Why does Adobe X not read an Adobe 9 file?
I have an ISPL for a vehicle that could be read by Adobe Reader 9 (not 9.5). Since upgrading my computer and using Adobe Reader X, I no longer have access to my files. Does anyone have a copy of Adobe Reader 9. I've tried Adobe.com but the earliest version they have is Adobe Reader 9.5
My old computer had Windows XP as the OS with Adobe Reader 9. My new computer now uses Windows 7. Using XP, I could read a disc with a ISPL (Illustrated Spare Parts List) on it.My new computer had Adobe Reader X installed on it but it would not read the disc, I kept getting error messages. Now, using the new computer, with the earliest available reader from Adobe for Windows 7, Adobe Reader 9.5, I still get an error message saying that the file is corrupt or has been sent as an email attachment.The disc where the files are was created by Heritage Motor Centre and contains General information, the ISPL and a Workshop manual for a Landrover Discovery. These are the files referred to as I own a Landrover Discovery 300Tdi. Should I now need any spares or information to repair my vehicle, I have to resort to a Landrover specialist.
[private data removed]
Similar Messages
-
Why does elements 11 not recognize nikon nef files
I have been using Elements 11 for quite a while for Canon Raw files with great success. It really works fine for me.
I recently bought a Nikon D300. For some reason Elements 11 will not recognize the Nikon NEF raw files.
W H Y ? ? ?Thank you for your reply.
Answers to your questions:
I am using Win7 64 bit. Elements 11 has worked just fine until I attempted to process NEF files.
I always copy files to my HD before trying to process any.
How do I check to see if my Camera Raw module is current? EVERY time, regardless of day of the week or time of day, when do the Help/Update thing I ALWAYS get that message block about website is busy, try again. I'll bet I've tried it over a hundred times over the past two weeks or so. I have a feeling that it can't be that busy for that long. Or, maybe I'm just unlucky, or maybe your server is too small to handle the load.
Needless to say, I am really frustrated with Adobe.
Again, thank you for your reply, and hopefully my answers will provide a solution.
Regards,
ChuckWagner
R_Kelly <[email protected]> wrote:
R_Kelly created the discussion
"Why does elements 11 not recognize nikon nef files"
To view the discussion, visit: https://forums.adobe.com/message/6643873#6643873
> -
Why is Camera Raw not reading Nikon d600 files after updating to 7.3
I have updated to ACR 7.3, my Photoshop is version 13.1 x64. However, I still cannot read the RAW files from my Nikon D600 with the message to check if there is an update for my cameras raw files available
Platform: Windows 7 64 bit, i7, 8GB RAM
Camera Raw version is showing as 7.3.0.71
And yep, I have restarted the computer and relaunched Photoshop since doing the update -
Why does Fireworks CS5 not show in Adobe Extension Manager CS5.5?
Hello,
I have problem with Extension Manager CS5.5.
But i have been found worng version of Extension Manager CS5. How do i move to new version of Extension Manager CS5.5?
I have been found help but it can not work while i am using command
http://help.adobe.com/de_DE/extensionmanager/cs/using/WSB4845EDD-14E5-476a-B749-FF328830D1 4F.html
i have been tried ..
look like this "Adobe Extension Manager CS5.exe" -enable product="Fireworks CS5" extension="Fireworks CS5"
But Extension Manager CS5.5 does not show "Fireworks CS5?
How do i fix this?Hi,
1. Extension Manager CS5.5 is used to manager products of CS5.5. Extensions of Fireworks CS5 can only be managed by Extension Manager CS5, which could be downloaded from below link.
http://www.adobe.com/exchange/em_download/em50_download.html
2. The '-enable' is used to enable extensions, not product. Fireworks CS5 shall be listed automacially in Extension Manager CS5.
Tell us if you have further problem.
Thanks,
Guo -
Why does this class not read and write at same time???
I had another thread where i was trying to combine two class files together
http://forum.java.sun.com/thread.jspa?threadID=5146796
I managed to do it myself but when i run the file it does not work right. If i write a file then try and open the file it says there are no records in the file, but if i close the gui down and open the file everything get read in as normal can anybody tell me why?
