Why does apple tv 2 lose connection with netgear router through a wired connection?
I have Apple TV 2 connected to a Netgear wnder3700 through a wired connection. The Apple TV is up-to-date. However, from day 1 (before firmware updates and currently) apple tv will lose internet connection. All other devices on the network remain connected. the only solution is to physically unplug the the apple tv and let it reconnect on reboot. Same issue exists on a wireless connection.
I would update the firmware of the router
Similar Messages
-
Why does apple release seri in beta with many problems
why does apple release seri in beta with many problems
terryfromprescott wrote:
why does apple release seri in beta with many problems
That is the point of a beta version.
Software in the beta phase will generally have many more bugs in it than completed software, as well as speed/performance issues. The focus of beta testing is reducing impacts to users, often incorporating usability testing. "
http://en.wikipedia.org/wiki/Beta_version#Beta -
Why does my bluetooth mouse lose contact with my MCB
Hello community, my mouse sometimes loses contact with my mbp retina 15' Mavericks, it has a bettery at 50% power. Is this normal? Thank you in advance
even if the battery says it is (half) full, usually it helps to replace the battery.
try just taking it out and then in again, might help temporarely.
re-pairing also might do the trick.
in this order.
Lex -
Wifi connection with netgear router DG824M - one solution
I have had some problems with connecting iphone via wifi with my home router
Netgear DG824M
I'm still having a problem with the encryption issue but have at least found one solution to another security issue and thought it might help others so i am posting:-
If you have mac address filtering turned on (netgear describes this as only "trusted PC's" can connect) , you may find that you get an IP Address clash when you try to connect your iphone (or some other apple equipment)
I found that this resolved if i selected an "reserved IP address" for the iphone - in my casei chose 192.168.0.10 (since the router allows up to .51)
(the phone otherwise took 192.168.0.3 which clashed with another device)
This was not an issue when "trusted pc's" feature was turned off on the routerOk guys. This is the simple way i used to connect my iPhone to my Netgear router.
1. In your iPhone, go to Settings>General>About. Then, scroll down to "Wi-Fi Address". This is your MAC address. This you will need in order to authorize your phone in your Netgear page (which usually looks something like XXX.XXX.X.X (where "X" are numbers)).
2. Log in to you Netgear page.
3. On the blue left panel of the screen, click on "Wireless Settings". A new page comes up.
4. Click on "Setup Access List".
5. Click on "Add" to enter the require info needed for your phone to gain access to your network.
6. On "Device Name" I entered "iPhone". This name is irrelevant for i named my iPhone differently and using just "iPhone" worked. So enter whatever name you wish, but keep it simple.
7. Now, on "Mac Address" (the single most important info here) enter the number you obtained in Step 1. Make sure you enter it with the colons (:).
8. Add and apply, and wait for the blue bar at the top of the screen to do its thing. It will take only a few seconds to update the network.
That's all! Connect and enjoy!
I hope this was helpful. Let me know if it worked at [email protected] -
Hi.
I'm genearlly happy with the idea of my Apple TV 2, but I've got two problems with it that keep popping up and I have no idea how to fix them:
1- Watching HD video causes the image to flicker on long shots. My TV is a 40" Sharp Aquos from 2010. SD content seems fine. Tried several HDMI cables and no dice.
2- At random times, the Apple TV 2 will lose all the information from my itunes libraries. It'll still connect but give me the message "There are no items" or something similar. My current workaround is to disconnect from home sharing, then reconnect and enter my username and password with the Apple remote (remote app on iPhone no longer works at this stage) which is a pain, because my PW is complicated.
Any solutions?
Thanks!Welcome to the Apple Community.
1- Watching HD video causes the image to flicker on long shots. My TV is a 40" Sharp Aquos from 2010. SD content seems fine. Tried several HDMI cables and no dice.
There may be a couple of reasons for this. It may simply be poor encoding. Alternatively stuttering can become quite noticeable on panned shots when the the framerate of the video does not match the TV output frequency.
2- At random times, the Apple TV 2 will lose all the information from my itunes libraries. It'll still connect but give me the message "There are no items" or something similar. My current workaround is to disconnect from home sharing, then reconnect and enter my username and password with the Apple remote (remote app on iPhone no longer works at this stage) which is a pain, because my PW is complicated.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel. -
Slow connection with WRT160N router through wired & wireless
When I connected directly to my cable modem, I got ~10Mbs. But when I connected through my new WRT160N router with either wired or wireless, I got only half the speed, which is 4-5Mbs. Anyone know why or any idea how to change the setting to make the connection faster. Any help would be appreciated. Thanks.
Login to the web administration interface and under the security tab disable SPI (stateful packet inspection). This feature is designed to detect wan interface attacks (ping of death) and block the sender. It kills your throughput for your internet connection. Try xferring a file across your lan (wireless to wired pc) and check your N speeds. The xfer speed should be 100mbps since the wired pc will most likely be limited to 100mbps by your nic. If lan speed is slower than 100mbps (assuming you have and are using N standard) then you may have a bad router. Definitely disable SPI though and that should fix your slow wan speed.
-
Why does Apple iPad Camera Connection Kit no longer work with iOS8
Why does Apple iPad Camera Connection Kit no longer work with iOS8?
