgi in sto i m getting this error and i tried in obyc setting is there is there any other option to solve this isssue. Account determination for entry CAIN AUM ____ ___ 7920 not possible regards, Debesh