Why does Edge increase the size of the stage when I insert .oam via Dreamweaver?
I am creating a slider for a site's Home Page, and specified a Stage size of 960 x 255 pixels in my Edge Animate document. When I inserted the .oam file from Dreamweaver (Insert > Media), the dimensions grew to 980 x 275 pixels. Manually correcting the dimensions does not correct the problem. The width remains wider, and a gap exists between the bottom edge of my animate object and the border graphic that overlays the object.
How do I correctly specify the stage size so it remains at the size I specify once I insert the .oam file in my page?
Thanks,
Kevin
Provided feedback in this thread - http://forums.adobe.com/thread/1126857?tstart=0
Darrell
Similar Messages
-
Why does my .sparseimage file size not reflect the amount of data insde of it?
SUMMARY
I have an uncompressed sparese image file that has over 35GB of data inside of it, yet the image file always claims to be taking up 4.29GB of space on the drive on which it resides.
DETAILS
The image file was created with Disk Utility useing the following settings:
When I mount the image and Show Inspector for the contents, I see this:
However, when I Get Info on the image file itself, mounted or not, I get this:
I was expecting that the size of the file would be reported as roughly the same as the size of it's contents.
What gives?
-tHello, and thank you for the new reply.
I'm sorry to be slow with my responses, but I am wrapped up in the task of sorting out what has turned out to be over 100GB of photos and videos that I shot over the last ten years and have backed up all over the place ... I'm sorting through all of it and getting it all organized for the first time.
OK, here are the results of ls -lR@ /Volumes/Bin/
$ ls -lR@ /Volumes/Bin/
total 8382080
-rwxrwxrwx@ 1 <username> staff 4291448832 Nov 12 09:04 00000.MTS
com.apple.ResourceFork 286
drwxrwxrwx 32 <username> staff 1088 Jan 30 15:38 Misc
drwxr-xr-x 1638 <username> staff 55692 Mar 3 00:02 Images
drwxr-xr-x 922 <username> staff 31348 Mar 3 00:02 Videos
That'st the first bit, and there there are a zillion pages listing the contents of the top level directories. (Over 17k files)
Again, when I mount the sparseimage file, I see everything that I expect to see inside of it ... my backups of thousands of photos and hundreds of video files. I can view all of them, so the data is definitely there. This is why I am confused as to why the sparseimage file itself is being reported as so small!
I just noticed this ... there is a large video file in the root of the mounted image; 00000.MTS which happens to be 4.29GB in size ... everything else is located in one of the three directories that are listed. Now, the sparseimage happens to be reported as 4.29GB in size. That can't be a coincidence. Is the OS reporting the size of the sparseimage file based on the total reported contents of only the root directory? If so, that would explain why it shows as being 4.29GB. That would, however, be kind of a bug, no? Should it not report the size of the sparseimage as being the total size of all of the contents of the image?
As a test, I just moved that file into the Videos directory and then unmounted the image. bin.sparseimage is still reported as being 4.29GB.
Thanks,
-t -
Increase the size of the cache using the cache.size= number of pages ?
Hi All,
I am getting this error when I do load testing.
I have Connection pool for Sybase database that I am using in my JPD. I am using Database control of weblogic to call the Sybase Stored procedure.
I got following exception when I was doing load testing with 30 concurrent users.
Any idea why this exception is coming ?
thanks in advance
Hitesh
javax.ejb.EJBException: [WLI-Core:484047]Tracking MDB failed to acquire resources.
java.sql.SQLException: Cache Full. Current size is 2069 pages. Increase the size of the cache using the cache.size=<number of pages>
at com.pointbase.net.netJDBCPrimitives.handleResponse(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.handleJDBCObjectResponse(Unknown Source)
at com.pointbase.net.netJDBCConnection.prepareStatement(Unknown Source)
at weblogic.jdbc.common.internal.ConnectionEnv.makeStatement(ConnectionEnv.java:1133)
at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:917)
at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:905)
at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:350)
at weblogic.jdbc.wrapper.JTSConnection.prepareStatement(JTSConnection.java:479)
at com.bea.wli.management.tracking.TrackingMDB.getResources(TrackingMDB.java:86)
at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:141)
at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:115)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)hitesh Chauhan wrote:
Hi All,
I am getting this error when I do load testing.
