Why does Captivate 2 not think I have Flash installed?
Why does Captivate 2 not think I have Flash installed? It will not start up even though I have the most recent version of Flash. It tries to redirect me to the download page every time.
The issue is actually due to the way all versions of Captivate prior to version 5 were coded. They were not able to understand the Flash Player numbering beyond a given version. Once that version of Flash Player is exceeded, they give the same error message as shown when your Flash Player version is too LOW.
When Captivate 4 had this issue Adobe provided a download patch to resolve. But you have absolutely NO chance now of getting a fix for something as old as Cp2.
Similar Messages
-
Why does Boot Camp think I have more than one partition on my hard drive?
I'm surprised I'm finding no remedy for this problem in my searches so far. My symptom is that when I run the Boot Camp Assistant app, I get the following error message:
"The startup disk cannot be partitioned or restored to a single partition." The instructions that are provided along with the error message are: "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
When I try to follow the instructions, I see that Disk Utility shows my drive as having a single partition. Nevertheless, I've backed up my Macintosh HD volume, re-artitioned the drive into a single Mac OS Extended (Journaled) volume (once using the Snow Leopard Installation disk and once using Drive Genius 3), and restored my Macintosh HD volume. After all that, I still get the same error message. I even defragged my hard drive, which seems to have helped some users I've read about, but it hasn't helped me.
Something worth noting is that I recently upgraded to a bigger internal hard drive, and before doing so, I deleted the Boot Camp volume. I innocently thought I'd just do a fresh install sometime after replacing the hard drive, but hindsight tells me that I might have fallen victim to my own ignorance.
Is there a value stored in a register somewhere that's telling my OS that I have more than one partition when I really don't? Can someone out there help me do battle against my ignorance?
I'd be grateful for any help that can be sent my way...Your welcome and good luck finding the solution. BTW as a newbie you benefit from:
Switch 101 & Mac 101.
Also you may want to reassess to see if you really need Windows on your computer. Remember if you install it you have all the issues every Windows users has to deal with. When I switched almost 4 years ago I installed Windows too but now I only turn it on to see if it still works. Of course your situation is different you may have proprietary software only designed for Windows and have to have it installed. -
Why does firefox not shutdown or have so many problems finding google start page
An error notice states (firefox is still running and not responding) on shutdown. Sometimes when I go home I get a message stating
(firefox cannot find www google.ca)- my start pageAnd just to be clear, I am not a profane person. I never type the F word...the redaction above that appears as ********** was the word F-R-I-G-G-I-N'......again, just to be clear that THIS person abides by the rules of on line civil discourse.
-
I have a DVD I recorded from my tv. I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not. My questions are: Why does my computer think it's blank? And how can I copy the DVD providing my computer recognizes there is content on it?
Thanks, SheilaTV video typically is copyrighted content. We'd be breaking several rules trying to help you. Good luck!
-
Why does color not have a 1440x1080 Resolution preset?
1. Why does color not have a 1440x1080 Resolution preset? Im using ProRes HQ in FCP and clips at 1440x1080. But when they come out of Color they are 1920x1080? I notice from color there is no 1440x1080 Res preset so strange?
2. In addition ive also noticed that I dont have the choice of 'Original Codec' in the render codec settings. Only ProRes, ProRes HQ, Uncompressed 8bit and 10bit. SO i use the higher quality 10bit.
Message was edited by: StingRay67Ok, I class myself as a patient person and not one to fly off the handle. However, Color is testing me to the limits. I cannot work out for the life of me how this application is trying to handle my footage.
I sending 1440x1080 thats been encoded 1440x1080 50i. This footage is ending up in the Color pref settings or as 1920x1080!! Secondly when I send this back to FCP obviously my Sequence will have changed to match 1920x1080.. thus up scaling the whole project! Then if that weren't enough, taking a look at the data-rates in the clip settings of the Color Sequence they read in excess of 131.5 mb/s My HDD give up immediately! (Is one supposed to render the timeline first once this footage is back from color? - i dont just mean because of the transitions etc)
Now.. to yet further confuse the issue I then do a Render ALL in FCP and the Color Sequence plays back fine though still with the wrong Resolution of 1920x1080?
to be frank, i just dont know where to start with this.. it seems 1 step forward 3 steps back each time. I can appreciate Im new to this but I thought I knew enough not to encounter such petty problems as just setting Color up for import/export. Im going to say it... Is this a Color problem or what? I dont think there are many of you using PAL with HDV into ProRes HQ or ProRes so I guess its going to have to be a £200 call to Apple? .. Which I probably wont do..
Here's hoping. -
I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?
The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about. -
Does Captivate use whatever version of Flash you have installed to publish project?
Does Captivate use whatever version of Flash you have
installed to publish project? I wondering if I delete Flash 8 will
Captivate only publish in the only version of Flash you have
installed and thus availabile on your computer?When I bring it into Flash MX, I have lost alot of my button
info. Do I have to go back and manually include that information in
Flahs MX 2004? -
Why does lion not have front row
why does lion not have front row
and what can i do to get it i loved the ease of useFront Row is not included or supported in Lion.
Read here, but proceed at your own risk -
Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.
This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.
-
I want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through the long tedious procedure each time I install firefox. It is something that should be in the options tab , and I want to know why it isn't. I am totally frustrated with firefox and getting ready to switch.
You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved -
Why does Verizon not provide 3G coverage in Western Maryland (Garrett County) and why does it not have an agreement with US Cellular for such coverage?
Thanks for the zip code pfekete. I looked into the coverage in your area and I do see you are in an extended 1X data coverage which explains why you're not connecting to 3G. What phone do you have? We may be able to advise you on how to adjust the settings so it picks up the strongest signal. I apologize for the inconvenience.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
Why does safari not save my passwords anymore? I have to keep signing into everything. Can anyone help or explain?
Check here: Settings > Safari > Private Broswing > Be sure this is stiwtched OFF.
And check at AutoFill. -
Why does Adobe not inform customers who have iPhones below 5 that Reader is not compatible until very near the end after WASTING customer’s time? BIG NEGATIVE from here
When you view an App in the App Store or iTunes Store, the listing will show what iOS versions are supported by the app.
See this posting:
How do I get a version of Adobe Reader for an IPod touch with IOS 6.1.6 -
How to display an image if user does not have flash installed?
Hi, Not all people have flash and the ones that don't will
have an unpleasant experience on my website. How can I display an
image instead of the flash itself for people that don't have flash
who visit my website? I just have flash on the upper portion of the
website. Please explain how I can do this! I haven't done flash in
a long time so be simple! Thank you!In the site you can download the SWFObject1.5.
It includes a javascript which is embeding the flashmovie
with vallidaton.This swfobject.js can be used for any html. -
Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete
SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENTHi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!!
Maybe you are looking for
-
I use iphone 3GS, after upgraded to ios5, my phone restart when i took picture with button and while playing music .. what happened?
-
Screen is dark even on the lightest setting.
Any suggestions
-
TCODE to check the edit authorization of objects ?
If suppose I am not able to edit any of the objects in BI7 and I need to check whether I have the authorization's to edit that particular object in BI7, where do I check it ? Is there any particular TCODE to check ?? And also I need to know whether d
-
Enabling Insert allowed for particualr records in a block,
Hi All, I have a requirement to enable insert allowed(and delete allowed) button for only particular records(say for all records where column1=2) and for all other values that insert allowed button should be disabled. I tried setting the property SET
-
My recent project came to a grinding halt with this message that keeps popping up as GB10 crashes. "Audio Engine was unable to process all required data in time -10011". After that, I get a long shopping list of data with the title, "Touch OSC Plug