Why does CUBE EFFECT only work with 1 photo?

If I want the cube effect with a slideshow I only get the effect 1 time? I've tried all different ways - no go... anyone know the answer to this? I want a group of photos to rotate everytime they change.

Sal - I know how it's supposed to work Dude but it doesn't! It works on the first one and the rest just change but NO CUBE. I've been using Macs for years - I know a lot but this one is puzzling? Have you tried it? Does it work for you? I may need to find the preferences file and trash it 'eh? where's it at?

Similar Messages

  • Why does my mic only work with some apps?

    My mic suddenly stopped working in some apps. I can use it just fine with FaceTime and Skype. It does not work when I use my Phone, Siri, Safari, and Voice Memos. I did a full restore and have the latest version of iOS.
    Please help!

    Sorry for bumping, but last night when I posted the site kept going down and acting wacky. :)

  • Why does Antenna reception only work with cover off?

    Like so many others I did the memory upgrade to 2Gb on my core duo and lost the antenna connection. It snapped back on to the main connector near the rear, and now everything's working as expected. However, when I put the cover back on the wireless reception fades away... Any suggestions?

    I suspect that's a factor related directly to the casing in effect working as a shield against the signal. Very unhelpful, but not entirely untypical of the experience of Airport signal with Mac minis.
    If the lower signal is more noticeable than it was, it suggests the antenna is not firmly connected, or hasn't been positioned quite right. I'd take the top back off, disconnect the antenna again, check the card is firm and then reconnect after ensuring the connector is clean.

  • Why does my sound only work with my head phones?

    I recently discovered that my iPhone 4s has not been functioning the way it should be. My sound and speaker are not working. I can't even adjust my volume unless I have my headphones. I can't hear my incoming calls and they can't hear me. This happens every so often and its been happening for the past two days. Is there anyway of fixing it? My phone is no longer under Apple's warranty. Please help.

    Try inserting and re-inserting your headphones 7 or 8 times. Also try cleaning out the headphone jack in case of debris that might be interfering with the connection/disconnection.

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • Why does flash player not work with facebook?

    Why does flash player not work with fcebook?  Whenever I wish to view a video, I get the message that i need to upgrade my flash player. Then no matter how often I download and install flash player I still get the message that I need to upgrade my flash player.  When I go check which version I have, I always get the message that I have the most current one.  I run Mozilla Firefox with Windows.  I don't know anything else.
    Message was edited by: khettich

    This means you don't have the latest version installed.  Update to 11.9.900.117, and Firefox will allow it: Flash Player Plug-in (All other browsers)

  • Why does Java Application not working with Macromedia Flash 5 or MX?

    Why does Java Application not working with Macromedia Flash 5 or MX?

    Who says they don't?
    Although I don't know much about those I'd think they should be able to talk to Java Aps using Sockets or request Servlets ...
    Spieler

  • Why does my ipad air work with my netgear routerWGT624

    why does my ipad air work with my netgear routerWGT 624

    Why wouldn't it work with that router?
    Or are you really asking why doesn't it work with that router? If that's your question try rebooting the router by powering it off for thirty seconds then turning it back on.
    If this doesn't help please explain in more detail what happens when your iPad attempt to connect to your Wi-Fi network.

  • Why is my airportxpr only working with Itunes and not with another music program

    why is my airportxpr only working with Itunes and not with another music program??
    I can not select/see other outputs in my sound selector.

    You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
    for Windows - http://rogueamoeba.com/airfoil/windows/
    for Mac - http://rogueamoeba.com/airfoil/mac/

  • Does ipod touch only work with wi-fi? Can I download games through home mac?

    Does ipod touch only work with wi-fi? Can I download games through home mac?

    iPod touch is Wi-Fi only, yes. I'm not sure exactly what you mean by games from home Mac, but you can purchase game apps in iTunes and sync them to your iPod.
    Merry Christmas.

  • Does T400 can only work with up to 4GB RAM?

    Does T400 can only work with up to 4GB RAM?
    Here (http://support.lenovo.com/en_NO/product-and-parts/detail.page?DocID=PD005598), it says 512 MB, 1 GB, 2GB, or 4GB memory.
    So if more than 4GB RAM, will it do harm to the hardware of T400? Or just only 4GB will be used, and no any harm?