I have Connection pool for Sybase database that I am using in my JPD. I am using Database control of weblogic to call the Sybase Stored procedure.
I got following exception when I was doing load testing with 30 concurrent users.
Any idea why this exception is coming ?
thanks in advance
Hitesh Hi. Please note below, the stacktrace and exception is coming from the
Pointbase DBMS, nothing to do with Sybase. It seems to be an issue
with a configurable limit for PointBase, that you are exceeding.
Please read the PointBase configuration documents, and/or configure
your MDBs to use Sybase.
Joe
>
javax.ejb.EJBException: [WLI-Core:484047]Tracking MDB failed to acquire resources.
java.sql.SQLException: Cache Full. Current size is 2069 pages. Increase the size of the cache using the cache.size=<number of pages>
at com.pointbase.net.netJDBCPrimitives.handleResponse(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.handleJDBCObjectResponse(Unknown Source)
at com.pointbase.net.netJDBCConnection.prepareStatement(Unknown Source)
at weblogic.jdbc.common.internal.ConnectionEnv.makeStatement(ConnectionEnv.java:1133)
at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:917)
at weblogic.jdbc.common.internal.ConnectionEnv.getCachedStatement(ConnectionEnv.java:905)
at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:350)
at weblogic.jdbc.wrapper.JTSConnection.prepareStatement(JTSConnection.java:479)
at com.bea.wli.management.tracking.TrackingMDB.getResources(TrackingMDB.java:86)
at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:141)
at com.bea.wli.management.tracking.TrackingMDB.onMessage(TrackingMDB.java:115)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:370)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:262)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2678)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:2598)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178) -
Using OS 7.02, is there a way to increase the size of the folders?
Before OS 7.02, I could place a number of application icons in a folder. After the "upgrade" I now am required to look through as many as three subfolders to find the icon. Can I either increase the size of the 1st folder displayed or decrease the size of the icon so I can fit more of them in the first folder?
I found the solution today on Microsoft's website. It worked for Illustrator but not for Photoshop. If Acrobat would stop crashing every time I open a file - or if someone on the forum could give me a solution to why it does - I could furnish the URL.
-
Is there a way to increase the size of the control panel?
I have a Surface Pro 2 and, on illustrator and Photoshop, the control panel is tiny. Is there a setting to increase the size of the control panel?
I found the solution today on Microsoft's website. It worked for Illustrator but not for Photoshop. If Acrobat would stop crashing every time I open a file - or if someone on the forum could give me a solution to why it does - I could furnish the URL.
-
How to Increase the size of the table?
Hi All:
I'm a newbie and i'm trying to understand how can I increase or set the size of the table. I want to display all the columns and rows of the table but for doing that I understand that the size of the tbale has to be increased . The following is the warning I would get when looking at the database. How can I get over it. Any suggestions?
The table GOESDBA.SAT_PARAM_VALUES contains more than 2000 rows. Displaying all the columns and rows of the table could be time-consuming.
best,
SriI'm migrating the database from Oracle to MySQL through a migration kit.I don't know anything about MySQL or your migration kit (this is an Oracle forum after all).
Is there some way that the size of the table can be increased on the oracle sideBut this doesn't make sense anyway. What you're saying is that the table is too large. So why would you want to make it larger? -
Increasing the size of the SGA
I'm using the Oracle Enterprise Manager Database Control on a 10.2.0.4 instance running on Redhat Enterprise Linux. One of the recommendations that the AWR\ADDM always seems to give is: "Increase the size of the SGA by setting the parameter SGA_TARGET to N". I've gone through the process twice already by upping the SGA_MAX_SIZE and SGA_TARGET parameters. It's currently recommending to up it to 6176M, I have not done this yet.
