Why does FMP show my husband's location one day and not the next?

At my wits end!
No idea why this happens & we are on same iCloud acct & it's on

Hi Roger,
Welcome to the Apple Dicsussion Pages.
The Alcatel Speedtouch 585 proabably has version 5 firmware on there. I see form your post you know what the problem is.
This can be the problem.
Earlier modes in the 500 series had Firmware versions 3 and 4 which meant you could telnet into them form the Terminal Application and Unbind SIP from port 5060.
This is what is causing the problem.
The symptoms are a starnge pattern of succss and failure.
A small group you can contact all the time
An equally small group of now and then success
And a large group of Buddies that you can never get AV chats with.
ibosie who posts here says he has been in caontact with Alcatel and that they are working on a Firmware update to get round this.
At this stage another modem would be the way to go. (the 510 and the 580 can be Unbound)
Ralph

Similar Messages

  • Why does my airport go unrecognizable one day and work the next

    yesterday i was controlling the music through my reciever with my iPhone.  Now i can't b/c it doesn't recognize that I even have an airport

    Make sure all of your songs have a checkmark next to the song title. There are small blue boxes that need to be checked for songs to play consecutively.
    If the library is unchecked, you can easily recheck things by clicking on a song, going to the top line selecting Edit>Select All, then right clicking on the selection and choosing "Check Selection".

  • My facetime and imessage are not working! They were literally were working one minute and not the next!  I have reset (NOT RESTORED) my ipod, however these 2 apple apps are not working now, anyone have any idea why???

    My ipod touch seems to have a few issues, however my pre-installed and updated imessage and facetime were literally working last night, and after a breif break to charge battery (the back of the ipod was SUPER HOT) wasn't able to do facetime or imessage, and am STILL NOT today, what gives?? Any suggestions and advice?.

    Found the answer, at least for now!  Thanks to roryjt, and having to search through tons of post on imessage and facetime issues!  Changed the DNS on my ipod for my wireless network to 8.8.8.8   Not sure if it will work outside of my wireless network, but since its an ipod, not an iphone, I usually only use it in my place/on my network.  Below is a link to the thread by roryjt.
    https://discussions.apple.com/message/16674964#16674964

  • Why does my ipod sometimes flashes white then shuts down and then the only way to restart is to restore?

    why does my ipod sometimes flashes white then shuts down and then the only way to restart is to restore?

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Why Macromedia web site installs old version 9.0.115 and not the new 9.0.124?

    Why Macromedia web site installs old version 9.0.115 and not
    the new 9.0.124? I want the new version, but I can't get it!!!
    Please fix the servers!
    The download page says it's avaible the new version 9.0.124,
    but after the installation I have the old 9.0.115.

    Works fine for me on both Mac & Windows (Ie and
    Firefox...)
    As of April 8, 2008 developers can file Flash Player bugs in
    the Flash Player Public Bug and Issue Management System.
    https://bugs.adobe.com/flashplayer/
    For further details, read: “About the Public Bug
    Base”
    http://www.adobe.com/devnet/logged_in/tmccauley_fplayer_bugbase.html
    Please file a bug there.

  • Why does disc show as filled with only one small file added?

    I'm also new to Apple.  I've a MacBook Pro - Snow Leopard 10.6.8.  I've checked the documentation and help information and followed the instructios.  The blank CD-R  shows as (CD-R;  BLANK - Yes; ERASEABLE - Yes; OVERWRITABLE - Yes; APPENDABLE- yes).  I wrote one small file to the CD using the Burn Folder.  The file was on the CD, but all available space was used with zero remaining.   The disc is not erasable.  One response to an earlier question to look for multisesson recorder and select leave disc appendable or look for a triangle in top right.  Could not find this.  I'm sure this is another area where I'm just looking in the wrong place for instruction.  Any help is appreciated.

    See these instructions:
    https://discussions.apple.com/thread/1515120
    Note, you will likely have to start with a new blank CD.  Once burnt without appendability selected, it often can't be appended in the future.

  • Why does wireless work for one laptop and not the other?

