Why does Fast Color Corrector have a Mask Output option?

Fast Color Corrector has a Mask Output option. In other effects the Mask Output option is used to see the mask created with the Secondary Color Correction feature within the effects. Fast Color Corrector does not have a Secondary Color Correction option.

Well...we digress.
The Three-way Color Corrector Master wheel does not work the same way as the Fast Color Corrector color wheel. I think the Three-way Color Corrector Master control, overall, doesn't work properly. Try the following:
1) In the Three-way Color Corrector, select the Master Tonal Range and reduce Saturation to 0. There is still plenty of color information present.
2) With the Master Tonal Range selected, drag the Master Balance Magnitude to 100 degrees (keeping the Master Balance Gain at its default 20). Do the same with the Fast Color Corrector (using the same Balance Angle) and note how differently they behave. The Fast Color Corrector changes hue over all luminance levels. The Three-way Color Corrector Master control adjusts hue over what appears to be a sub-set of full luminance.
One other color wheel characteristic that I find confounding:
In most color wheels, 0 degrees is Red, 120 is Green, and 240 is blue. The numeric values increase counter-clockwise. OK, that is the norm. So why is it that with P Pro color wheels, Red is -110 degrees, Green is 130, and blue is 10? Or...looking at compass points: on the P Pro Color wheel, North is -90 degrees, East is minus or plus 0 degrees, South is 90, West is minus or plus 180?
Jeff

Similar Messages

Why does iPad 2 only have a 16 GB option?

Why does iPad 2 only have a 16 GB option?

You can get a refurb iPad 2 with 16GB, 32GB & 64GB.
What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
 Cheers, Tom

Why does Adobe Muse not have a MOBILE landscape option? This should be included!

My clients sometimes want me to adjust the landscape mobile version and I cannot, this shouldn't be a problem!

The Mini DisplayPort wasn't developed until late 2008. http://en.wikipedia.org/wiki/Mini_DisplayPort Until then all MacBooks had the Mini-DVI port
The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
As for connecting to your TV it depends on what input plug you'll be using on your TV. VGA, DVI, Composite or HDMI. You'll need a Mini-DVI adapter and a cable from that to your TV. Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
(Composite is the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs.)
You'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs for VGA, DVI or Composite. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macbo o k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable
If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

HT4623 why does my ipad not have the software update option?

hey so I think my iPad 2 needs an update but im not really sure i like cant find out what ios operating system its running on

That is only a feature of iOS 5 or later... If you have iOS 4...as your tag states...
See Here...
http://support.apple.com/kb/HT4972
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Premiere Pro Freezes mac while rendering Fast Color Corrector & Rgb curves

I am having a problem that is impacting our business. We are doing commercials that we are doing color correction of the subject using Fast Color Corrector and RGB curves. When these effects are added to the sequenced video, the performance of the Mac Pro slows down considerably.
Then when we go to render the project so that we can see the effects in real time, the computer freezes completely. The program usually informs us that it must close due to a serious error. I have attempted to restart the computer, clean up permissions etc to solve this problem but to no avail. Why would this happen? Any ideas on how to solve it?
Here are the specs:
Using Premiere Pro CC 7.2.1 (4)
Mac Pro: 3.2 Ghz Quad-Core Intel Xeon
Memory: 24 GB
ATI Radeon HD 5770 (1024 MB)
OS: 10.8.5

Yes. I experimented on my own and got confirms from a couple of sources. Where the problem was is bad suggestions about what settings to use in Premiere Pro.
The first setting you want to check (although Premiere Pro will probably see the card right away is:
File > Project Settings > General - Make sure that Mercury Playback Engine GPU Acceleration is selected. Everyone agrees on this.
Now is where the fun begins. There is a school of thought that says to go here:
Sequence > Sequence Setttings - Under Video Previews, they want you to check off Maximum Render Quality. Once you do this, you must also go to:
Preferences > Memory - and change Optimize Rendering for Performance
DO NOT DO THIS! What I found is that this significantly slows down your system and makes rendering and exporting take over your computer (and I have a lot of ram). Leave your change with the setting Mercury Playback Engine GPU Acceleration and you should be great.
I have found a significant change in running color correction effects, exporting and rendering. You will too.
Let me know how you make out after your setup.
Have a great day!

