Why does Audition CS6 limit me to 3 minute recording sessions?

Recently, Audition has limited my recording times to only 3 minutes and I have no idea where to change that restriction.
I am running Audition CS6 on an iMac with Mountain Lion, trying to record to a mono-audio track.
Can anyone offer a solution to my problem, please?

I'm guessing slightly, but t's just possible that your default session has been saved to one with only three minutes of time in it.Try opening a new session using a different template and see if the same thing happens - if this fixes it, you need to redo your default session to one without this limit!

Similar Messages

Why does my iPad limit me to 5 minutes before auto-lock?

My iPad multi-lock menu only offers 1 minute and 5 minutes as options for timing. Same for pass code. Why is that, when others have lots more options and even "Never"?

Did your iPad come from work or school? If it's administered by others then they have the ability to limit the autolock to protect the data on the ipad

Why does InDesign CS6 forget my preferences when I re-start?

Why does InDesign CS6 forget my preferences when I re-start? Not every time, but often. It's very frustrating to have to re-enter all my prefs. Every once in a while I start up InDesign CS6 and the new document dialog shows page sizes in po (I always use inches) and the prefs all seem to revert to default.

Do you have a Windows PC and when shutting down, is Indesign still open? If so, this can result in a damaged preferences when still writing while Indesign is being terminated by the system.

Why does illustrator cs6 crash or lock up?

why does illustrator cs6 crash or lock up when i try to save any file that has a placed image in it?

Please follow these steps:
Open the “Task Manager” when the Adobe Illustrator CC crash window is displayed.
In the Task Manager window right-click on the name/string “Adobe Illustrator CC” and select the option “Create Dump File” in the context menu
It will display a dialog which says that it will create a file “Illustrato.dmp” in your “Temp” folder. Click on OK to create this. Wait for the action to get this completed.
Once the above file gets completed you can have this file by typing “%temp%” in your “Run” window (press “window button + r” on the keyboard). On clicking the enter key the TEMP folder can be opened.
Look there for the file name “Illustrator.dmp” and share it with us a dropbox link on [email protected]
Please also mention the thread link when sending the dropbox link.
Regards,
Dhirendra

Why does Premiere CS6 drop frames in capture?

Why does premiere CS6 drop frames when I capture from my Canon Visia HV40 via Firewire 400
Bob Lamb [email protected]

1st, more computer information might help... such as the Information FAQ http://forums.adobe.com/message/4200840 questions
2nd, some other software to try... to see if the problem is with your computer, or CS6
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html -and http://forums.adobe.com/message/4708997
I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import pdf?

Mac OSX Lion: Why does PS CS6 BETA stop responding after attempting to import single pdf or multiple pdfs? frequently happens(2/3 times)

Can you provide any more information about the files that are causing the problems? Are these particularly large files? Many pages or images? Have you opened these files in Photoshop CS5, or other versions of Photoshop?
What do you see when you try to import these PDFs? Do you get the PDF Import dialog, allowing you to select pages or images from the PDF? Is so, is it hanging when you click OK or at another time?
Any more details about the problem or other info (as well as sample files) you can provide, the easier it will be for us to help identify the cause of your problems.
Paul

Why does my mouse keep losing connection every minute

why does my mouse keep losing connection every minute, its not the batteries

I'm having the same issue. Every so often it loses connection then re establishes. This goes on repeatedly.
If you change batteries while the computer is still active then it takes for ever to re connect.
Can't wait until someone replies to your question.

Why does the CS6 Master Collection Suite take up so much RAM on a computer??

so, if, i brought the CS6 Master Collection Suite i would need more RAM on my computer right?
because, my apple computer only has 4GB of memory and that program needs 4GB of RAM.
I would need to add more memory to my apple computer say upgrade it to maybe 8GB of RAM??
But, i don't understand why does that suite need so much memory or RAM on a computer??
could i just only download the programs i really need onto my apple laptop and maybe that
would free up some memory or RAM so that the program wouldn't end up using all of the memory
on my computer could i just do that??
Message was edited by: mzpretty3

Mzpretty3 you can find the system requirements for CS6 Master Collection at http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html#CS6_Master_ Collection_system_requirements. For Mac OS we recommend a minimum of 4 GB of RAM and if you are going to do heavy photo or video editing then you will want to have at least 8 GB of RAM available.
Please also be aware that the installation will require at least 15.5 GB of hard drive space. This is separate from the amount of RAM which you have installed.

Why does Bridge CS6 require TMP to point to the C: drive?

After much hassle I got Photoshop to work but Bridge always fails with the message
"Failed to write to temporary folder (V:\tmp). Please change the
environmental variable TMP to an existed folder on the C: drive"
Ignoring the questionable grammer for the moment why does Bridge care where my
TMP directory is? CS5 doesn't care. None of the other programs installed on this
system care. Bridge is absolutely adamant, though. Give it temp space on C: it's
perfectly happy. Put it anywhere else and no way at all... Where was Adobe QA when
this was tested??
Tom

Their vision of releasing a high quality product was, shall we say, clouded.
Geek translation: More and more companies figure they can release whatever they have on hand and fix it later via the software update process through "the cloud".
Thinking clouded by the promise of quick profits.
-Noel

Why does my ping increase after a few minutes of resetting AirPort?

