Why does a song not return to the same place when I close it?

Recently, for some reason, when I have a song open and press 'my songs'  (which effectively closes the song) the song doesn't return to its usual location on the screen/folder. Instead it cues to the top left hand corner, and likewise with every other song, the same thing happens.
It's only just started doing this which makes remembering what is where even more difficult.
Any help much appreciated.

You are welcome, Nick. Don't worry about the "é" - it will depend on your keyboard, if it is easy. On my keyboard I type first the accent ´ and then the e, and all is done

Similar Messages

  • Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

    In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

    Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

  • My old PC, when scrolling through bookmarks and clicking, would return to the same place when opening bookmarks again. My Mac, book marks always open at the top of the list. Can this be set like my PC?

    The PC, (Sony Vaio) if i scrolled half way through my bookmarks and clicked on one, if i returned to bookmarks it would open in the same location from where i clicked previously.
    The Mac, every time i open my bookmarks, it opens at the top of the list.
    Can this be adjusted to work like my old PC?
    Thank you.

    Please see the Back button as depicted in this snapshot...
    Thanks
    Andaleeb

  • My Itunes library is skipping some songs which is also affecting my ipod, it is always the same songs that skip at the same place, it is not all songs.

    Since moving my Itunes to a Vista, it found songs that I downloaded a long time ago and added them to my library but now some songs (not just the ones that were lost in apple land) are skipping after playing a few seconds then it moves onto another song.  The same songs are skipping at the same place when played on a computer and also my ipod.

    i noticed this as a bug in iTunes. make sure the correct file is selected in the preferences menus. It does not have to be the default location directiory as Vazandrew stated. your iTunes music library can be anywhere you want it. i have mine on an external cuz i'm a dj and have over 80,000 songs.
    once you select/verify the location of your music library, simply drag the folder into the left panel in iTunes from a finder window. iTunes does not automatically add the items like it use to for some reason.

  • HT204370 why does my video and sounds not play at the same time when watching movies

    why does my video and sounds not play at the same time when watching movies

    Welcome to the unity.
    Upon which device are you watching your movies and are you using a home theatre system for your audio.

  • Why does ichat video not connect?  The error message says we did not respond.

    Why does ichat video not connect?  The error message says we did not respond.

    Hi,
    iChat uses several port as they are called over the internet to do different things
    Text Chats and Video Chats are on different Ports.
    You probably don't have the port open.
    Use UPnP in your router if it has it.
    8:59 PM      Sunday; August 12, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • WHy does my iPhone not show up in my iTunes when I plug it in?

    WHy does my iPhone not show up in my iTunes when I plug it in?

    It could be for any number of reasons. Since you do not identify the computer OS you use, here is information for both.
    Windows:     http://support.apple.com/kb/TS1538
    OSX:     http://support.apple.com/kb/TS1591

  • HT2045 audiobook stalls in the same place when listening to headphones. Will play if hooked to computer.

    some audiobooks skip to the next book in the same place when played on headphones. However when hooked to the computer it plays normally.

    http://dvdstepbystep.com/faqs_3.php
    http://dvdstepbystep.com/faqs_7.php
    BTW m2v is more compressed than DV
    Sounds like bad media or high rates.
    http://www.digitalfaq.com/media/dvdmedia.htm
    As suggested try different media (Memorex is not very popular around here, Verbatim more for +R, Taiyo Yuden are recommened, -R usually) and test on a few players. Cheap players can drive you nuts. Good for testing but you will get some that start going bad quickly. Of course when you can get a DVD to run on bad players it is a good sign...but...

  • Why does Apogee Jam not work with the Ipod Touch 4G

    Hi,
    I have a Apogge Jam an it works fine with my Mac Book, but it does not seem to be compatible with my Ipod Touch 4g.
    Only the Gibbson L&M app recognize the Apogee Jam, but no other App (Ampkit, ....) :-((
    With the IPhone 4 it shall work, can tell me anybody why Apogee Jam is not compatible with the Ipod Touch 4g (
    although the Gibson-App works)?
    Is there perhaps still other Apps which work with the Ipod Touch and Apogge Jam?
    Thanks
    Michael

    I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5.  If this app can do it, then one would presume the other apps could be updated to do it also.
    From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
    Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM.

