Why does an update for iOS 7 require the entire operating system to be downloaded again? (over 1gB?)

Hi, i just got a message stating my recently downloaded iOS7 needs updating. When I go to do that, it begins downloading a ridiculously large 1.2 Gb file, but I thought it's only an update, seems ridiculous that one would be required to download such a huge file, especially when one is on a data plan with limited amounts of data......!?

Yes, I have. My system was completely cleaned of everything and I'm just now RE-INSTALLING CS2 for Windows2000 XP from the Adobe site that gives you versions to select for your OS. I have successfully downloaded disks 1,2 and 3 and I can INSTALL disks 1 and 2, but it FAILS at disk 3. I REALLY need to resolve this today because I need to submit some work by tomorrow and the troubleshooting isn't helping!
Can you advise anything else . . . anyone? Thank you!
Khrystle13

Similar Messages

Does Adobe Reader for iOS have the ability to open inbedded links to additional PDF docs? If not, then what would be the best way to use these already created PDF's?

Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?

driddy61,
As of June 2014, none of the Adobe Reader mobile products support the hyperlink action for opening a separate PDF document.
Adobe Reader for iOS
Adobe Reader for Android
Adobe Reader Touch for Windows 8
In addition, the Reader mobile products do not open multiple windows/documents simultaneously, which would make the navigation between PDF documents nearly impossible. (Once a hyperlink takes you to a different PDF document, you have no way to go back to the original PDF document.)
The only Adobe Reader product that fulfills your department's requirements is Adobe Reader XI (mostly for Windows/Mac desktop/laptop computers). Acrobat Pro and Standard are paid products.
Because you are in search of a less expensive device for your department, you could get a Windows tablet instead of a Windows desktop/laptop computer. Microsoft Surface Pro (that you've mentioned in your previous reply) is just one example. You can also find other less expensive Windows tablets.
Tablets
However, please keep in mind that there are two different types of Windows tablets running two different operating systems.
(a) A Windows tablet with an Intel-based processor running Windows 8.1 Pro
Example: Surface Pro 3
You can install and run traditional desktop apps (e.g. Adobe Reader XI) and new Windows Store apps ("Modern" or "Metro-style" apps).
(b) A Windows tablet with an ARM-based processor running Windows RT 8.1
Example: Surface 2
You can only install and run Windows Store apps (e.g. Adobe Reader Touch) but not traditional desktop apps like Adobe Reader XI.
In general, type (b) tablets are more affordable than type (a) tablets. However, if you want to run Adobe Reader XI, you do need to check the technical specification of each tablet and make sure the following conditions are met.
Processor: Intel
Operating system: Windows 8/8.1 or Windows 8/8.1 Pro, not RT
Hope this helps you choose the right device for your department. Please let us know if you have any questions about system requirements or supported features in the Adobe Reader products.

I have updated my 3gs to the latest operating system but it is stuck in recovery mode and I can't get it to restore...any suggestions?

I have updated my 3gs to the latest operating system but it is stuck in recovery mode and will not restore...any suggestions on getting it to restore?

Yes, a message pops up on the computer that says..."The iPhone could not be restored. An unknown error occurred. (3014)" I tried to research this and tried all of the things Apple suggested but still am not having any luck with it. Thanks for any assistance you may provide!

HT1338 After updating my mac to the new operating system I have had several problems. Now my printer program is not working.

After updating my mac to the new operating system I have had several problems. Now my printer program is not working.
Do you have any suggestions?

Start by telling us what printer you hope to use.
Look at the printer manufacturers site to see if they have a 10.9 print driver.
Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
http://support.apple.com/kb/HT1341
If the model is supported you should be able to add it & the driver will be downloaded.

Why won't my iPhoto open in the latest operating system

why won't my iPhoto open in the latest operating system

Whcih version of iPhoto do you have? You may want to look at the Mac App Store and see if you have an update for iPhoto.
Clinton

Illustrator and photoshop 2014 work perfectly, while Indesign crashes the entire operating system (mac osx 10.7)

Hi all,
Recently updated to CC 2014, and while both Illustrator and Photoshop run perfectly, every time I launch Indesign it crashes my entire operating system, forcing me to restart the computer.
I'm running Mac OS 10.7. Should also mention that clean unistall/install did nothing to fix the issue.
Anyone else having the same issue? Please help.