Fast Color Corrector not rendering in final output

I have a stack of effects setup in order to create a wipe-on glow effect. I'm using Fast Color Corrector, Gausian Blur and Crop. When I playback the project in Premiere Pro CC, it plays back correctly (at least, the way I'd like it to look). However, Adobe Media Encoder is not encoding the Fast Color Corrector, which effectively makes my wipe-on look lame. Both Gaussian Blur and Crop seem to be working, here is the correct (Premiere) and incorrect (AME) screenshot. Notice the "OD" in the word "Good".
All effects and all video tracks are enabled. Anyone know anything about this and how I might force AME to take notice and render all of the effects?
By the way, I just tried "Export" instead of using Adobe Media Encoder. It works. Why doesn't it render correctly in AME?

My best guess is that AME isn't using GPU acceleration, which means things get rendered differently.
Either go Direct, or check Maximum Render Quality.

Error Compiling when using RGB Color Corrector and Unsharp Mask

If I apply the RGB Color Corrector and and Unsharp mask to a clip within a sequence and try to render the sequence or a small portion of the work area I get the Error Compiling: Unknown error.
This is occurring within a project I have updated to Premiere CS6 from Premiere CS5.
I have tried creating a new sequence and importing the same clip and other clips. Anytime I try to use both the Unsharp Mask and RGB Color Corrector I am unable to render. I have tried this with Mercury Playback both in hardware and software modes with the same result.
Has anyone else seen something like this?

Okay, glad this occurs for others too and I am not experiencing something isolated. The issue here is this shouldn't be happening at all.
Premiere CS5 has no problem with this.
Yeah if I turn off one effect or the other no problem. Unfortunately it doesn't matter the order I place the effects in I get the same error regardless of which is placed first.
Nesting does work. If I create a sequence, apply one or the other to the clip in the sequence then embed the sequence in another sequence and apply the remaining filter to the sequence containing the clip then I can get my color correction and edge definition. But this is a work around.
There seems to a bug here since there were no issues when using RGB Color Corrector and Unsharp Mask simultaneously applied to one clip in CS5. I doubt there will be a fix for this anytime soon so it looks like I will have to use another method for color correcting or apply RGB color correction to clips already embedded in a sequence as I move forward into solely using CS6.
(How this can become an issue is that after applying effects and color correction to several clips within a sequence I like to render that entire sequence. Then this sequence is ebedded in another main sequence and I can add additional effects and transitions and overlays without killing the live playback speed and only have to render smaller amounts of content from additional tracks. It ends up saving a lot of time after the initial length of rendering.)
Thanks for the suggestions.

Why does the color and or tone of my image change?

Why does the color and or tone of my image change after working in LR for a couple of hours? I open LR and everything looks fine - work for a couple of hours on the same shoot - but then the pictures start to look flat or greenish cast as time goes by. All the files get flat and the greenish cast after a couple of hours - the ones already worked on and the newer ones I'm pulling up to work on. RAW files downloaded from a Canon 30D. Also exporting to PSCS2 as PROPhoto results in a flat image. I switched back to export AdobeRGB.

Hola - thanks for the reply - yep - closing and then opening LR helps - but can't do that all the time after processing 3 or 4 files.
One reply was a corrupt monitor color profile - So I deleted that one and loaded a new adobeRGB profile. That helped a little also for a while - I then reloaded my monitor drivers and refreshed them - that help for a day - the greenish cast is back It works fine on my laptop for now. The same pictures that look greenish in LR look great in Canon DPP. So it probably wasn't the color profile or monitor drivers. My issue started with the small scale previews so I bumped that up. Still have the issue. I finished up a project and now going to uninstall and reinstall LR. Let's see what happens with a fresh install. andy.

Fast Color Corrector Edit Effects to a Video Clip --- need help, please

I am editing a single video clip. The clip is too dark, even though I used a video light. Classroom in a Book, page 298 recommends to apply the Fast Color Corrector. I tried...BUT as book reads, the color corrector wheel should pop up and allows changes to color.????
Please help. With Thanks. Please reply with help to me by e-mail...[email protected]
Larry

Hello Mr. Hoecker:
Thanks very much for your reply and advice. I am enclosing photos to show that:
I can NOT see anything by clicking on the grey triangles.
In “Fast Color Corrector” I do NOT see a section which says…”Input Levels”
Perhaps my install of CS 6 is missing some software. I will re-install and see until you can reply on this.
This is a page from the single clip I need to lighten so the face and black dive suit shows better.
FYI: I have been an Adobe subscriber and user since there was Adobe. I try to use the Classroom in a book for CS 5 and CS 6. When stumped, I go into the book and try to find a fix. In this situation, the little triangles, etc. are NOT there where I can see them. And…YES there is a LOT that I do not know.
Many thanks.
Larry McKenna

Why does my color look so different in CS5 compared to CS4?

