Why does facetime only use a wireless network; isn't 3G the same thing?

I thought buying an iPad2 with wifi+3g would give me constant internet time.  Why does facetime only work with a wifi network?  Shouldn't the 3G "kick in" if there is no WiFi around?
My other problem is in the Photo's section: I've looked at the tutorials and read the sections on photo's in the ipad manual and I still cannot figure out how to label an album?
Any help in both of these areas would be greatly appreciated...Thank You!!
Paul J.

Yes.
Photos in the iPad's Camera Roll should be imported by your computer as with any other digital camera. These photos are included with the iPad's backup which is updated by iTunes as the first step during the iTunes sync process, but if these photos aren't imported by your computer and a problem develops with your iPad's backup in regards to this data and you restore your iPad with iTunes if wanted or needed, kiss these photos goodbye. The same if your iPad is lost or stolen and not replaced with another.
As with any other photos on your computer that are organized by events or albums selected to be transferred to your iPad, import these photos with your computer and organize the imported photos in the same way you organize any other photos imported from a digital camera, etc. Select the albums under the Photos tab for your iPad sync preferences followed by a sync.
This way you have the photos available on your computer's hard drive for access there as well along with being organized as you prefer, and which can be included with your computer's backup along with all other data.

Similar Messages

  • My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    My iphone has a problem, it simply does not work, the screen is all black with a few colorful scribbles and images blend, I used it only took 6 days and returned to service when operated only 7 more days and it happened again the same thing, what do I do?

    Reset the PRAM
    Reinstall the operating system from the dvd (you will not loose your data)

  • Why can't I send messages to my friends that have the same thing as me?  t

    Why can't I send messages to my friends that have the same thing as me? They can send to me. It says that they aren't registered and they are though.

    What phone do you have?  And how, exactly, are you trying to send pictures to Facebook?  It sounds like you need to log into Facebook on the phone or re-enter your username and password for Facebook.  Somehow the connection between your photos and Facebook has been lost, and you need to get them connected again (verify your login information)

  • My iphone 4s turns off and restarts after a few seconds or minutes to establish a FaceTime call. I've tried "Restore iPhone" but the same thing keeps happening. Any solution?

    My iphone 4s turns off and restarts itself a few seconds or minutes after when I establish a FaceTime call. I've tried "Restore iPhone" from iTunes but the same thing keeps happening. Any solution?

    Settings > General > Reset > Reset Network Settings
    Also, if this only happens with one Wi-Fi network, power cycle that Wi-Fi router.
    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order.

  • Why I couldn't use win7 wireless network

    I installed win7 in my mac book pro. The driver for the wireless network card was installed. I can find the network in my instittue, I even could input the code. But the connection could setup correctly, it failed. I have tried it for one day...
    Anyone could help me?
    Thanks.

    Thanks for your reply. However, the Win7 is OK, the lan network is OK. All seems to be OK except the failure of the connection for the wifi...

  • Why does Thunderbird hang when a login dialog is open at the same time as a file save dialog?

    This happens frequently. And if there is any open email I am composing at the same time, it is LOST. This appears to be a bug that would rarely trigger in the normal case, but I have several email accounts active at once and one of them sometimes throws up a login window. If I happen to simultaneously be trying to save an attachment, the save dialog pops up and neither "Save" nor "Cancel" buttons work anymore and it is impossible to get the login dialog to respond. Thunderbird cannot respond to window cycle requests, so I can't even get to the edit windows to screen-shot them. The only thing I can do is kill the process and lose everything.

    printscrn on the keyboard should still work unless the operating system is also dead.
    However, while it may be a bug please try the following steps to make sure.
    *Restart Thunderbird with add-ons disabled (Thunderbird Safe Mode). On the Help menu, click on "Restart with Add-ons Disabled". If Thunderbird works like normal, there is an Add-on or Theme interfering with normal operations. You will need to re-enable add-ons one at a time until you locate the offender.
    *Restart the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
    ; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

  • Does facetime only use email on ipad mini?

    If so, when I put in my email, it doesn't verify.  I have cellular with the ipad. It has a phone number. Do I use that. How do I enter that? All I see is my iphone number and no way to change it.

