Why does GarageBand reverse my vocal effects the "effected" part of the vocal is sounding as the main recorded part, and vice-versa.
The "effected" part of the vocal (track echo) is sounding as if it's the main recorded part, and vice-versa. This is happening with every track that's recorded as a real instrument...
Thanx!
Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.
Similar Messages
-
The Home button on my iPod Touch is very unresponsive. It takes several tries to activate it. While doing so, it responds to one click versus the intended two clicks and vice versa. It is a very frustrating process. Any suggestions? I already tried the "shut off" process that was suggested on the Apple site, but that did not help.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Why does HashMap.java use transient for the collection of key and value?
I just took a look at source code of HashMap.java.
It uses the variable "table" to store the keys and values.
This vairalbe is transient, but any hashmap can be serialized and deserialized.
Could you please help me clarify how it could happen that the transient variable can be serialized?The 'table' might be transient, but its content, or current data content of the map, shoud be somehow saved/restored in the serializing/deserializing code of the HashMap.
-
I have seen this posted before without resolution on one of the old operating systems. Does anyone have a solution to this. How to we get Apple to fix this if there is no solution?
I have seen this posted before without resolution on one of the old operating systems. Does anyone have a solution to this. How to we get Apple to fix this if there is no solution?
-
I have updated all software on my iPad and iTunes in my PC. Now when syncing my pics and music folders one or the other folder is always dropped. I should have an unused capacity of 2Gig after transfer on my 14Gig capacity machine. How do I get the ipad to retain both folders like it did before the software updates?
Try the following:
Open iTunes on your computer, go to Edit>Preferences>Devices, click on your most recent iPad backup in the Backups list and click Delete Backup.
Further down on the Devices screen, click Reset Sync History.
Connect your iPad and try syncing again. -
Providing WS in ABAP and consuming the WS in JAVA and vice-versa
Hi Folks,
Pls help me in creating the below mentioned scenarios.
1) Providing Webservice in ABAP and Consuming in JAVA.
2) Providing Webservice in JAVA and consuming in ABAP.
Also...pls let me know what are the system requirements for the above 2 scenarios...
Cheers...
Ram.Ram,
if you take that little effort to SEARCH this website, you'll be rewarded with dozens of blogs, whitepapers, technical articles and forum discussions elabaroting just what you are looking for.
you can find the search box in the right upper corner.
hava a nice day,
anton -
Why does GarageBand audio work for guest user but not my account?
Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband . -
Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problemsLook, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely. -
Why does Bridge always lose track of the Favorites folders I put into it?
(Latest version of Bridge)
I haven't used Bridge in a while because of this problem.
When you click on one of your Favorites folders in the panel on the far
left side, the folder comes up with a question mark and it can't find anything!
Why does this happen?
Even though the original location of the files or folders was never moved or renamed.. Bridge loses track of the folders I put into it?
How do I keep it from doing that?Here's the boilerplate text referenced by Omke;
I still advocate Repairing Permissions (with Apple's Disk Utility) before AND after any system update or upgrade, as well as before AND after installing any software that requires an installer that asks for your password.
I have seen software installations go sour because the installer did not find everything as and where it should be.
I have also seen software installations go bad because the installer did not clean up after itself properly and did not leave everything as and where it should be.
This is just my own personal opinion and practice based on my own observations. Others may disagree and that's OK. I can only base my routines and my advice to others on my own experience and conclusion. I don't pretend to know why others believe otherwise.
Repairing Permissions after the fact (i. e. not immediately before and after an install) may NOT help. Try it anyway, though.
====
Additionally, if your machine does not run 24/7 so that it runs the daily, weekly and monthly Cron Scripts in the middle of the night as intended by Apple, run Cocktail (shareware) as well.
Cron Scripts are maintenance routines designed by Apple to run on a daily, weekly and monthly basis in the middle of the night.
If you don't run them, you WILL run into trouble, sooner rather than later.
