Why does bouncing lower the audio level of my music extremely?

Whenever I bounce music from the timeline, the result of the audio file is extremely lowered. I tried taking 'normalize' off but that just distorts the file. Help!

there's a lot of variables in this, so before we determine WHY the volume is being lowered, let's first be absolutely sure the volume is being lowered, and not something else.
do this...
Bounce a mix from a Logic session, and re-import this stereo file back onto a stereo track, with the volume set to unity gain (zero).
Solo this track, and hit PLAY
Assuming you haven't changed the volume of your playback speakers, is this bounced file playing back at the same volume as the song session file?

Similar Messages

  • Why does laptop stop the audio for a few seconds when I play a video then resume for the video?

    Hi I have a HP Pavilion G6 2288-ca with amd a10 vision processor. So I was playing some videos from youtube and the audio stoped and resumed a few seconds after.

    Flash is required for YouTube content.
    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Not empty the Safari cache.
    From your Safari menu bar click Safari > Preferences then select the Advanced tab.
    Select:  Show Develop menu in menu bar
    Now click Develop from the menu bar. From the drop down menu click Empty Caches.
    Now try a video.

  • When burning edited footage to DVD the audio levels are low.

    I have edited video footage in FCPX for which the audio levels appear fine but when I burn it to DVD and watch the footage, the audio is very low. I have then increased all audio levels in the editing footage to + 12db and burned it to DVD again. Even thgough some of the audio are downloaded tracks from itunes all audio still seem to be quite low.
    Am I doing something wrong.

    Is your project audio set to surround or stereo?
    In the project list select the project and then click on the spanner icon at bottom right of inspector.
    It will tell you. and you can change to stereo if that is what you would normally use.

  • Lets get Apple to increase the audio levels again

    Hi everyone! Well, I sold my 2.16 C2D on eBay and I just bought the new 2.2 model. I broke even selling the old and buying this one. So I think its a great deal. Anyway, I'm happy with the new machine. Speed and everything else is the same to me but the graphics are killer. Way better than the 128mb x1600. So far I've only tried it out on call of duty 2 but I'm more than satisfied.
    So my reason for starting this thread is that we should all write to Apple's feedback section (which I can not find right now) and let them know that we would like the audio levels to increase again just like in 10.4.9.
    The audio was low up to 10.4.8, in 10.4.9 the audio was much louder, and in 10.4.10 it went back to how it used to be. Now I know why Apple did this. It was because of all the 24" iMac users who complained about the audio being way too loud on the lowest volume setting. I know exactly how loud it was- my brother is one of those 24" iMac users. Reverting the audio level makes sense for iMac users but for everyone else its a downgrade. Especially since Apple sells a lot more notebooks than desktops.
    A solution to this would be putting out a patch for just notebook users. Its really a major issue to me and I have not upgraded to 10.4.10 on this new machine because I'm in love with the fact of actually being able to hear the speakers on the MBP.

    Are you serious? I'm running 10.4.9 right now I can't hear anything on iTunes until the 2nd or 3rd volume setting. Yes, I have sound check and everything else off.
    Don't even wanna imagine what it will be like again when I have to go to 10.4.10.

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

  • I have been editing my films and spent hours fixing the audio levels. Everytime I close and re-open final cut audio levels go back down.

    I have been busy editing my film and for the third time now, i have been correcting my audio levels with each clip  - this takes me hours - and everytime I go back to the project, the audio levels fall back down. So everything i did previously was a waste of time.
    Does anyone have the same issue? Is there anything I am doing wrong here?

    Gosh, that sounds aweful close to the same problem people are experiencing with the undo bug. They don't know their having a problme until they hit Command+Z to undo their last change, and they can't, the undo command is actually grayed out in the menu. I understand if this happens, X is not auto saving your changes either. So, the next time you make all of your changes, check to see if your undo command is grayed out from the menu. If it is, duplicate your project to force a manual save. Then Quit X and reopen it and insure you project is intact.

  • My iPhone automatically changes the audio level to max/zero

    Hi all. I have a problem with my iPhone audio level. When I'm listening to music with my head phones on, my iPhone sometimes changes the audio level max or zero all by itself.  When I try to decrease/increase the sound, it continues to increase/decrease until sound reaches to the max/zero. Restarting the iPhone stops the audio level change. But this does not solve problem once and for all. It happens time to time, but it is becoming somewhat irritating.
    Anyone have a solution for this? I've checked the internet, but couldn't find anyone have this problem. I guess I'm the only one who has this problem. Thanks in advance.
    BTW, my iPhone is 6 plus & its iOS version is 8.1.3 (12B446). Although I has been happening since I bought it in December