    I have two laptops:
    1) MacBook: 10.4.8, Airport Exteme (Firmware 1.0.46)
    2) G4: 10.3.9, Airport Extreme (405.1 (3.90.0.p18)
    I have the two machines sitting right next to each other in my apartment. Machine #1 has full wireless signal strength. Machine #2 barely has any wireless signal. Neither is running Interference Robustness. Any ideas why one would work and the other would not, or suggestions as to how to debug this problem?
    I have tried stopping and restarting the Airport Extreme card on machine #2. I have also tried power cycling machine #2. This does not fix the problem.
    A little more history: for a long time I was having problems with machine #2 dropping the wireless connection. As part of trying to work around these problems I turned on Interference Robustness on machine #2. This fixed the dropping signal problem, but left me with weak signal strength. I shut off Interference Robustnes but ever since then the signal has still been weak on machine #2.
    Mac Mini Duo 1.66 GHz, 2 GB   Mac OS X (10.4.6)  

    The base station uses a single channel which all clients must use to connect.
    Have you checked the antenna connection into the card? Many people are surprised about how far the wire is actually supposed to be pushed into the card. Compare the connection with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

  • Why does audio in clip end up as Audio 5 and not 1?

    After importing a file and adding it to the timeline, the audio track is assigned Audio 5 and not Audio 1.  In order to get it to Audio one, I have been deleting "all empty tracks".  This results in Audio 5 track becoming Audio 1.  What am I doing wrong?  Is there a preference which I missed.
    My workflow is as follows.  Import clip, drag to Program Sequence window, which adds it to the timeline and thus Audio 5 becomes the clip's audio track.
    MacPro (1,1), OS 10.6.3,

    You can tell the channel-count of an Audio Track by looking in the upper-right of the Track's Header. There are three icons: a single "speaker" (mono/i-channel), two "speakers" (2-channel/stereo) and 5.1 for 6-channel 5.1.
    If you do not have the correct channel-count Track, PrPro will create one, with the proper channel-count, automatically, when you drag such a Clip to the Timeline.
    Good luck,
    Hunt
    PS - if you find that you use certain channel-count Assets often, you can set the appropriate number of those as the default. My default Sequence is 2 mono, 4 stereo and 1 5.1 w/ 5.1 Master. If I do not use all of those in that Sequence (do not use the 5.1 that much), I just Delete Unused Tracks. In the default arrangement, mono will be first, stereo next followed by 5.1. However, you can Add Tracks (and spot them to several locations), to get any order that you want. As my mono Tracks are often SFX, I might NOT create them in the New Sequence, but instead add them down at the bottom, keeping my stereo Tracks up at the top. Choices, choices, choices.

  • Why does Firefox keep me logged into websites after closing and reopening the browser?

    As of today, Firefox has been behaving differently. Namely, when I close Firefox and reopen, I am still logged in to email and other sites. I have all of my privacy settings checked, such as clear history, offline data, form history, etc etc so that they all will be deleted upon closing but this has no effect. Can someone provide insight as to why this is happening and how I can correct it? Before today, after closing and reopening the browser I was required to log in to any sites requiring UN and PW.
    I have rechecked all history deletion options to make sure all the appropriate ones were selected. Yesterday, I noticed inbox.com and a program called 24x7 Help were installed on the computer, without my knowledge. I promptly uninstalled them,but I'm not sure if they could somehow be responsible for the odd behavior.

    Such a behavior indicates that you keep the cookie(s) that verify that you are logged on to a web server.
    Are you using session restore to open those tabs automatically?
    * Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"
    You can set the <b>browser.sessionstore.privacy_level</b> pref to 2 (never) or 1 (non-HTTPS, default in Firefox 3 versions) on the <b>about:config</b> page to disable saving cookies via session restore.
    You can change the browser.sessionstore.privacy_level_deferred pref that is used when you do not reopen the previous session automatically via "Show my windows and tabs from last time".
    * http://kb.mozillazine.org/browser.sessionstore.privacy_level
    *http://kb.mozillazine.org/about:config

  • Why does my N97 mini RM-555 have a qwertz and not ...

    Hey guys
    I was just wondering why my Nokia N97 mini has a QWERTZ keypad and not a QWERTY keypad.
    It's a RM-555. I don't understand, the Y and Z keys have swapped places, doesn't make sense to me!
    Solved!
    Go to Solution.

    Standard European N97 mini's have QWERTY keyboards, it's only the ones that are designed to be sold in Germany (and a couple of other countries) that have QWERTZ keyboards.
    You should return it to where you bought it and request a qwerty version.  If that is not an option you can visit a nokia care point and pay to have the phone converted to QWERTY.  You can find details of your nearest care point via the "contact us" link near the top of the page.
    Some care points may refuse to carry out this procedure so you may have to try more than one. 