The kit is firmly inserted in thhe iPad's dock ? You could also try a reset and see if it's recognised after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
I haven't had problems using the kit with SD cards from Canon cameras . What capacity is the card, and it's an SD or SDHC card - if it's an SDXC card that's formatted as ExFAT then it won't be recognised -
Why does my iMessage not work even with my apple ID signed in?
Why does my iMessage not work even with my apple ID signed in?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only. -
IF UPDATES TO APPS THAT CAME WITH OUR MAC ARE FREE, WHY DOES APPLE REQUIRE BILLING INFORMATION TO BE COMPLETED IN THE SCREEN JUST BEFORE ACCESS TO INSTALLING FREE UPDATES???
It is necessary to confirm your identity as the 'buyer'. Please do not use all capital letters. It is not well regarded here and can be tricky to read for some. Thank you.
-
Why does Apple keep breaking the podcast app?
Why does Apple keep breaking the podcast app?
Here are my issues, maybe you can help... And yes "breaking" and "nightmare" are accurate descriptions of this update...
1. Syncing is now impossible without WiFi or a Cellular connection. I've tried your guide in the other thread, but it didn't help.
When I sync podcasts with iTunes, they DO NOT SHOW UP in the app unless I connect my iPhone 5S to WiFi or Cellular. As soon as I connect it to something, new episodes that I manually synced finally show up and can be played.
2. Arranging the podcasts in any order is now pointless. Any sort of wireless connection will reset my order to a randomized one. It's not even "podcasts with the newest episodes on top", it's just random.
3. Apple doesn't seem to allow any other podcast app to use the manual sync in iTunes. Am I wrong about that? I looked at countless paid apps and they all have their own cloud or system to only deliver episodes wirelessly...
4. And that constant prompt about Cellular data access could drive anyone insane!
I have never been this frustrated with an Apple product in my life... -
i cannot install apps that are upgraded to ios4. im using iphone 2g 3.1.3 this makes me sad.. why does apple need to updates many apps when we cannot update an iphone 2g anymore..
I am having the exact same problem with trying to sync my iPad with my computer. To make a long story short, I had to reinstall Windows for my computer and therefore had to reinstall itunes.
I have done back ups in the past for my ipod touch and other ipods with no problems, but unfortunately I have never been able to back up my iPad. During a sync, the iPad would always disconnect from my computer and it would never finish. it would say the connection was lost, but nothing is wrong with the connection.
So now I have over 100 apps and thousands of pictures that I am afraid will be deleted if I run the sync in itunes. I have tried to transfer purchases and it goes through the list of apps, but nothing is ever transferred.
Any help would be appreciated. I am not interested in jailbreaking my iPad to solve this problem. There should be a fix for this and I want to upgrade to ios 4.3 as the original poster. Please help -
I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
I also add two more custom fields in the Email area.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
<http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
<http://hints.macworld.com/article.php?story=20110729034827358>
<http://www.macworld.com/article/1047793/folderinterm.html>
<http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
<http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal> -
Why does Apple TV show me that is takes 19 hours to play a movie
Why does Apple TV show me that is takes 19 hours to play a movie
The time it takes to load is dependent on your network
What is your current connection, use speedtest.net
Make sure DNS is set to auto
if on wifi try Ethernet -
Why does apple tv take hours to record
Why does Apple TV take hours to record movies?
Not sure what you mean by 'record movies'
If you are trying to rent a movie and it's taking a long time before it starts then that is due to your connection.
720P requires 6mbps for instant streaming
1080P requires 8mbps
You can switch to SD in the settings
To check your connection go to speedtest.net -
Why does Verizon not provide 3G coverage in Western Maryland (Garrett County) and why does it not have an agreement with US Cellular for such coverage?
Thanks for the zip code pfekete. I looked into the coverage in your area and I do see you are in an extended 1X data coverage which explains why you're not connecting to 3G. What phone do you have? We may be able to advise you on how to adjust the settings so it picks up the strongest signal. I apologize for the inconvenience.
AdaS_VZW
Follow us on Twitter at @VZWSupport
Maybe you are looking for
-
I can't make a group conversation with my friends help
Ok so I tried to make a group conversation with my friends but it says it failed to send help!! idk if it's because one of my friends doesnt have an I phone but I don't think that's the problem because I could txt him in a seperate conversation. Then
-
Styling text box of a combobox
Hi -- I have a comboBox that I am styling using this code: new_style.setStyle("embedFonts",true); new_style.setStyle("fontFamily", "Gibraltar-Plain"); new_style.setStyle("color", 0x653a71); new_style.setStyle("fontSize", 12); new_style.setStyle("roll
-
ConnectionPool - MySql Driver Class Not Found
am trying to set up a connection pool for a MySql Database. I am using the Driver package: mysql-connector-java-3.0.15-ga When I try to ping the DataSource I get the following exception reported: java.lang.ClassNotFoundException: com.mysql.jdbc.jdbc2
-
Can Flex interact with an ActiveX control? If I have an ActiveX control which provides information from the register of the local computer through IE, can Flex communicate with the ActiveX control? I understand that Flex can communicate with external
-
I am using the Dallas Semiconductor DS9097U-S09 and the example posted here: http://zone.ni.com/devzone/cda/epd/p/id/1500 If I try to write to a DS2431 EEPROM there are no errors, but when I read the EEPROM I don't get the actual data back. Then I t