    I use my Apple ID email address and that should work for you as well, do you get an error message when trying to verify the email address?
    Turn off FaceTime and sign out of your Apple ID. Restart your iPad, turn FaceTime on again, sign in and then see if you can verify the email address. Your Apple ID email address should be verified with no problems at all.

  • Why does printer only use lg black pigment cartridge, becoming very expensive!!!

    We have the Canon PIXIMA MG5320 ink jet printer.  Our printer is using the large pigment cartridge (PGBK 225) for normal printing instead of the small one (BK 226) is this correct? We have never had to replace the small cartridge (BK226) and have had to replace the large pigment cartridge (PGBK225) at least every two (2) weeks, this is becoming quite expensive. Please advise us of how to use the small cartridge for normal printing instead of the pigment cartridge. We thought the pigment cartridge was for printing pictures!
    Thank you very much
    Mary

    Hello poornurse.
    The large 225BK black tank is a pigment based tank and is primarily used for standard black text printing or output. 
    The smaller black ink tank is dye based like the color inks, and is used for photo and graphics output. 
    You can adjust the quality setting to 'fast' in order to reduce the amount of ink that is used.  This will help conserve the ink used from the large black tank with your normal print jobs.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How can I use Easy Custom Device Tool to do the same thing LabVIEW the Basic Averaged DC-RMS VI does

    I am using a cRio 9024 and am reading PWM with a 9205 analog input card.  It was suggested that I use the Basic Averaged DC-RMS VI to convert the PWM signal voltage into an analog signal (RMS value) for use in my system.  The issue is that the 9024 cannot use LabVIEW models (it is VxWorks). I am working through the Easy Custom Device Tool, and wonder if someone can guide me in the right direction.
    Solved!
    Go to Solution.

    Hello,
    Can you give more details about your VeriStand configuration ? Are you using the Scan Interface (and thus the Scan Engine Custom Device) or are you using the FPGA of your cRIO chassis to access the I/O ?
    If you are programming the FPGA and using a FPGA Personalty in VeriStand you can probably add the calculations such as RMS to the FPGA code directly.
    If you are using the Scan Engine, you will need a custom device. The Easy Custom  Device Tool is just a tool, you will need to know more about what a custom device is and how to develop one:
    - http://www.ni.com/white-paper/12712/en/
    Regards
    Eric M. - Application Engineering Specialist
    Certified LabVIEW Architect
    Certified LabWindows™/CVI Developer

  • Whenever I right click on an image on a web page and select 'Save image as...', the filename always ends with '.jpg.jpeg' instead of '.jpg'. How do I stop Firefox doing this? It doesn't happen when I try the same thing with Internet Explorer

    It hasn't done this since I first installed Firefox, only the last month or so.
    I've tried running in Firefox safe mode with all extensions disabled but this makes no difference.
    I've also found the following article:
    http://kb.mozillazine.org/File_types_and_download_actions
    ...that suggests reseting the '''browser.download.pluginOverrideTypes''' & '''plugin.disable_full_page_plugin_for_types''' entries in about:config but I don't have these entries so can't reset them

    In that case you may need to look in the Windows registry with the registry editor (regedit.exe) to see if the problem is there.<br />
    You can do a search (Ctrl+F) for <b>jpg</b> after navigating to the HKCR\MIME\Database key.
    HKEY_CLASSES_ROOT\MIME\Database\Content Type

  • Does anyone know why i can only use my phone on speaker phone?

    My phone just started only working on speakerphone. Just wondering what are some tricks to get it to work correctly?

    Mine (iPhone 4 purchased in Feb of this year) did the same thing.  Here's what I tried.
    Reboot
    Reset via iTunes and reinstall
    *228 (verizon) programming (at this point you can see I was willing to try anything)
    then looked around on the web and found lots of people with the same problem.
    Called Verizon from a landline, went through all the steps they wanted to check at which point they transferred me to Apple.  Apple handle the warranty replacement.
    On the first transfer to Apple the call got dropped in the que,
    Called Verizon again, same thing happened, but this time the Verizon representative had the mindfullness to give me a direct number to Apple.
    Direct call to Apple and a person answered.  Told them Verizon had checked out the phone and had sent me for a replacement.  APPLE TOLD ME THE 90 DAY FREE TECH SUPPORT PERIOD HAD EXPIRED AND I WOULD NEED TO PURCHASE A ONE TIME TECH SUPPORT FOR $29.95 OR A LONG TERM ONE FOR $69.95.  I DECLINED THE OFFER AND CALLED VERIZON AGAIN.
    THERE IS NO DOUBT THAT VERIZON HAS THE VERY BEST CUSTOMER SERVICE IN THE INDUSTRY.  THEY SHIPPED A REPLACEMENT PHONE.  IT ARRIVED THE NEXT DAY.