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import bank.BankUI;
import bank.*;
public class testing extends JFrame {
private ObjectOutputStream output;
private BankUI userInterface;
private JButton SaveToFile, SaveAs, Exit; //////////savetofile also saves to store need to split up and have 2 buttons
//private Store store; MIGHT BE SOMETHING TO DO WITH THIS AS I HAD TO COMMENT THIS STORE OUT TO GET IT WORKING AS STORE IS USED BELOW
private Employee record;
//////////////////////////////////////from read
private ObjectInputStream input;
private JButton nextButton, openButton, nextRecordButton ;
private Store store = new Store(100);
private Employee employeeList[] = new Employee[100];
private int count = 0, next = 0;
/////////////////////////////////////////////from read end
// set up GUI
public testing()
super( "Employee Data" ); // appears in top of gui
// create instance of reusable user interface
userInterface = new BankUI( 9 ); // nine textfields
getContentPane().add( userInterface, BorderLayout.CENTER );
// configure button doTask1 for use in this program
SaveAs = userInterface.getSaveAsButton();
SaveAs.setText( "Save as.." );
//////////////////from read
openButton = userInterface.getOpenFileButton();
openButton.setText( "Open File" );
openButton.addActionListener(
// anonymous inner class to handle openButton event
new ActionListener() {
// close file and terminate application
public void actionPerformed( ActionEvent event )
openFile();
} // end anonymous inner class
); // end call to addActionListener
// register window listener for window closing event
addWindowListener(
// anonymous inner class to handle windowClosing event
new WindowAdapter() {
// close file and terminate application
public void windowClosing( WindowEvent event )
if ( input != null )
closeFile();
System.exit( 0 );
} // end anonymous inner class
); // end call to addWindowListener
// get reference to generic task button doTask2 from BankUI
nextButton = userInterface.getDoTask2Button();
nextButton.setText( "Next Record" );
nextButton.setEnabled( false );
// register listener to call readRecord when button pressed
nextButton.addActionListener(
// anonymous inner class to handle nextRecord event
new ActionListener() {
// call readRecord when user clicks nextRecord
public void actionPerformed( ActionEvent event )
readRecord();
} // end anonymous inner class
); // end call to addActionListener
//get reference to generic task button do Task3 from BankUI
// get reference to generic task button doTask3 from BankUI
nextRecordButton = userInterface.getDoTask3Button();
nextRecordButton.setText( "Get Next Record" );
nextRecordButton.setEnabled( false );
// register listener to call readRecord when button pressed
nextRecordButton.addActionListener(
// anonymous inner class to handle nextRecord event
new ActionListener() {
// call readRecord when user clicks nextRecord
public void actionPerformed( ActionEvent event )
getNextRecord();
} // end anonymous inner class
); // end call to addActionListener
///////////from read end
// register listener to call openFile when button pressed
SaveAs.addActionListener(
// anonymous inner class to handle openButton event
new ActionListener() {
// call openFile when button pressed
public void actionPerformed( ActionEvent event )
SaveLocation();
} // end anonymous inner class
); // end call to addActionListener
// configure button doTask2 for use in this program
SaveToFile = userInterface.getSaveStoreToFileButton();
SaveToFile.setText( "Save to store and to file need to split this task up" );
SaveToFile.setEnabled( false ); // disable button
// register listener to call addRecord when button pressed
SaveToFile.addActionListener(
// anonymous inner class to handle enterButton event
new ActionListener() {
// call addRecord when button pressed
public void actionPerformed( ActionEvent event )
addRecord(); // NEED TO SPLIT UP SO DONT DO BOTH
} // end anonymous inner class
); // end call to addActionListener
Exit = userInterface.getExitAndSaveButton();
Exit.setText( "Exit " );
Exit.setEnabled( false ); // disable button
// register listener to call addRecord when button pressed
Exit.addActionListener(
// anonymous inner class to handle enterButton event
new ActionListener() {
// call addRecord when button pressed
public void actionPerformed( ActionEvent event )
addRecord(); // adds record to to file
closeFile(); // closes everything
} // end anonymous inner class
); // end call to addActionListener
// register window listener to handle window closing event
addWindowListener(
// anonymous inner class to handle windowClosing event
