Why does AttachMovie not work after a loadClip?

Hi, i am trying to attach a movieclip from my library to the
movieclip that is loaded.
It does not seem to work. I only can attach it to the _root!
In this example i have an movieclip with an idintifier link
of 'round'.
As you can see i can approach the loaded movieclip, because i
resized it. I can change it rotation, alpha etc.
But i can't attach a movieclip to it? It does not make any
sense.. Is there a fix for it?

Most likely because 'this' within onLoadInit refers to the
MovieClipLoader
class, and not a MovieClip. If you look in the Help, you'll
see onLoadInit
can receive a target parameter, use that, or directly
reference the clip you
want.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Similar Messages

Why does printer not work after network password changed?

I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.

Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi

Why does iccProfile not work after upgrading to snow leopard

The icc Profile for my printers Epson R2400 and Canon 4500 dont work anymore after installing snow leopard. I updated already the treiber for both printer and also loaded original icc profile from epson and canon. I print from Aperture 2.1.4. Under 10.5 I never had problems with printing.

I marked it incorrectla as unserd. sorry

Why does't Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?

I had problems last year when Flashplayer stopped working suddenly. After months of seeking help, I received instructions that fixed the problem...until the other day. A pop-up box from Adobe appeared indicating an update was available. I agreed to installing the update and the Flashplayer has not worked since. I referred to my notes from the "fix" last year and made one adjustment in the Active-X settings, but this did not help. Flashplayer still does not work. Help! I just don't think I can go through this for several months again.

Hi,
I am going to try reorganizing my reply first and
just forwarding to you before I try to recover a
message. I think the problem may be that I
provided answers within your text instead of
separately. Your system may not like the format
I tried. So here goes.... I have pulled my
answers out of your message and they appear in
the order of your inquiries below.
“Check the Windows system tray carefully to make
certain no applications are still in memory which
might possibly use Flash Player.” –a statement
from the Adobe Un-install link article. I don't
know what “in memory” means. The only things I
have that may use Flashplayer that I know of is
the Weather Bug. Windows Mediaplayer is also
listed in my programs, but I have never used it.
Also, there is no mention of Norton here, but
Norton Internet Security ’09 is what I have installed.
1. No Firefox. MSN Exlorer is listed among my
Programs, but I have never used it. It was
likely installed by Dell when I purchased the computer.
2. Norton Internet Security '09. Bell Internet
Security - Alert is listed in my programs (with
options, including uninstall) but this is the first time I have noticed it.
3. Norton Internet Security has a firewall with
it that I understand is way better than Windows.
4. There is a Google toolbar, Norton toolbar and
a bunch of stuff listed in the Manage Add-ons
like Skype, Adobe and Sun Java Console which I think are add-ons.
Java Webstart is listed under Accessories in
Programs. In Programs is Adobe Distiller 6.0,
Adobe Acrobat 6.0 Standard, Adobe (which is
empty), Adobe.com and Adobe Reader 9. I did not find DLM or GetPlus.
I found no listing for Shockwave Flash
Object. You did not ask this and I don't mean to
get ahead of you but in case there is relevance,
I looked in Internet Options, Security, Custom
and saw a number of reference to Active X and
plug-ins, some of which are disabled; others enabled.
From reading in your posts to mlmarg, I saw the
instructions for finding the Flash folder and
used them. I used Explorer to access My
Computer,, C Drive, Folder 1386, Folder System
32. There are 2 items in it from 2002 but not
what I think you want. The 2 are SMSS.EXE and
NTDLL.DLL. If this is not correct, I will need your instructions to locate it.
I will ask because I don't always understand
what you are asking of me. Thanks.
>Date: Thu, 21 Jan 2010 14:23:36 -0500
>To: [email protected]
>Subject: Re: Flash Player Why does't
>Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?
>
>Hi,
>My comments are within your text below. Let me
>know what I missed or misunderstood.

Why does abode not work on my galaxy tab2

Why does abode not work on my galaxy tab 2?

The games dont load they just say I need to update to the latest version or say that it is not compaterble with it.

Why does sound not work on my Mac Air?

Why does sound not work on my Mac Air --all setting seem okay. OSX 10.9.2 operating systyem.

Open System Preferences > Sound > Output
Make sure the coorect output devices is selected and the Mute button is not checked.

CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3. Why does it not work any more? Thanks!

Hi,
CTRL+P requires manual tab focus when printing a PDF within FF4. This worked fine in FF3 - i.e, you could just select the tab. Why does it not work any more? Thanks!

Hi
https://discussions.apple.com/thread/4325038?tstart=0
CCT

Why does Firefox not work here in China anymore, since January of 2015?

