Why does Email text not display, only the header?

When opening an email message, the text or graphics if applicable does not display. The messages display in my Inbox along with the Preview Pane, but when opened the text box is blank. Why?

Close out of the mail app, then double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

Similar Messages

TS1398 Why does my iPad2 not display the WiFi icon?

Why does my iPad2 not display the WiFi icon? I have implemented ALL of the troubleshooting tips, but my WiFi icon is still missing, and it will NOT recognize the internet connection that I know to work on my computer and iPhone.

Try the following:
1. Reset the AirPlay devices
2. Reboot the router
3. Reboot the iPad
Note: The AirPlay icon is now in the Control Center

Why does ichat video not connect? The error message says we did not respond.

Why does ichat video not connect? The error message says we did not respond.

Hi,
iChat uses several port as they are called over the internet to do different things
Text Chats and Video Chats are on different Ports.
You probably don't have the port open.
Use UPnP in your router if it has it.
8:59 PM Sunday; August 12, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Text not displayed in the Web Report

Hi All,
I have a query where user is expecting both Key and Text to displayed in the report for the Info object "Local Product High". This infoobject has text data available. But Iam not sure why this is not getting displayed even when I select both Key and Text in the properties screen.Only Key is getting displayed.
Can some one throw some light on this.
Regards,
Srinivas

I juct checked the Text table and I see the texts for the infoobject exists. I do not think CHange run will resolve this issue. but yes the master data is active .
I will now try to run the report through Bex and come back.
Thanks for the input..
regards,
Srinivas

Why does Apogee Jam not work with the Ipod Touch 4G

Hi,
I have a Apogge Jam an it works fine with my Mac Book, but it does not seem to be compatible with my Ipod Touch 4g.
Only the Gibbson L&M app recognize the Apogee Jam, but no other App (Ampkit, ....) :-((
With the IPhone 4 it shall work, can tell me anybody why Apogee Jam is not compatible with the Ipod Touch 4g (
although the Gibson-App works)?
Is there perhaps still other Apps which work with the Ipod Touch and Apogge Jam?
Thanks
Michael

I cannot answer the specifics, but I would guess it is a software issue because Griffin iTalk app will cooperate with the Apogee JAM on an iPod Touch 4g running iOS5. If this app can do it, then one would presume the other apps could be updated to do it also.
From last week up until yesterday, Apogee actually listed the 4G Touch as a compatible device with the JAM.
Apparently there was some confusion about Garageband now supporting iPod Touch and its functionality with JAM.

Why does my Blog not publish with the rest of my new pages and photos????

Much more work was done on my iWebsite today and I even made a rudimentary beginning of a blog.
QUESTION:
Why does my blog not publish?
Lorna in Southern California

James, the blog is on Safari now. I am embarrassed to say that I had already forgotten that I needed to make a link to the Site Menu. Since I had done all of that in a tear of activity previously, it's as though the process did not stick in my head. Sort of like forgetting to plug in the computer. 8-(
I did not even realize what I had done wrong until I made a hyperlink from that site to my site menu and checked to see that the blog became visible. It's disconcerting to think that this kind of thing could happen to me again. 8-(
I would be very interested in seeing people's blogs and how they use them. I've seen blogs used as news reports, blogs with music videos, blogs with photos. I earlier thought that a blog was like a diary: Words only.
Lorna in Southern California

Email text not displaying normally / links within email not functioning

All of a sudden, emails are not displaying normally; symbols and numbers are interspersed within words of emails, no graphics, no functioning links within emails on my BlackBerry Curve 8530. Verizon Wireless suggested I upgrade to a different phone. That's helpful.

Have you sent HTML emails to GMAIL, HOTMAIL and YAHOO accounts successfully before? Are those services capable of handling HTML formatted email? Not all email clients can handle that type of email.
OT

Why does my Videocast not appear in the iTunes Store

Hello,
i recently started an videocast and puplished it to iTunes, but until now you can only access the videocast by searching for it.
Why does not it appear in the Store while Browsing through the categories or in the "New" segment?
Below the feed for the videocast.
itpc://www.veoh.com/rss/collection/Wiideocast
Thanks in advance for your help
M4dC0w

Don't worry, this is a problem that I have experienced in submitting all of my podcasts, and I believe it all boils down to this.
The people behind the iTunes Music Store only select a few of the new podcasts that they personally like to appear in the "New and Notable" section. This is why in your podcast name and episode names, you should try to include key words that sum up your podcast/vodcast. For example, my podcast is one which supplies various DJ mixes - so I make sure to call my podcast "House Music - Dirty, Filthy & Electro House DJ Mixes" so it has a higher chance of coming up when people search "music", "DJ" or "electro".
I know it's annoying because to have your podcast or vodcast appear there would be very helpful in spreading the word about your podcast, but Apple just won't do it. I might suggest sending them an email asking how you would go about approving it for the "New and Notable" section, but I have never tried this so there's no guarantee of an answer, or even a reply.
Hope this all helps. Good luck with the vodcast.

Why an email address not show in the Bcc field in Send Items folder?