new WindowAdapter() {
// add current record in GUI to file, then close file
public void windowClosing( WindowEvent event )
if ( output != null )
addRecord();
closeFile();
} // end anonymous inner class
); // end call to addWindowListener
setSize( 600, 500 );
setVisible( true );
store = new Store(100);
} // end CreateSequentialFile constructor
// allow user to specify file name
////////////////from read
// enable user to select file to open
private void openFile()
// display file dialog so user can select file to open
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
int result = fileChooser.showOpenDialog( this );
// if user clicked Cancel button on dialog, return
if ( result == JFileChooser.CANCEL_OPTION )
return;
// obtain selected file
File fileName = fileChooser.getSelectedFile();
// display error if file name invalid
if ( fileName == null || fileName.getName().equals( "" ) )
JOptionPane.showMessageDialog( this, "Invalid File Name",
"Invalid File Name", JOptionPane.ERROR_MESSAGE );
else {
// open file
try {
input = new ObjectInputStream(
new FileInputStream( fileName ) );
openButton.setEnabled( false );
nextButton.setEnabled( true );
// process exceptions opening file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error Opening File",
"Error", JOptionPane.ERROR_MESSAGE );
} // end else
} // end method openFile
public void readRecord() // need to merger with next record
Employee record;
// input the values from the file
try {
record = ( Employee ) input.readObject();
employeeList[count++]= record;
store.add(record);/////////ADDS record to Store
store.displayAll();
System.out.println("Count is " + store.getCount());
// create array of Strings to display in GUI
String values[] = {
String.valueOf(record.getName()),
String.valueOf(record.getGender()),
String.valueOf( record.getDateOfBirth()),
String.valueOf( record.getID()),
String.valueOf( record.getStartDate()),
String.valueOf( record.getSalary()),
String.valueOf( record.getAddress()),
String.valueOf( record.getNatInsNo()),
String.valueOf( record.getPhone())
// i added all those bits above split onto one line to look neater
// display record contents
userInterface.setFieldValues( values );
// display message when end-of-file reached
catch ( EOFException endOfFileException ) {
nextButton.setEnabled( false );
nextRecordButton.setEnabled( true );
JOptionPane.showMessageDialog( this, "No more records in file",
"End of File", JOptionPane.ERROR_MESSAGE );
// display error message if class is not found
catch ( ClassNotFoundException classNotFoundException ) {
JOptionPane.showMessageDialog( this, "Unable to create object",
"Class Not Found", JOptionPane.ERROR_MESSAGE );
// display error message if cannot read due to problem with file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this,
"Error during read from file",
"Read Error", JOptionPane.ERROR_MESSAGE );
} // end method readRecord
private void getNextRecord()
Employee record = employeeList[next++%count];//cycles throught accounts
//create aray of string to display in GUI
String values[] = {String.valueOf(record.getName()),
String.valueOf(record.getGender()),
String.valueOf( record.getStartDate() ), String.valueOf( record.getAddress()),
String.valueOf( record.getNatInsNo()),
String.valueOf( record.getPhone()),
String.valueOf( record.getID() ),
String.valueOf( record.getDateOfBirth() ),
String.valueOf( record.getSalary() ) };
//display record contents
userInterface.setFieldValues(values);
//display record content
///////////////////////////////////from read end
private void SaveLocation()
// display file dialog, so user can choose file to open
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
int result = fileChooser.showSaveDialog( this );
// if user clicked Cancel button on dialog, return
if ( result == JFileChooser.CANCEL_OPTION )
return;
File fileName = fileChooser.getSelectedFile(); // get selected file
// display error if invalid
if ( fileName == null || fileName.getName().equals( "" ) )
JOptionPane.showMessageDialog( this, "Invalid File Name",
"Invalid File Name", JOptionPane.ERROR_MESSAGE );
else {
// open file
try {
output = new ObjectOutputStream(
new FileOutputStream( fileName ) );
SaveAs.setEnabled( false );
SaveToFile.setEnabled( true );
Exit.setEnabled( true );
// process exceptions from opening file
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error Opening File",
"Error", JOptionPane.ERROR_MESSAGE );
} // end else
} // end method openFile
// close file and terminate application
private void closeFile()
// close file
try {
//you want to cycle through each recordand add them to store here.