I have used Firefox for years, as the fastest and most reliable browser for me, esp in China... not anymore! Last month (unknown to me) a hijacker called Vosteran took over my Firefox browser. I finally realized it and got it cleaned up using Malwarebytes anti-malware, and downloaded a new Firefox... now SAME problem exists, even with Vosteran removed!
Firefox will not allow me into ANY normal sites, saying they don't have the proper security code. This includes my Yahoo front page, email account, ESPN and other common sites that are certainly NOT dangerous. So, WHY does Firefox not work anymore? It is useless to me here in China the way it works now.

hello rickinchina, first please make sure that the '''date, time & timezone''' are set correctly on your system and that firefox is set to directly connect to the internet (that's the "'''no proxy'''" setting in the firefox ''menu ≡ > options > advanced > network > connection - settings...'').
if this doesn't solve the issue (or it is already set properly), a possible solution depends on different factors:
* what is the '''error code''' shown under ''technical details'' on the error page?
in case the error code equals ''sec_error_unknown_issuer'', please attempt to add an exception on the bottom of the error page (but don't do it for real) and inspect the certificate (see the screenshot attached for instructions):
* which '''issuer information''' does the certificate contain?
please report back with those two pieces of information. thank you!

Why does iMessenger not work/takes ages to load?

Why does iMessenger not work/takes ages to load?
- done all the log in stuff (username and display name but then takes for ever to load so just give up!

How has it stopped working?
ARe you on wifi or cellular data?

Why does installation not start after the message "setup wants to make changes"?

Why does installation not start after the message "Setup wants to make changes. Type your password to allow this"?

Hi
It wants your system's admin password. Standard procedure on Mac for non-admin users
Thanks

Why does Safari not respond after loading OSX Mavericks on a MacBook air

Why does Safari not respond after loading OSX Mavericks on a MacBook air?

What exactly happens? Does it launch at all? Have you tried rebooting?

Why is Adobe not working after I've downloaded the recommended updated version??

Why is Adobe not working (I don't get even a picture!!, let alone audio) after downloading the recommended "updated version?"

When I try to read the news clips...like OMG, or any of the "gossip" that involves a short video clip, a screen pops up saying that there's a new version of Adobe, which I should update to. So I updated it...by the usual clicking where it says to click and I can see the new version being added. But, after it's finished updating, I don't get even a picture...or sound...of the usual OMB lady speaking, nor do I get the video clips of any of the "gosspi" items or trailers, or anything else.
There's just a big, blank space where the video would normally be showing.
I could see the updates taking place on a separate screen that pops up, too. It took a minute or so to finish. I've done it at least 5 times, but I still get just a blank space in place of the picture and sound that used to pop up! (The video clip of the father who jumped out of a moving car to pick up his daughter, who fell out of the car onto the road, for instance, does not appear...just a blank space!)
I hope this clarifies my problem.
What's "OS?"

Why Does 3G Not Work on my IPhone

Apologies everyone - I am a real numpty with my IPhone. I have switched just about everything on i think I need to to enable 3G and my service provider says that in my present location the wireless service is excellent. So why is that on my top toolbar I don't see 3G - just my signal strength, service provider and a round circle then the date. I cannot get connectivity unless I am at home next to my own router. Can anyone help as I have had this problem now since I have had my phone and I really do need to get it sorted out. Any guidance at all is very welcome indeed.

Hi,
What type of iPhone do you have. I heard that 3G cannot switched off on an iPhone 4s, so if you have that one, it can only be a service provider issue (worst case: Your antenna does not work).
Did you try on a different location, like downtown?
If you have an iPhone 4 or 3Gs you can check if 3G is switched off: Go to settings->General->Network. At the top there is a 3G switch that should be on (blue).
Let us know if this works.

PSE11 Why does Sharpening not work in Quick or Guided Mode?

I have used PSE 5 happily and greatly liked the auto sharpen feature. I have been forced to upgrade to PSE 11 due to Windows 8 incompatibility with 5.
I am appalled to find that the sharpen feature, including auto, does not work in Quick or Guided modes. The small previews in Quick mode show the correct sharpening effect but clicking on them or using the slider does not transfer to the main image. I either have to go into full unsharp mask, which I hate for quick fixes, or use the 'adjust sharpness' option under 'filter' in Quick or Guided Mode, which increases sharpness by an unspecified amount on each click.
Surely there si something wrong here. The feature is there so why doesn't it work?
Any ideas would be welcome. If it isn't fixable I shall want a refund based on the product not being fit for purpose.
Thanks
dlgoodyear

Thanks for confirming that it should work ok. I've now done the obvious and uninstalled/reinstalled and it's fine now.
Dave

Why does hotmail not work when I open it with firefox?

When I open firefox in safe mode hotmail is functional but when I open firefox normally hotmail does not work. I can't seem to find out what add ons I have.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
If it does work in Firefox Safe-mode then disable all extensions (Tools > Add-ons > Extensions) and then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why does AttachMovie not work after a loadClip?

Similar Messages

Maybe you are looking for