Why does eLearning for PC not install when Presenter is included in the package?

I have downloaded eLearning from the Adobe LWS site, ran AAMEE 3.1 to create a 64 bit package. When I try to install the package with Presenter included the install process appears to be working. I can see the programs are being installed but at the end each program is un-installed and when msiexec.exe finishes nothing it installed.

Current e-learning systems focus on supporting the creation and presentation of learning materials. The communication between the learners, which is also an important factor for a successful learning experience

Similar Messages

WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD??

WHY DOES IT SAY BATTERY NOT CHARGING WHEN I TRY TO CHARGE MY IPAD ???

How are you trying to charge it, via a computer or the wall plug ? If a computer, then a lot of computers (especially older ones) generally do not provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.
If the wall charger then have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If that doesn't work then have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
And for info typing in capitals is considered SHOUTING.

Why does SMS tell me "not allowed" when I try to add an existing contact to one of my SMS Groups?

Why does SMS tell me "not allowed" when I try to add an existing contact?

If you are running Tiger, you don't have time machine.
You need to get something like SuperDuper! or Carbon Copy Cloner (sorry, I don't have a handy link for CCC but you can Google it to get their site) to make a clone of your drive on the external and then do incremental backups. The free versions do a lot and you can upgrade to the full-service versions for small change if you need more. The one time I used SuperDuper! for cloning a volume it worked just fine.
(My backup application is the last PPC capable version of Retrospect, which does a credible job, or has over the past ten-twelve years.)

Why does my ipad say "not charging" when plugged in?

Why does my ipad say "not charging," when plugged in?

http://support.apple.com/kb/HT4060
Read the KB article. Make sure you are using the 10W adapter that came with the iPad or a High-Power USB 2.0 port.

Why does 'check for updates' not work?

Just curious why the updates do not work? Is it just easier to download the release2?

Check for updates is intended for use after production when we might have small changes to 1-2 files. Our current releases have many changes to many files and might almost be as large as the download. Also, we are still making structural changes to the storage of the code (shifting around preferences, etc). For the Early Adopter Releases, we really want people to download and install in a clean directory. After production, we will support check for update.
-- Sharon

Why does Firefox for android spring open when I clear notifications or open files?

Motorola Moto G
Latest Firefox for android
Android KitKat
Why does Firefox spring open, even after I quit, because I have cleared notifications or opened a file I downloaded. I have double checked Firefox is NOT set to open images or videos automatically, es

ES File Manager is my default player for almost all media. Firefox is not set to default.
Here is a step by step.
I see a picture I like so I download it. Firefox has now sent me a notification that the download is complete. After eventually closing the browser, I then clear notifications. Upon doing so, Firefox opens, regardless of whether it was running in the background or truly closed.
Thanks

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Why does app mgr "fail to install" when it tries to update itself?

I have reinstalled the app mgr, as instructed on the CC web site, as it was supposedly corrupted (although it worked fine a couple of hours ago). Whenever I try to download PS CC, the app mgr goes through trying to update itself and "fails to install," so I can't even begin to download any other app. (Running Windows 7 on a Dell laptop, 64-bit. I have several CS6 apps.)

Arpit,
There is no app mgr in the Control Panel list of programs; it is gone. (Of
course, I've purchased the LR 5 upgrade, and it is not on the list either,
though it is installed, not from the Cloud, and seems to work.) There is a
newly downloaded app mgr 7.0 shortcut on my desktop, but it can't find the
program itself. There's an app mgr updater that runs its course; but since
the app can't be found, it's hard to know what it is updating. Trying to
download anything (even just the Creative Cloud desktop connection) from
the web site doesn't work--clicking a download button produces nothing at
all, not even an error message.
CC Cleaner does not give an option to clean the CC items without also
working on CS6 apps. I do NOT want to risk losing or corrupting my various
CS6 apps or the data associated with them.
My Cloud files are still fine, but I can't upload anything new or download
anything that's there.
There really needs to be a solution to this situation that does not require
large transfers of data or the risk of losing older (and functioning)
programs.

Why do I get SIMM Not Installed - when it is?

1-2 time/month I go to use my 3G iPhone and it has an error msg that I have no SIMM card. I no not receive calls or msgs - nor can I send. The fix is simple - I power off the iPhone and restart and the 3G network icon & signal strength both return to normal. But, why do I get this error? Unless I try to use the phone I do not know I have this problem - and anyone that calls goes immediately to voicemail - but I don't know that. My other concern is that this problem is going to increase in frequency. Is there a fix that prevents this? Secondarily, is this a iPhone issue or is this being caused by my AT&T network?

This could be a problem with the SIM card's connection to the iPhone - not being seated properly, or a problem with the SIM card. Have you tried removing and re-inserting the SIM card? If so with no change, stop by an AT&T corporate store explaining the problem and request a new SIM card. There should be no charge for this and the new SIM card can be activated with your iPhone at the store. If no change after this, there is a problem with your iPhone.

Why does "check for updates" not download new version of itunes?