(1) Is this one of the recommendations that you would ignore within the DBCA if performance of the database seemed acceptable?
(2) Why does it always come back from the AWR\ADDM as a recommendation?
(3) What SQL or performance statistics does it do to determine whether the SGA is undersized and how does Oracle determine the SGA recommended size that shows up in the ADDM feedback?
Thanks in advance...Truely new questions do deserve new threads. Questions that are a direct result of responses to the initial question should be asked on the same thread.
If there has been a time gap between the last post on the initial thread and the new question coming to mind then a new thread is probably the better choice.
To answer the question asked if the database is not suffering ORA-04031 errors and performance is OK then I would ignore the recommendation to increase the size of the SGA yet again.
What you might want to do first is reivew how the sga is being used (v$sgastat) and look for bad code technique that leads to needing memory, i.e., the use of SQL that passes constants to Oracle in what would otherwise be the same SQL statement if a bind variable was used and excessive use of Dynamic SQL when again bind variables could have been used in the SQL.
IMHO -- Mark D Powell -- -
i'm using iphone 5 but its camera is not properly working. all the images i'm clicking are of dimension 600X800 and the size of the image is just 60-70 kb. now please tell me how to increase the dimension of images and its size.
''rojere [[#question-1055991|said]]''
<blockquote>
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type pretty fast so it gets annoying and yes it also jumps screens or reverts back to previous message and i have to choose ctrl z to undo and get back to my message i was typing... it also switches tabs on me as well... not sure why my palm being on the left of the keypad on the base should effect anything but it does after a while. and i have to stop what i am doing...and go to the firefox menu and change the screen size back down to 100% sometimes it goes up to 200-300 other times it goes down to 70-80% i find it annoying i i wish there was a way to turn off the screen resize in the setup panel. if its just left to be 100% i am happy with that... i don't need it to be bigger or smaller... there should be a way to LOCK it down... i understand that there are people out there with eye problems and needs to have the screen size increase using the + or - but there should be a lock so it just stays no matter what is happening on my keypad or touch pad or base of the pad... that screen size will not increase or decrease. unless i turn off the lock... perhaps this is something they can implement in the next version or do a quick update of the browser
</blockquote>
sorry that is all greek to me thanks for attempting to explain what you were trying to explain sorry i just not tech person to be able to understand or where to begin ... have good day and thanks for again trying -
Hi,
I am using an iPhone 5 (16GB) iOS 7.0.4.
Currently the size of the mail app is 1GB and is continously increasing, even though the advanced settings in the mail account have been set as following:
MOVE DISCARDED MESSAGES INTO:
Deleted Mailbox
DELETED MESSAGES:
Remove: After one day
INCOMING SETTINGS:
Delete from Server: When removed from Inbox
The problem that I am facing is that only a few emails reside on my iPhone as I keep deleting emails, which are also deleted from the server automatically because of the settings as above, which is perfectly fine. The emails are deleted from the Mail app and only a very few of them are visible which I have not deleted as yet, and all is fine till here. The problem is that the size of the Mail app is more than 1GB and is continously increasing, when i check the size of the Mail app in the Settings > General > Usage section.
When I search for an email that has previously been deleted from the search feature by swiping down in the main page, it still comes up in the search, and upon clicking the searched email, it takes me into the Mail app, however, the mail is not there. I have tried searching for emails which were deleted weeks ago, and they still come up in the search feature, however, they DO NOT open in the Mail app when i click them within the search feature in the main page.
Up until a couple of months ago, the size of the Mail app was about 5.2GB and at this point I had no space on my 16GB iPhone 5, therefore I resetted my phone two months ago, and after a complete reset of the iPhone 5, the size of the Mail app went back to 0.3KB (like it was brand new out-of the box); however, within a matter of two months the size of the Mail app has now exceeded 1GB and is continously increasing, as I receive alot of emails which is why I delete them on daily basis and even delete them from the Trash folder (mailbox).
