Why does disc show as filled with only one small file added?

I'm also new to Apple.  I've a MacBook Pro - Snow Leopard 10.6.8.  I've checked the documentation and help information and followed the instructios.  The blank CD-R  shows as (CD-R;  BLANK - Yes; ERASEABLE - Yes; OVERWRITABLE - Yes; APPENDABLE- yes).  I wrote one small file to the CD using the Burn Folder.  The file was on the CD, but all available space was used with zero remaining.   The disc is not erasable.  One response to an earlier question to look for multisesson recorder and select leave disc appendable or look for a triangle in top right.  Could not find this.  I'm sure this is another area where I'm just looking in the wrong place for instruction.  Any help is appreciated.

See these instructions:
https://discussions.apple.com/thread/1515120
Note, you will likely have to start with a new blank CD.  Once burnt without appendability selected, it often can't be appended in the future.

Similar Messages

  • Why does my imessage not work with only 1 phone number

    Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

    Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

  • Why does screen show battery icon with red ring?

    Why does screen show battery icon with red ring?

    What does it give as a percent charge"  The red band usually means the battery charge level is getting critically low and it needs to be recharged.

  • HT4075 when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

    when i drag the pdf file over other (in previewer) to merge it does not show green circle with plus one. what to do?

    Hello djensen1x,
    Could you please let me know what version of Acrobat are you using.
    Also, tell me your workflow of combining those PDF files?
    Please share the screenshot of the error message that you get.
    Hope to get your response.
    Regards,
    Anubha

  • Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Hello Jesslb23,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Best of luck,
    Mario

  • Why does my imported video appear on only one clip?

    I had only made a  few in the past but I remember well that the footages appeared as several clips on the pane window.On this occasion I have but only one clip, despite the fact i wasnt running the camera constantly and took several bits of film footage.Rather confused by it

    Actually i just finished importing in and it has appeared as two clips which still isnt much good as it limits my editing options somewhat.There area few bits i would like to remove , then add trans and effects as well

  • Why does slide show play photos with jagged or distorted images?

    This is weird. When I start a slide show, the photos immediately become distorted as they go from one transition to another. It's almost like the entire photo frame becomes "shattered" in several large pieces. Sometimes, when hitting the pause button, part of the photo is fine while the other part has lines all the way through it, obscurring that part of the photo. When playing music, there is no alteration in quality of the music; everything is normal.
    What's going on here?
    G4 Dual 450   Mac OS X (10.3.9)  

    Hi j4net,
    Have you tried a different transition? It could be your 450 computer is not up to speed. (just a guess)

  • Why does FMP show my husband's location one day and not the next?

    At my wits end!
    No idea why this happens & we are on same iCloud acct & it's on

    Hi Roger,
    Welcome to the Apple Dicsussion Pages.
    The Alcatel Speedtouch 585 proabably has version 5 firmware on there. I see form your post you know what the problem is.
    This can be the problem.
    Earlier modes in the 500 series had Firmware versions 3 and 4 which meant you could telnet into them form the Terminal Application and Unbind SIP from port 5060.
    This is what is causing the problem.
    The symptoms are a starnge pattern of succss and failure.
    A small group you can contact all the time
    An equally small group of now and then success
    And a large group of Buddies that you can never get AV chats with.
    ibosie who posts here says he has been in caontact with Alcatel and that they are working on a Firmware update to get round this.
    At this stage another modem would be the way to go. (the 510 and the 580 can be Unbound)
    Ralph

  • Why does my I-Phone 4 calendar only show apptmnts from the last 90 days?  How can I see appointments prior to then?

    Why does my I-Phone 4 calendar only show apptmnts from the last 90 days?  How can I see appointments from prior to then?

    The Sync setting only appears if you are syncing your calendar with iCloud.  If you are syncing them to another service (such as Google) you would need to go your account with that service and see if you can change the setting there.
    If you are syncing your calendar with iCloud, you should see the Sync setting, and be able to tap and change it.

  • Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

    Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

    If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

  • I have an iPod touch 4th gen. why does it show the wrong album art only on my ipod and not on itunes? Is there any way I can fix it?

    I have an ipod touch 4th gen. why does it show the wrong album artwork on my ipod and it's fine on itunes. why is that and is there any way to fix it? please help!

    I think it can't find the right or any artwork and ends up putting junk in there.
    And can happen with artist and other tags.
    probably fine with commercial media but otherwise....? I think you have to manaully go in and edit
    I also don't like how it handles and stores non-Apple iTunes store content.

  • HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

    HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/  Thanks

    Sorry but I don't know anything about this.  But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

  • How to make 1D Array but with only one element filled in Real Time

    Hi folks,
    here I am with another question. I want to implement an prediction discrete state space observer which is going to run on a CRIO real time target. I am going to do it just like in the example which comes with LV.
    I have some questions regarding the input and outputs which in the example those are "dummy".
    My model is a SISO model, but the function "Construct SS model" returns parameters (A,B,C,D Matrices) as 2D arrays, so once you connect the cluster model into the Discrete Observer model, it takes y and u as 1D arrays despite of the fact that there is a SISO model.
    I realized that the function I am using in the simulations, uses 1D arrays but with only one element filled:
    Does anyone knows how to implement such 1D arrays in Real Time? I guess the way to do it is preallocating one array of zeros of size 1, and then recirculating it through some SR, and replacing the element with my real input and output, but at the dummy.vi, they are using a simple "build array"
    function.

    Ok, I did it that way. But I am facing another problem right now...
    At some point the Discrete Observer return a NAN array, you will see the code in the code snippet?
    I get rid of that component by component, but the observer gets "stuck" in it. So my Control law is zero... but the state stimate is NAN.
    Also I am attaching the VI.
    I do not know why, since in the simulation program all runs well. any thoughts? Maybe the internal numeric precision of the State Space Model?
    Attachments:
    RT - Pole Placement + Complete Observer.vi ‏40 KB

  • Issue with only one client - The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed.

    Below issue is with only one client in that untrusted domain. So boundary is not the issue.
    Env -
    mydom.com has SCCM PRI site (MP, DP as well).
    Client is in untrusted forest.
    Please help.
    Thanks
    MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteCode:         pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    SiteVersion:      5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message body '<ContentLocationRequest SchemaVersion="1.00">
      <AssignedSite SiteCode="pri"/>
      <ClientPackage/>
      <ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
    UseInternetDP="0">
        <ADSite Name="Default-First-Site-Name"/>
        <Forest Name="staging.local"/>
        <Domain Name="staging.local"/>
        <IPAddresses>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
    <IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
        </IPAddresses>
      </ClientLocationInfo>
    </ContentLocationRequest>
    ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
    Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Received header '<Msg SchemaVersion="1.1">
     <ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
     <SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
     <SourceHost>pri1SCCM02</SourceHost>
     <TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
     <ReplyTo>MP_LocationManager</ReplyTo>
     <CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
     <Priority>3</Priority>
     <Timeout>600</Timeout>
     <TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
    Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
    Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
    PM 4816 (0x12D0)
    Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
    SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
    Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
    Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
    Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
    MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
    ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
    Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
    Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
    Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000.  The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    A Fallback Status Point has not been specified.  Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
    CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)

    Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
    That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
    This line jumps out at me in the log file though: "An MP exists on this machine".
    That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

    I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
    A.) Multiple clipping paths around it
    B.) Most text has now become outlined. Not editable anymore.
    C.) Gradient areas have multiple clipping paths of the single gradient area
    D.) The gradient areas now become rasterized.
    This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
    Please help.
    Thank you very much

    John,
    I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
    But still a bit confused as to why the new save places clipping paths around the document.
    Thank you John and Monika for your help.
    why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
    created by John Mensinger in Illustrator - View the full discussion
    I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
    but i seem to be lost.
    It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
    Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
    That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Maybe you are looking for