Why does data/3g work on my O2 sim but not with Three sim (iphone 5)?

as the title says...
i have been using an O2 sim for a while in my iphone 5 without problems. today i tried a sim from the three network. calls and texts work fine, but i can not get any data connection to work.
i have been on the phone to three and tried many different settings/network resets etc.
when i put the sim in the phone updated automatically - i was directed to go to "settings>about", where it asked me to update. i clicked yes. after a long phone call with three, they say all my settings are correct.
i have tried the same sim in an iphone 4 and the data works fine with it, so there's definitely something a miss with the actual iphone 5 handset.
i am running ios 7.0.4
(in setting > about)
carrier: Three 15.6
Model: ND662B/A
Modem firmware 5.02.00
any ideas?
thanks

Hi. :)
Thanks for the reply.
When I insert the three SIM card there is no option for apn. From what I've read, three do not allow it. The apn settings show up fine with my O2 sim.
I have noticed something strange when playing about with the data. If I open tunein radio app with wifi and steam a live broadcast, if I switch on data and then switch off wifi, the stream still plays. Then when I look at my data usage it shows data has been used. If I try and use data at the start of the app, it will not connect and I still can't get the data to work on anything else. So some slight element of the data connection is getting through.

Similar Messages

Why does my itunes work in the guest account but not my administrator account?

I have tried to reset, retry, restart, reinstall and restore itunes on my pc to figure out why it won't work on my administrator account yet it's fine if I sign into my guest account. It worked fine one day and the next, just didn't work. I have Windows 8.1. Any ideas?
Thank you,
Simone

Make sure that mouse keys aren't on. System Preferences > Universal Access > Mouse and Trackpad
System Preferences > Language and Text > Make sure that U.S. is selected. If there are multiple languages selected there will be a flag in the menu bar and make sure that that is set to U.S..

Why does a page work when i open it but not stream it?

I have a web server, it downloads the following code off my hard drive and it works, but if i stream it in off a server i have written, it does not, yet the source codes look exactly the same. Help? (open and close tags have been put all as open and between " signs.
"<"ASX VERSION="3.0""<"
"<"title>Built to Last"<"/title"<"
"<"ENTRY"<"
"<"REF HREF="http://www.conservatives.com/video/builttolast_intro.wmv" /"<"
"<"ENTRY"<"
"<"ENTRY"<"
"<"REF HREF="http://www.conservatives.com/UploadedFiles/VIDEO/OTHER/builttolast0306.wmv" /"<"
"<"ENTRY"<"
"<"ASX"<"

please not Javascript works, it's just the uploaading of files, but shouldn't the browser do this itself?

Why does malloc operation fails on solaris 9 x86 but not on solaris 10 x86

Hi:
- We are building an application written in C
on x86 Solaris 9, x86 Solaris 10, and sparc Solaris 9.
- During testing, we noticed that
when the application is built on x86 Solaris 9, it dies silently;
when the application is built on x86 Solaris 10, it runs perfectly fine;
when the application is built on sparc Solaris 9, it runs perfectly fine;
when the application is built on cygwin, it runs perfectly fine.
- The statement which causes the application to die silently is:
/* Allocate space for procedure arguments. */
if (( myArgv = (char **) malloc(( argc+1) * sizeof(char *))) == NULL)
- My question is: how should I change our x86 Solaris 9 nightly build
to build the application properly ?
- Our build systems are:
sparc Solaris 9
===========
SunOS host1 5.9 Generic_112233-11 sun4u sparc SUNW,Ultra-5_10
Solaris 9 12/02 s9s_u2wos_10 SPARC
Copyright 2002 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 05 November 2002
x86 Solaris 9
==========
SunOS host2 5.9 Generic_118559-11 i86pc i386 i86pc
Solaris 9 12/03 s9x_u5wos_08b x86
Copyright 2003 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 21 November 2003
x86 Solaris 10
==========
SunOS host3 5.10 Generic_120012-14 i86pc i386 i86pc
Solaris 10 8/07 s10x_u4wos_12b X86
Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 August 2007
Thanks
JL

You should never pass something to free that wasnt received from malloc.
Although as a special case, free of the null pointer is allowed.
Thats all clearly written on the malloc man page..
So if your program is free'ing non malloc'ed pointers, then thats a bug in your program.
So based on your code sample above
free(ds_namv[j]) would be illegal.
But free(data[j]) should be OK, since thats a null pointer.
However, it should be perfectly fine to assign a new malloc'ed value to an existing pointer whether or not it was originally initialised using malloc.
When you assign it, the original value is irrelevant.
Additionally, the code fragment ds_namv[j] = (char**)"\0"; demonstrates some further conceptual problems.
"\0" isnt of type (char **). It's of type (char*). And its a pointer to constant space. So writing to the area pointed to, would be illegal.
As to why it works on sparc but not x86.
The code appears to have a number of errors, and you just got lucky that it ever worked on sparc...

