Why does connmand add and delete route to 87.106.208.187?

Hi
Each time connmand starts the following is logged:
connmand[323]: eth0 {add} route 87.106.208.187 gw 192.168.0.1 scope 0 <UNIVERSE>
connmand[323]: eth0 {del} route 87.106.208.187 gw 192.168.0.1 scope 0 <UNIVERSE>
I can see that I'm not the only one wondering: https://01.org/jira/browse/CM-657
The source code does not seem to contain the IP adresse, nor does the IP exist in my /etc or /var/lib/connman/

Gusar wrote:Is 87.106.208.187 your DNS server? connman by default creates a local DNS server and creates appropriate routes so that it works. If you don't want that, start it with --nodnsproxy
No, I use dnsmasq on my router, so it's 192.168.0.1
Some more lines from my log to give some context:
connmand[313]: eth0 {update} flags 36867 <UP>
connmand[313]: eth0 {newlink} index 2 address 94:DE:80:78:E9:6A mtu 1500
connmand[313]: eth0 {newlink} index 2 operstate 2 <DOWN>
connmand[313]: eth0 {RX} 616 packets 232709 bytes
connmand[313]: eth0 {TX} 723 packets 133796 bytes
connmand[313]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
connmand[313]: eth0 {newlink} index 2 address 94:DE:80:78:E9:6A mtu 1500
connmand[313]: eth0 {newlink} index 2 operstate 6 <UP>
connmand[313]: eth0 {del} route 192.168.0.1 gw 0.0.0.0 scope 253 <LINK>
connmand[313]: eth0 {del} route 0.0.0.0 gw 192.168.0.1 scope 0 <UNIVERSE>
connmand[313]: eth0 {del} address 192.168.0.2/24 label eth0
connmand[313]: eth0 {del} route 192.168.0.0 gw 0.0.0.0 scope 253 <LINK>
connmand[313]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
connmand[313]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
connmand[313]: Skipping disconnect of carrier, network is connecting.
connmand[313]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
connmand[313]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
connmand[313]: eth0 {add} address 192.168.0.2/24 label eth0 family 2
connmand[313]: eth0 {add} route 192.168.0.0 gw 0.0.0.0 scope 253 <LINK>
connmand[313]: eth0 {add} route 192.168.0.1 gw 0.0.0.0 scope 253 <LINK>
connmand[313]: eth0 {add} route 0.0.0.0 gw 192.168.0.1 scope 0 <UNIVERSE>
connmand[313]: eth0 {add} route 87.106.208.187 gw 192.168.0.1 scope 0 <UNIVERSE>
connmand[313]: eth0 {del} route 87.106.208.187 gw 192.168.0.1 scope 0 <UNIVERSE>

Similar Messages

Why does fireworks add and extra quote on exporting html and images... looks like this ----- align=""left"

Hi Adobe Community,
I had this issue on previous versions of Fireworks.
Why is it happening? Is there a glitch in the software? I thought it would be fixed in the CC version..
here is a snippet of code that is exported.
<td><table style="display: inline-table;" align=""left" border="0" cellpadding="0" cellspacing="0" width="810">
Basically where ever there is a align="left" it is exported as align=""left"
This leaves me to do a find and replace to fix the code. Kind of annoying.
Personally I thought this would of been fixed in this version.
Please advise and how to fix this and prevent it from happening.
See screenshots below for my fireworks export settings.
Please help.

Anyone out there experience this?

Fitbit does not sync with healthvault no matter how many times I add and delete it

My healthvault never shows any information synced from fitbit.com, I have the scales and a tracker and no matter how many times I add and delete it through the fitbit share healthvault page but it never ever syncs over night. I have left is weeks and
still nothing in HV.
I am starting to wonder if HV supports fitbit? Any help would really be appreciated, this is driving me insane.
Do I need to create a new account? is my account just broken?

Hi,
I have spoken with FitBit about this issue and they provided the following:
Since you have already linked and unlinked your account and still having issues please contact Fitbit Support (http://help.fitbit.com/?cu=1)
for further assistance."
Addititionally when you contact FitBit can you please let them know that you have already contacted HealthVault.
Thanks
Tomas
MS HealthVault Support

Problem with Read-only user being able to add and delete files and folders.

The setup:
Computer #1
iMac (intel) running 10.5.5
File sharing ON
Sharing folder on external USB drive called 'iTunes' (but not the drive volume itself)
Users:
- Everyone = Read Only
- Admin(me) = Read/write
- UserA = Read Only (with account PW and username identical to local login for computer below)
Computer #2
UserA's iBook G4 running 10.4.11
When I go to finder>network>iMac>connect it prompts me to login which I do and then select 'iTunes' folder which is visible and mounts successfully. I can see all files, access them all. Life seems great. Then I discover that I can also modify and delete files from the iBook, and create and delete directories.
I'm new to networking and although I've setup and managed minimal networking tasks on PCs before, this is my first foray into the Mac networking world. Please help.
What am I doing wrong? What haven't I set?
Thanks in advance.