int storeSize = store.getCount();
for (int i = 0; i<storeSize;i++)
output.writeObject(store.elementAt(i));
output.close();
input.close();// from read!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
System.exit( 0 );
// process exceptions from closing file
catch( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error closing file",
"Error", JOptionPane.ERROR_MESSAGE );
System.exit( 1 );
} // end method closeFile
// add record to file
public void addRecord()
int employeeNumber = 0;
String fieldValues[] = userInterface.getFieldValues();
// if account field value is not empty
if ( ! fieldValues[ BankUI.IDNUMBER ].equals( "" ) ) {
// output values to file
try {
employeeNumber = Integer.parseInt(
fieldValues[ BankUI.IDNUMBER ] );
String dob = fieldValues[ BankUI.DOB ];
String[] dateofBirth = dob.split ("-"); // what used to put between number chnage to /
String sDate = fieldValues[ BankUI.START ];
String[] startDate = sDate.split ("-");
String sex = fieldValues[ BankUI.GENDER ];
char gender = (sex.charAt(0)); // check if m or f prob check in employee
if ( employeeNumber >= 0 ) {
/* create new record =String name, char gender, Date dob, String add, String nin, String phone, String id, Date start, float salary*/
record = new Employee(
fieldValues[ BankUI.NAME ],
gender,
new Date( Integer.parseInt(dateofBirth[0]),
Integer.parseInt(dateofBirth[1]),
Integer.parseInt(dateofBirth[2])),
fieldValues[ BankUI.ADDRESS ],
fieldValues[ BankUI.NATINTNO ],
fieldValues[ BankUI.PHONE ],
fieldValues[ BankUI.IDNUMBER ],
new Date( Integer.parseInt(startDate[0]),
Integer.parseInt(startDate[1]),
Integer.parseInt(startDate[2])),
Float.parseFloat( fieldValues[ BankUI.SALARY ] ));
if (!store.isFull())
store.add(record);
else
JOptionPane.showMessageDialog( this, "The Store is full you cannot add\n"+
"anymore employees. \nPlease Save Current File and Create a New File." );
System.out.println("Store full");
store.displayAll();
System.out.println("Count is " + store.getCount());
// output record and flush buffer
//output.writeObject( record );
output.flush();
else
JOptionPane.showMessageDialog( this,
"Account number must be greater than 0",
"Bad account number", JOptionPane.ERROR_MESSAGE );
// clear textfields
userInterface.clearFields();
} // end try
// process invalid account number or balance format
catch ( NumberFormatException formatException ) {
JOptionPane.showMessageDialog( this,
"Bad ID number, Date or Salary", "Invalid Number Format",
JOptionPane.ERROR_MESSAGE );
// process exceptions from file output
catch ( ArrayIndexOutOfBoundsException ArrayException ) {
JOptionPane.showMessageDialog( this, "Error with Start Date or Date of Birth\nPlease enter like: 01-01-2001",
"IO Exception", JOptionPane.ERROR_MESSAGE );
// process exceptions from file output
catch ( IOException ioException ) {
JOptionPane.showMessageDialog( this, "Error writing to file",
"IO Exception", JOptionPane.ERROR_MESSAGE );
closeFile();
} // end if
} // end method addRecord
public static void main( String args[] )
new testing();
} // end class CreateSequentialFileSure you can read and write at the same time. But normally you would be reading from one place and writing to another place.
I rather regret avoiding the OP's earlier post asking how to combine two classes. I looked at the two classes posted and realized the best thing to do was actually to break them into more classes. But I also realized it was going to be a big job explaining why and how, and I just don't have the patience for that sort of thing.