  • Browser REFRESH button does not return to the same iView/Page

    Hi,
    In SDN site I have seen that in whichever menu i am in, if i use the browser refresh button i return to the same page. But this does not happen on my enterprise portal.
    Can you please let me know, how to set / configure the enterprise portal EP7 such that, if am in any iview and use the browser refresh, then i am returned to the same iview / page and not to the first page of the menu. Currently in my portal, when i hit the browser REFRESH button, it takes me to the first page/iview.
    Thanks,
    Anirban

    Dear Romano,
    Thanks for your reply. With the help of the document link that you have provided, i have been able to achieve my target partially. Currently i am able to refer to the iView and Role directly using the QuickLink and when i access that particular iView & Role using the QuickLink and then do a refresh, the same screen appears. This part is working fine. But i have one issue.
    But generally a iView/Role is accessed not via the QuickLink on the browser but by clicking on the Role on Navigation Level 1. Even though this Role has a QuickLink, it is not visible in the address bar since the QuickLink URL was not used for reaching the Role. In such a situation, when we press the REFRESH button, the iView / Role is vanished and the browser returns to the first default page of the portal.
    Can we somehow make it such that whenever the Role is accessed in the Navigation Levels, it can be accessed via QuickLinks and the QuickLink URL is displayed on the address bar ? If this can be achieved, then i guess the problem will be solved.
    I hope i have been able to get across my point. Hoping to hear a positive reply from your side.
    Thanks in advance.
    Regards,
    Anirban Kundu.

  • Why does my Blog not publish with the rest of my new pages and photos????

    Much more work was done on my iWebsite today and I even made a rudimentary beginning of a blog.
    QUESTION:
    Why does my blog not publish?
    Lorna in Southern California

    James, the blog is on Safari now. I am embarrassed to say that I had already forgotten that I needed to make a link to the Site Menu. Since I had done all of that in a tear of activity previously, it's as though the process did not stick in my head. Sort of like forgetting to plug in the computer. 8-(
    I did not even realize what I had done wrong until I made a hyperlink from that site to my site menu and checked to see that the blog became visible. It's disconcerting to think that this kind of thing could happen to me again. 8-(
    I would be very interested in seeing people's blogs and how they use them. I've seen blogs used as news reports, blogs with music videos, blogs with photos. I earlier thought that a blog was like a diary: Words only.
    Lorna in Southern California

  • Why does Firefox try to launch Adobe and/or Quicktime when I close Firefox? What is it loading into those programs?

    When I shut down Firefox, it tries to start Either Adobe Reader, Quicktime, or both. It has done this ever since the first time I installed an used version 4. The applications do not actually launch, as in a window opening, but they are then present as a process in the system, and I have to close them from the Task Manager. It usually launches just one, but, if it's trying to launch one, and I use Task Manager to close it, it then launches the other. If I hurry and stop that one, Firefox reports that it messed up, and wants me to keep using the Internet for its own purposes that have nothing to do with what I was using the Internet for. This never happened under previous versions of Firefox. Do I need to revert to a previous version? I'm running Kaspersky Internet Security, and it shows I have no malware or the like on my computer, which could cause this. So, why is Firefox trying to do things I did not ask it to, and then expecting me to let it phone home to tell about it when I stop it. By the way, out of good practice, I often close down my Internet connection before closing Firefox, (in case I do get something like a Key Logger loaded, to prevent it from sending its final report before the cache is cleared), but this also happens when I have not yet closed my Internet connection before closing Firefox, so I do not think that is the issue, nor should it be. Your question below about when it happens does not provide for the answer "Every time Firefox Closes", so I picked the closest such answer.

    This can be caused by clearing the cookies via [[Clear Recent History]].<br />
    * Firefox/Tools > Options > Privacy > Firefox will: "Use custom settings for history" > [X] Clear history when Firefox closes > Settings
    You can try to exclude the cookies to test that.<br />
    You can let all cookies expire when you close Firefox to remove unwanted cookies and keep the ones with an allow exception.
    * Tools > Options > Privacy > Cookies: "Keep until": "I close Firefox"
    If you use [[Clear Recent History]] to clear the cookies when you close Firefox then Firefox also tries to clear the cookies from plugins like Flash and starts a plugin-container process for each plugin and possibly for each cookie (?) and that can add extra time if there are a lot of cookies to remove and also can cause an unresponsive script error to appear.