Hi,
My user use Office 2007 and Exchange 2008. She sent an email which Bcced to 4 people for example A, B, C and D. However when she opens this email in her Send Items folder within Outlook, it only shows A, B and C in the Bcc field, but if she opens this email
in OWA, she can see 4 people in the Bcc field. It is the exact the same email. Outlook is in online mode (not cashed mode). I don't understand what could be the problem. Why D isn't shown in the Bcc field within Outlook?
Please advise!
Thanks in advance!
Grace

Hi,
Since it's a Client-only issue, we can try starting Outlook in Safe Mode to determine if it's 3rd-party add-ins related:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
If there’s no problem in Safe Mode, disable the suspicious add-ins to verify which add-ins caused this issue.
I suppose the recipient D is not listed in the mail Filter lists?
http://office.microsoft.com/en-001/outlook-help/add-names-to-the-junk-e-mail-filter-lists-HA001230163.aspx
You can also test if this problem exists when you switch to Exchange Cached mode.
Regards,
Melon Chen
TechNet Community Support

Why does my G4 ibook display only work when it's partially open?

The display on my iBook G4 shows no video until I nearly close the lid. I can then see the display working but it is at an extreme angle. I'm thinking that it must be a contact problem, but cannot find any forum or troubleshooting support that address this issue. Does anyone know of a procedure to check and repair this?
Thanks in advance,
Randy

Randy,
I have repaired those inverter cables. The break is usually at the hinge point and often it's the red wire that breaks. If you open up the iBook (bottom case, top case (Be very careful with the power lead, it's easy to rip the socket off the logic board. I don't even attempt to unplug it, just free up the speaker cables and the power lead (blue and white) by pulling it free from the adhesive) and the top shield. (lots of patience required here to keep from bending the shield esp. near the top left). Often I'll just leave it connected and tape it to the display. You have to tease the inverter cable out and might have to remove the display to get full access. Note carefully how the cable is routed around the hinge. I tease the silver tape apart (often you can see the break - big black burned spot) so then I solder it back together, lots of tiny shrink tubing.
When I remove the top or bottom shield I'll tape the individual screws right to the shield near where they belong. 3M blue for this. That way reassembly is a no brainer. I used to measure the screw length w/ a metric rule and that took forever.
I also use a "black stick" that I made from a #3 black nylon propeller from the hobby shop. I cut it in half and tape the cut ends w/ self fusing electrical tape. The black stick is essential to releasing the tabs that hold the case together. Don't forget to release the one inside the battery compartment as I often find that one broken off in iBooks that come in for donation.
More if you email me but I won't be back in the shop until Saturday night.
Richard

Why does "enclosing folder" not work from the SEARCH window?

I do a command+F search.
Command+2 to view as list rather than groups
and then sort by date modified.
When I find the file/folder I want I'd really like to do a command+[up arrow] which in the GO menu is a valid command.
Why does this work in finder windows but not in the search window?
I'm not using spotlight, just the good old command+F
This used to work in Sherlock 1 [using command+E] and when you opened the enclosing window, the file was already hi-lighted, faster to locate and saved mousing.

You'll note that in the Go menu that command is grayed out meaning it's not active in the search results display.
If you upgrad to Leopard then you can go to the Finder's View menu and select "Show Path Bar." The full path to any selected item in the Finder's window will be displayed in a path bar in the lower portion of the window. You can then double-click on any displayed folder to open a window on that folder.

Why does my border not continue to the bottom of the column

On the right border of the right column at the bottom of my homepage, the border does not go all the way to the bottom of the column. I am not sure why. Do I have to do something in the CSS to identify that the columns need to be equal height? Or maybe it is something different.
http://www.reginazona.com

Because your padding bottom is not sufficient. I suggest, try to change one of your styles to look like this:
.frontColumn2 {
float:left;
width:50%;
padding: 2% 2% 11% 2%; /* change this line */
text-align:left;
border-right: 1px solid #000;
The item you need to change is bolded/commented in the above code.
I have kept everything as 2% but the bottom is changed to 11%.
Good luck.

HT202360 Why does email forwarding not work with external addresses?

I have tried to setup an internal email account which is meant to forward emails to an external account.
Under the account's mail options i have set "Mail should be: " to Forwarded and typed in the email address underneath. However, both with an external domain and the me.com domain it does not send the email. If i send an email directly from the accounts using my IMAP account the server has no problems sending the emails to the addresses.
The results of running sudo serveradmin command mail:command = getAutoForward is:
mail:<<id1>>:fwdAddress = "[email protected]"
mail:<<id2>>:fwdAddress = "[email protected]"
mail:<<id3>>:fwdAddress = "[email protected]"
Is there sometime i'm missing?

I have also tried adding a new email account with the [email protected] to see if it was the original account that was the problem, but the new email account doesn't send the emails on either.

Why does icloud mail not display clearly?

Why does my ipad 2 with icloud mail not clearly display my mail?

Depends on what "not display clearly" means.

Why does image animation not display in project preview or published?

Most of my slides involve 4 images. I've staggered their appearance at .3, .5, .7 and .9 seconds. All works well when I preview the individual slide. But previewing the project, or publishing it, results in them all appearing simultaneously at .0 seconds. How do I correct this?
Thanks,
bberg1

Thanks for your reply. I checked the timelines and they look correct. Of course, I can see the timelines only in the preview of the individual slides, when the animation works fine. Capturing the slide preview timelines would therefore not help with the problem. Once I preview the entire project, the timelines are not accessible, and the images 4 images appear all at once at .0 seconds rather than sequentially at .3. .5 .7 and .9 as in the slide preview. What is most puzzling is that some of my projects, with the same settings as far as I can determine, work just fine in both the slide only and project preview.
Bert

Why does Email text not display, only the header?

Similar Messages

Maybe you are looking for