I connect various phones and my Macbook Air to WIFI using my AirPort Express. I have been plagued with WIFI and ISP problems and recently upgraded my modem to try and fix this issue that persists to this day. I feel like I have narrowed down the problem to my AirPort Express.
After resetting my Airport everything appears to be running smoothly. My download/upload speeds are adequate, I have a very strong WIFI signal, all is well. When I go to play online games I notice an increase in my ping within 10 minutes of resetting my Airport. It happens fairly abruptly - it is not an incremental change. For example I am usually jumping from ~100ms to ~450ms. This happens on multiple servers and can't be tied to one host.
After resetting my AirPort my ping goes back down to normal but jumps up after a few moments. I have my Arris modem set to bridge, and I've tried connecting to the 5GHz channel through the router and there doesn't seem to be any difference.
This problem started a month or so ago. The AirPort has worked absolutely perfectly for a couple of years now. It is really only the ping in online games that seem to be effected – my download/upload speeds are running well which has me stumped.
AirPort Express
Version 7.6.4
Serial number C86HV4YPDV2R
I really appreciate any help! I am out of warranty with the device to call apple and I've spent more than a lifetime on the phone with TWC.

Wireless is extraordinarily complicated. It is more a wonder that it works that doesn't.
Two follow up questions. First, I have taken both the phones in the household off wifi as well as my Roku and that didn't make any noticeable differences.
It is worth a try.. it is wireless after all.. voodoo in another medium.
your answer doesn't really help with two issues. My computer used to connect with no ping increase before this sudden change and why does this change start happening after a few moments of clarity and then skyrocketing pings?
How old is your Express? Anything more than 3 years can suffer due to build quality.. apple is no different to other brands now. A sudden change can indicate poor internals.
7.6.4 is lousy firmware.. test with 7.6.1 if that is possible. (newest ones may not downgrade)
I personally have heaps of Extreme and TC but avoid the express.. it is expensive for what it is.. a very low end wireless AP that can double up as a router at a pinch.
If you have an old Express that you upgraded the firmware.. you may not have noticed the upgrade coincided with the poor pings.. but it can happen.
Also Mavericks.. if you upgrade installed mavericks it can have dire effects on the wireless.. even the latest update to Mavericks has been causing wireless issues. Mavericks and networking is somewhat akin to tin cans and wet string. With the string fraying.
So reset to factory.
Downgrade the firmware.. then reset to factory a second time..
Test it with short names, no spaces and pure alphanumeric.. NOT apple names.. since mavericks changed to SMB networking from AFP in previous versions.
Downgrade firmware by holding down the option key whilst you select version number. Pick from the list that will appear.
Test close to the Express..
Test with no wireless security.. remember it is a test.
Run the wireless diagnostics on the computer to see if it shows anything.
About Wireless Diagnostics
The reason for increase in ping times, can be link speeds dropping, WMM failing.. as it seems to .. or just plain old bad drivers.
I have made huge improvements in things like latency in routers that allow actual settings on the wireless to be changed.. packet size in particular.. one serious issue here is Apple have not given us access to any settings.. in airport particularly but even in the Mac.. this stuff is hidden from end users.

Why does Bridge CS6 destroy my SWF files after inputting Meta Data?

I save a swf file to my hard drive. Then I open Bridge, select the swf file, and type some Meta Data into the panel on the right. As soon as the data saves and the preview window refreshes, the preview renders completely white (Bridge can no longer preview it). If I open the file in Flash, some layers and text are now missing.
It seems that the act of writing meta-data to the swf file actually destroys portions of the file, and I have to go back to the original and re-export.
We have reproduced this problem on both Mac & PC, on swf files of varying compression & XMP settings. It is fairly consistent.
Has anyone run into this and if so does anyone have any suggestions?

Not a expert on swf files, but this article says you can not use Bridge to add metadata to SWF files. So maybe that is why you are running into problems. http://forums.creativecow.net/thread/190/862442

Why Does Premiere CS6 Output 29.97fps when Encoding to 23.976 fps?