Hi everyone,
I am currently working on a document in InDesign CS5...have placed some CMYK artwork that I created in Photoshop CS5. All of my color settings are synchronized. Why does the color in the artwork look SO different compared to Photoshop? If I place the same artwork into InDesign CS4, everything matches as it should (once again, all applications use the same color settings/are synchronized).
I am completely baffled...what am I missing? Is there another setting I have missed out on within InDesign?
Thank you,
Christine

Okay....you are not going to believe this!! Perhaps this is a bug or perhaps this is a one-time-mystery-of-the-unexplained thing.
I went into my desktop version of CS5 and loaded completely different color settings...pressed okay, then went BACK straight away and reloaded my usual [custom] color settings and all suddenly looked PERFECT. [I am going to have to verify this when I go into work tomorrow as I just tested via remote login so am looking at things via my macbook screen. The color difference was VERY noticeable at first between the two ID versions on my desktop so I was able to easily tell. Now they look the same.
All in all, than you SO much for your help (so this was *not* a waste of time). All this troubleshooting really helped me a lot as to what to look for in future similar instances.
Christine

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

Why does the color red change from working with images in develop to library? The color gets lighter and nothing shows a change on histogram but visually you can see it.

That's probably a broken display profile. The conversion from Library's Adobe RGB is different than the conversion from Develop's linear ProPhoto, so if there's a problem with the display profile it can show up this way.
Recalibrate, or if you don't have a calibrator use sRGB. If your monitor is a wide gamut model use Adobe RGB.
Assuming Windows, change it in Control Panel > Color Management > Devices, and relaunch Lightroom so that it can pick up the new profile at startup:

Why does the color wheel come up when I I can't get rid of it.

Why does the color wheel come up when I try to open an email? I can't get rid of it unless I sign in again!

The spinning beach ball of death (SBBOD) can be caused by many things. Common causes are not enough RAM, insufficient HD space or another process using a lot of the CPU's power. You can open Activity Monitor (Applications - Utilities - Activity Monitor) for many things including the %CPU column to see if there is an app using a large %CPU. Also click the System Memory tab and see how much FREE RAM it shows. As a general rule your system should have 500MB or more available.
Finally I'd recommend reading and using the Spinning Beach Ball of Death article for additonal troubleshooting steps.

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

Why does itunes in France have a complete lack of english language content on the TV programmes... prefering to release dubbed programmes and not the original english language content, surely it will cost nothing to release both?

Why does itunes in France have a complete lack of english language content... prefering to release dubbed programmes and not the original english language content?
It would be just as easy to release both a dubbed version and then a subtitled version.
I am a native english speaker but live in France. My father has just moved over to live with me in France and speaks very little French.
The price for a television series is very often more than a dvd box set but does not offer language options.
My French is passable but I would still prefer to hear the programme in English.
Using itunes uk is not an option as my cards are french or english with a french postal address.
The content has been adapted for the french site all i want is to access the original.
The series i have been trying to buy is HBOs 'boardwalk empire'.
The stupid thing is to please my father i would buy up most the HBO, BBC and Channel 4 content a cost of a couple of thousand euros.

Try giving Apple feedback: http://www.apple.com/feedback and also contact the Apple headquarters at http://www.apple.com/contact We are all fellow users and not Apple employees and often raise questions like yours ourselves. If enough make Apple aware of a market/need then something may be done about it.
France has come a very long way with regard to other languages. When I lived in France, mid-880s, there was an entire Ministry devoted to the purity of the French language...that was the time the PC came out. A TV news person was cashiered for using the term 'computer' on-air instead of the French created word 'ordinateur'. They took the language extremely seriously at that time. At least today there is recognition and even use of English by the masses

Why does front row not have simple organization?

I currently have a hard drive hooked into my macmini which is hooked up to my TV. On my hard drive I have over 1000 movies, all purchased through iTunes. However when I use front row and i goto the movie section, I have to scroll through every movie to get to the one I want. There's no way to scroll by letter, only one by one. This is horrible and takes forever. Can apple do an update that makes the right button on the apple remote for scrolling letter by letter. For example, you click the right button to goto movies starting with B, C, D, E, F, etc. Then the down button for one by one scrolling. Also, why does front row not have genres? AppleTV does. Why not incorporate that into front row? Think, Apple, Think.

You can have sub-folders in the Movies folder and arrange your movies alphabetically that way.
But if you want to alert Apple to your idea, then use this link:
Where to send product feedback to Apple:
http://www.apple.com/feedback/

Why does Fast Color Corrector have a Mask Output option?

Similar Messages

Maybe you are looking for