    I wanted to update this post. I realised a something new with the issue and found a way that I can temporarily solve it without restarting the iPhone. Right before it happens, an orange blinking light appears on the empty (white) side of the sound level at the music player. I marked that area on the photo below, although I couldn't managed to capture that orange blinking light. If I change the sound level via buttons, sound goes to max or min (depending on my button choice). Unplugging and re-plugging headphones don't affect this. After re-plugging, blinking continues. But if I unplug my headphone, then close the music player from double tapping the home button & restarting the music player, turns it it to normal. Even my sound level stays the same, at the level I configured before this issue starts happening.
    A remainder, this issue only happens after I start listening to music with my headphones. Same thing with speaker never happened. I hope this message make you all understand my issue better. I also hope that there is a solution

  • Why does quicktime only export audio

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.
    MOV files are audio and/or video content wrapped in an MOV file container. The first step in solving your problem would be to determine what codec components were used to create the source files and then determine if they are still supported by you current system configutation and/or conversion work flow.

  • Why does Adobe update the Creative Cloud?

    Why does Adobe update the Creative Cloud and not to software I purchased to the same level?

    Kurt Lang wrote:
    See also: FASB revenue recognition GAAP
    To the best of my recollection, that is what the Adobe rep mentioned. If you look up that phrase, the top return in Google is a PDF file explaining how it works. Good luck understanding it even if you're a CPA.
    John Waller has added another link on that revenue law.
    To be clear, the accounting issue called GAAP for revenue recognition states that the way Adobe counts R&D and development costs are applied to a specific product version for that version's lifetime. So, all of the Photoshop CS6 perpetual license development cost are applied against the revenue produced by that specific version. Adobe is allowed to add bug fixes and maintenance updates, but no new features for the life of that version. And, yes, this sucks for several reasons not the least of which is that the engineers are forced to try to shove as much new stuff into the most recent version and any updates that can be done prior to the end of the quarter in which a version ships because after that date, new features can't be added.
    Generally accepted accounting procedures pretty much force Adobe into this accounting. Yes, there are other accounting methods that would mitigate this, and the subscription license is one such option. Since the subscription revenue os an ongoing stream, Adobe can add new features as functionality to subscription users. Unfortunately, the users of a perperual license can not get those new features and functionality, only new bug fixes.
    The bottom line is that sucscription users get the added advantage of getting new features and functionality while perperual license users do not. Yep...kinda sucks, but it is, what it is and it's not really Adobe's fault...the accounting regulations I believe actually came into enforcement because of the whole Enron scandle...
    I realize this sort of explanation is akin to talking about sausage making...nobody really want to know how sausage is made, they just want to eat it. Same deal with Photoshop users...nobody really want to know how Adobe has to do their accounting, but the realities dictate what Adobe can and can't do...
    BTW, this all has zero to do with state sales tax...although there my be state to state differences on whether a state charges tax for software. But that has zero to do with Photoshop development.

  • When I change size of icons or icon vs list display, why does it affect the whole computer?

    When I change size of icons, or icon vs list display, why does it affect the whole computer? In some folders I want to see a list and others I want to see an icon and I don't need a large icon in all folders. I used to be able to set each folder separately in the old OS. How do I fix this?

    I can hilight an item, go to the finder/file/getinfo but there is no box next to icon view.
    I can go to view/options and adjust the icon size etc, but this applies to every folder in the whole computer. I need varied options in different folders, i.e., I want to view images as icons and text as text. I have to change it every time I open a folder. I used to be able to set it per folder in the old OS.

  • HT1338 Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?

    Im trying to watch a film downloaded from Bit Lord, I'm getting 'Error Dolby AC3 Audio". Player does not recognize the audio in this video, how do I fix this?

    Download VLC and try playing the video...
    http://www.videolan.org

  • What is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears eveery time I restart mozilla.

    what is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears every time I restart mozilla.

    AVG reports these sqlite cookies each time firefox starts. they usually belong to tribalfusion or some other tracker. How do I block them in the first place. I thought firefox is a safe browser. Did not have this problem until I upgraded to 3.6.

  • Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?

    Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?

    Did anyone find a good way to sort the shared albums better, so that the ones you share with can better find their way around.
    You can arrange them manually in an album, select all and use the Photos ➙ Batch Change ➙ Date to menu option and check the box to add a set interval between photos. That will let the photos be sorted by date and be in the order you want:
    OT

  • I have an iPod touch 4th gen. why does it show the wrong album art only on my ipod and not on itunes? Is there any way I can fix it?

    I have an ipod touch 4th gen. why does it show the wrong album artwork on my ipod and it's fine on itunes. why is that and is there any way to fix it? please help!

    I think it can't find the right or any artwork and ends up putting junk in there.
    And can happen with artist and other tags.
    probably fine with commercial media but otherwise....? I think you have to manaully go in and edit
    I also don't like how it handles and stores non-Apple iTunes store content.

  • While printing, why does PE11 crop the out put?

    While printing, why does PE11 crop the out put?

    Did you crop the photo to the same aspect ratio as your print size? If not, then the software will crop it for you.

Maybe you are looking for