  • Why does my Videocast not appear in the iTunes Store

    Hello,
    i recently started an videocast and puplished it to iTunes, but until now you can only access the videocast by searching for it.
    Why does not it appear in the Store while Browsing through the categories or in the "New" segment?
    Below the feed for the videocast.
    itpc://www.veoh.com/rss/collection/Wiideocast
    Thanks in advance for your help
    M4dC0w

    Don't worry, this is a problem that I have experienced in submitting all of my podcasts, and I believe it all boils down to this.
    The people behind the iTunes Music Store only select a few of the new podcasts that they personally like to appear in the "New and Notable" section. This is why in your podcast name and episode names, you should try to include key words that sum up your podcast/vodcast. For example, my podcast is one which supplies various DJ mixes - so I make sure to call my podcast "House Music - Dirty, Filthy & Electro House DJ Mixes" so it has a higher chance of coming up when people search "music", "DJ" or "electro".
    I know it's annoying because to have your podcast or vodcast appear there would be very helpful in spreading the word about your podcast, but Apple just won't do it. I might suggest sending them an email asking how you would go about approving it for the "New and Notable" section, but I have never tried this so there's no guarantee of an answer, or even a reply.
    Hope this all helps. Good luck with the vodcast.

  • Why does my function not return anything when I create as a schema object

    I have user ABC who owns several tables some of which have foreign key constraints.
    I have user XYZ that has been granted access to all tables owned by user ABC.
    When I create a function as user XYZ using following I get no return when I issue:
    select XYZ.ztm_tables_depended_on('ABC', 'A_TABLE_OWNED_BY_ABC') from dual :
    Please see after function definition.
    CREATE OR REPLACE FUNCTION ZTM_TABLES_DEPENDED_ON(p_Owner VARCHAR2, p_Table_Name VARCHAR2) RETURN VARCHAR2 IS
      CURSOR C1 IS
      SELECT OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME
      FROM   ALL_CONSTRAINTS
      WHERE  OWNER           = p_Owner
      AND    TABLE_NAME      = p_Table_Name
      AND    CONSTRAINT_TYPE = 'R'
      ORDER  BY OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME;
      v_Referenced_Owner       VARCHAR2(31);
      v_Ret_Val                VARCHAR2(4000);
      FUNCTION CONSTRAINT_TABLE_NAME(p_Owner VARCHAR2, p_Constraint_Name VARCHAR2) RETURN VARCHAR2 IS
        CURSOR C1 IS
        SELECT TABLE_NAME
        FROM   ALL_CONSTRAINTS
        WHERE  OWNER           = p_Owner
        AND    CONSTRAINT_NAME = p_Constraint_Name;
        v_Ret_Val ALL_CONSTRAINTS.TABLE_NAME%TYPE;
      BEGIN
        OPEN  C1;
        FETCH C1 INTO v_Ret_Val;
        CLOSE C1;
        RETURN v_Ret_Val;
      END;
    BEGIN
      FOR R IN C1 LOOP
        IF (R.OWNER <> R.R_OWNER) THEN v_Referenced_Owner := R.R_OWNER || '.';
        ELSE                           v_Referenced_Owner := NULL;
        END IF;
        v_Ret_Val := v_Ret_Val || ', ' || v_Referenced_Owner || CONSTRAINT_TABLE_NAME (R.R_OWNER, R.R_CONSTRAINT_NAME);
      END LOOP;
      RETURN LTRIM(v_Ret_Val, ', ');
    END;
    But, if I embed the function within an anonymous block as follows, I get results:
    DECLARE
      CURSOR C1 IS
      select owner, table_name
      FROM   all_tables where owner = 'ABC';
      FUNCTION ZTM_TABLES_DEPENDED_ON(p_Owner VARCHAR2, p_Table_Name VARCHAR2) RETURN VARCHAR2 IS
        CURSOR C1 IS
        SELECT OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME
        FROM   ALL_CONSTRAINTS
        WHERE  OWNER           = p_Owner
        AND    TABLE_NAME      = p_Table_Name
        AND    CONSTRAINT_TYPE = 'R'
        ORDER  BY OWNER, CONSTRAINT_NAME, R_OWNER, R_CONSTRAINT_NAME;
        v_Referenced_Owner       VARCHAR2(31);
        v_Ret_Val                VARCHAR2(4000);
        FUNCTION CONSTRAINT_TABLE_NAME(p_Owner VARCHAR2, p_Constraint_Name VARCHAR2) RETURN VARCHAR2 IS
          CURSOR C1 IS
          SELECT TABLE_NAME
          FROM   ALL_CONSTRAINTS
          WHERE  OWNER           = p_Owner
          AND    CONSTRAINT_NAME = p_Constraint_Name;
          v_Ret_Val ALL_CONSTRAINTS.TABLE_NAME%TYPE;
        BEGIN
          OPEN  C1;
          FETCH C1 INTO v_Ret_Val;
          CLOSE C1;
          RETURN v_Ret_Val;
        END;
      BEGIN
        FOR R IN C1 LOOP
          IF (R.OWNER <> R.R_OWNER) THEN v_Referenced_Owner := R.R_OWNER || '.';
          ELSE                           v_Referenced_Owner := NULL;
          END IF;
          v_Ret_Val := v_Ret_Val || ', ' || v_Referenced_Owner || CONSTRAINT_TABLE_NAME (R.R_OWNER, R.R_CONSTRAINT_NAME);
        END LOOP;
        RETURN LTRIM(v_Ret_Val, ', ');
      END;
    BEGIN
      FOR R IN C1 LOOP
        DBMS_OUTPUT.PUT_LINE(ztm_tables_depended_on(R.Owner, R.Table_Name));
      END LOOP;
    END;
    Any ideas what is happening here?

