Why does double-click when trace on causes FRM-92101
Hi:
We have approximately 10 users for which we turned trace on. For some reason, when this user community double-clicks on a forms open space (i.e. on a non-item's canvas pixel), the sessions crashes and gives the following error:
FRM-92101: There was a failure in the Forms Server....
When you click the Details button you see the Java stack associated as follows:
Java Exception:
oracle.forms.net.ConnectionException: Forms session <115> aborted: unable to communicate with runtime process.
at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
Can somebody shine some light on this?
Is it the forms code?
Is it the back end?
Is it a connection to a website where we are trying to get something from?
Thanks,
Thomas
OK - I found the culprit. It seems that the Answers.com '''1-Click Answers''' utility had changed its behavior. In its Options on the Activation tab is an option to activate it when using double-click in a browser. I don't remember turning it on, but it ''was'' on. When I turned that option off, the problem went away. Apparently it is not compatible with FF8, since double-click was apparently intercepted, but 1-Click Answers was not activated - the double-click simply became a no-op.
Now that I've turned off that option, double-click in FF8 is back to the way it's supposed to work for quickly selecting a whole word or sentence.
If anyone else encounters this problem, I hope this information will help to resolve it.
Similar Messages
-
Click wheel, why does it click when its off??
Ok, so i have an ipod fifth generation (a.k.a. video ipod). When i hold the play/pause button down to turn it off, it turns off fine. But then i spin my finger on the click wheel, and it's still clicking, although its off! Why does it do this?? Is it normal??
Hi @bobby01,
Welcome to the HP Forums!
I'd suggest first, checking that the printer is still connected to your network. To do that, please try Printing a Network Configuration Page. That page will indicate if the printer is still connected to your network or not.
If the printer is connected, please try this 'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print document.
If the printer is not connected reconnect it following the steps in this Setting Up the Printer for a Wireless network for the HP Photosmart Wireless e-All-in-One Printer Se... document.
Let me know how things go for you
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
Why does double-click no longer select a whole word?
I am on the beta update channel and currently using FF 8.0, latest update as of the moment of this posting.
I am not sure when it happened - I think since I started using 8.0 - but double-click no longer selects a whole word. It's the same effect as a single click - simply positions the insertion point where the mouse cursor is located.
This is very aggravating. I thought it may be a bug in the new version (I already posted it to Bugzilla, but hasn't been confirmed yet), Unfortunately, I don't have the old version to cross-check (can I install both versions on one machine?)
Or is it some configuration issue? Or conflict with something else? I've searched and not (yet) found any other complaints about this issue from other users.
Note that I do not have the problem in any other app nor in other browsers that I have installed (e.g., IE, Chrome, Opera, Safari). In all of those, double-click on a word selects the whole word.
Thanks in advance for any suggestions or guidance.
Best,
YoshOK - I found the culprit. It seems that the Answers.com '''1-Click Answers''' utility had changed its behavior. In its Options on the Activation tab is an option to activate it when using double-click in a browser. I don't remember turning it on, but it ''was'' on. When I turned that option off, the problem went away. Apparently it is not compatible with FF8, since double-click was apparently intercepted, but 1-Click Answers was not activated - the double-click simply became a no-op.
Now that I've turned off that option, double-click in FF8 is back to the way it's supposed to work for quickly selecting a whole word or sentence.
If anyone else encounters this problem, I hope this information will help to resolve it. -
Why does double clicking not work in photos on my Mac Mini?
Why can I not open a photo by double clicking my mouse in Photos App?
Has nothing to do with ios6, the last update to the Facebook app did it. Mine has been like that for weeks on ios5.0
-
Why does "double clicking" onto a group expands sub-layers?
when i have an object that has sub-layers (i am assuming that illustrator creates these automatically), if i accidently double click the object, my layers pallet expands. I have to go back to layers pallet and collapse layer to resume work.
OK, the double click in an empty space helps, but I do not find "isolation mode" in my preferences. I'm running Illustrator CS2...is there another name for isolation mode? (help topic displayed nothing for this term)
thanks again -
Why does double clicking not open desktop folders?
After installing OpenOffice, my Mac Mini suddenly lost the ability to open desktop folders by double clicking.
Open Office does not have a de-installer that I can locate.
Please advise.
Thank you!You may have to log out and back into your account, or restart the computer, for the system to work correctly after a software installation; at times one could also try other things in what may be an exercise in futility just in case something comes from any frustration and accidentally helps resolve any issue that may be in hiding...
The 'safe boot' and 'repair disk permissions' and other antics sometimes will work to scare the gremlins out of a testy Mac. Or, perhaps it really is as simple as the man says. Adjust the mouse/trackpad in system preference? Could be the settings changed and it may be trying to interpret your clicks too fast.
I'd not tried 'open office' but some time ago did try the NeoOffice version and it was OK. Then again, so was old AppleWorks back in the day; unless you require some kind of need to parrot MS Office regularly.
Good luck & happy computing! -
If in the Windows Explorer of Windows 7 I double-click the name of a file that is mentioned as being a Firefox file by its file type symbol, it should be launched. But this doesn't happen. If I select "Open with" > Firefox" in the file's context menu, nothing happens. But if I select another browser, the file will be launched.
Hi,
You can try to right-click a file > '''Open with''' > '''Choose default program''' > '''Browse''' (disregard any existing entry) and select Firefox, and also enable (tick) '''Always use the selected program to open this kind of file'''. -
Why does option+click when on the brush tool set a background color?