    That doc was probably written when there were not 4GB DIMMs available, or at least being commonly used. T400 will work with any combination of 1GB, 2GB and 4GB DIMMs, up to 8GB total. I tried single 8GB DIMM and it didn't work

  • Does airplay mirror only work with the ipad2 and not ipad1

    does airplay mirror only work with the ipad2 and not ipad1

    But can it still stream video wirelessly?
    For example, with the Digital AV Adapter I can watch video on my TV, but obviously it's wired.
    I'd like a wireless option.

  • I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

    Hello Hornet12,
    Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
    Using AirPlay
    http://support.apple.com/kb/HT4437
    AirPlay requirements and capabilities
    To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
    Stream content from
    Requirement
    Notes
    iPad
    iOS 4.3 or later.1
    From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
    With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
    iPhone (3GS or later)
    iPod touch
    (2nd generation or later)
    Computer
    iTunes 10.2 or later.
    Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
    Apple TV
    Apple TV software version 5.1 or later.
    Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
    Cheers,
    Allen

  • Does ws adapter only work with asynchronous web service?

    Hi all,
    can you please confirm whether or not ws adapter (PI 7.1) only works with asynchronous web service?
    I have created an async. outbound service interface in PI 7.1, generated the client proxy in ECC, created an web service based on the proxy, wrote a test program to call the web service (PI scenario uses ws adapter in the sender CC). Everything works fine.
    Then I did the same thing with sync. outbound service interface. I got exception while calling the web service in ECC.
    I've heard that ws adapter is designed for async. communication. Does it mean that it won't work with sync. web service?
    I haven't seen any official SAP document saying taht ws adapter only works for async. web service. If you have any, can you please share it?
    Thanks
    Jayson

    Thank you all for your information.
    The error I got when calling the proxy with logical port (web service) is:
    SOAP:1,007 SRT: Unsupported xstream found: ("HTTP Code 404  : Not Found") 
    I will debug it to see what exactly happens. And will keep you guys updated.
    Just debugged, the error is because the http header's content type is text/html while it should be test/xml. However this type is set by the ws runtime, not by the application. Anybody has an idea about this?
    Jayson
    Edited by: Jayson on Feb 18, 2009 10:04 AM
    Edited by: Jayson on Feb 18, 2009 12:11 PM

  • Does Mighty Mouse only work with desktop Macs??

    I just bought an Apple Wireless Mighty Mouse, assuming it'd work with my new Leopard OS X Macbook. I followed the instructions on the Mighty Mouse booklet...but no installation start-up window ever appeared. I'm a beginner with Apple, so I figure I've done something wrong....does the Mighty Mouse only work with desktop Macs and not MacBooks?
    Please help if you can.

    Ah! sorry, my mistake! "wireless" was the key word. And yes, prior to my new mighty mouse, I also used the wireless one. And you need to do the following:
    1) Turn bluetooth ON (either from finder icon (you can have it placed on your finder bar by tick box in sytem preferences/bluetooth.
    2) Then, you need to "pair" your mouse via bluetooth setup assistant.
    3) once "paired" off you go.

Maybe you are looking for

  • Error in Closing a Project .

    Hi Guru's I am facing a situation where the system is throwing an error msg when attempting to close a project. We have checked the AUC and noted that no value exist there. However the GL account (assigned to AUC) shows a balance in local currency 2.

  • Soa-infra fails to startup in a clustered install

    Hi, my soa-infra failed to deploy after starting the soa managed server. It's a cluster install 2 node. Here is the error. Can someone please tell me what's the issue       Truncated. see log file for complete stacktrace Caused By: org.springframewor

  • HP LP3065 - problems selecting input

    Dear people, Quite some time ago I purchased the LP3065 monitor, it has always worked perfectly well. Until recently II had only one PV with DVI output. No matter which of the inputs on the monitor I connected the cable to, it worked perfectly well.

  • Gradient interlocking circular arrows in Illustrator

    hi there- I was wondering how you make interlocking circular arrows similar to this in Illustrator: I can do the circular arrows one of two ways: create a circular outline, split into 3, put arrow heads on, make them a fill and add gradient OR create

  • Stay at the input screen after prompting message at the status bar

    I have some validation on the input values have been performed before executing the program. For invalid input value, I prompt an error message using "MESSAGE 'XXXX' TYPE 'E'.". The message is shown successfully at the bottom, but it goes to an empty