    Any ideas what is happening here?
    Justin explained the probable reason.
    See the 'How Roles Work in PL/SQL Blocks' section of the database security doc for the details
    http://docs.oracle.com/cd/E25054_01/network.1111/e16543/authorization.htm#i1007304
    How Roles Work in PL/SQL Blocks
    The use of roles in a PL/SQL block depends on whether it is an anonymous block or a named block (stored procedure, function, or trigger), and whether it executes with definer's rights or invoker's rights.
    Roles Used in Named Blocks with Definer's Rights
    All roles are disabled in any named PL/SQL block (stored procedure, function, or trigger) that executes with definer's rights. Roles are not used for privilege checking and you cannot set roles within a definer's rights procedure.
    The SESSION_ROLES view shows all roles that are currently enabled. If a named PL/SQL block that executes with definer's rights queries SESSION_ROLES, then the query does not return any rows.
    Roles Used in Named Blocks with Invoker's Rights and Anonymous PL/SQL Blocks
    Named PL/SQL blocks that execute with invoker's rights and anonymous PL/SQL blocks are executed based on privileges granted through enabled roles. Current roles are used for privilege checking within an invoker's rights PL/SQL block. You can use dynamic SQL to set a role in the session.
    See that line starting with 'All roles are disables in any named PL/SQL block'?

  • Why does "enclosing folder" not work from the SEARCH window?

    I do a command+F search.
    Command+2 to view as list rather than groups
    and then sort by date modified.
    When I find the file/folder I want I'd really like to do a command+[up arrow] which in the GO menu is a valid command.
    Why does this work in finder windows but not in the search window?
    I'm not using spotlight, just the good old command+F
    This used to work in Sherlock 1 [using command+E] and when you opened the enclosing window, the file was already hi-lighted, faster to locate and saved mousing.

    You'll note that in the Go menu that command is grayed out meaning it's not active in the search results display.
    If you upgrad to Leopard then you can go to the Finder's View menu and select "Show Path Bar." The full path to any selected item in the Finder's window will be displayed in a path bar in the lower portion of the window. You can then double-click on any displayed folder to open a window on that folder.

Maybe you are looking for