  • When i login to yahoo, my first click results in the spinning wheel. Could i have a virus Or why does it only happen when i login to yahoo?

    When i login to yahoo, my first click results in the spinning wheel. Could i have a virus? Or why does it only happen when i login to yahoo?

    Firefox allows to select part of a word. You can select a word with a double click and use Shift + left click to set the end of the selection, so you need to click at the end of the last word instead of in it.

  • Why does iPhoto only import 3 year of photos from my iPad?

    Why does iPhoto only import 3 year of photos from my iPad? Is it possible to go all the way back to 2001? IOS 10.2, old iPd...

    iPhoto only imports from the Camera roll.
    There are 9 different versions of iPhoto and they run on 10 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • My DSL provider says they only allow one wireless network--

    My DSL provider says they only allow one wireless network. Can I do the following?
    My existing wireless network consists of a single DSL/ActionTec modem connected to an Airport Extreme (configured using two additional Airport Expresses for wireless printing and air-tunes). I have great wireless coverage all through my house. My office is in a detached building about 200 feet from my house. I want to tap into my existing wireless system by running a Cat5 cable to my office and set up another Airport Express (and two more airport expresses for printing and air-tunes for my office). Would this technically be considered two separate wireless networks if I run the Cat5 cable between the two Airport Extremes (since there would only be one connection to the ActionTec DSL modem)? Would my DSL provider know I have established a secondary wireless network? Would my DSL provider have any ability to prevent these two separate networks from working properly on one DSL line?

    It really doesn't make much difference. If you run it from your DSL modem, you will in effect have two separate networks, but they should still be able to talk to each other. If you run it from your Airport from the LAN prt, that will work too but the DHCP you will set up in your office will have to be different from your first Airport. For example: If your first Airport is set up to hand out IP addresses on the 10.0.1.X network, your office irrport will have as it's WAN IP 10.0.1.Y and the wirless IP Range will have to be something like 192.168.1.x. But again, it shouldn't make much of a difference either way. itunes etc, will still work.

  • Why does quicktime only export audio

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.

    Why does Quicktime only export audio when exporting .mov files? I used to do it all the time with this same version. Now it doesn't work. I see a lot of other posts asking the same question and no answers.
    MOV files are audio and/or video content wrapped in an MOV file container. The first step in solving your problem would be to determine what codec components were used to create the source files and then determine if they are still supported by you current system configutation and/or conversion work flow.

Maybe you are looking for

  • Printing a report and using the print dialog for it

    i already have the print dialog vi from NI. I am using the normal report generation toolkit for printing reports. But I want to give the user an option to choose the number of pages and landscape/portrait options. But how do I integrate the 2 so that

  • Trouble starting ipod (very low battery message) and loop

    Hello. I am having troble to start my ipod classic 5 generation. The message "please wait very low battery" (with an ipod with sad face) appears but the weird thing is that i just used it yesterday and i left it fully charged...but well. Then i try t

  • Pop up, UAC warning me of Firefox making program changes

    I am running Windows 7 Professional (64 bit) and every time I launch Firefox 4 I receive a pop up which asks me "Do you want to allow the following program to make changes to this computer?" I realize this is a part of the UAC, which "I'm not going t

  • BootCamp driver won´t work on my MacBook. How can I extract it from DVD?

    Hi folks. I´m new on BootCamp. After installing Windows XP SPII, witch works fine for me, I tryed to install the BootCam drivers. But: The Leopard DVD won´t start - like in the manual How can I extract the Drivers from the Leopard DVD to copy them to

  • Adding "\b" to a string. Please help!

    I can't get to add "\b" (backspace) to a string. When I try to print the string, "\b" shows up as a square. It's a java applet, and import is "import java.applet.*;" Please help fast, I appreciate greatly!