Why does a calendar event goes out as an Email not an event in Outlook 2010

When I try to enter into my bosses calendar the events do not go in as an appointment, but instead they are sent via email. Any clue?

Hi Gaurav,
Question 1>
As far as I have knowledge about the Surveys need to be sent to both internal and external servers outside a company's network. In order to view the survey details/page outside network the following servers have to be setup.
Question 2 >
For sending out Campaign Id's to business Partners use the Campaign execeution/Automation scenario, wherein
Mail forms with surveys/questionaires can be attached to Campaigns and executed/scheduled accordingly.
Question 3>
In order to debug the survey you can put a breakpoint in Function module "CRM_MKTCA_SURVEY_MKT_PBO".
Hope the information provided answers your query.
Regards,
Anup

Similar Messages

Why does the sound keep going out on my ipad? It seems to just go out in between sleep/wake sessions.

Why does the sound keep going out on my ipad? It seems to just go out in between sleep/wake sessions.

Hello stephiejoy,
Thanks for using Apple Support Communities.
The following support article will help you in resolving this issue your iPad is having with its audio. Even though this article states it's for an iPhone, the same troubleshooting steps do apply to your iPad as well.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Take care,
Alex H.

Why does the sound keep going out?

The sound keeps going out for everything: iTunes, any website which has audio, even the volume buttons on my keyboard. I notice that when I restart my computer it will work temporarily, maybe 10-15 minutes and then will go out again. This just started happening and I'm not sure what is going on. Please help!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why does embeded .swf file goes crazy in IE but not in other browsers?

hi everyone
I'm building a SharePoint page with an embedded .swf file that is capable of detecting the current URL to activate and show content. Everything goes smoothly in all the browsers I've tested it except IE. When I open the SharePoint page in IE the .swf just reproduces the frames non stop, It completely ignores my scripts and I cant find anything that could be responsible of this. besides the url detection script, i just have simple button configuration for the timeline and general stops.
any idea?.....anyone?

Normally when swf's play differently for different browsers it is due to the embedding code used in the html page.

Why is it when you set a calender event in outlook 2010 (in UK) with a reminder alarm for 30mins prior) and have the iphone set to keep the appointment time relative to the local country time that you travelled to, the alarm time is still at uk time ?????

why is it when you set a calendar event in outlook 2010 (whilst i am in UK) with a reminder alarm for 30mins prior to the appointment time) and have the iPhone set to keep the appointment time relative to the new country time that i have travelled to (this works OK), the alarm time is still relative to the UK time and not in sync with the local country time like the main appointment is.
Does anyone know the answer please.

This has to do with the Time Zone Support selected in your phone. If you check in Settings>Mail, Contact, Calendars, there is a setting for Time Zone Support at the bottom of the page under Calendars. If that is turned to off, the calendar should support the local time. Because time is set to Automatic (since you say the time is correct on the iPhone), it is reflecting the local time. That information comes from the carrier, not the iPhone itself. You can check, however the iPhone says that if you turn off the Time Zone support, it should reflect in the local time. Do a test, if possible, and see if that will do what you are asking.

Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

TS3999 why does the calendar delete past events?

why does the calendar delete past events?

Hello 123Giblet,
The iPhone has a setting for how long a past event will appear in your calendar. I found steps to help you change this setting in the iPhone User Guide:
Calendar settings
There are several settings in Settings > Mail, Contacts, Calendars that affect Calendar and your calendar accounts. These include:
•Syncing of past events (future events are always synced)
•Alert tone played for new meeting invitations
•Calendar time zone support, to show dates and times using a different time zone
When you tap on Sync, you will be given several options for how long you want past events to stay on your iPhone, and there is also an option to select All Events so that they remain on your calendar. You can find this information on page 69 of the iPhone User Guide
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Why does my macbook pro "goes to sleep" when charging?

Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
I read from threads that it is a logic board problem....How do I solve this problem?

Try an SMC reset. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

Why does my network connection time out when downloading iphone 4 software update?

Why does my network connection time out when trying to download iphone4 software update?