Why does my computer say that its plugged in but not charging yet the battery is not reducing

it says plugged in, not charging, 99% (battery life)
but the battery life is not reducing & hasnt for 2 days. it just stays like that.
hp pavillion dv5-2132dx laptop
windows 7 64 bit
i have had a few weird occurences and im not sure what caused it. abruptly my speakers would stop working & my battery life would start reducing. that happened i think 3 times over the course of several months. this last time which was the 3rd is when i changed electrical outlets thinking that maybe that was the problem. and the power & speakers immediately went back to normal. its only been a few days since i changed outlets & everything is working as it should be however as mentioned the battery icon on the taskbar says that its plugged in but not charging & it remains at 99% for the last 2 days.

Hi,
First of all, shut down the notebook, unplug the AC Adapter, remove the battery, and then hold down the Power button for 30 seconds.
Now, plug in the AC Adapter without the battery inserted, start the notebook, open windows Control Panel, open Device Manager, expand the entry for Batteries, right click on and the Microsoft ACPI Compliant Control Method Battery and select Uninstall - do not uninstall anything else here. When the uninstall is complete, shut the notebook down, unplug the AC Adapter, re-insert the battery and then start the notebook on just the battery. Windows will automatically reinstall the driver - leave Windows running for a few minutes. Shut down the notebook again. Now plug in the AC Adapter ( with the battery still inserted ) and start the notebook to see if this has helped the charging issue at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why does lightroom read my images on my laptop but not on my desktop from an external hard drive?

I use an external hard drive for my Lightroom images. When I travel I take that external (plus a second identical one for back-up) with me and use my laptop. When I return home, I use that external to view and edit my images on my desktop. Suddenly about 350 images show up as missing or offline when I view that external drive on my desktop. When I return it to my laptop, everything is fine. Nothing is seen as offline or missing. What can have happened? I use the same external, the same catalog and do not understand why the images are seen only on one computer and not the other. I am an Apple user but can't see what difference that would make. This is the first time I have had this problem. Help would be appreciated.

Thanks for your thoughts. I have compounded my problem now by upgrading my desktop's operating system. (I had upgraded my laptop and thought that that might be a problem...two different operating systems) Now my desktop cannot open Lightroom 4.2 for some reason. I have an appointment with the Apple people tomorrow so I will see what comes next. Right now it is from the frying pan into the fire for me.
Check "New Images" Gallery at:
http://Noffi.smugmug.com

Why does a particular iCal calendar appear on Mac but not iPad?

I use several calendars within the iCal application ( personal, business, etc.)
All of those calendars sync between my Mac and iPad just fine, except one,... it's a football schedule i named 'Buckeye.'
All my calendars, including Buckeye, appear in the drop down menu on both my Mac as well as my iPad. Why won't this Buckeye calendar appear on my iPad?
Caveat:
This Buckeye calendar happens to be a 'subscription' calendar. The others are all 'normall calendars which I key in manually.

Thanks for your help... here's the link:
http://edtech.boisestate.edu/dbeck/Page%201.htm

Why can some websites work well in other browsers but not in Firefox 3.6?

Today I went to Turbo Tax.com to file my taxes, but for some reason Firefox 3.6 would not let me get past logging in and their homepage. At first I thought it was the website, so I contacted their support who couldn't figure out the problem, so I opened Chrome to see if it would work on it. Guess what I did my taxes without a hitch. On Gamefly.com Firefox won't let me move a selected game to the number one position, but it will on Netflix.com. Firefox is my default browser and I would like to keep it as such but I can't with this kind of iffy proformance. Help! By the way I am running Windows 7 64-bit on a Dell desktop pc. Comodo is my firewall, Microsoft Security Essentials is my anti-virus. FYI

Although that error references the problem line in the script as line 71, that line actually has numerous commands in a compressed form that is very hard to read, so I can't see immediately what the issue might be.
In case one of your extensions is involved, have you tested the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
Not all add-ons are disabled: Flash and other plugins still run
After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
Any difference?

Why does embeded .swf file goes crazy in IE but not in other browsers?

hi everyone
I'm building a SharePoint page with an embedded .swf file that is capable of detecting the current URL to activate and show content. Everything goes smoothly in all the browsers I've tested it except IE. When I open the SharePoint page in IE the .swf just reproduces the frames non stop, It completely ignores my scripts and I cant find anything that could be responsible of this. besides the url detection script, i just have simple button configuration for the timeline and general stops.
any idea?.....anyone?

Normally when swf's play differently for different browsers it is due to the embedding code used in the html page.

Why does my site appear "messed" up in CS6, but not in CS5?

I am on default preferences on both programs, and within cs5 my site appears just fine in design/split mode, but in cs6 it appears messed up. Here are two screenshots:
CS5:
CS6:

As per your previous identical post: http://forums.adobe.com/message/4508394

Why does my program run fine in highlight execution, but not normally?