I have read alot of blogs and even checked with other friends using similar settings on the same model, however, I just cant seem to figure this out. I would really appreciate if someone can help me with this issue as I dont want to have to reset it again after another 2-3 months.
There are practically only 14-15 emails on my Mail app with not alot of KBs for these emails, and the trash folder is also empty, but the size of the Mail app is still not reducing. Please help!!
Regards,
Shoaib MalikHave you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question. -
How to increase the size of the applet/ form displayed on the bowser
kindly guide me how to increase the size of the applet / forms displayed on the browseri.e the width and length of the forms/applet so that i can display all the controls on the form .
thanks with regardsi changed the value of width and height in formsweb.cfg file in my devsuite_home/forms/server/formsweb.cfg , i am able to see the result when i compile and run the form in devsuite, whereas the same is not reflected when i run the same form in application server.
when i tried to change the value of abbovementioned file in oracle_home /forms/server/formsweb.cfg of the application server file , the file does not have the applet wdth and applet height values. in fact this file does not have any applet information..
pls guide
thanks with regards. -
Is it possible to increase the size of the CURVES window?
Hello,
I am using LR 5 and love the CURVES tool.
But I find it a bit small... is there a way to increase its size or even, to send it to a full other monitor?
Ideas?
Thanks!NO Even dragging the panel wider does not change the size of the curves box, it just puts more gray space on each side. I agree it would be nice if the box got bigger when changing the panel size.
-
What does not affect the size of the classfile
Hi
does inclusion of extra whitespaces affect the size of the classfile (that gets created after compiling).
does inclusion of java comments increases the size of the classfile.
are there any other things that when included, does not affect the size of the classfile.
Madhu_1980Madhu_1980 wrote:
Hi
does inclusion of extra whitespaces affect the size of the classfile (that gets created after compiling).You can test this yourself easily.
>
does inclusion of java comments increases the size of the classfile.Another one you can test very easily.
>
are there any other things that when included, does not affect the size of the classfile.
Madhu_1980Shouldn't you be worried about getting your program working by using the right constructs rather than constructs which result in a smaller .class file?
Are you restricted on the sizes of your .class files? -
Please increase the size of the button "Send" for ...
I use the iPad mini. The program is very small Skype button to send the message "Send". Its hard to push. Places nearby lot. Please increase the size of the button "Send"
Yeah, I too think the send button size is stupidly small. Do the Skype developers actually use iOS or do they all use a stylus when doing so? I guess they all use Windows Phones considering things .
I think they read this thread and intentionally made the button smaller in the latest release and, what's whats with using the iOS Location 'arrow' (GPS usage symbol) as the send button? Is the icon meant to be a paper plane?
Additionally, in my case, there is no need to have the emoticon button next to the send button because I have the emoticon (additonal) keyboard configured, so I can use that is I don't know the actual key systax to get a smilely face. -
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?
It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.
Maybe you are looking for
-
Comparison between ABAP command statements in different versions
Hi, I'm looking for information on version wise difference in ABAP statements. Can someone provide help in this area. I need a list of Commands along with there syntax in different versions of ABAP (ECC 5.0 and 4.7). Is there any system table where t
-
Drag and Drop Midi file problem
Hi, I have a simple mid file downloaded from internet that quicktime plays perfectly well, however, when I try to drag and drop it into an empty logic 8 project, all I get is a simple track with virtually no midi info (and no sound whatsoever). Is th
-
How much data does MobileHot Spot use? Pandora?
I use mobile hotspot when i am in my room. Not much.. usually very quickly. Data? and I use Pandora while driving.. data?
-
i am unable to see downloaded iooks on my ipad
-
We are running MS 6.3-7.04 and have two types of users: 1. internal users that only send & receive e-mail on our LAN, 2. mobile users that access our mail servers using a laptop with a local mail client (i.e., not webmail). To disallow relaying, we r