Hello,
First question posted at Adobe so I hope this is in the right place. I am using CS5 and am finding that when I option+click when using the brush tool to select a color to brush with, it sets that color as my background color. I want it to set it to the foreground (obviously) so that I can immediately use the color I've just selected without having to swap the back to front.
I can not seem to find a setting to change this occurrence. Any help is greatly appreciated, thanks!Hello, this is not the help forum for Photoshop, select your platform on :
http://forums.adobe.com/community/photoshop/
Your issue is due to the fact that you have the background color targeted on the Color panel. Click on the Foreground color, and you will be good to go! -
having problem with my iphone camera,doesnt work when i click the camera app,but when i double click when my phone is locked it works.
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Why does firefox autostart when I switch computer on
why does firefox autostart when I switch computer on
[[Firefox launches automatically when your computer starts]]
If you have nothing Firefox related in your startup folder,
Your issue may be caused by Malware. You can run and update the following '''free''' anti virus software:
1. Malwarebytes (Free version) - http://www.malwarebytes.org
2. Spybot Search & Destroy - http://www.safer-networking.org
3.Spyware Terminator - http://www.spywareterminator.com
In addition, there are a number of forums you can use to help get rid of your infection. These include:
*[http://www.bleepingcomputer.com/forums/ Bleeping Computer]
*[http://forums.spybot.info/ Safer-Networking Forums]
*[http://www.spywarewarrior.com/index.php Spyware Warrior Forums]
*[http://www.spywarewarrior.com/index.php SpywareInfo Forums] -
Why does audio stop when pavilion 23xi sleeps (using Windows 8)
why does audio stop when pavilion 23xi sleeps (using Windows 8)?
Hello again @st3lla,
I can understand the fear of messing up a computer when I first started seriously working on computers back in the early 90's I had to format and re-install my operating system twice a day for quite a while before I figured out a very important step (at least important for me), and that was after I made a change to my computer to restart it. This way if I messed something up I only had to undo one thing and not 50 because I went wild on it. lol
Anyways, do not be afraid of your computer all you need to do is learn that step, how to keep your personal items backed up and then of course how to re-install your computer back to factory and you can always start over with a fresh build.
On to your questions:
Q - What are the steps to ensure that all HP updates are done.
A - Simply review the HP Support document: Using HP Support Assistant (Windows 8) and it will guide you through the process.
Q - What are the steps to ensure that all Windows updates are done?
A - Simply review the Microsoft Support document: Windows Update: Frequently Asked Questions and again you will find answers to this question. (***Note: Do not worry if the document refers to Windows 8.1 it is only an upgraded version of Windows 8 and the steps are the same)
I am also including a Windows Support document: Install the latest Windows 8.1 Update, which will guide you through how to install the Windows 8.1 update on your computer.
And finally, to put your mind at ease I am providing you with two important HP Support documents: Backing Up Your Files (Windows 8), and Performing an HP System Recovery (Windows 8), which will provide you with all the instructions you need to backup your personal files so you do not loose them if you ever do mess up the computer, as well as provide you with instructions on how to put your computer back to how it came from the factory.
Please re-post if you require additional support. Thank you once again for your post on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
Why does captivate hang when it is closed in window 8.1 professional ? How is it solved?
Hi,
Do you see the issue every time you close captivate or is it only in some scenarios? Does it show any error messages? What captivate version are you using (64 bit or 32 bit)? Can you provide some more information or screenshots which can help us reproduce the issue.
Tamish -
Why does Illustrator crash when saving to a new location on my new MacPro 13" Retina Pro running Yosemite?
That won't do. What I mean is you have to navigate to the file and make it active in pastebin and then copy the highlighted line like this
and paste that into your reply. -
Why does word startup when Mac is turned on?
Why does Word startup when computer is turned on? I looked in my startup menu and it is not there.
Hi I have a similar question. I checked Docl icon and Login Items. Nothing there.
When my computer boots up I have all Microsoft programs running (word, power point, excel).
Please help me, it's starting to drive me crazy.
I have also tried to see if I can disable it in microsoft itself, but no luck.
thanks -
Why does IE crash when opening a pdf file ?
Why does IE crash when opening a pdf file ?
I think this is done by the browser when it is saving a temporary file and there's already a file with that exact name in the temp folder.
Maybe you are looking for
-
Error attaching Adventureworks 2008 db to SQL Server 2008 [not R2]
Hi ppl, I have SQL Server 2008[NOT R2] installed in my laptop [Windows Vista Home Premium, 64 bit]. There are 2 issues: 1. Downloaded the AdventureWorks 2008_SR4 from the link : http://msftdbprodsamples.codeplex.com/releases/view/37109 . but wasn't
-
i downloaded firefox update, had nothing but troubles since, computer crashing when i try to open, or cursor lag for a long time ie. i try to move to do something it has to think about for 30 seconds to having to pushing reset to get anthing hapening
-
Query Builder results seem to max out at 500 lines. How to change?
Hi all, Some of out Application Express users are using the Query Builder tool for ad-hoc reporting. The idea is to run the SQL to extract the data, then download to MS Excel. The Query Builder results seem to max out at 500 lines. I want to increase
-
Column limits for Crystal Reports for Eclipse
Hi , Is there any column limits for Crystal Reports for Eclipse. While i am trying in my environment, if i am include more than 18 columns its wont show the preview as well as it throws error like as follows "java.lang.NullPointerException at sun.mis
-
DLU and local "Administrator" account
I have another network admin that has given me some information of the subject heading that I don't quite understand... They are using ZEN 3.2 with DLU on a Citrix server. This way, when a student logs in via Citrix and gets logged in, ZEN policies r