Why does bios 1.8 not have the option for 1T timing?

I was just wondering why I don't have the option with bios 1.8 in my k8n neo2 platinum to run 1T command rate? I use it with memtest+ and a64tweaker and it works fine.. I just want to turn it on without software..

look around some more on the forum, there have been some BIOS betas released and can be studied about that may help you if you need a fix now... I know were alll eagerly awaiting aBIOS that will enable dual core for Neo 2 plat, at least I am, but then again I don;t KNOW for sure you'll have too do some research

Similar Messages

Why does my iPhone 4 not have the panorama feature with the new iOS 6 ?

Why does my iPhone 4 not have the panorama feature with the new iOS 6 ? Can someone please explain this to me. I was already excited about it.

That was made available in iOS 5. To update, you may need to connect to iTunes

HT4623 Why does my iPhone 4 not have the Software update option when I go into the settings?

Why does my iphone 4 not have the Software update option when I go into my settings to get updates?

That was made available in iOS 5. To update, you may need to connect to iTunes

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Why do I not have the option for my mini bridge in photoshop?

I have a MAC and photoshop CC 2014 and I do not have any option to open mini bridge or even view in mini bridge anywhere in my settings, options or where it should be at the bottom of my photoshop.
Does anyone know where it is or why I don't have it?
Thanks,
Nicole

Thank you. I was finally able to take to tech support too and they tell me it has been removed. Thanks again. I will take a look at the link.

I do not have the option for hotmail on my iphone

I want to add my hotmail account to my iphone 4 all the directions to do this are saying select hotmail in mail settings but i have no option for this i have yahoo exchange google aol but no hotmail help

Outlook - right below AOL.

Do not have the option for the universal counting leader in project asset menu

I don't seem to the option for a universal counting leader under the "new item" action, located in my project asset menu on expert view. I am using Premiere Elements 13, on a Mac, version 10.9.5. The others are there -- adjustment layer, title, bars and tone, etc, just not the universal counting leader. Any ideas?
Thanks!

inatgybderstorm
The Universal Counting Leader is there in Premiere Elements 13 Windows 7 64 bit.
I am strictly an Elements Windows user so I am not sure of the history of the Universal Counting Leader in Mac versions.
If you do not find it, it is probably one of the Windows Only features when one compares Windows Mac versions of the program.
Unless a Premiere Elements 13 or earlier Mac user comes forward to confirm one way or the other, I going with this one being a Windows Only for
Premiere Elements 13 and possibly earlier versions as well.
ATR

Lync 2013 click to call from Outlook 2013 does not have the option for Lync call

Hello,
We are currently migrating from OCS 2007 r2 to Lync 2013. We are on office 365, but Lync is on premise. After migrating several users the option in Outlook to click to call someone only shows one option, which is to call the person's desk phone. Before there
was a dropdown where you could choose desk phone, mobile or Lync call. This issue isn't happening to everyone. We are using Office 2013 and Office 2010. Please let me know if you have suggestions or if you need more info.
Not sure if this is related, but some people have lost the option to view their contact's pictures.
Thank you in advance,
Mitch

Hi,
Please see the image below, are we talking about this?
If a contact doesn't have a phone number, we surely can't call him.
You can try updating the Offline Address Book to see the result:
http://www.howto-outlook.com/howto/oabupdate.htm
If I got anything wrong, feel free to post back.
Regards,
Melon Chen
TechNet Community Support

HT4528 does my 5c with verizon have the option for a sim card

does it have a sim card slot i have mine through verizon

but Verizon doesnt use sim cards in USA there for international use thats what a verizon rep told me on the phone but in the next yr or 2 they will be using sim cards like all the other cell carriers here in the u.s.a.

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor and premiere it? Working with two cinema display and PN- K321 and I can not preview the output video at 4K for DisplayPort, whereas with premie

Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problems

Look, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely.

Why I do not have the option to choose Wi-FI

why I do not have the option to choose wi fi it is grayed out on my Ipod

Not a good sign. If the following does not resolve the problem then it is a hardware problem and an appointment at the Genius Bar of an Apple store is required.
iOS: Wi-Fi or Bluetooth settings grayed out or dim

Why does my new ipad2 not have ios5 or cloud?

why does my new ipad2 not have ios5 or icloud ?

There are still some stock being sold with iOS 4 installed, but they should be getting rarer - if you don't have iOS 5 (and therefore the iCloud) then you can update to it for free : http://support.apple.com/kb/HT4972

I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?

I have a gen 3 ipod and can't get it into disk mode. In itunes it does not have the option and I cant figure out how to do it on the ipod touch itself. Any ideas?

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Why did my upgrade to Maverick result in my not being able to access my Documents in the previous format? Why did I not have the option to change my 'filing' system to use the new 'Tags'? Had reinstall 10.8.5 to access my Documents

Why did Maverick not enable me to access my Documents in the previous format (Grid) and when using the alternative I could not 'clik' to open them. The same applied when I tried to open documents from within my back up disc (LaCie). I had to reinstall 10.8.5 and back up from my LaCie (thankfully) to gain access to all my critical Documents? To deal with this I spent 3 and hlafg hours on telephone to Apple Support ( very helpful - but unable to resolve issues - then 3 hours in Apple Store (again very helpful but only able to assist by clearinng Maverick from my HD and reinstalling 10.8.5. Fortunately LaCie came to the resuce and I was able to back up Mac HD with all my documents but lost about one week of work....!!
Why did I not have the option when upgrading to Maverick to select the new 'Tag" system which I did not want?

10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.

I want to restore the secret question and I does not have the option of sending e-mail to restore

I want to restore the secret question and I does not have the option of sending e-mail to restore

Go here, find your country and follow the directions to contact Apple for help.
http://support.apple.com/kb/HT5699

Why does bios 1.8 not have the option for 1T timing?

Similar Messages

Maybe you are looking for