So now we have a Big Ball Of Tar™ and I feel partly responsible. -
Why does PP CS5 not keep my preview files on my Mac?
I love Premiere Pro on my Mac because it interfaces so well with AE. However, every time I render something in my DSLR timeline, shutdown Premiere, then open it later, I have to re-render again.
I am not a novice and I know what I am doing, but I've tried everything and it won't keep my render files.
I want to switch away from Final Cut because I can edit DSLR natively in Premiere, but Final Cut seems to work better.
I am using dual 2.93 ghz quad core Xeon processors, 16gb ram. Internal 4tb raid, 3 external 4tb GRaid firewire drives for video storage. These 3 drives are always attached to my system and are always on when editing. The render files are always there and not on another portable drive somewhere.
I can render my timeline in PPro, then close the program. Open the program back up in a minute and have to re-render.
Any ideas?
Thanks.Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel. -
Why does iMovie '09 not directly import MTS files?
I see lots of posts of people having problems with their HD movies. I have 16GB of movies on my Canon HF100 that I cannot import into iMovie because of some weird iMovie bug where it is looking at the entire file structure on the card. I can reformat the SD card and shoot a few quick movies and iMovie '09 recognizes the card and imports just fine. The million dollar question is why can't iMovie '09 import MTS files directly? What about for people with archived MTS files? To me something is missing here. Either iMovie '09 has a bug importing or there is some super critical folder structure it is looking for before it imports. This is obviously not an isolated issue. BTW, I do not want to and should not have to use a third party file converter. Every conversion means loss in quality. Can someone at Apple address our issues? Is there possible a fix coming?
I have been searching for an answer to this question and no one seemed to have an answer. There is however a very easy work around thanks to the poster RodrigoPoloDOTcom.
http://discussions.apple.com/message.jspa?messageID=10745889#10745889
Basically you can re-encode all of your MTS files very fast with FFMPEG and using the command ffmpeg -i myvideo.m2ts -acodec copy -vcodec copy myvideo.m4v
If you are on a Mac you can instal FFMPEG with RodrigoPoloDOTcom's method. Paste the following entries into the Terminal:
curl -O http://rodrigopolo.com/ffmpeg/binkit/mac/binkit-v1.1.tar.gz
tar xzvf binkit-v1.1.tar.gz
cd binkit-v1.1/
./install.sh
cd ..
rm -rf ./binkit-v1.1
rm binkit-v1.1.tar.gz
Then you can navigate to your directory that contains all of your MTS files and execute the following command from Terminal:
apply 'ffmpeg -i %1 -acodec copy -vcodec copy %1.m4v' *.MTS
I was then able to import my movies into iMovie '09 with ease. I do not understand why iMovie '09 cannot do something like this when trying to import MTS files directly. -
Why does "Print Booklet" not print all the files in book?
My new Indesign CS4 will not let me do what I was able to do easily with Pagemaker 6 and Indesign CS2. When I go to “Print Booklet”, the program will not print the entire book, but only whatever file is check marked at the bottom of the WINDOW tab on the Menu Bar. I have tried with the files in the BOOK Menu selected and not selected. No difference. I have tried every way I can think of to add and link the files indicated in the Book Menu to the actual files. Each time the same. I have reinstalled the program. Still the same. I am using a Mac PowerBook G4 with OS X 10.4.11. Your ideas and help will be greatly appreciated..........Richard
Sorry, Print Booklet simply isn't designed to be used with multiple files. You'll notice it isn't available in the Book Panel menu.
You could export the entire book to PDF, then place the PDF in a new document and use Print Booklet to print that. -
my adobe reader does not read my pdf filI think it was screwed up by the other "PDF-READER". I deleted the other "PDF-READER" from my pc, but it still does not work.
Hi wellsfar,
Which version of Adobe Reader you are using?
Is it showing any error message?
A screenshot of the error would be more helpful.
Regards,
Florence -
Why does Windows 7 keep closing down Adobe reader?
Why does Windows 7 keep closing down Adobe reader?