On windows XP FP 3, if I start Itunes of late I get a messsage that there is a new (10.5.3) version of itunes to download. I agree to download iTunes, and itunes freezes up for a bit, then nothin. Suggestions? I am getting tired of uninstalling and reinstalling every time this happens.

Check for updates is intended for use after production when we might have small changes to 1-2 files. Our current releases have many changes to many files and might almost be as large as the download. Also, we are still making structural changes to the storage of the code (shifting around preferences, etc). For the Early Adopter Releases, we really want people to download and install in a clean directory. After production, we will support check for update.
-- Sharon

Why does my flash player not install?

My Flash Player will not install. I have first disabled my security firewall, then added adobe to exceptions. What is wrong?

Try clicking the link below and following the directions you will find on that page.
Click here
Best of luck to you in resolving your issue! Rick

Why does my Kernal_Task run so high when I first start up the computer

Okay...I recently found out that my macbook pro 13in late 2011, main problem is my Kernal_Task......I notice it started happening this past Saturday. Everytime I put it to sleep, my CPU kernal_task runs high of 204-396% which is not normal. Then my fans kick on afterward.....it does the same thing when I properly shut down the computer and start it back up again, with nothing running or open. I did the Disk Utilty of Repair Disk Premissions, and still it is an on going issue with the kernal_task. And before all this happened, I never had a problem of putting my macbook to sleep at night, and wake it up the next day. Sometimes, I don't shutdown until 3 or 4 weeks at time....but now, since my kernal_task is acting up, I was told I now have to shut it down when I am not using it, like a PC machine. Can anyone here give me suggestions to sovle the kernal_task problem, of having it go back to normal use at 2-5% of CPU use, instead of 204-396% of CPU use....I am hitting a wall and want to find out if I have to reinstall OS X Lion or not...
Thanks...

The kernel is using excessive processor cycles. Below is a partial list of causes for this condition.
Throttling
When it gets high temperature readings from the hardware, or a low-voltage reading from the battery, the kernel may try to compensate by interrupting the processor(s) to slow them down and reduce power consumption. This condition can be due to
a buildup of dust on the logic board
high ambient temperature
a worn-out or faulty battery in a portable
the malfunction of a cooling fan or sensor
Note that if the problem is caused by a sensor, there may be no actual overheating or undervoltage.
If the computer is portable, test with and without the AC adapter connected. If kernel_task hogs the processor only on battery power, the fault is in the battery or the logic board.
The Apple Hardware Test or Apple Diagnostics, though not very reliable, is sometimes able to detect a bad fan or sensor.
Installed software
User-installed software that includes a device driver or other kernel code may thrash the kernel. Some system-monitoring applications, such as "iStat," can also contribute to the problem. You can test for this possibility by completely disabling or removing the software according to the developer's instructions, or booting in safe mode. Note, however, that disabling a system modification without removing it or booting in safe mode may not be as easy as you think it is.
Corrupt NVRAM or SMC data
Sometimes the problem is cleared up by resetting the NVRAM or the SMC.
Peripherals
Connecting an external display to some MacBook Pro models via Thunderbolt may cause this issue. I don't know of a fix, other than to disconnect the display.
Encryption
Transferring large amounts of data to or from an encrypted disk image or FileVault volume may put an extra load on the kernel. If both the source and the destination are encrypted, the load may be doubled. If you transfer data from an encrypted disk image on an encrypted partition to another such image on another encrypted partition, the load may be quadrupled.
This issue probably doesn't affect late-model Macs with an Intel i-series, recent Xeon, or later processor. Those processors support hardware-accelerated encryption. You can determine what kind of processor you have by selecting About This Mac from the Apple menu in the menu bar.

Why does my iPod Nano only work when it is plugged into the computer?

My iPod nana is a 4GB iPod and it does not work at all until it is plugged into my computer. It works perfect when it is plugged into the computer. It will not even turn on if it is not plugged in.

By the sounds of it, the Nano's battery is shot and in need of a replacement. You can have replace the battery for a flat fee or send it to a third party repair company for a little less.
Not much else you can do in terms of troubleshooting this issue.
B-rock

Why does my footage gets cut off when i drop it in the timeline?

i preview my footage and it looks fine, but when i drop it in the time line it cuts alot off

Hi Duncananinthebrain,
Seems that the sequence settings you chose is not proper.
Please right click on the clip in the project panel & click new sequence from clip. Else you can drag & drop the clip from the project panel to the "new item" icon.
Try that & hopefully it will work.
Thanks

Why does my ITunes now get stuck when it can't find the album art?

I've noticed since yesterday when I bought my new IPod Touch my ITunes on my computer gets stuck when it can't find the album art for some music I have. It gets to that album and won't do anything, won't let me skip it or anything ... Anyone else having similar issues and if so any workaround?

Hi joanhello,
I understand that you are seeing an issue with iTunes fetching information about CDs you are importing. Here is an article for you that explains how to troubleshoot this issue:
iTunes 11 for Windows: If you don’t see song information
http://support.apple.com/kb/PH12488
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Why does eLearning for PC not install when Presenter is included in the package?

Similar Messages

Maybe you are looking for