Sorry, I should have clarified this in the first email.
When I login from the iBook, I am logging in under a read-only user (not as myself, who is admin on the iMac). The user on the iBook has only been given read-only permissions on the iMac yet is able to add and delete files.
This read-only login/PW however, is the admin account on the iBook, but that shouldn't allow this person to write on the iMac so far as I understand things...right?

Why does the color and or tone of my image change?

Why does the color and or tone of my image change after working in LR for a couple of hours? I open LR and everything looks fine - work for a couple of hours on the same shoot - but then the pictures start to look flat or greenish cast as time goes by. All the files get flat and the greenish cast after a couple of hours - the ones already worked on and the newer ones I'm pulling up to work on. RAW files downloaded from a Canon 30D. Also exporting to PSCS2 as PROPhoto results in a flat image. I switched back to export AdobeRGB.

Hola - thanks for the reply - yep - closing and then opening LR helps - but can't do that all the time after processing 3 or 4 files.
One reply was a corrupt monitor color profile - So I deleted that one and loaded a new adobeRGB profile. That helped a little also for a while - I then reloaded my monitor drivers and refreshed them - that help for a day - the greenish cast is back It works fine on my laptop for now. The same pictures that look greenish in LR look great in Canon DPP. So it probably wasn't the color profile or monitor drivers. My issue started with the small scale previews so I bumped that up. Still have the issue. I finished up a project and now going to uninstall and reinstall LR. Let's see what happens with a fresh install. andy.

How to add and delete content on device from iTunes

I cannot find the way to add and delete content on my devices from the new iTunes. I don't understand why they changed the way it worked without any tutorials or hints at how to use the new iTunes app. I can see my device, I can see that music is on there, but I cannot unselect songs or content to get rid of it. Also, my apps do not show up on the apps list, I can see the screens with the apps on them and can delete them from that but the list is not working. I am using Yosemite and iTunes 12.01

If you select your device in iTunes then on the left-hand side of iTunes you should see a Settings heading with categories below it which you can use to select what to sync from your iTunes library to the device, and below that an On My Device heading with categories below it listing what is on the device.
For the Apps tab, the listbox of apps on my Mac's iTunes doesn't always populate until I've scrolled up/down the window. If yours doesn't populate then you have your apps downloaded and stored in your Mac's iTunes library - the listbox shows what you have in your computer iTunes library, if your library is empty then the listbox will remain empty.

Lately when I sync certain albums to my iPhone, the tracks are duplicated one behind the other so that I have to listen to each song twice. Why does this happen and how can it be fixed?

Lately when I sync certain albums to my iPhone, the tracks are duplicated one behind the other so that I have to listen to each song twice. Why does this happen and how can it be fixed?

Very strange behavior. Don't entirely give up on the "Manually Added Items" category ... I have seen things magically appear there even after I've checked and seen nothing there. I think things got real quirky when Apple released iCloud ... I don't remember extra copies of purchases lingering on my iPhone once transferred to my library before that. Sure, if I bought an album directly to my iPhone it would stay on there even after I sync to my library, but if I deleted the album from the iPhone it stayed deleted. Now it seems that there are some phantom copies that come and go with no explanation.
jcburbank wrote:
I've tried deleting the album from both the phone and from iTunes and then redownloading them to both and the same problem occurs.
If you're re-downloading an album to iTunes and your iPhone, that may perpetuate the problem. What happens if you completely delete every copy of the album, then just download to your iTunes library and then sync the album to your iPhone from your library? That should put only one copy on your iPhone.
A few other things to try:
1- Completely sign out of your Apple account on your iPhone, then re-sync to iTunes, then sign into your account on your iPhone again. Maybe throw in a Reset or at least a power OFF/ON somewhere in the middle.
2- Go to Settings/ General/ Usage, then select Music and when you see All Music, swipe your finger across it and tap the Delete button. Before doing anything else, Reset your iPhone. This does not actually delete your music, but seems to clear up some cobwebs left behind (people use this technique to reduce "Other" that swells up over time).

I have a iphone6 why does my daughter and my husband receive my text messages

i have a iPhone 6 why does my husband and daughter get my text messages

Do you share the same account and Apple ID and computer user account? If so:
Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library. Note that once done you cannot "share" apps under a single Apple ID. Each of you must purchase your own apps under your own Apple ID. When you decide to split up like this one of you will need to re-purchase the apps that they want to use.
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

I have downloaded Firefox 4.0 several times and after a short amount of time (days) it reverts back to 3.6.16. Why does it happen and how do I prevent it from happening again?