Three possibilities
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html -
Can not read my pdf files can i use adobe ?
I can not read my pdf files and need to download adobe ,can you help please .
In order to read the pdf either you need Acrobat or Adobe Reader,
Acrobat is a paid software and used to read and edit the pdf files.
Reader is the free software used to just read the pdf files.
To download reader use this link:- http://get.adobe.com/reader/ -
Why Does Dynamic Link Not Work
I purchased the CS5 Adobe Production Premium. I have been working in Premiere and I have been learning about how to use Dynamic Link. I want to be able to alter clips in After Effects and bring them back and forth into Premiere. When I go to File/ Adobe Dynamic Link/New After Effect Composition, I get this message:
Adobe Dynamic Link Requires Adobe Production Premium.
Since I own production premium, I do not know why I am getting this message. I have reinstalled the CS5 Production Premium Software twice and it still gives me the same message. What can I do to get Dynamic Link Working.Thank you for the tip. Could you possibly tell me how to deactivate and
then reactivate the suite. I am using a Macbook Pro laptop running OS
10.6.4. I do not even know where to start.
From: Colin Brougham <[email protected]>
To: Dan Seanor <[email protected]>
Date: 03/15/2011 09:55 AM
Subject: Why Does Dynamic Link Not Work
Deactivate the software (not uninstall), and then reactivate the suite.
This often fixes this. You can opt to leave the serial number on the
system; no need to clear it and re-enter it. -
Why does Captivate 2 not think I have Flash installed?
Why does Captivate 2 not think I have Flash installed? It will not start up even though I have the most recent version of Flash. It tries to redirect me to the download page every time.
The issue is actually due to the way all versions of Captivate prior to version 5 were coded. They were not able to understand the Flash Player numbering beyond a given version. Once that version of Flash Player is exceeded, they give the same error message as shown when your Flash Player version is too LOW.
When Captivate 4 had this issue Adobe provided a download patch to resolve. But you have absolutely NO chance now of getting a fix for something as old as Cp2. -
Camera raw does not read D7100 nef files [was:Ernied]
Camera raw does not read d7100 nef files. did update...still no success.
I suspect that the DNG converter will work for you if you use it properly. It isn't your fault, but Adobe has created a kind of a silly interface in the DNG converter. Notice that it is asking you for the folder. When you are browsing for a location within the DNG converter, choose the folder, but don't open the folder. If you do then the DNG converter will tell you there are no images to convert. If you choose the folder then the DNG converter will convert all the files within that folder.
-
Problem: this mac is not reading an excell file after upgrading to yosemite. My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it. Now it once i donwload the zip it appears with an ".ods" extension
i even already download a link
http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
Im afraid to erase it and not being able to get it back...
What can i do!??
Thanks in advance for this kind answer!!!fsolution wrote:
Problem: this mac is not reading an excell file after upgrading to yosemite... Now it once i donwload the zip it appears with an ".ods" extension...
If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.
Maybe you are looking for
-
I have to export Outlook 2007 email a hundred times a day. Most of the time I do not want the attachments included with the email because I have to save them off to various directories and do not want or need to double up the storage space. However,
-
Dear Gurus, Iu2019m in a project were the client wants to use CATS to transfer actual salary cost from cost centers to orders, cost centers and networks. In order to do so, weu2019ve been using CATS to register Statistical Key Figures, which are then
-
How Do Everyone! I have amended an exitsing ABAP report which displays information via an ALV grid i.e. FM 'REUSE_ALV_GRID_DISPLAY'. It uses the logical database PCH. When the report is displayed the icons - SAVE layout and SELECT layout are both mis
-
Hi I am developing a report to display the MRP results collectively. what is the table from which i can get the MRP results like current stock, Purchase requisition and purchsae orders for various time periods. Solai [email protected]
-
Internal error at ctxsys.drue line 157 while optimising
On a table containing 410000 documents (table has 2 columns, an integer ID and a CLOB containing the document) I created an index with a path section group (using begin ctx_ddl.create_section_group('xml_path_section', 'PATH_SECTION_GROUP'); end;