Hi Sumit
Why can’t I have any answer from Adobe? I bought a licence and now I can’t work with the software.
Regards
RUI FURTADO
MAO brand partner
R. Nova da Alfandega, 7 - S. 305
4050-430 Porto
M +351 936 359 707
E [email protected]

Does adobe reader for IOS allow the use of buttons in a pdf document?

I have tried to read a pdf with buttons on my iPad (the pdf was produced by me and edited on acrobat pro to include bottons to show/hide text fields). The buttons do not fuction when I try to read the document on my iPad. Is there a way to get these buttons to function?

It depends on what actions are assiciated with the button. Unfortunately, Show/Hide field actions are not supported at this time, nor is the functionally equivalent JavaScript. At least one other PDF viewer for iOS has support for this.

Why does my imac camera not work with maverick operating system

i updated my software to 10.9.2 yesterday and facetime and photobooth dont recognize my built in camera on my imac

Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

Error: This installer does not support installation on a 64-bit operating system. Please download the 64-bit version of Premiere Elements.

what to do?

anorman9
What version of Premiere Elements and on what computer operating system?
Can we assume Premiere Elements 13 on Windows 7, 8, or 8.1 64 bit and that you are dealing with purchased installation files instead of tryout?
In either case, it might be easier for you to consider the download of the Premiere Elements 13 tryout from the following web site, where it might be easier to pin point the files that you need for your specific computer environment, that is, 32 bit installation files for 32 bit operating system and 64 bit installation files for 64 bit operating system. . If you are dealing with purchased software and serial number, during installation of the tryout files you insert your purchased serial number into these installation files. And, remember, you need 2 files for the process...one with a .exe file extension and one with a .7z file extension
So, please review and consider the following
http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
To avoid an Access Denied message, please follow carefully the web site's "Note: Very Important Instructions".
Please let us know if any questions or need clarification.
Thank you.
ATR

I am trying to update my computer to the lion operating system.

How can I upgrade my computer to the OSX Lion operating system?

TRYING TO UPDATE MY IMAC ... HERE'S THE INFO ON IT BELOW. softer update almost loads then says:... SYSTEM ERROR cant complete
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.20f4
System Software Overview:
System Version: Mac OS X 10.6.7 (10J869)
Kernel Version: Darwin 10.8.0
Boot Volume: Macintosh HD
Boot Mode: Normal

Why does Apple Bluetooth for iOS not support SPP profile?

I am curious why this really useful protocol is not supported by iOS.
Thanks for any information.
What I would do with it: develop software to support my favorite OBD-II interface hardware, PLX Devices Kiwi Bluetooth.

KT,
Thanks for your reply.
There are some iOS apps that support OBD-II, generally by a specific manufacturer for their hardware. Much of this hardware is "not very good". PLX is a unique company with great hardware, I already own a Kiwi BT ($$) and do not want to buiy lesser junk just so I can buy the single-source software that comes with it. PLX provides an open interface architecture that happens to be SPP Bluetooth. There is a lot of great software for it from different angles...all Android. I used to have an android phone when I bought the Kiwi. The Kiwi Wifi is supported by Apple, I will buy that if I have to get more hardware... but not happily. Apple has restricted SPP from the "bubble", I just want to know why?
Regards,
Jack

Why does my cursor not automatically select the entire word when I try to select text by starting/ending in the middle of a word?

In any other browser I've used (or word processor, for that matter) when I select text using my mouse cursor, if I start and/or end in the middle of a word, it automatically selects the whole word when I'm selecting more than one word. But for some reason this is not happening in Firefox. If I try to select say 3 words, and I start in the middle of the first word and end in the middle of the last word, it will only select those parts, not all 3 words entirely.

Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

HT3204 Having problems updating my 3gs to the new operating system. Ran diags. and all passed?? update fails

I have tried to update my Iphone 3gs to IOS 6 several times and keep getting error message 6. What is wrong

http://support.apple.com/kb/TS3694#error6

Does Adobe AIR for iOS support APNs?