The Firefox 4.0 on my laptop reverts back to 3.6.16. This has happened several times. Why does this happen and/or how do I prevent it from happening again?

Thanks for the link. I just downgraded to the absolute shtfest that's 4.0. I WAS just fuming about how gawdawful this "new" version is, but after wasting so much time trying to sort thru all the issues caused by this 4.0 downgrade (past updates have always been seamless and troublefree - not so for this shtfest!) I'm flat-out RAGING!!! Fortunately the laptop still has 3.6.xx running - it's the LAST version of Firefox it will EVER see. I switched to Firefox so many years ago to get away from the insanity and frustration of Explorer - if this 4.0 crapshoot is the "future" of Firefox, then the incompetent nimrods responsible for it know where they can ram it. I'm starting the search for a new browser now - so long Firefox, it's been fantastic while it lasted, but you've gone and screwed the pooch, you've ruined a superb browser!
I'll attempt a reload of 3.6.xx on the desk machine, and if successful I'll run it till it drops, or I find a suitable replacement browser, but 4.0 won't be coming back - GOOD RIDDANCE!!!

How do I delete music from my iPhone and what is the best way to add and delete music?

How do I delete music from my iPhone and what is the best was to add and delete music to the iPhone?

See Here...
iPhone User Guide
and here
http://www.apple.com/support/iphone/syncing/

How do I add and delete pages to a pdf document?

How do I add and delete pages to a pdf document?

Hi Paul,
Adobe Acrobat has the features to add/delete/extract/crop/insert pages to your PDF files and are much more features.
Adobe Reader has a very limited features for editing to PDF files.
Now you can subscribe to Acrobat Plus and see more information at https://www.acrobat.com/acrobatplus/en/home.html
Or you can download Acrobat XI Pro for trial version from www.adobe.com.
thank you.
Hisami

What is the colored spinning disk, and why does it appear, and how do I get rid of it?

What is the colored spinning disk, and why does it appear, and how do I get rid of it?

Repairing permissions will help as will running the UNIX commands. This widget will do all but the pram.
http://db.tt/Lob4XtPB Maintenance Widget One of those links will get you the widget.
To reset the pram hold the Command+Option+P+R when starting up, wait through 4 startup sounds before letting go.

Add and Delete a row in table

Hi Expert,
In SAP interactive form OFFLINE Scneario.
I have a deep structure. In which i am using other structures like kna1, knb1, knvv.
Now in KNVV is again a deep structure in which i have a table type.
Now a draged and droped this table type to my layout so i got a table.
I Need to have two buttons ADD and Delete, To add and delete a row in table repectvily.
I saw other threads also but get not do it.
My table type attribute's name in KNVV structure is VLACT.
I write following code on click action of ADD button
data.#subform[0].Button1::click: - (FormCalc, client) -
VLACT.row.instanceManager.addInstance(1);
xfa.form.recalculate(1);
but it shows error msg
accessor "VLACT.row.instanceManager.addInstance(1);"
is unknown.
Also i am not able to see tabel itself wich i draged and droped. Only two buttons are there.
Plz help
Thanks ? Regards,
Arvind

Hi Otto,
This is the code i am using to add new row.
Also all the settings in form are correct like "Repeat row for each data item" etc.
I want to have at most 7 rows.
var nTableLength = Table1.nodes.length;
var nNumRow = 0;
    for (var nCount = 0; nCount < nTableLength; nCount ++)
      if ((Table1.nodes.item(nCount).className == "subform") & (Table1.nodes.item(nCount).name !== "HeaderRow"))
       { nNumRow = nNumRow + 1; }
           if (nNumRow == 7)
           { xfa.host.messageBox("The maximum allowable number of rows is 7. You cannot add any more rows.", "Warning", 3); }
       else {
              Table1.Row1.instanceManager.addInstance(1);
              xfa.form.recalculate(1);
               xfa.host.messageBox("row added" );
I get the msg form the statment        xfa.host.messageBox("row added" );
But i can not see the newly added row
Plz help
Thansks & Regards,
Arvind

How do i add and delete photos from the screensaver preference window

How do i add and delete photos from the screensaver preference window?

Hello, sassy4sue.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful when creating or editing iPhoto albums that you are using as a screen saver.
Mac Basics: Using Screen Saver when your screen is idle
http://support.apple.com/kb/ht2485
Cheers,
Jason H.

Why does my 4g and 3gs i phone get my message when its not group message?

why does my 4g and 3gs i phone get my messages,same household but not group message same apple itune account thou.

On each device check the following in the Settings app.
Settings > Messages > Send and Receive
Make sure the proper phone numbers and/or email address is selected on each. Deselect those that you don't want to use an a particular device.

Why does connmand add and delete route to 87.106.208.187?

Similar Messages

Maybe you are looking for