My project is XDCam EX, 23.976 fps. I exported to DVD MPEG and both VLC and Windows Explorer details report 29.97fps file format.
I downloaded the latest updates two days ago. Just wondering why the encoder refuses to leave 23.976fps footage and project alone and convert it to 29.97? Render settings are clearly 23.976fps. Bug?

i didn't read the forum i linked, so yes, i was wrong in the way adobe converts it to 29.97, pulldown vs added frame. the output file will be reported as 29.97, but mediainfo can see the flags and reports it as 23.976 with 2:3 pulldown. when i look at the .m2v file from premiere, frame by frame i can see the two interlaced frames from pulldown. so are those true interlaced frames or does the media player program generate those interlaced frames as a result of the flag telling it to?
Telecine - Wikipedia, the free encyclopedia
Wiki:
Reverse telecine (a.k.a. inverse telecine (IVTC), reverse pulldown)
Some DVD players, line doublers, and personal video recorders are designed to detect and remove 2:3 pulldown from telecined video sources, thereby reconstructing the original 24 frame/s film frames. This technique is known as “reverse” or “inverse” telecine. Benefits of reverse telecine include high-quality non-interlaced display on compatible display devices and the elimination of redundant data for compression purposes.
my understanding is the interlaced frames are real. it is 29.97fps, with 2 of 5 as interlaced. the reverse pulldown reconstructs a single frame from the two interlaced, dropping the fps to the original 24p. is this not the case with adobe's pulldown?
media player:
Video: MPEG2 Video 720x480 29.97fps 7000kbps [Video]
Audio: PCM 48000Hz stereo 1536kbps [A: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s]
mediainfo:
Frame rate
: 23.976 fps
Standard
: NTSC
Color space
: YUV
Chroma subsampling
: 4:2:0
Bit depth
: 8 bits
Scan type
: Progressive
Scan order
: 2:3 Pulldown

Why does Photoshop CS6 blink on Windows 8?

When using Photoshop CS6, my screen blinks and flashes, especially when using editing tools or adjusting the image (increasing/decreasing size.) I am an Adobe Cloud member and using a new machine that has Windows 8 which I am still getting used to. I had been using my CS apps on my laptop/W7 with no problem whatsoever. Not sure if the OS makes a difference. Suggestions? Thank you.

This may help some people. On another site: http://www.tomshardware.com/forum/342967-33-switching-onboard-graphics-nvidia-graphics-car d
A gentleman replied to the question of how one switches from the onboard (not so powerful) graphics processor to the video card (very powerful) using software in the case of nVidea cards. It is easy, and might work out some of the kinks. I have switched and will now try to see if I can mess up PSCC using the higher setting. bbiab
Yes, this is called 'Optimus Technology' developed by nVidia, where your main graphics card is the integrated one and it works together with nVidia dedicated/discrete graphics card to deliver great performance but still save battery live. It's basic, the nVidia one is powerful and the Integrated one is not. But the nVidia one is power hungry and quickly put down battery very quick, where the integrated one does not. So what nVidia do is, when you are gaming, they automatically switch to use the nVidia so the performance is high. When not gaming, you turn of the nVidia one and switch back to the integrated graphics. But this does not work when you don't set it up yet. Don't worry, it's not hard and does not require change on hardware, only software. The first thing to do is, go to your nVidia driver by right clicking on your desktop and choose 'nVidia control panel'. If you can't find it go and download the driver. After you are at the control panel of nVidia, in the left side of that window there is 'Manage 3D settings' Under the 'Select a Task'. Click on that and you see in the other part there is a 'global settings' tab and 'program settings'. Go to the global one and in the 'preferred graphics processor' choose 'High Performance nVidia Processor'. You should then have the optimus technology when you choose apply. The 'program settings' in the other hand is to choose what graphics card you want to use for each program of your preference. So you choose on your program and select your preferred graphic card there.
P.S. Some programs are sadly not supported by the Optimus graphic card, so which means that the program will still run in the main graphics (which is the integrated graphics) and you still have the integrated performance. To get rid of this issue you must to contact your nearest ASUS service to disable the optimus technology.
Sorry for grammar mistakes............."

Why does Encore CS6 quit during startup and how can I get it to stop?

I am using Encore CS6 on Mac OSX 10.9.1. After spending all afternoon purchasing, researching and downloading the newest Encore (because CS5 would no longer burn anything on the new operating system), every time I open Encore, it unexpectedly quits. There is no error message, it loads Encore to the point where you can see all the Encore windows, and before asking whether you are opening an existing project or starting a new project, the program quits. Any help would be greatly appreciated, thanks!

Encore is not supported on that OS, and may not work http://www.adobe.com/products/encore/faq.html
Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to http://forums.adobe.com/community/encore and, in the area just under Ask a Question, type in
maverick
or
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question
Do the same at http://forums.adobe.com/community/premiere

Why does opening CS6 cause my display colours to change?

Hi guys,
My problem: Whenever I open CS6 (Photoshop, Illustrator...) my display colours on my laptop change. WHen I close the colours shift back to me defult settings. The Image mode is on RGB.
I have a new MacBook Pro with 6GB of RAM.
Any ideas? It's making work (digital advertising) difficult.
Thanks,
Alex.

I have tha same problem on the same Mac with CS6 Design Standard.
And I don't know how repair it.
Maybe does it happen for the switching of the graphic card from Intel HD to Nvidia GeForce?

Why does Audition CS6 limit me to 3 minute recording sessions?

Similar Messages

Maybe you are looking for