Here's an excerpt from the Apple tech doc http://docs.info.apple.com/article.html?artnum=107388
Mac OS X performs background maintenance tasks at certain times if the computer is not in sleep mode. If your computer is shut down or in sleep at the designated times, the maintenance does not occur. In that case, you may want or need to run these manually.
Mac OS X periodically runs background tasks that, in part, remove system files that are no longer needed. This includes purging older information from log files or deleting certain temporary items. These tasks do not run if the computer is shut down or in sleep mode. If the tasks do not run, it is possible that certain log files (such as system.log) may become very large.
Also, from: http://docs.info.apple.com/article.html?artnum=106978
The disk activity generated by find is a normal part of file system maintenance, used for tasks such as removing invisible temporary files that are used by the system. It is scheduled to occur early in the morning at 03:15 everyday, 04:30 on Saturdays, and 05:30 on the first day of each month.
NOTE:
There have been comments to the effect that Apple "fixed" this in 10.4.2 and later versions of the OS, but I have not been able to verify this to my satisfaction. The reference in the 10.4.2 release notes are far from explicit on this subject.
= = =
If you have DiskWarrior, run it regularly too. -
Why does IOS 7 enlarge pictures for the wallpaper and then disallow you to make them smaller to fit the screen?
Now correct me if I'm wrong but I am sure I have read that the parallax effect in iOS 7 is the main reason behind wallpapers not being able to be shrunk. However, even disabling the effect will not allow you to resize the pictures like you could in previous versions of iOS, so as Skydiver119 said, it kind of is a glitch. If you are like me, and don't regularly change your wallpaper, then it may be worth creating a photoshop document which is slightly larger than your screen resolution(400px in each direction or so) and then placing your picture to suit, before copying it your device. Obviously, this would not be ideal if you were changing your wallpaper daily or very regularly as it would be a bit of a hassle having to do this every time you wanted to change your wallpaper.
Hope this Helps! -
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?
It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.
-
Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.
What operating system do you have on your computer?
-
Why does my iPhone 4GS bounce of the TV
Why does my iPhone 4S bounce of the TV (not flatscreen, old thick Philips) when I put the iPhone on top of it? It happens after some time, perhaps 20 minutes. The phone bounces of the TV and lands on the floor. The TV is off!
Hi,
That sounds like attention seeking behaviour.
Step over it and ignore the antics.
When it behaves in the fashion you expect it is OK to pick it up and follow the normal nurturing you use.
If you do respond to it you will soon find yourself planning a zip line from your upstairs bedroom to the kitchen, coupled with a refusal to get in your pocket when you are ready to leave the house.
7:32 PM Thursday; June 14, 2012
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
When I click on a website in my Reader list in Safari, why does Top Sites open rather than the website I've clicked on?
Go step by step and test.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Delete Cookies
Safari > Preferences > Privacy > Cookies and other website data:
Click “Remove All Website Data”.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Maybe you are looking for
-
Extreme base station worked, but no internet,... now locked out.
Situation: Cable modem connected to Extreme base station. Powerbook G4 with 10.3.9 and iMac with 10.3.9 connected by airport to base station. This has been working for more then a year. This morning I had no internet connection on the G4 or the iMac.
-
Macros with Photoshop Elements 8
I am trying Photoshop Elements 8 and would also try a Macro (Action). But there is no "assistant" in the editor and under Windows 7 I can not find the directory to place the .atn file. It is not on the place, it should be under Windows XP or Vista So
-
I just received a new Ipod classic as a gift. I am having a lot of trouble trying to find tv's and movies to download, and answers on how to do it when I find these...I'm in Canada...I hope this purchase wasn't a waste....help!
-
Replacing SuperDrive in a PowerMac G5
Just a quick follow up question. Thanks in advance for any assistance. I recently purchased a new Samsung drive that I haven't been able to install yet because apparently I need a hex head to remove the screws at the bottom of the original. My questi
-
Inbound MATMAS: layout from Non-SAP system
Hi I would like to know how the layout of the inbound MATMAS file(xlm/flatfile) should look like and how will i be able to trigger an inbound update of MATMAS from an external non-SAP system without a middleware system? Giovanni Message was edited by