When I highlight execution, the program runs fine, but when I run the program normally, nothing happens. (I believe the program is stuck at the initialize cam vi). If someone could help me out, I'd be very thankful
Attachments:
intensity10.vi ‏139 KB

The first troubleshooting technique I did was to add several "waits" throughout the program, particularily with the loops. I learned the problem was actually with the hardware itself and the camera mode. The camera must take an empty frame before it can store the image, thus the for loop needed to be replaced with a while loop.
However, after fixing the program using boolean logic, 2 of the buttons disappear on my front panel during use (which I will have to further troubleshoot). Thank you!
Attachments:
intensity11.vi ‏158 KB

Xfdf and pdf works in Adobe Reader 6, but not with new versions 7, 8, X

I have a xfdf file which is created by querying a SQL data base and contains data for a pdf form; it works with Adobe Reader 6, but does not work with new versions of Adobe Readers (7, 8, 9 and X).
It is an intranet site running IIS 6.0 in Windows Server 2003 Web Edition SP2 with Adobe 6 installed and client systems include XPSP2, XPSP3, Vista, Windows 7 with different versions of IE, Firefox.
With new versions of Adobe Reader, click on the hyperlink launched the pdf form in a browser window without data; below is the link:
        // create shipping slip hyperlink
        string strLtrSlipUrl = "~/Archive/LtrShipSlip.pdf#FDF=" + lblWO.Text + "LtrShipSlip" + ".xfdf";
        HyperLink hlLtrShipPdf = new HyperLink();
        hlLtrShipPdf.Text = "Ltr Shipping Slip";
        hlLtrShipPdf.NavigateUrl = strLtrSlipUrl;
        hlLtrShipPdf.Target = "_blank";
        pnlLtrShipSlip.Controls.Add(hlLtrShipPdf);
I have installed new versions of Adobe Reader in the Web server (to match what the clients are using), but results are the same – blank pdf.
I uninstalled the new versions and installed version 6 and the pdf and xfdf worked happily together, but we need new versions of Adobe Reader in the client computers.
Thanks for helps and suggestions – I have read articles about using iTextSharp to create pdf documents from .NET apps, but that would be my last choice.

Adobe Reader 9 can't save the old FDA forms. FDA must update their forms.

Why does't Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?

I had problems last year when Flashplayer stopped working suddenly. After months of seeking help, I received instructions that fixed the problem...until the other day. A pop-up box from Adobe appeared indicating an update was available. I agreed to installing the update and the Flashplayer has not worked since. I referred to my notes from the "fix" last year and made one adjustment in the Active-X settings, but this did not help. Flashplayer still does not work. Help! I just don't think I can go through this for several months again.

Hi,
I am going to try reorganizing my reply first and
just forwarding to you before I try to recover a
message. I think the problem may be that I
provided answers within your text instead of
separately. Your system may not like the format
I tried. So here goes.... I have pulled my
answers out of your message and they appear in
the order of your inquiries below.
“Check the Windows system tray carefully to make
certain no applications are still in memory which
might possibly use Flash Player.” –a statement
from the Adobe Un-install link article. I don't
know what “in memory” means. The only things I
have that may use Flashplayer that I know of is
the Weather Bug. Windows Mediaplayer is also
listed in my programs, but I have never used it.
Also, there is no mention of Norton here, but
Norton Internet Security ’09 is what I have installed.
1. No Firefox. MSN Exlorer is listed among my
Programs, but I have never used it. It was
likely installed by Dell when I purchased the computer.
2. Norton Internet Security '09. Bell Internet
Security - Alert is listed in my programs (with
options, including uninstall) but this is the first time I have noticed it.
3. Norton Internet Security has a firewall with
it that I understand is way better than Windows.
4. There is a Google toolbar, Norton toolbar and
a bunch of stuff listed in the Manage Add-ons
like Skype, Adobe and Sun Java Console which I think are add-ons.
Java Webstart is listed under Accessories in
Programs. In Programs is Adobe Distiller 6.0,
Adobe Acrobat 6.0 Standard, Adobe (which is
empty), Adobe.com and Adobe Reader 9. I did not find DLM or GetPlus.
I found no listing for Shockwave Flash
Object. You did not ask this and I don't mean to
get ahead of you but in case there is relevance,
I looked in Internet Options, Security, Custom
and saw a number of reference to Active X and
plug-ins, some of which are disabled; others enabled.
From reading in your posts to mlmarg, I saw the
instructions for finding the Flash folder and
used them. I used Explorer to access My
Computer,, C Drive, Folder 1386, Folder System
32. There are 2 items in it from 2002 but not
what I think you want. The 2 are SMSS.EXE and
NTDLL.DLL. If this is not correct, I will need your instructions to locate it.
I will ask because I don't always understand
what you are asking of me. Thanks.
>Date: Thu, 21 Jan 2010 14:23:36 -0500
>To: [email protected]
>Subject: Re: Flash Player Why does't
>Flashplayer work after I agreed to an update from an Adobe pop-up box prompt?
>
>Hi,
>My comments are within your text below. Let me
>know what I missed or misunderstood.

Why does GarageBand audio work for guest user but not my account?

Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband .

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Why does data/3g work on my O2 sim but not with Three sim (iphone 5)?

Similar Messages

Maybe you are looking for