  • Why does iPhoto 8.1.2 work on one iMac but not another when both are the same spec both running Mavericks 10.9.1?

    I have a studio of 7 iMacs all running Mavericks 10.9.1, six of the machines are able to open iPhoto 8.2.1 but for some reason after updating the seventh, iPhoto vanished completely from that machine. I reinstalled it from a copy I had saved on a HDD but it now says it's unsupported with this version of OSX. I don't want to pay the £10 + for a piece of software that is only being used to import photos from the occasional iPhone so wont be installing the new version, especially as I know 8.2.1 does work on Mavericks.
    Any suggestions?
    Many thanks

    Reinstall v8 from the install disk as, at a guess, the version of the HDD is missing components.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Why do Camera Raw mods show in Bridge CS6 on one machine but not the other?

    Bridge CS6 and Photoshop CS6 are activated on our two MacBooks.  Before adding the second activation, image modifications performed in Camera Raw (8.4.0.199) would show in Bridge on our MacBook Pro.  Since then, they don't show on our MacBook Pro but do show on our MacBook Air.  On both machines, when we launch an image from Bridge, the modifications show in the Camera Raw window.  Is there a setting that we have inadvertenty modified on the MacBook Pro, that controls whether Bridge displays Camera Raw modifications?
    Interesting related factoid: the "Camera Raw Preferences" item in the "Abobe Bridge CS6" menu does nothing on our MacBook Pro but works normally on our MacBook Air.  It's like Bridge doesn't know that Camera Raw is around (?)

    This file fixed my problem: Camera Raw.plugin.zip
    It was a flaw un the latest Camera Raw updare, as described in the thread
    http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html

  • Why does itunes match work on some of my devices and not others

    I have a Iphone 4, Iphone, Ipad 2, and a new Ipad.  recently i purchased itunes match and everything seems to work fine... then the new ipad lost all music.  all other devices are working properly.  it shows the music, but all tracks are 0:00 and cannot do anything with it.

    Sounds like a simple local file corruption.  Would suggest re-installation of the application.

  • I have renewed my membership via prepaid card. Why does it still say that my membership is expired and not letting me use any applications?

    I had a year long prepaid subscription that was up in August. I bought another prepaid subscription (student edition), and I renewed online. However, my account still has not registered that I have renewed, and I cannot access any of my applications. When looking at the account settings/manage account menu, my account reads that I have a subscription to be renewed August 2015, as if I have renewed and everything. But, my bill does not register that I have paid for it. My desktop add-on also does not register that I have renewed. If I go to renew again, a message prompts that this card has already been redeemed (which I did back in August). How to I get my account to register that I do have a subscription!?

    Sign in, activation, or connection errors | CS5.5 and later
    For anything else contact support by web chat.
    Mylenium

  • Why does CC now sign out several times a day and applications revert to trial mode almost instantly?

    Since the last update my Creative Cloud connection signs itself out several times a day. Applications continuously revert to trial mode and need to be relicensed. I cannot stress how annoying it is to be reading a PDF only for Acrobat to close and then be invited to start my "trial". Whilst this doesn't actually stop my use of the Adobe applications it is very disruptive to my normal work flow. What I struggle to understand is why the appliactions so quickly revert to trial mode. Surely even if the CC connection is lost they should remain licensed for days?
    Running Windows 7 and the main apps I use are Illustrator CS6, Illustrator CC, Photoshop CS6, Photoshop CC & Acrobat XI Pro.
    Richard

    Jo: hello
    Jagadish: Hi Jo .
    Jo: Since I last updated Photoshop some weeks ago, connection signs itself out several times a day. Applications continuously revert to trial mode and need to be re-licensed.
    Jo: I can see this was mentioned in a forum a couple of years ago but can't see there was a definate solution
    Jo: I spoke to someone here yesterday, they had me sign out of creative cloud and back in, but that froze my computer, as all adobe programs do at the moment, and the chat window disappeared
    Jo: I have tried the things suggested on this page https://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    Jo: except for Download the IMSLib Replacer, because the link is broken
    Jo: which i mentioned yesterday, but it would appear it has not been fixed
    Jagadish: I understand that you wish to activate software .
    Jo Wickham: Oh my gosh no

Maybe you are looking for