Does Adobe AIR for iOS support the Apple Push Notification Service (APNs)?
for more information on APNs see:
http://developer.apple.com/library/ios/#documentation/NetworkingInternet/Conceptual/Remote NotificationsPG/ApplePushService/ApplePushService.html

It is exactly the same.
Do I need to add the mobileprovision in any step of the resigning process?
Inside the unpacjed ipa, i've fund a Info.plist.
This seems to be the plist file generated from adt.
Do I need to integrate my entitlement with the original one?
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
    <dict>
        <key>CFBundleAllowMixedLocalizations</key>
        <true/>
        <key>CFBundleVersion</key>
        <string>0.0.0</string>
        <key>CFBundleShortVersionString</key>
        <string>0.0.0</string>
        <key>CFBundleIdentifier</key>
        <string>XXXXXXXX</string>
        <key>CFBundleInfoDictionaryVersion</key>
        <string>6.0</string>
        <key>CFBundleExecutable</key>
        <string>iBatteryExample</string>
        <key>CFBundleDisplayName</key>
        <string>iBatteryExample</string>
        <key>CFBundlePackageType</key>
        <string>APPL</string>
        <key>DTCompiler</key>
        <string>4.2</string>
        <key>DTPlatformBuild</key>
        <string>8C134</string>
        <key>DTPlatformName</key>
        <string>iphoneos</string>
        <key>DTPlatformVersion</key>
        <string>4.2 Seed 2</string>
        <key>DTSDKName</key>
        <string>iphoneos4.2</string>
        <key>DTXcode</key>
        <string>0325</string>
        <key>DTXcodeBuild</key>
        <string>10M2423</string>
        <key>LSRequiresIPhoneOS</key>
        <true/>
        <key>MinimumOSVersion</key>
        <string>4.0</string>
        <key>NSMainNibFile</key>
        <string>MainWindow</string>
        <key>NSMainNibFile~ipad</key>
        <string>MainWindow-iPad</string>
        <key>CFBundleResourceSpecification</key>
        <string>ResourceRules.plist</string>
        <key>UIStatusBarHidden</key>
        <false/>
        <key>renderMode</key>
        <string>auto</string>
        <key>CTRequestedDisplayResolution</key>
        <string>high</string>
        <key>DebugMode</key>
        <false/>
        <key>CTSoftKeyboardBehavior</key>
        <string>none</string>
        <key>CTNamespaceURI</key>
        <string>http://ns.adobe.com/air/application/3.0</string>
        <key>CTAutoOrients</key>
        <true/>
        <key>CTInitialWindowTitle</key>
        <string>iBatteryExample</string>
        <key>CTInitialWindowContent</key>
        <string>xxxxx.app/xxxxxxxx.swf</string>
        <key>CTMaxSWFMajorVersion</key>
        <string>13</string>
        <key>CFBundleSupportedPlatforms</key>
        <array>
            <string>iPhoneOS</string>
        </array>
        <key>UIDeviceFamily</key>
        <array>
            <string>1</string>
            <string>2</string>
        </array>
        <key>aps-environment</key>
        <string>development</string>
        <key>com.apple.developer.aps-environment</key>
        <string>development</string>
        <key>get-task-allow</key>
        <true/>
        <key>UIRequiredDeviceCapabilities</key>
        <array>
            <string>armv7</string>
            <string>opengles-2</string>
        </array>
        <key>UISupportedInterfaceOrientations</key>
        <array>
            <string>UIInterfaceOrientationPortrait</string>
            <string>UIInterfaceOrientationPortraitUpsideDown</string>
            <string>UIInterfaceOrientationLandscapeRight</string>
            <string>UIInterfaceOrientationLandscapeLeft</string>
        </array>
        <key>Extensions</key>
        <array>
            <string>myExtension</string>
        </array>
    </dict>
</plist>
as you can see it already contains the aps-environment value because I've added it in my appdescriptor file.
Any idea?
Thanks

HT203171 Why does my laptop overheat and then the fan goes absolutely beserk!!!

Well basically after about half an hour of use the laptop starts to make a luder fan noise.
After 10 minutes of this the fan goes beserk - I mean beserk and it's quite scarry. Then the entire operating system fails and the system restarts. I tried resetting the PMU but it won't reset properly. I need some other way of fixing it.

Hello:
You need to take the computer in for diagnosis. There is a hardware issue, but no one can diagnose that on-line.
Barry

Why does an update for iOS 7 require the entire operating system to be downloaded again? (over 1gB?)

Similar Messages

Maybe you are looking for