I'm having the same problem too. I cannot sync or update over wireless or wired connections ever since I installed the most recent iTunes update. iTunes goes through the complete OS 5.0.1 download only to tell me the connection has timed out just when it seems ready to install. I've since reinstalled iTunes, I've ejected and done hard restarts on both my problem devices. I've disabled anti-virus, anti-malware, and firewall. No change in outcome except that, after doing all this, my final attempt to simply sync my 1st Gen iPad led to iTunes crashing and being automatically closed by windows just before finishing the final step. Is this a cruel joke, because I'm certain I can hear iTunes laughing at me for wasting so much time on this.
Windows 7, 64-bit
iPhone 4 with iOS 5.0
iPad 1 with iOS 5.0

Why does the iPad 2 run out of memory

Why does the iPad 2 run out of memory?

First ...read deggie's response. Makes sense - even a computer running a large amount of RAM can run short on memory depending upon the operation you are performing so sometimes you have to do what is available to "clear" the memory.
You can ...close apps and restart the iPad on occasion. You close apps by double tapping the home button to bring up your recent apps in the multitasking tray. Tap and hold down on any of the icons until they all begin to wiggle. Then tap the minus signs in the corner of the apps to close them. Close all of your apps in that area. Also take note of how many apps are down there. That may have something to do with why the iPad is running out of memory. Tap the home button twice to return to the home screen. Then restart your iPad by holding down on the sleep button until the red slider appears and slide to shut off. To power up, hold the sleep button until the Apple logo appears and let go of the button.
If you do this once in a while, it may make a difference in how your iPad performs. In any event, it will not hurt anything.

HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason? I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL. it is WIFI and internet via AT&T??? Can you h

Can anyone help me? Why does my ipad kick me out of FB? Sometimes to the 'settings' page and sometimes to the desk top? I would like to know why this happens and what I can check or change to make it stop. I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL. It is WIFI and internet via AT&T? Can anyone give me some clues on what to do; or change in settings??? Thank you very much!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Why does my Macbook keep going to sleep every 10-20 secs!

why does my Macbook keep going to sleep every 10-20 secs when first turning on then it seems ok after about 10 mins ? This has only happened since upgrding to Lion 3 days ago, it's driving me mad!

You are most welcome

Why does that entire thread goes to sleep when we put a wait function in time critical loop?

why does that entire thread goes to sleep when we put a wait function in time critical loop but not when it is not time critical

Norbert B wrote:
Ujjval,
in a RT system, priorities have (in general) increased effect on the execution of the application.
It is recommended that you only have a single task in your RT program at "time critical". If you have two task "time critical" (that means you are running into issues caused by your quoted "feature"), you have a flaw in your application architecture.
Since LV 7.1, it is recommended to work with Timed Loops in order to prioritize tasks on a RT system. Timed Loops are executed on priorities between "time critical" and "above normal". Each Timed Loop will execute its content in a single thread in order to keep a good overview of the timing (like finished late [i-1]). Using those structures (and according settings) in a reasoned manner will prevent your RT system to run into priority issues.
Ujjval Shah wrote:
[...]also i would really appreciate if i can get more documentations regarding how LV creates threads and assigns subvis to them[...]
You will have a real hard time to go into this very deep. This is the feature of LV: you can just use multithreading (multicores) without the needed knowledge of scheduling and load balancing. This makes LV programming in general very easy in comparison to e.g. ANSI C (in regard of multithreading). So creation of threads, distribution of tasks to the threads are abstracted and most often not visible to the programmer.
There are some switches and levers you can "play around" in order to make LV to behave differently in this matter. But this most often requires deep LV knowledge and cannot be explained in a simple posting.....
hope this helps,
Norbert
Amen to that!
The question can not be fully answered without digging into the internals of the OS LV is run on because LV works with the OS and lets it do the scheduling.
Yes that note applies to pre- LV 7 RT. When run under RT the ONE Time Critical loop was guarenteed to stay determinisitic.
Since then the Timed Loop was introduced that allowed multiple levels of priority and later allowed us to assign which CPU the code would run on.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Why does my internet keep cutting out since i downloaded lion

why does my internet keep cutting out since i downloaded lion please can someone help ?

Reset: hold down the home button along with the power button until you see the Apple, then let go.

HT2341 why does my sound icon grey out and doesn't allow me to make changes on the system settings

why does my sound icon grey out and doesn't allow me to make changes on the system settings

When you go to System Preferences > Sound what does it say for Output? Have you had headphones plugged in? Sometimes the headphone jack gets stuck thinking it has something plugged in when there isn't anaything there. SMC also has something to do with Sound:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

Why does a calendar event goes out as an Email not an event in Outlook 2010

Similar Messages

Maybe you are looking for