Why does battery percentage decrease even when new iphone5 is plugged into power?

My new iphone5 seems to lose charge on occasions whilst I am using it and it is connected to power ?

Something is running that is consuming power faster than the charger can replace it.

Similar Messages

Why the battery percentage decrease continuously while charging?

Why the battery percentage decrease continuously while plugged in??

Is it PLUGED into USB or the mains If mains try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. Bsydd uk

Why does my MacBook stop working when I tr to plug in my iPad to do some file syncing?

Why does my MacBook stop working when I try to plug in my iPad to do some file syncing? This is the second time I have had it happen to my MacBook. The computer just shuts down and cannot be restarted. When I plug it into the charger I get a faint Green light where it plugs into the MacBook. When I took the computer into my local Mac store last time this happened (Nov 2012) they reckoned they couldn't find anything wrong with it. Has any body else encountered a similar issue?

That would be a filter, yes. Didn't know Verizon handed out phone/DSL wall split filters. I would honestly take a look at the physical jack it is connected to for corrosion or lose connections as I doubt the filter is bad out of the box. Anyways, what was the original problem you had with the Phone and DSL that prompted Verizon to send out a filter?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Why does firefox update itself even when i tell it not to? Everytime it updates itself it messes up and crashes, make it stop. I like firefox but if I keep having to unistall and reinstall it ever month to every other month I am going to be done with it

Fire Fox updates itself even after I tell it not to. The new version it updates to crashes, adobe flash player doesn't work on it and it takes forever to load when it does work. I have used fire fox for years now but if this keeps up I will find something else to use.
== This happened ==
A few times a week
== When you came out with fire fox 6.6 or whatever

I also have this problem of Firefox updating by itself even when I turn off auto-update.
For whatever reason, there are situations where you do not want to update or download a large file, because you're working offline, have a slow connection, or have a very low download allowance etc. Usually the update doesn't work and cause Firefox to crash. After that it cannot be started again. This is with Firefox Portable but I think I've had this problem the normal Firefox. With the portable version I can just back up a single folder but it is still time wasting and annoying.
I've noticed that when I start Firefox with auto-update turned off, it changes the options to auto-update, it also does this periodically. So every time I start Firefox I have to turn off auto-update, and I have to do this from to time because Firefox will by itself turn back on the auto-update.

RANT: Why does screen keep dimming even when "DIM" is disabled?

ARGH this is buggin' me!
I turned off the dim under custom in energy saver. i am reading a document and it keeps dimming and it's annoying as doo doo. anything i can do?

What about the option of "Automatically adjust
brightness as ambient light changes" in
Preferences/Displays?
William
William - anyone with this problem I can guarantee
shut off every screen dimming option.
I have this issue. It seems to be intermittent.
What seems to improve it - Restarting, or unplugging
and re-plugging in the mag safe charger.
These have been my only solution. I have even turned
off all display changes for battery power so that
there shouldn't be any "confusing" factors for the
computer.
I wouldn't care so much about this issue if it wasn't
for the screen whine with decreased brightness.
I trust apple will fix this with software or firmware
updates.
I checked my 1.67 PB 15", it does what is being described. Software?
William

Why does my volume say headphones when they're not plugged in

MY phone is saying the headphones are plugged in when they're not. There are no sounds except ringing. Help!

You may want to plug/unplug the headphones several times fairly quickly to see if that resolves the issue.
If not:
http://support.apple.com/kb/TS1630?viewlocale=en_US

My ipod wont turn on, even when i have it plugged into the car or computer

I've had this problem earlier, but when I plugged my ipod into the car charger and held down the menu button, it turned on. My guess is that it just completly died. I have checked to see if the hold button was on also. I've even tried plugging my ipod into another computer, but still the same thing. I've been trying to read up on other similar problems, and i was wondering if i had to leaave my ipod unplugged for over 24 hours ( i heard that's what you have to do to solve some other problems.)
thanks for your time, please help me

If you haven't done so already, check out these. One of the recommendations is to leave it for 24 hours.
iPod won't turn on.
iPod battery doesn't charge.

Firefox freezes, must be restarted when acer laptop unplugged/plugged into power source

I have an Acer 3820 that has been pretty solid. Lately, though, every time I plug in or unplug my laptop while using Firefox, the screen freezes, and changing tabs changes which 'tab' is on top, but the content is still the same as the one that it was changed from. I have to close firefox, which brings up the box warning me about closing several tabs - this box is, however, completely black. Upon restarting the program, everything is fine until the next time I plug in/unplug. All my drivers are up to date, as is Firefox, and all of the add-ons I have have been on my Firefox for long before this problem started occurring.

You'll need to stop restoring and backing up your phones. The best way to literally start from a new baseband software is to create a new user account on your computer. Here are the instructions:
1. Setup new user on computer (make sure your contact data and basic information is backed up in applications like Address book and Mail)
2. open itunes (without iphone plugged in)
3. Shut down iphone
4. Hold the home button (while off), then plug it in. Continue holding the home button until it turns on and appears in"recovery mode" in the itunes application
5. Release home button and resync basic data such as contacts and mail accounts
6. Test the phone after doing this to see if the data is properly synced and the phone works well so far
7. proceed to syncing all your music and apps
WARNING:
Fixing the phone this way will fix the freezing problem, but will not perserve temporary or saved data from your phone such as game account information, scores, notes, text message archives, etc. The most likely cause for the freezing is a discrepancy between the backed up data and the restored (IOS 4.0) software. Setting the phone up as a new iphone without restoring it from any backups is the best way to solve this problem AND operate iOS 4.

Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

Question
why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

See also "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? :(

Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? I have all of billing info up to date, changed my password etc etc and still get an "unknown error" message. Help!

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store and sign out and then sign back in.

Battery percentage decreasing while charging!

Preface: Please forgive my technological ineptitude in advance. I am completely computer illiterate and have embarrasingly little tech vocabulary.
Okay. Help! While my MacBook Pro is plugged in and charging, the battery percentage is going DOWN instead of up. Yikes. If I stop using the computer, close it and let it charge, the battery percentage goes up when I check it after 20 minutes or so. As soon as I start using it while it's still plugged in however, the battery drains (goes down even though it's plugged in). I've pasted the System Report on Power below (I have no idea what any of it means), the recommendation was from another topic forum. Does anyone know what is happening w/ my laptop? It should also be noted that this is a brand new charger (60W MagSafe Power Adapter), but was still happening before with my old charger before it died (the magnetic piece detached from the part you plug into the computer). Also, it seems to be getting really hot (the new one AND old one!) Thank you for your help!!!
Battery Information:
Model Information:
Serial Number:          W0113445WD3BA
Manufacturer:          SMP
Device Name:          bq20z451
Pack Lot Code:          0
PCB Lot Code:          0
Firmware Version:          201
Hardware Revision:          000a
Cell Revision:          158
Charge Information:
Charge Remaining (mAh):          4428
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          5045
Health Information:
Cycle Count:          496
Condition:          Normal
Battery Installed:          Yes
Amperage (mA):          -868
Voltage (mV):          11995
System Power Settings:
AC Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          10
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Wake on LAN:          Yes
Current Power Source:          Yes
Display Sleep Uses Dim:          Yes
PrioritizeNetworkReachabilityOverSleep:          0
Standby Delay:          4200
Standby Enabled:          0
Battery Power:
System Sleep Timer (Minutes):          10
Disk Sleep Timer (Minutes):          10
Display Sleep Timer (Minutes):          2
Wake on AC Change:          No
Wake on Clamshell Open:          Yes
Display Sleep Uses Dim:          Yes
Reduce Brightness:          Yes
Standby Delay:          4200
Standby Enabled:          0
Hardware Configuration:
UPS Installed:          No
AC Charger Information:
Connected:          Yes
ID:          0x0100
Wattage (W):          60
Revision:          0x0000
Family:          0x0085
Serial Number:          0x009b16e5
Charging:          Yes

Sofia925 wrote:
. As soon as I start using it while it's still plugged in however, the battery drains (goes down even though it's plugged in).
This is normal. When cpu/gpu intensive activities are run, sometimes computer
may draw power from the battery.
Try resetting SMC.
1. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own"
Best.

Why does the clone stamp work when I go from a darker colour to a lighter colour but not the other way around. How can I lighten up a dark area? Lasso tool takes from the wrong area too.

Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.

c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem.

Why does my Iphone 5 ring when I get a call, but can not figure out why there is NO sound when I get a text?

Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???

Deborah,
The solutions on here did not work for me.   I tried.....
I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
(1) I have "do not disturb" scheduled correctly.   No partial moon on the main screen near the time and battery indicator.
(2) I have the ringer icon correct with no slash.    Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side.   I tried messaging with the bell as shown and bell with a slash and neither work.   The mute switch is not red (switch above the + volume hardware switch)     I enabled some assistant using the Settings menu.    And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
(3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds.   But they do not link with the actual hardware.
(4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
(5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes.   And the upgrade was successful but did not fix the text issue.
(6) I do not have it in airplane mode or silent mode.
(7) I reset all settings using Setttings > General > reset > reset all settings . this wipes settings but not data and media.
This is really frustrating.

Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

Why does ID create a CSS when option is not selected in export to ePub?

I am using InDesign 6 to create ePub books. I want to use my own CSS so in the Export to ePub options I am leaving the setting "Include Style definitions" unchecked. I then list my CSS under additional CSS. When I create the ePub and then examine the files included I see that there are 2 CSSs, mine and one created by InDesign. Why does InDesign create a CSS when the "Inlcude Sytle definitions" is left unchecked?

Because that is the way that CS6 exported EPUB.
EPUB is a fast moving target and has moved way beyond what CS6 can export. With each update from InDesign CS6 to InDesign CC to InDesign CC 2014, and even to the latest update to CC in October, there have been major changes to how InDesign exports EPUB. It no longer does it that way, and you have much more control over the process in InDesign CC.
Because InDesign CS6 is never going to change, it's best to work at modifying what they do export, unless you want to upgrade to InDesign CC.

Why does battery percentage decrease even when new iphone5 is plugged into power?

Similar Messages

Maybe you are looking for